Manualios.com

a2b MyM-3T mictro master Installation Manual

a2b MyM-3T mictro master Manual Online:

4, 1252 votes
a2b MyM-3T mictro master User Manual
a2b MyM-3T mictro master User Guide
a2b MyM-3T mictro master Online Manual

Text of a2b MyM-3T mictro master User Guide:

  • a2b MyM-3T mictro master, 21 6 Menu settings with buttons cont. English 6.2.5 Channel indicator The MyM Channel indicator can be switched On or Off. When the channel indicator is On, a text box with ”MyM 1”, “MyM 2” and “MyM 3” will be shown in the upper right corner of the picture on the three output RF channels. After installation, channel indicators is automatically switched on for 8 hours to make it easier to do a channel search on the TV’s. During normal operation, the channel indicator is Off. 6.2.6 Output audio type In this menu it’s possible to choose between differ

  • a2b MyM-3T mictro master, 99 English 5.2 Input settings As the MyM-3T contains 2 separate tuners, start by selecting [Tuner 1] for chosing tuner frequency for programs at Ch1 and Ch2 RF output. Click on the [Tuner 2] banner to select tuner frequency for program at Ch 3 RF output. [Bandwidth] can be selected between 6, 7 or 8 MHz. Chose [Channel name] or write the center frequency of the wanted Mux and click on [Set]. NOTE! Don’t click on the [Set] if Channel name are used for choosing input frequency. 5 Menus and settings (continued)

  • a2b MyM-3T mictro master, 10 English 5.3 Output settings Modulation/ Band Start the output setup by selecting which band you want to use. You can select VHF-7, VHF-8 and UHF. VHF-7 and VHF-8 corresponds to 7 and 8 MHz bandwidth. After selection press [Set]. Frequency For each of the 3 possible output channels, set the desired output channel or frequency. Channel Indicator Name You can set the “Channel Indicator name” by your personal preference. The Channel Indicator will enable you to detect on a TV-screen which programs

  • a2b MyM-3T mictro master, 18 6 Menu settings with buttons cont. English 6.1.6 National – Audio language This menu is used to set your preference for audio language, when a TV program is broadcast in more than one language. 6.1.7 National – Menu language This menu is used to set your preference for the language used in all menus in the MyM-3T.

  • a2b MyM-3T mictro master, 17 English 6 Menu settings with buttons cont. 6.1.5.1 Type Use this menu to choose between normal subtitling or special subtitling for the hearing impaired. This offers enlarged subtitles and colour coded text. Alternatively all the subtitling can be switched off. The MyM-3T is preset to “Normal”. 6.1.5.2 Language In this menu you select what language that should be used for subtitling. NOTE! There are more choices than you can see in the window. Scroll up or down to see all choices. 6.1.5 National – Subtitling cont

  • 20 6 Menu settings with buttons cont. English 6.2.3 Quality This menu is used to test the signal quality and the aerial reception quality. It may be necessary to adjust or upgrade the TV aerial to ensure good picture and sound on all channels. For more information see Chapter 8.2.3.1 Reception. The MyM-3T has an inbuilt spectrum analyser to help optimise th

  • 55 English 1. Antenna input Connect the terrestrial signal to this connector 2. Aerial loop through You can connect this connector to next MyM-T for input signal. 3. Power connector Connect the supplied power supply to this connector 4. Common Interface 1 Insert a Common Interface module into this slot (Supports decryption for Channel 1 and 2) 5. Common Interface 2

  • a2b MyM-3T mictro master, 13 5.6 System options Upload/Upgrade The Upgrade menu is used to be able to download software Upgrades or future software functionality. The procedure of downloading a new software looks as described below: 1.Download the appropriate file from our web page to your PC. 2.Browse for the file in the MyM-3T User Interface. 3.Press [Upload] 4.Wait 2 minutes. 5.Make a power reboot of the MyM- 3T 6.Finished The Upload menu shows current files downloaded into the units and can be useful when contacting A2B support. Uptime The

  • a2b MyM-3T mictro master, 14 IP settings This section shows current IP-address, Netmask and Gateway settings. Remember to change settings if the default IP-address is used by other devices in your network. In case you have forgotten your IP-address please consult the A2B support web site and download free of charge our tool “IP-supporter”. This tool finds all MyM-3T and their respective IP-addresses available in your network. Also remember to press [Apply settings] when ready. Reboot MyM-3T Pressing [Reboot unit] re-starts the MyM-3T.

  • a2b MyM-3T mictro master, 19 6 Menu settings with buttons cont. 6.2 Advanced settings In the advanced settings menu you will find settings for Aspect ratio, Output channels, Quality, Channel indicator, Output audio type, Loopthrough, CI1 and CI2. 6.2.1 Aspect ratio (Picture format) The picture format can be set to 4:3 or 16:9 (Widescreen). If the main TV is 4:3 choose 4:3 to watch 4:3 programs in full screen and widescreen programmes (16:9) in the letterbox format where the full width of the picture is shown and the top and bottom of the picture are black. Choose 16:9 if the main TV is widescreen to watch 16:9 programmes in full screen. 6.2.2 Output channels Use thi

  • a2b MyM-3T mictro master, 16 6.1.3 Channel search The first time the MyM-3T is installed you must do a channel search to tune in available digital channels. Before you start the search you must select the frequency raster that is used in your area. Connect the TV aerial before starting the channel search. To follow the channel search process tune a TV to channel S11 (231,25 MHz). During the channel search all the signals that come from the aerial are shown at the bottom of the screen by individual channels (frequencies) and signal strength. 6 Menu settings with buttons 6.1.4 National This menu is used to change the country settings. You can choose your preferences for Subtitling, Audio langua

  • a2b MyM-3T mictro master, 22 6 Menu settings with buttons cont. English 6.2.8 Audio setting In this menu the audio level can be adjusted between +6dB and -6dB for the three different RF outputs, Channel 1, Channel 2 and Channel 3. NOTE! You have to scroll up or down with the arrow buttons to be able to see and choose all possible settings.

  • a2b MyM-3T mictro master, 33 Thank you for purchasing an A2B Electronics product. The MyM-3T is a revolutionary solution for reception and modulation of satellite transmitted TV-content into an analogue format suited for small SMATV networks where cost efficiency and high quality is required. The MyM-3T receives DVB-T transmissions. The MyM-3T unit is delivered with hardware and software that supports DVB-T reception, MPEG2/MPEG4 decoding, DSB RF modulation with NICAM or A2 audio, IP control and management. The MyM-3T can be upg

  • a2b MyM-3T mictro master, 22 1. Introduction 2. Unpacking the unit 3. Connections and indications 4. IP settings 5. Menus and settings web ui 5.1 Overview menu 5.2 Input settings 5.3 Output settings 5.4 Service management 5.5 CI menu 5.6 System options 6. Menus and settings with buttons 7. Installation and Configuration examples 8. Technical specification MyM-3T 9. Declaration of conformity 10.Abbreviations English CONTENT

  • a2b MyM-3T mictro master, 11 English Advanced Aspect ratio Set correct picture format of the programs transmitted from the MyM-3T. Video standard Select your regional video standard. Audio system Set your regional audio standard. Channel Indication Select to transmit the Channel Indicator names as set up under [Output/Modulation] Loopthrough Select here if loopthrough for input (antenna) signal shall be “On” or “Off”. 5 Menus and settings (continued) 5.3 Output settings continued Auto conversion Converts subtitling to fit actual picture aspect

  • a2b MyM-3T mictro master, 26 English DVB Digital Video Broadcasting (Standardization body) MPEG-2 Compression format for digital TV MPEG-4 Compression format for digital TV (SD and HD) DSB Double Side Band (RF modulation occupying 2 channels) NICAM Digital sound format for analogue TV transmission IP Internet Protocol (defines how data is packetized for Internet broadcast) DVB-S Modulation format (QPSK) for satellite transmission of digital TV DVB-S2 Modulation format (QPSK or 8PSK) for satellite transmission of digital TV DHCP Dynamic Host Configuration Protocol is a protocol used by networked devices (clients) to obt

  • 15 English The MyM-3T has a button menu system for changing settings and functionality. The menus are shown on the TV screen after buttons has been activated in the web ui (see Chapter 5.1 how to activate button menu). Press the OK button on the MyM-3T (see Chapter 6 Connectors and buttons) to display the menus. The picture to the right shows the main menu. Use the arro

  • a2b MyM-3T mictro master, 2323 The MyM-3T can be installed either as a stand alone unit directly on the wall or by the use of a dedicated MyM-3T Security Wall Mount (part number 702800.10). The MyM-3T Security Wall Mount secures both the MyM-3T and CAM-modules with a locking function to avoid loss of CAM’s and smart cards in public places. Before connecting power to the MyM-3T, make sure that all other connections have been made. A coaxial cable of good quality with an F-connector should be connected to the Antenna input and another

  • a2b MyM-3T mictro master, 8 English 5.1 Overview menu [Current settings] Contains information of current input and output signals, if the tuners are locked to a signal, firmware version, bootloader version, hardware revision, serial number and current IP Network settings. By a click on [Edit] radio button you get a choice that you have to make if you shall use the unit with ”Full web ui” or ”Buttons + limited web ui”. Here you can also give the unit a [Name] and a [Description]. After choosing, click on [Save] and restart the unit to store this setting. All necessary settings can be made in

  • a2b MyM-3T mictro master, 12 English 5.4 Service Management The MyM-3T contains 2 separate DVB-T tuners and totally 3 services can be selected for each of output channels, named [CH-1], [CH-2] and [CH-3]. The list of services presents all received services from both tuner inputs. When one program (service) is selected, the box in front of the program name changes colour to green. The service list gives following information: Selected service Green colour indication Service name Program name Provider Name of operator Input Indicates what antenna input the service is received from. SID Service ID number (as received) 5 Menus and settings (continued) 5.5 CI menu Th

  • a2b MyM-3T mictro master, 6 The MyM-3T has an embedded web server allowing standard web browsers (Internet Explorer, Firefox, Opera etc.) to connect to the unit for settings and management. No controller software is needed. The MyM-3T has by default a static IP address for connecting your PC to the unit. The MyM-3T is delivered with the default IP address: 192.168.0.20. First time installation requires that you set a static IP address on your computer. For example set your PC to IP address: 192.168.0.19 and Net mask: 255.255.255.0 NOTE! MyM-3T can either be controlled by the three buttons on the

Related Products and Documents (TV Receiver):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Bertazzoni Modular Series P34500X User instructions bertazzoni/modular-series-p34500x-D4J.pdf 01 Aug 2023 4 0.77 Mb
2 Sharp XG-P20XU Operation manual sharp/xg-p20xu-7YB.pdf 03 Apr 2023 83 6.07 Mb
3 Garmin 198C Owner's manual garmin/198c-336.pdf 08 Jun 2023 126 2.7 Mb
4 Xerox DocuColor 1632 Quick connect manual xerox/docucolor-1632-1Y6.pdf 22 Jul 2022 2 0.08 Mb
5 Abbott Relion ultima Operation & user’s manual abbott/relion-ultima-2HY.pdf 03 Jan 2023 53 10.92 Mb
6 FujiFilm FinePix S1500 Owner's manual fujifilm/finepix-s1500-Y99.pdf 10 Jul 2023 132 8.93 Mb

Similar Resources:

  • Samsung

    HC-P4252W

    (71 pages)
    PROJECTION TELEVISION1-800-SAMSUNG (1-800-726-7864)Samsung Electronics AmericaService Division400 Valley Road, Suite 201Mount Arlington, NJ 07856www.samsungusa.comSamsung Electronics Canada Inc.Samsung Customer Care7037 Financial DriveMississauga, OntarioL5N 6R3www.samsung.caBP68-00289A-02Owner’s Instructions................................................ …
  • Comcast

    X1

    (4 pages)
    USING COMCAST XFINITYTEL: 312.829.9145 FAX: 312.829.9146 WWW.TVTI.COM1640 W. HUBBARD; SUITE 200; CHICAGO, IL 60622& 2215 LAKESIDE; BANNOCKBURN, IL 60015©WELCOME USER____________________ …
  • RCA

    14M041

    (16 pages)
    TelevisionUser’s GuideModels: 14M041 / 20M041Please read these instructions before oper-ating this product for the fi rst time.TOCOM 1639478BChanging En ter tain ment. Again. …
  • Diamond Multimedia

    XtremeTV PVR550PCI

    (1 pages)
    SPECIFICATION SHEETSKU : PVR550PCIAugust 10, 2011 - 2:16 pmENG APVD - LK 2007-09-28MRKTG APVD - LL 2007-09-28SKU PVR550PCISYSTEM BUILDER SKUPRODUCT DIAMOND XtremeTV PVR 550PRODUCT DETAILED DESCRIPTION XtremeTV PVR 550 - Turn your PC into an XtremeTV! Whether you want to watch TV on your LCD, flat-panel or computermonitor or turn your PC into a full-featur …
  • Cypress Semiconductor

    Set-top Box Clock Generator with VCXO CY24713

    (5 pages)
    CY24713Set-top Box Clock Generator with VCXOCypress Semiconductor Corporation • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600Document #: 38-07396 Rev. *A Revised May 22, 2008Features■ Integrated phase-locked loop (PLL)■ Low-jitter, high-accuracy outputs■ VCXO with analog adjust■ 3.3V Operation■ 8-pin SOICBenefits■ High-perfo …
  • Soundmatters

    SLIMstage 30

    (56 pages)
    Deutsch РусскFrançais ItalianoEnglish Españolsoundmatters international, inc.reno, nevada, USAworldwide tel 775.981.1460toll-free (usa) 800.698.SOMA (7662)fax 775.981.1465email [email protected] www.soundmatters.comin europe contact:Dahl Audio Electronic GmbH10707 Berlin, Germanytel 0049 (0) 30 – 88628017email [email protected]©20 …

Comments, Questions and Opinions: