Manualios.com

Bartec BCS 3800 Operation & User’s Manual

Bartec BCS 3800 Manual Online:

3.8, 2063 votes
Bartec BCS 3800 User Manual
Bartec BCS 3800 User Guide
Bartec BCS 3800 Online Manual

Text of Bartec BCS 3800 User Guide:

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 9 von 21 4 Connection Assignment In terms of construction the junction box for the type 17-21BB-17xx power pack is identical in all three variants. It consists of an Ex e section (increased safety) and an Ex i section (intrinsic safety). The voltage supply and the data line in the Ex i section of the handheld scanner are connected in the Ex e section. Attention Always disconnect the terminal connection chamb

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 14 von 21 Handheld scanner with 2.1 m shielded 4-pin connection cable Core colour Connect or socket pin Terminal no. in the power pack (terminals are blue) Designation Shield 4 Apply equipotential bonding to terminal Shield Green 3 3 TxD Blue/ red 1 1 +UB Black 2 2 GND 4.4 Connection to Supply Module Type 05-0080-0378 The type 05-0080-0378 supply module

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 6 von 21 The following information is provided in compliance with EN 60825, clause 5: DEUTSCH KLASSE 1 KLASSE 1 LASER PRODUKT KLASSE 2 LASERLICHT NICHT IN DEN LASERSTRAHL SEHEN KLASSE 2 LASER PRODUKT ENGLISH CLASS 1 CLASS 1 LASER PRODUCT CLASS 2 LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT DANISH / DANSK KLASSE 1 KLASSE 1 LASERPRODUKT KLASSE 2 LASERLYF SE IKKE IND I STRÅLEN KLASSE 2 LASERPRODUKT ITAL

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 18 von 21 6 Commissioning 6.1 Handheld Scanner To ensure that the devices will function perfectly with a long service life, they must be handled carefully. Chapter 5 “Installation” describes how to avoid inappropriate handling (e.g. device falling down, being damaged by objects). Danger! The devices may be used only if they are in a technically perfe

  • Bartec BCS 3800, Safety Technical data subject to change without notice. Issue 01/2010 Safety instructions and warnings are specially highlighted in this manual and marked by symbols. The safety instructions and warnings are assigned to the individual work steps. Careful handling and consistent observation of the instructions will prevent accidents, personal injuries and damage to property. The adherence to all directions and safety instructions in this manual is a precondition

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 10 von 21 (13) Connect the voltage supply cable to the all-pole mains disconnecting switch and/or fuse. (14) Switch on the voltage supply. (15) Check if the laser beam comes from the handheld scanner when the trigger is actuated. (16) Program the handheld scanner to the interface parameters by means of the bar codes in the programming manual. Note The maximum length of the connectio

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 11 von 21 Permissible stripping length and core cross-section for terminals X1 to X13 Stripping length Cross section min. to max. Conductor cross-section rigid 9 mm 0.2 mm² to 2.5 mm² Conductor cross-section flexible 9 mm 0.2 mm² to 2.5 mm² Conductor cross-section flexible with wire end ferrule without plastic cover 9 mm 0.25 mm² to 1.5 mm² Conductor cross-section flexible with wir

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 4 von 21 Current consumption max. in standby mode approx. 60 mA Current consumption max. in scanning mode approx. 210 mA Laser diode visible red light 630 Nm Opt. radiation power < 35 mW Laser safety Laser class 2 Scan rate 270 scans/second Angular scanning angle ± 65° Tilted scanning angle ± 65° Scanning contrast 20 % minimum Decoding range Minimum bar code width Maximum near- field areas Minimum far-field areas (25 lux illumination) Minimum far-field areas (300 lux illumination) 13.0 mil 1

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 15 von 21 5 Installation For electrical systems the relevant installation and operating specifications (e.g. Directives 99/92/EC and 94/9/EC, BetrSichV and the applicable national ordinances, IEC 60 079-14 and the DIN VDE 0100 series) must be observed. The operator of an electrical system in a hazardous environment must keep the operating equipment in an orderly condition, operate it correctly, monitor it and do the required maintenance and repairs. Before commissioning the devices, check

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 1 von 21 1 System Description 1.1 Definition The bar code scanning systems from BARTEC are complete systems consisting of the BCS 3800 ex handheld scanner and the power pack that goes with it. The handheld scanner was developed specially for use in hazardous (potentially explosive) areas and it is ATEX-certified: BCS 3800 ex Handheld Scanner Type 17-21BA-0024 for Zone 1 in the intrinsic safety type of protection and Zone 21. The type 17-21BA-0024 bar code scann

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 7 von 21 3 Mounting 3.1 Notes of Handling The device is factory-sealed. Do not open it! The device may be opened in the factory only! Protect the device from impact effects! Do not expose the equipment to corrosive/aggressive liquids, vapours or mist! Take the equipment out of the hazardous area immediately if it malfunctions or if the enclosure is damaged and bring it into the safe area to put it out of operation! Danger!

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 16 von 21 Caution! Make sure the handheld scanner is placed on a secure supporting surface. If the possible supporting surface such as e.g. table, trolley, stand or holder is not stable, don’t use it. Take care when laying the connection cable that it will not cause anyone to trip and the handheld scanner to be pulled down as a consequence. 5.1 Scanning Technology The scanner has a red laser beam for aiming at the bar code, which corresponds to

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 13 von 21 4.2 Connection to Power Pack Types 17-21BB-0217 and 17-21BB-0018 The BCS 3800 ex handheld scanner is the successor to the BCS 302 ex . The BCS 3800 ex is constructed to be 1:1 interchangeable with the BCS 3800 ex in terms of connection to its power packs types 17-21BB-0217 and 17-21BB-0218. The BCS 3800 ex programming must still be adapted to the system’s interface

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 5 von 21 FCC Ex Protection Type Type label 2.5 Product Marking

  • Bartec BCS 3800, Safety Technical data subject to change without notice. Issue 01/2010 The documents are currently available in English. The product described in this manual has been tested and left the factory in perfect condition as regards meeting safety requirements. To maintain this condition and ensure that this product operates perfectly and safely, it may be used only in the manner described by the manufacturer. Appropriate transportation, suitable storage and careful operation are also essential for the perfect and safe operation of this product. The handheld scanner is a hand-guided ele

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 3 von 21 2 Technical Data 2.1 Ex protection type Typ 17-21BA-0024/.... Ex protection type (Zone 1) II 2G Ex ib IIC T4 -20 °C ≤ Ta ≤ +50 °C Ex protection type (Zone 21) II 2D ibD 21 T135 °C -20 °C ≤ Ta ≤ +50 °C Certification IBExU 09 ATEX 1060 for more data see EC Type Examination Certificate Supply circuit and signal circuit Ex ib IIC Safety Data Maximum input voltage Ui = 5.6 V Maximum input current Ii = 440 mA Maximum input wattage Pi = 1.25 W Maximum internal capacitance Ci

  • GmbH Max-Eyth-Straße 16 Phone: +49 7931 597-0 Contact: 97980 Bad Mergentheim Fax: +49 7931 597-119 [email protected] Germany User Manual Handheld Scanner BCS 3800 ex Type 17-21BA-0024 ATEX Zone 1 and Zone 21 Version 1.00 Dokumenten-Nr. 11-21BA-7D0001 Status: 18. January 2010 Technical data subject to change! Contents Page

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 17 von 21 5.2 Software Settings The scanner is set by means of pre-defined programmable codes. The original manual from HAND-HELD Products for the “Industrial Hand-Held Linear Imager 3800i” can be used for these settings. Diverse parameters can be set with the programmable codes in this manual e.g. the interface parameters for RS-232 or RS-422. enable, disable and settings for the different bar code types settings for the scanner such as volume, trigger mode, time out RESET for resetting t

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 8 von 21 Laser-equipped device products from HAND-HELD Products conform to the US 21 CFR 1040,10 standards as well as EN 60825-1.. The classification of the laser device is specified on a label attached to the device. Class 1 laser devices are classified as not hazardous if used in the manner intended. The following declaration is required to comply with American and international legislation: Caution! The use of controls, adaptations

  • Bartec BCS 3800, Safety Technical data subject to change without notice. Issue 01/2010 The user manual is a constituent part of the product and must be kept in the direct vicinity of the device and accessible at all times to installation, operating and maintenance personnel. It contains important notes, safety instructions and test certificates which are necessary for perfect functioning when the devices are being operated and handled. It is written for technically qualified personnel. Familiarity with and the technically perfect implementation of the safety instructions and warnings described in this manual are preconditions f

  • User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 20 von 21 7 Maintenance, Inspection, Repair Caution! Only trained and qualified personnel may commission and do maintenance work on the Handheld Scanner! Trained qualified personnel are people who are familiar with the installation,

  • Bartec BCS 3800, User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 19 von 21 6.2.1 Approved power packs and supply modules Power pack(s) for BCS3800 ex : Connection information: Interface: Type number/ certification: Power pack for BCS3800 ex with AC 100 V to 250 V in the version for Zones 1/21 Connected to the socket in the power pack by means of a 4-pin connector. See chapter 4.1 Connection to type 17- 21BB-17 0x power packs RS232 or RS422 17-21BB-1700 IBExU09ATEX1091 Power pack for BCS3800 ex

  • User Manual Handheld Scanner BCS 3800 ex Technical data subject to change without notice. Issue 01/2010 Seite 12 von 21 Ex e junction box Terminal Designation X1 +/L L = AC 100V to 250 V + = DC 24 V + = DC 12 V X2 -/N N = neutral conductor - = minus - = minus internally connected to PE X3 PE PE X4 GND GND RS-232 internally connected t

Related Products and Documents (Scanner):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Astonica 05-04-07881 Instruction manual astonica/05-04-07881-3AQ.pdf 16 Aug 2023 2
2 Hyundai HYVI 25 Operation & user’s manual hyundai/hyvi-25-IR6.pdf 08 Nov 2022 32
3 Barco BarcoGraphics 908 Brochure & specs barco/barcographics-908-HN2.pdf 04 Oct 2022 4 0.39 Mb
4 TriStar MX-4163 Instruction manual tristar/mx-4163-422.pdf 18 Nov 2023 4
5 AUDIOBYTE HYDRA X+ Owner's manual audiobyte/hydra-x-H5A.pdf 09 Jan 2023 13
6 Acer LCD Monitor 55.87cm(22”) TFT Color Owner's manual acer/lcd-monitor-55-87cm-22-tft-color-BAY.pdf 17 Jul 2022 20 0.74 Mb

Similar Resources:

  • Epson

    Perfection 3200 Pro

    (21 pages)
    Page 1 of 2PSB.2007.04.001EPSON Product Support BulletinDate: April 2, 2007 Originator: VSPSB #: PSB.2007.04.001 Authorization:Reference: TI 06-0491 Rev.B Total Pages: 2Product(s): Expression 10000XL/1640 XL/1680/1600/800/836 XL, Perfection3490/3590/4490/V700/V750/V100/V350/1240U/1250/1260/1640/1650/1660/1670/2400/2480/2580/3170/3200/4180/4870/4990/640U/12 …
  • HP

    Q1277A

    (4 pages)
    HP Designjet 4500 Printer seriesUnattended color production at low cost • Large input and output capacity. The HP Designjet 4500 Printer series haslarge, flexible input capacity, with two rolls to allow for different mediatypes or sizes, as well as fast automatic roll switching and long roll supportup to 500ft (US) and up to 175m (Europe). It also features …
  • Visioneer

    PaperPort Strobe 500

    (16 pages)
    P APER P ORT S TROBE FOR W INDOWS I NSTALLATION G UIDE 1 W ELCOME Congratulations on your purchase of PaperPort Strobe, a desktop scanner with which you can quickly scan paper documents and color photos to get their electronic images on your computer. W HAT ’ S IN THE B OX Before you start the installation, check the contents of the box to mak …
  • Bounty Hunter

    DISCOVERY 3300

    (24 pages)
    OWNER’S MANUALTheDiscovery 3300is a professional metaldetector. While the mostdifficult aspects of metal detectinghave been automated, it is asophisticated electronic device whichrequires an understanding of some basicfeatures and metal detecting concepts.If you do not have prior experience with ametal detector, we strongly recommend that you:1) Adjust the …
  • Canon

    N670U - CanoScan Flatbed Scanner

    (2 pages)
    Great Scanning. Great Price.The CanoScan N670U scanner is a truly remarkable addition to your homeor workplace. Its intelligent, state-of-the-art features save you time, and theunbelievable price can save you money. Its sleek styling looks great on anydesktop. And the results you’ll achieve are simply spectacular.The little scanner that delivers big result …
  • Epson

    WorkForcePro GT-S50

    (4 pages)
    • FastandHighlyEfcientOne-passDuplexScanningwithDual CCDTechnology• SmartandCompactDesignwithSmallFootprint• ZeroWarm-upTimewithEpsonReadyScanLEDTechnologyHigh Speed Desktop Sheet Fed Scanner Small in Size, Big in EfficiencyEpson/ …

Comments, Questions and Opinions: