Manualios.com

Icom IC-F9011 Operation & User’s Manual

Icom IC-F9011 Manual Online:

3.7, 1273 votes
Icom IC-F9011 User Manual
Icom IC-F9011 User Guide
Icom IC-F9011 Online Manual

Text of Icom IC-F9011 User Guide:

  • Icom IC-F9011, 2Push and hold [PTT] and speak into the APCO P25 Mode Operation 2Select the desired Talkgroup ID (or name) using [CH Up]/[CH Down], or [CH Up/Down]. microphone. ▒ NOTE: Only one station is permitted to speak at a ▒ time. 3Release [PTT] to receive a response. ▒ NOTE: When the Talkgroup ID is set to ‘65535,’ ▒ any Talkgroup call can be received (if NAC is ▒ matched). ▒ NOTE: When ‘65535’ is selected as the ▒ Talkgroup ID, All Call is an open call to ▒ everyone on your system. 3Push and hold [PTT] to transmit the Talkgroup call to the specific group, then speak into the mic

  • Icom IC-F9011, 2-2 Common Features APCO P25 Digital migration is now an inevitable trend for Federal, State and Local government users of 2-way radios. The IC-F9011 series, much more evolved from the IC-F70D series, is not simply enabling migration from analog to digital but also covers a wide range of features. The standard trunking capability of the IC-F9011 series is outstanding, ensuring smooth communication, despite busy signal traffic. Furthermore the IC-F9011 series has the advanced DVSI AMBE+2 TM enhanced vocoder, resulting in clear speech aud

  • Icom IC-F9011, 4-6-2 Encryption Setup  Activating Encryption P25 radios have the ability to use DES or AES encryption. To enable encryption, you will need a CKR (Common Key Reference). The KVL 3000 Plus keyloader from Motorola creates this key. ¾ Obtaining a CKR from the KVL 3000 Plus Keyloader 9. Press Enter. This CKR (TEK) is now stored in the KVL and can be loaded into the radio using the loading instructions detailed below. 10. Press Escape on KVL. ¾ Loading a Pre-loaded Key into your Radio 1. Connect you

  • Icom IC-F9011, ■ Individual call Receiving APCO P25 Mode Operation Transmitting Individual call allows you to make a call to a specific station, and it provides private communication. [Individual] key assignment is necessary to transmit the Individual call. ▒ Not available on Non-display model. 1When an Individual call is received; • The Busy/Transmit indicator lights green. • The ringer sounds. (Depending on the pre- setting.) • The calling station ID (or name) is displayed for 2 sec. (Depending on the pre-set val

  • APCO P25 Mode Operation Receiving (Reviving the transceiver) A Radio uninhibit signal revives the inhibited transceiver. 1When an inhibited transceiver receives a radio uninhibit signal, the Busy/Transmit indicator does not light because the Radio Inhibit is still activated. 2 An acknowledgement is automatically transmitted 3Push [Digital Button] a

  • ENCRYPTION KEY “DENC” (The optional UT 125 AES/DES encryption unit is Preparation for Operation (The optional UT - 125 AES/DES encryption unit is required.)  For Simple and 10-key models Push to turn the Encryption function ON or OFF.  For Non-display model ➥ Push and hold for 1 sec to turn the Encryption function ON. ➥ If the function is ON, push the k

  • Icom IC-F9011, 4-5 Display Text ■Display Text Enter up to a 24-character text for easy recognition of the scan group. The programmed texts are indicated in the scan selection mode. ■Text-Portable Right click to display the [Edit... Enter] menu and ➣ You can use and make an original character that is edited in the Character Editor Screen . Right click to display the [Edit... Enter] menu and click [Edit... Enter]. Edit the original character ➣ Double click the desired character in the table or push [Space] to pick up the character. ➣ Push [Enter] to finish editing. Usable char

  • Icom IC-F9011,  What is OTAR ? 4-7 OTAR Without OTAR, the operator has to collect all radios and reprogram them to change the keys. Or a technician must go around and visit all the radio sites with a PC and a programmer just to change keys – it is time-consuming.  What is OTAR ? OTAR or Over-The-Air-Rekeying is the common name for the method of changing the encryption keys over a radio channel or “over the air”. It is also referred to as Over-the-Air Transfer (OTAT). Regular key changing is one of the basic In addition, without OTAR, it is very difficult or even impossible to re-program the scramblers with a wired programmer due to their big number and

  • Icom IC-F9011, 2-3 IP Classification Codes Ingress Protection (IP) ratings are developed by the European Committee for Electro Technical Standardization. International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment. The classification system defines the level of protection provided by enclosures to prevent the ingress of foreign objects and moisture into the electrical equipment. The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal. An IP number contains two numbers (i.e. IP57) in most instances which relate to the

  • 4-2-2 Cloning Items IC - F9011 series Connect the cloning cable, OPC-1862 to the multi- connector first and then rotate [VOL] clockwise to turn power ON. Click or select <Read <- TR> in the [Clone] menu to read out all radio's programmed cloning data into PC before editin g with this clonin g RELATED ITEMS Confirming the COM port Changing the COM

  • Icom IC-F9011, 3-3-2 Battery Charging ■ Optional battery chargers  AD-110 installation The AD-110 charger adapter must be installed into the BC-119N or BC-121N before battery charging. ➥ Connect the AD-110 charger adapter and the BC- 119N/BC-121N as below, then install the AD - 110 into the holder space of the BC - 119N or Rapid charging with the BC-121N+AD-110 The optional BC-121N allows up to 6 battery packs to be charged simultaneously. Charging period: Approx. 4 hours (with BP-254) The following items are additionally required. • Six AD-110 charger adapters (purchas

  • 4-3 APCO P25 Access Code Types The IC - F9510 series provides capability to set up your own talk groups and quiet stand - by when others are CTCSS or DTCS like operation ■Memory CH > Zone The IC F9510 series provides capability to set up your own talk groups and quiet stand by when others are talking. You can also set up selective calls to individuals in P25 digital oper

  • Icom IC-F9011, APCO P25 Mode Operation 5Push [PTT] to make a Phone call to the target telephone station. • The Busy/Transmit indicator lights red. • Beeps sound after the Phone call is connected to the target telephone station. • If your Phone call is not connected, push [Digital Button] (or [Phone]) to return to normal operation. ▒ Not available on Non-display model. 1Push [Digital Button] to enter the digital call type selection mode. 2Push [CH Up] or [CH Down], or rotate [CH Up/Down] to select “ANNOUNCEMENT.” 6Push and hold [PTT] and speak into the microphone. 7Release [PTT] to receive. 8After the conversation is finished, pus

  • Icom IC-F9011, ⑥DEALER-PROGRAMMABLE TOGGLE SWITCH Did f ti b g d b ■Front panel 4 Operation and Function 4-1-1 Operation and Function D es i re d f unc ti on can b e pro g ramme d b y your dealer. When the toggle switch is set to the left side (‘ ’), the preprogrammed function will be activated. ⑦VOLUME CONTROL [VOL] Rotate to turn the power ON/OFF and adjusts the audio level. Speaker Mi h ⑧ROTARY SELECTOR yRotate to select the pre-programmed memory channels or the operating zone. (Depending on the pre-set value) yThe channel/z

  • Icom IC-F9011, Cloning Items ¾DTMF Settings Set the time period/signal length for the DTMF Timer, First Timer, * # Timer. Continuous Tone External I/O ¾CH Switch Table Available for mobile radios only. ¾Continuous Tone Select the desired CTCSS frequency from the list or enter a 3-digit DTCS code with polarity, N (Normal) or I (Inverse). ¾Port Setting The desired function can be assigned to some of the D-sub 25 pins on the screen. The assignable pins are: Ext. I/O [10]/[12]/[15]/[17]/[18]/[19]/[21]/[23]/ [24] and [25]. ¾Continuous Tone Setting Set the Continuous Tone Setting items for Tone Burst, CTCSS Reverse Burst Timer, etc. Scan Common ¾Scan List Set the s

  • Icom IC-F9011, 3-3-4 Speaker Microphone ■ Optional Speaker Microphone (HM-184)  To attach Attach the connector of the speaker-microphone into the multi-connector on the transceiver and tighten the screw. PTT SWITCH Push and hold to Transmit; Microphone Speaker Belt cli p CAUTION: Attach the speaker- microphone’s connector securely to prevent accidental di i i i Coin Screw Turn the transceiver power OFF before connecting the HM-184. Release to receive p NEVER immerse the connector in water. If the connector becomes wet, be sure to dry it BEFORE attaching it to the transceiver. ▒ NOTE: The microphon

  • Icom IC-F9011, 3-3-3 Battery Pack and Case ■ Supplied battery pack (BP-254) This is one of the supplied accessories. Attach it to the radio according to the instructions in 3-1 Supplied Accessories Attachments. Fig.1 BP-237 Latch Battery pack Fig.3 Fig.2 Battery pack Battery release button ■ Optional battery case (BP - 237) The optional battery case uses 6 × AA (LR6) size alkaline batteries. Using alkaline batteries results in lower output power. 1Hook your finger under the latch, and open the cover in the direction of the arrow (). (Fig.1) 2 Then, install 6 × AA (LR6) size alkaline batteries. Battery pack Voltage Capacity Battery life * 3 2 Then, install 6 AA (L

  • Icom IC-F9011, ■ General 4-1-7 APCO P25 Mode Operation ■ General APCO Project-25 (P25) is designed for public safety digital radio, and allows you to make a call to a specific station (Individual call) or to a particular group (Talkgroup call or Announcement call*) in the Conventional and Trunking mode. Other P25 transceivers on the channel will not listen in on a call that does not match their Individual/Talkgroup/ announcement group ID or NAC (Network Access Code). Moreover, the following functions and calls are available:  Pager function  Radio Inhibit  Uninhibit function Unin

  • Icom IC-F9011, ■ Connections Basic Setup of Cloning Software All cloning operations are performed from the computer’s keyboard— the operation required on the transceiver side is; 1 First, connect the cloning cable as illustrated below. 2 Then, rotate [VOL] to turn power ON. Attaching: Attach the t connec t or cover (n), then tighten the screw (o). Detaching: Unscrew ( p ),  Screen description ➊➋➌➍➎➏ ➐ ( ), then detach the connector cover (q). 1. FILE MENU [File] Used for saving memory channel contents, printing the pre-programmed information

  • Icom IC-F9011, APCO P25 Trunking and Conventional Basic functions Trunking System Conventional System Functions 21 Priority Group Monitor  Monitoring the arrival of groupcall signals with high priority level. 22 Emergency Alarm  Emergency alarm. 23 Call Alert  Call alert. 24 Short Message  Short message function 25 Status Update Request  Status message function 26 Status Query  Status message function 27 Status Query Response  Status message function 28 Radio Unit Monitor  External monitor function. 29 Radio Check  Checking radio validity 30 Receive Radio Inhibit & Uninhibit  Inhibit/un-inh

  • Icom IC-F9011, ■ Turning power ON ZONE TYPE: 4-1-5 Basic Operation ■ Turning power ON ▒ Prior to using the transceiver for the first time, ▒ the battery pack must be fully charged for ▒ optimum life and operation. ▒ When you use the transceiver for the first time, ▒ or after the transceiver has sat unused for a long ▒ time, make sure to check the data and time ▒ indication after turning the power ON If the T o select the desired zone : •Push [Zone], then push [CH Up] or

  • Icom IC-F9011,  Al d i EMERGENCY KEY “ EMR ” Preparation for Operation  A na l og mo d e operat i on (Common operation) RE-DIAL KEY “DTMR” Push to transmit the last-transmitted DTMF code. (Display and non-display units operate differently) DTMF AUTODIAL KEY “DTMA”  For Simple and 10 - key models EMERGENCY KEY “ EMR ” Push and hold for the specified time period*, to enter the emergency mode. After the specified time period* has passed, an Emergency call or alarm is transmitted once, or repeatedly. • To exit the emergency mode, push and hold for the specified time period* again before transmitting. • T his function depends on the pr

  • Icom IC-F9011, If the control channel is found, the transceiver * The valid roaming areas (up to 10) are listed on the APCO P25 Mode Operation attempts registration and group affiliation. Blinks when registration and group affiliation are performed. (Simple and 10-key models only) roaming list. ■ Site Lock function (P25 Trunking mode only) The transceiver can be locked into the current site with [Site Lock]. When the Site Lock function is activated, roaming ✔ FAILED: The transceiver will continue to hunt for the next site. ✔ SUCCEEDED: The transceiver can be operated in the P25 Trunking system. and the background scan are inhibited. This function is helpful whe

  • Icom IC-F9011, Functions Programmable to Keys SCAN A KEY “SCNA”  For Simple/10-key models ➥Push to start and cancel scanning operation. When Power ON Scan function is activated, push to pause the scanning operation. The paused scan resumes after the specified time period has passed. ➥Push and hold this ke y for 1 sec to indicate the PRIO A REWRITE AND PRIO B REWRITE KEYS “PRAR””PRBR”  For Simple/10-key models ➥Push to select Priority A or Priority B channel. ➥Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 sec to rewrite the operating channel as the Priority A or Priority B channel. y scan list, then push [CH Up] or [CH Down] to select the desir

  • Battery/Battery Charging - Caution • WARNING! NEVER charge or leave the battery in the battery charger beyond the specified time for charging. If the battery is not completely charged by the specified time, stop charging and remove the battery from the battery charger. Continuing to charge the battery beyond the specified time limit may cause a fire, overheating, or the battery may

More Instructions:

DOWNLOAD

Related Products and Documents (Portable Radio):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Western Digital WDBWVL0080KBK Maintenance manual western-digital/wdbwvl0080kbk-T95.pdf 30 Dec 2023 107 3.62 Mb
2 DigitalWay MPIO DC100 Operation & user’s manual digitalway/mpio-dc100-X2H.pdf 18 Dec 2023 8
3 JVC KD-G507 Instructions manual jvc/kd-g507-ZGJ.pdf 12 Jan 2023 74
4 Smeg ADP1101 Bedienungsanleitung smeg/adp1101-WL5.pdf 19 Mar 2024 11 2.22 Mb
5 Brother 083-8775 Instruction manual brother/083-8775-B8V.pdf 14 Feb 2024 135
6 Roberts R9962 Owner's manual roberts/r9962-N3L.pdf 03 Sep 2023 12 0.33 Mb

Similar Resources:

  • Hytera

    PD78X

    (42 pages)
    Preface Thank you for purchasing Hytera DMR Digital Portable Radio. As a product built to the DMR standard, it is endowed with ergonomic design, all-round digital functions and remarkable quality to refresh your experience and enable you to be responsive to emergent situations. To derive optimum performance from your product, please read this manual and th …
  • Audiovox

    FR14

    (6 pages)
    14 CHANNEL FAMILY RADIO SYSTEMMODEL # FR14 and FR142BEFORE OPERATING THIS PRODUCTPLEASE READ THESE INSTRUCTIONSCOMPLETELY© 2001 Audiovox Electronics Corp., Hauppauge, NY 11788Printed in China128-6020A052FR142104 …
  • XM Satellite Radio

    Portable Satellite Radio

    (24 pages)
    Delphi Corporation1441 West Long Lake RoadTroy, Michigan 48098-5090U.S.A.Customer Service: [1] 877.GO DELPHIwww.delphi.comPrinted on Recycled Paper©2002 Delphi Corporation. All rights reserved.DAO-02-E-067The SKYFi name, XM name, and related logos aretrademarks of XM Satellite Radio Inc. …
  • Sony

    ICF-C723 - Ic Memory Clock Radio

    (17 pages)
    Ver 1.1MICROFILMICF-C723/C723LSERVICE MANUALICF-C723FM/AM PLL SYNTHESIZED CLOCK RADIOICF-C723LFM/MW/LW PLL SYNTHESIZED CLOCK RADIOSPECIFICATIONSUS ModelCanadian ModelE ModelAustralian ModelICF-C723UK ModelICF-C723LAEP ModelICF-C723/C723LRadio sectionFrequency range :US, Canadian modelBand ICF-C723 Channel stepFM 87.5– 108 MHz 0.1MHzAM 530 – 1,710 kHz 10k …
  • Hyundai

    PPR 310 BO

    (12 pages)
    NÁVOD K POUŽITÍ / NÁVOD NA POUŽITIEINSTRUKCJA OBSŁUGI / INSTRUCTION MANUALHASZNÁLATÍ ÚTMUTATÓKAPESNÍ RÁDIO/ VRECKOVÉ RÁDIO / RADIO KIESZONKOWE / POCKET RADIO / ZSEBRÁDIÓPPR 310 BOPPR 310 BSPPR 310 BG …
  • Tecsun

    PL-880

    (6 pages)
    TECSUNPL-880PLL MULTIBAND RADIOWITHEXCELLENT PERFORMANCEADDITIONAL FEATURES LCD/VRSN RUN TIME [ ] [ ] [ ] [ AMBW ] [ VF/VM] FM SET LW ON/OFF 9/10kHz [ 1 ] [ 2 ] [ 3 ] [AM] [FM] BAT LOW LIGHT FEAT ON/OFF FM US/EUR DNR [ 4 ] [ 5 ] [ 6 ] [∧] …

Comments, Questions and Opinions: