Manualios.com

Wohler MPEG-3270 Operation & User’s Manual

Wohler MPEG-3270 Manual Online:

4.7, 2658 votes
Wohler MPEG-3270 User Manual
Wohler MPEG-3270 User Guide
Wohler MPEG-3270 Online Manual

Text of Wohler MPEG-3270 User Guide:

  • Wohler MPEG-3270, 8 21 06 8: M PE G-3 27 0 & 42 9 0 U se r Gu ide © 20 13 Wohl er Tec hn ol ogi e s, In c . A ll r igh ts re se rved. 27 Ch apt er 3 Operation Scr ee n S ave r Adjust button, the first item in the following list appears on the screen for adjustment. Pressing the Volume knob switches to each successive item: 1. Backlight: Rotate the Volume knob to adjust the screen brightness on a scale of 15% to 100%. 2. Video Blend: Rotate the Volume knob to adjust the transparency of the on-screen displays and menus on a 30% to 100% scale. 3. Contrast: Rotate the Volume knob to adjust the video contrast on a 40% to 100% scale. 4. Red: Rotate the Volume knob to adjust the red level on

  • 8 21 06 8 : MPE G-3 2 70 & 4 29 0 U s er Gui de © 2 013 Woh le r Te ch no lo gie s, Inc . All rig ht s res er v ed. 22 Ch apt er 3 O pe ra ti on Ini tia lly P ow e rin g Initially Powering When the MPEG-3270 or MPEG-4290 is powered for the very first time, it will look to the SDI-A input as its source. Thereafter, it will power up with the input tha

  • Wohler MPEG-3270, 8 21 06 8 : MPE G-3 2 70 & 4 29 0 U s er Gui de © 2 013 Woh le r Te ch no lo gie s, Inc . All rig ht s res er v ed. ii © 2013 Wohler Technologies, Inc. All rights reserved. This publication is protected by federal copyright law. No part of this publication may be copied or distributed, stored in a retrieval system, or translated into any human or computer language in any form or by any means electronic, mechanical, manual, magnetic, or otherwise, or disclosed to third parties without the express written permission of Wohler Technologies. Repro

  • Wohler MPEG-3270, 8 21 06 8: M PE G-3 27 0 & 42 9 0 U se r Gu ide © 20 13 Wohl er Tec hn ol ogi e s, In c . A ll r igh ts re se rved. iii Table of Contents Chapter 1. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction ...................................................................1 Overview..................................................................1 Topics ......................................................................1 Safety......................................................................2 Important Safety Instructions .....................................2 Safety S

  • Wohler MPEG-3270, 8 21 06 8: M PE G-3 27 0 & 42 9 0 U se r Gu ide © 20 13 Wohl er Tec hn ol ogi e s, In c . A ll r igh ts re se rved. v MPEG Menu ..................................................................47 Chapter 5. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 49 Introduction .................................................................49 Overview................................................................49 Topics ....................................................................49 Specifications ...............................................................50 Compliance.............................................

  • Wohler MPEG-3270, 8 21 06 8: M PE G-3 27 0 & 42 9 0 U se r Gu ide © 20 13 Wohl er Tec hn ol ogi e s, In c . A ll r igh ts re se rved. 17 Ch apt er 2 Quick Start Se tt in g up I np ut s 3. If it is not connected already, connect the ASI source to SDI/ASI A IN. Press the SDI/ASI button repeatedly to light the A LED. ASI A: will be indicated in the upper left corner of the screen: 4. When you see ASI-A:TSSync in the upper left corner of the screen, the signal has been recognized. 5. Press the Menu button to open the Main Menu. Rotate the Volume

  • Wohler MPEG-3270, 8 21 06 8 : MPE G-3 2 70 & 4 29 0 U s er Gui de © 2 013 Woh le r Te ch no lo gie s, Inc . All rig ht s res er v ed. 30 Ch apt er 4 C o nfi gu ra tio n Us in g the Me n u S ys te m Using the Menu System The Menu System consists of a tree of menus which list the various options and setting that can be customized for your use. The Menu Tree is shown in Figure 4–1. Figure 4–1 MPEG-3270 & MPEG 4290 Menu Tree Pressing the Menu button enters the Menu System. The first menu that you see is the Main Menu. Most of the other menus can be accessed from the Main Menu, which appears

  • Wohler MPEG-3270, 8 21 06 8: M PE G-3 27 0 & 42 9 0 U se r Gu ide © 20 13 Wohl er Tec hn ol ogi e s, In c . A ll r igh ts re se rved. 9 C ha p t e r 1 Installation Fro n t P a nel • F3 button is labeled IMD. It is planned in future software releases that this function button will, by default, control the appearance of IMD displays, however in the current software release, this button is unassigned. • F4 - F6 buttons are unassigned, but may be easily assigned to control various functions. Refer to the Functions Menu on pag

  • Wohler MPEG-3270, 8 21 06 8 : MPE G-3 2 70 & 4 29 0 U s er Gui de © 2 013 Woh le r Te ch no lo gie s, Inc . All rig ht s res er v ed. 8 Ch apt er 1 In st al la ti on Fro nt P a nel Figure 1–5 MPEG-4290 Screen Controls (One Set Per Screen) • Power: Each of the two Power buttons turns its associated LCD screen on and off. During startup, the power indicator blinks. When the display is ready, it will stop blinking and remain on. Note that it does take some time for each screen to power up. Refer to Power Buttons on page 22 for

  • Wohler MPEG-3270, 82 1 06 8: M PEG -3 27 0 & 42 90 U se r Gu ide © 2 0 1 3 Wohl er Tec hno lo gi e s, In c. All r igh ts re ser v ed. 49 CHAPTER 5 Specifications Introduction Overview Specifications, compliance information, and a block diagram of the MPEG-3270 and MPEG-4290 are provided in this chapter. Topics ‘ Topics Page Introduction 49 Specifications 50 Compliance 54 Technical Functional Overview 54

  • Wohler MPEG-3270, 8 21 06 8 : MPE G-3 2 70 & 4 29 0 U s er Gui de © 2 013 Woh le r Te ch no lo gie s, Inc . All rig ht s res er v ed. 56 Ch apt er 5 Sp ec if i ca ti o ns Tec h ni c al F un c tio n al Ov er v ie w Figure 5–15 MPEG-4290 Block Diagram

  • Wohler MPEG-3270, 8 21 06 8 : MPE G-3 2 70 & 4 29 0 U s er Gui de © 2 013 Woh le r Te ch no lo gie s, Inc . All rig ht s res er v ed. 24 Ch apt er 3 O pe ra ti on MP EG S cre e n O p er at io n Figure 3–1 MPEG Screen This screen is used to monitor and make selections from the MPEG transport stream. In the MPEG Screen, the Volume knob can be rotated and pressed to access the following items: 1. PID Type: The PID Type (Program or Packet Identification Type) offers a choice of SI (Service Information) PIDs or PMT (Program Map Table) PIDs. Rotate the Volume knob to select SI PIDs or PMT PIDs and then press. Th

  • Wohler MPEG-3270, 8 21 06 8 : MPE G-3 2 70 & 4 29 0 U s er Gui de © 2 013 Woh le r Te ch no lo gie s, Inc . All rig ht s res er v ed. 52 Ch apt er 5 Sp ec if i ca ti o ns Sp eci fi ca t io n s The acceptable signal input formats are listed below. Table 5–4 Acceptable Signal Input Formats Category Signal Types 3G-SDI (SMPTE-425M, Level A) SMPTE-274: 1080p (60/59.94/50) HD-SDI (SMPTE-292) SMPTE-296M: 720p (60/59.94/50/ 30/29.97/25/24/ 23.98) SMPTE-260M: 1035i (60/59.94) SMPTE-274: 1080i (60/59.94/

  • Wohler MPEG-3270, 8 21 06 8 : MPE G-3 2 70 & 4 29 0 U s er Gui de © 2 013 Woh le r Te ch no lo gie s, Inc . All rig ht s res er v ed. 16 Ch apt er 2 Q uic k Sta r t Se tt in g up I np ut s 3. If it is not connected already, connect the SDI source to SDI/ASI A IN. Press the SDI/ASI button repeatedly to light the A LED. SDI A: will be indicated in the upper left corner of the screen. 4. When the SDI signal is recognized, it will appear on the screen. Monitoring an ASI Stream 1. Press the Menu button to open the Main Menu. Rotate the Volume knob to highlight the System Menu selection and press it to enter the System Menu. 2. Turn the Volume knob to BNC Port A and press it once. No

  • 8 21 06 8: M PE G-3 27 0 & 42 9 0 U se r Gu ide © 20 13 Wohl er Tec hn ol ogi e s, In c . A ll r igh ts re se rved. 55 Ch apt er 5 Specifications Tec h n ic a l F u nc ti on al O ve rv ie w Figure 5–14 MPEG-3270 Block Diagram

  • Wohler MPEG-3270, 8 21 06 8 : MPE G-3 2 70 & 4 29 0 U s er Gui de © 2 013 Woh le r Te ch no lo gie s, Inc . All rig ht s res er v ed. 12 Ch apt er 1 In st al la ti on Re a r Pa ne l Co nne c to rs • Cooling Fan: Please do not obstruct the airflow from these two quiet fans. • Power (DC): To provide power to the unit, attach the supplied 100 to 240VAC power supply, which will supply 24VDC to this connector. Im p ort an t: A signal input is defined to be a dry contact closure to ground for the General Purpose Inputs as well as for the

  • Wohler MPEG-3270, 8 21 06 8: M PE G-3 27 0 & 42 9 0 U se r Gu ide © 20 13 Wohl er Tec hn ol ogi e s, In c . A ll r igh ts re se rved. 41 Ch apt er 4 Configuration O SD Me n u OSD Menu The OSD (On Screen Display) Menu sets up time-outs and positions for various text displays. The OSD Menu is shown in Figure 4–9. Figure 4–9 OSD Menu Rotate the Volume knob to highlight the item to be adjusted, and then press to enter it. Again rotate the Volume knob to the option selection and press to choose it: 1. Source ID: The Source ID display shows the type of input that is being displayed. This display can be set to Off, On, or to only display for 5 seconds a

  • Wohler MPEG-3270, 8 21 06 8 : MPE G-3 2 70 & 4 29 0 U s er Gui de © 2 013 Woh le r Te ch no lo gie s, Inc . All rig ht s res er v ed. iv Chapter 3. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Introduction..................................................................21 Overview ................................................................21 Topics ....................................................................21 Initially Powering...........................................................22 Power Buttons...............................................................

  • 8 21 06 8 : MPE G-3 2 70 & 4 29 0 U s er Gui de © 2 013 Woh le r Te ch no lo gie s, Inc . All rig ht s res er v ed. 28 Ch apt er 3 O pe ra ti on Sa v in g Yo u r O pti o ns Saving Your Options When power is switched off or otherwise lost, the current option settings in the MPEG-3270 or MPEG-4290 are preserved and are still in effect when po

  • Wohler MPEG-3270, 8 21 06 8 : MPE G-3 2 70 & 4 29 0 U s er Gui de © 2 013 Woh le r Te ch no lo gie s, Inc . All rig ht s res er v ed. 6 Ch apt er 1 In st al la ti on Fro nt P a nel • Speakers: Speakers on either side of the unit deliver sound from the selected video input. Pressing or turning the Volume control of a screen will automatically switch the audio in the speakers and headphones to the audio from that screen’s selected audio channels. • Headphone Jack (Mini 1/8”): This jack allows you to monitor the assigned left/right stereo audio channels with stereo headphones from this mini-stereo connector. • USB: This port allows you to connect a flash driv

Related Products and Documents (Baby Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 LG NB3520A Specifications lg/nb3520a-D84.pdf 27 Dec 2023 2
2 Teac E24E Operation & user’s manual teac/e24e-EQ7.pdf 18 Nov 2022 74 1.62 Mb
3 Sharper Image MSG-F110 Instruction manual sharper-image/msg-f110-KP1.pdf 15 Sep 2023 16
4 Gianni Industries GEM PSB series Specifications gianni-industries/gem-psb-series-VAW.pdf 20 Dec 2022 2 0.21 Mb
5 Audiovox RVMPKG3 Owner's manual audiovox/rvmpkg3-G7J.pdf 29 Feb 2024 5 0.13 Mb
6 KIP KIP C7800 Operation & user’s manual kip/kip-c7800-P7H.pdf 10 Dec 2022 67

Similar Resources:

  • Philips

    Avent SCD570/00

    (328 pages)
    IT Manuale utente 169NL Gebruiksaanwijzing 193NO Brukerhåndbok 217PT Manual do utilizador 240SV Användarhandbok 264TR  AR 327EN  DA Brugervejledning 25DE Benutzerhandbuch 47EL  …
  • Summer

    Baby Pixel

    (2 pages)
    Thank you for purchasing the Baby Pixel™ Digital Color Video Monitor by Summer Infant. Please read the following instructions and warnings carefully. Keep this instruction manual for future reference. Moonlite™ Night Vision BoostThe MoonliteTM Night Vision Boost feature is to help provide better viewing of your baby, temporarily, when the room is dark. …
  • Philips

    SCD505/00

    (15 pages)
    SCD505 EN User manual 3BG  CS  ET  HR  HU � …
  • Konig

    HC-BM10

    (86 pages)
    HC-BM10/11MANUAL (p. 2)Baby MonitorMODE D’EMPLOI (p. 14)Baby MonitorMANUALE (p. 26)Baby MonitorBRUKSANVISNING (s. 50)Elektronisk barnvaktMANUAL DE UTILIZARE (p. 62)Aparat monitorizare copiiBRUGERVEJLEDNING (p. 74)Baby overvågningssystemHASZNÁLATI ÚTMUTATÓ (o. 38.)BébiőrzőKÄYTTÖOHJE (s. 44)ItkuhälytinANLEITUNG (s. 8)Baby MonitorGEBRUIKSAANWIJZING …
  • VTech

    VM312

    (2 pages)
    Adjust the sound sensitivity of the baby unitYou can choose to hear sounds from the baby unit all the time, or to hear sounds that exceed a certain level. You can use the parent unit to adjust the microphone sensitivity of your baby unit. The higher the sensitivity level, the more sensitive the baby unit is in detecting sounds for transmitting to the parent …
  • Motorola

    MBP161TIMER

    (14 pages)
    EU ENMODELS: MBP161TIMERMBP161TIMER-2QUICK START GUIDEFor a full explanation of all features and instructions, please refer to the User’s Guide.1. Setting up your Digital Baby Monitor1. Insert the DC plug of the power adapter with the bigger DC plug into the DC jack on the back of the baby unit, as shown.2. Connect the other end of the power adapter to a s …

Comments, Questions and Opinions: