iCarsoft Honda/Acura Multi-system Scanner i990 Operation & User’s Manual

Text of iCarsoft Honda/Acura Multi-system Scanner i990 User Guide:

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 12 Select one system and press [ ], the scanner will communicate with the system . ◆ if the scanner communication fail with the vehicle’s ECU, a “ERROR” message shows up on the display ◆ if the scanner communicates successfully with the vehicle, it will display system ID, as shown below: Press [ ] and enter the function menu , as shown below:

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 15 Menu]. the screen will display the interface as shown below: Press [ ] or [ ] to return the [Diagnostic menu] Notes: * Before performing this function. Make sure to retrieve and record the trouble codes. * After clearing, you should retrieve trouble codes once more or turn ignition on and retrieve codes again. If there are still some trouble codes for hard troubles, please find the reason caused the trouble code first, and then solve the problem. Now, the trouble codes can be erased. 4.

• iCarsoft Honda/Acura Multi-system Scanner i990 20 a) Use the USB cable to connect i910 scanner with PC b) Run the update software. When the scanner connect with PC , the software will show [USB CONNECTED], As below:

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 24 If update success, the software will display [Update success!]; if update not success, it will display [Update fail! Try again]. Press [finish] , the scanner is already updated ,and you can unplug the scanner from PC.

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 5 320 x 240 pixel display with contrast adjustment ③ KEY BROAD – include [ ][ ][ ][ ][ ] [ ] [HELP] ④ USB PORT -- Use to connect the scan tool to PC; 2.2 Specifications A) Display: Color, 320 x 240 pixel display with contrast adjustment B) Operation Temperature: -20 ℃ -- 75 ℃ C) Storage Temperature: -40 ℃ -- 120 ℃ D) Power: 8V -- 24V E) Dimensions: Length Width Height 135mm 85mm 26mm F) Weight Net Weight: 250 g Gross Weight: 450 g 2.3 Ac

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 11 4. Diagnostics Select [DIAGNOSE] in Main Menu and press [ ]. The scanner will communicate with the vehicle , if the scanner can not communicate with the vehicle , it will display the error message, as shown below: If the scanner can communicate with the vehicle , it will display the system menu, as shown below:

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 1 INDEX 1．Safety Precautions and Warnings ................... 2 2. Using the Scan Tool .............................. 4 2.1 Tool Description ............................... 4 2.2 Specifications ................................. 5 2.3 Accessories Include ............................ 5 2.4 Product Troubleshooting ........................ 6 3. Software Function ................................ 8 3.1 System Configuration ........................... 9 4. Diagnostics ..................................... 11 4.1 Read Trouble Code .............

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 14 Press [ ] or [ ] to return the [Diagnostic menu] View DTCs and their definitions on screen. � If there are no Diagnostic Trouble Codes present, the display indicates “No Trouble Code” Wait a few seconds or press any OK to return to Diagnostic Menu. � The control module number, sequence of the DTCs, total number of codes detected and type of codes (Generic or Manufacturer specific) will be observed on the upper right hand corner of the display. 4.2 Erasing Codes CAUTION: Erasing the Diagnos

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 22 1) Click [Update] button. 2) Click [ ] to find the update file 3) Select update file and click [open] button. 4) Into the upgrade interface, wait for the end of upgrade WARNNING: Do not power off during upgrade! Do not Plug or Unplug USB tools during upgrade!

• iCarsoft Honda/Acura Multi-system Scanner i990 19 After finish setup , there is an icon of scanner in desktop. 2. Run the update tool and Operate in accordance with photographs

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 13 Press [ ][ ] to select, [ ] and [ ] to Page, and press [ ] to confirm. 4.1 Read Trouble Code ◆Reading Codes can be done with the key on engine off (KOEO) or with the key on engine running (KOER). ◆Trouble codes cause the control module to illuminate the malfunction indicator lamp (MIL) when emission-related fault occurs. select [Read Trouble Code] and press [ ] in [Diagnostic Menu] . If the

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 3 gasoline/chemical/electrical fires nearby. · Don’t connect or disconnect any test equipment while the ignition is on or the engine is running. · Keep the scan tool dry, clean, free from oil/water or grease. Use a mild detergent on a clean cloth to clean the outside of the scan tool, when necessary.

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 18 5．Software update 1. Setup Update tools Put the CD in to PC and open. You can see the setup file in the CD. Double click the [Setup file] to setup the tool. Operate following the instructions, and finish to setup.

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 8 3. Software Function CATION: Don’t connect or disconnect any test equipment with ignition on or engine running. 1) Turn the ignition off. 2) Locate the vehicle’s 16-pin Data Link Connector (DLC) 3) Plug into the scan tool cable connector to the vehicle's DLC ，the scan tool will be light. As shown 4) Turn the ignition on. Engine can be off or running 5) Press any key to enter Main Menu.

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 2 1．Safety Precautions and Warnings To prevent personal injury or damage to vehicles and/or the scan tool. Read this instruction manual first and observe the following safety precautions at a minimum whenever working on a vehicle. ·Always perform automotive testing in a safe environment. ·Wear safety eye protection that meets ANSI standards. · Keep clothing, hair, hands, tools, test equipment, etc. Away from all moving or hot engine parts. ·Operate the vehicle in a well ventilated work area: Exhaus

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 4 2. Using the Scan Tool 2.1 Tool Description ① DLC -- Data Link Connector (DLC), Use to connect the scan tool to the vehicle; ② LCD DISPLAY -- Indicates test results. Color,

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 16 Press [ ][ ] to select [Read DataStream] in [ Diagnostic Menu] and press [ ] to confirm. The screen will display the interface as shown below. Data model If appear [GRAPH] , Press [ ] to enter Graph mode. Press [ ] to return [Diagnostic Menu] the screen will display the interface as below:

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 9 USE the key [ ][ ] to select in the [Main Menu] , and press [ ] to select 3.1 System Configuration Select [SYSTEM CONFIGUARATION] in the Main Menu and press [ ]. The screen will display the interface as shown below: The scanner allows you to make the following adjustment settings;

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 7 If the scan tool won’t power up or operates incorrectly in any other way, you need to do the following to check up: A) Check if the scan tool’s OBD II connector is securely connected to the vehicle’s DLC; B) Check if the DLC pins are bent or broken. Clean the DLC pins if necessary. C) Check vehicle battery to make sure it is still good with at least 8.0 volts.

• iCarsoft Honda/Acura Multi-system Scanner i990, iCarsoft Honda/Acura Multi-system Scanner i990 10 1) [SYSTEM INFORMATION]: show the system information Choose [SYSTEM INFORMATION] and press [ ] . The screen will display the interface as shown below: Press [ ] or [ ] to return the [Main menu] 2) [BEEPER] : ON / OFF the beep. Choose [BEEPER] and press [ ] , the screen will display the interface as shown below: Press [ ][ ] to select, and press [ ] to confirm.

• iCarsoft Honda/Acura Multi-system Scanner i990 23 Start Update Waiting for a few minutes. The software will update the scanner tool. Finish Update When the update is finished, the screen on PC will show as below.

Related Products and Documents (Scanner):

Comparable Devices:

Similar Resources:

• Epson Stylus Scan 2500 (9 pages) 806103101116106102813SEE PAGE 2EPSON STYLUS SCAN 2500 No.1 Rev.01 10138119400123400 for EAI400 for ETT401123For EUR,S.E.ASIA, OCEANIA,RUSSIA187108185107 X13331129100500104182109181787105789129129450186 for EAI128128 …

• POSX xi3000 (25 pages) Xi3000 Bluetooth Scanner User’s Manual WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radia …

• Radio Shack PRO-79 (52 pages) Owner’s ManualCat. No. 20-314PRO-79200-Channel VHF/Air/UHFHandheld ScannerPlease read before using this equipment.(illus - show front of product)20-314.fm Page 1 Monday, December 13, 1999 12:55 PM …

• Fujitsu ScanSnap iX500 (10 pages) 1P3PC-4182-05ENThank you for purchasing FUJITSU color image scanner ScanSnap iX500 or S1300i(hereinafter referred to as "the ScanSnap").This document contains the general information for safety that must be read before using thisproduct (which includes the ScanSnap, and all associated software and documents). Readthis document, Getting Started, and …

• Canon N1240U - CanoScan Flatbed Scanner (14 pages) Canon Color Image ScannerCanoScan N670U/N676U/N1240UI-IE-049B © CANON INC. 2001 PRINTED IN CHINAQuick Start GuideQuick Start GuideCANON INC.30-2, Shimomaruko 3-chome, Ohta-kuTokyo 146-8501, JapanCANON U.S.A., INC. Digital Home and Personal Systems Division2995 Redhill AvenueCosta Mesa, CA 926261-800-OK-CANONhttp://www.ccsi.canon.comCANON CANADA INC.6390 Di …

• Epson 1680 - Expression Special Edition (124 pages) Color Image ScannerColor Image ScannerSetup GuideSetup GuidePrinted in Japan00.XX-XX4013550-00XXXSetup Guide4013550 Rev.0cover-F BK4013550 Rev.0cover-F DIC F43 …

Comments, Questions and Opinions: