Manualios.com

Acorp WR-G+ Operation & User’s Manual

Acorp WR-G+ Manual Online:

3.25, 2043 votes
Acorp WR-G+ User Manual
Acorp WR-G+ User Guide
Acorp WR-G+ Online Manual

Text of Acorp WR-G+ User Guide:

  • WR-G+ 54M Wireless Router User Guide - 41 - There are two default filtering rules of IP Address Filtering, either Allow or Deny passing through the router. ¾ Enable Domain Filtering - set Domain Filtering is enabled or disabled. ¾ Enable MAC Filtering - set MAC Address Filtering is enabled or disabled. You can select the default filtering rules

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 39 - 3. Incoming Port Range cannot overlap each other. 5.7.3 DMZ The DMZ host feature allows one local host to be exposed to the Internet for a special-purpose service such as Internet gaming or videoconferencing. DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must have its DHCP client function disabled and should have a new static IP Address assigned to it because its IP Address may change when using the DHCP function. You can set up DMZ host on this page shown in figure 5-29: Figure 5-29 DMZ To assign a computer or

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 11 - admin for the User Name and Password, both in lower case letters. Then click the OK button or press the Enter key. Figure 4-4 Login Windows Note: If the above screen does not pop-up, it means that your web-browser has been set to a proxy. Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. If the User Name and Password are correct, you can configure the router using the web browser. Please click the Quick Setup link on the left of the main menu and the Quick Se

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 67 - ¾ NAT (Network Address Translation) - NAT technology translates IP addresses of a local area network to a different IP address for the Internet. ¾ PPPoE (Point to Point Protocol over Ethernet) - PPPoE is a protocol for connecting remote hosts to the Internet over an always-on connection by simulating a dial-up connection. ¾ SSID - A Service Set Identification is a thirty-two character (maximum) alphanumeric key identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is typically the con

  • Package contents.............................................................................................................. 1 Chapter 1: About this Guide.............................................................................................. 2 1.1 Purposes.............................................................................................................. 2 1.

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 35 - To Reserve IP addresses: 1. Click the Add New button. (Pop-up figure 5-23) 2. Enter the MAC address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.) and IP address in dotted-decimal notation of the computer you wish to add. 3. Click the Save button when finished. Figure 5-23 Add or Modify a Address Reservation Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. 2. Modify the information. 3. Click the Save button. Click the Enable All button to m

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 56 - Appendix A: FAQ 1. How do I configure the router to access Internet by ADSL users? 1) First, configure the ADSL modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL modem to the WAN port on the router. The telephone cord plugs into the Line port of the ADSL modem. 3) Login to the router, click the “Network” menu on the left of your browser, and click "WAN" submenu. On the WAN page, select “PPPoE” for WAN Connection Type. Type user name in the “User Name” field and password in the “Password”

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 60 - Appendix B: Configuring the PC In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows 95/98. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if needed. 1. Install TCP/IP component (If you use Windows 2000 or later, you can skip this step.) 1) On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel. 2) Double-click the Network icon, click on the Configuration tab in the appearing Network window. 3) Click on the Add button. Select Pr

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 1 - Package contents The following contents should be found in your box: ¾ One WR-G+ wireless Router ¾ One AC power Adapter for WR-G+ 54Mbps Wireless Router ¾ Quick Installation Guide ¾ One Resource CD for WR-G+ 54Mbps Wireless Router, including: • This Guide • Other Helpful Information Note: If any of the listed contents are damaged or missing, please contact the retailer from whom you purchased the WR-G+ 54Mbps Wireless Router for assistance.

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 13 - ¾ Wireless Radio - Indicates whether the Access Point feature of the router is enabled or disabled. If disabled, the WLAN LED on the front panel will not be lit and the wireless stations will not be able to access the router. If enabled, the WLAN LED will be lit up and wireless stations will be able to access the router. ¾ SSID - Enter a value of up to 32 characters. The same SSID must be assigned to all wireless devices on your netw

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 62 - Figure B-5 Gateway tab c. Choose Disable DNS on the DNS configuration tab, as shown in the following figure: Figure B-6 DNS Configuration tab • Setting IP address manually a. Select Specify an IP address on IP Address tab, as shown in the following figure. If the router's LAN IP address is 192.168.1.1, type IP address is 192.168.1.x (x is from 2 to 254), and subnet mask is 255.255.255.0.

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 49 - Figure 5-44 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. Type the domain names your dynamic DNS service provider gave. 2. Type the User Name for your DDNS account. 3. Type the Password for your DDNS account. 4. Click the Login button to login to the DDNS service. ¾ Connection Status -The status of the DDNS service connection is displayed here. Click Logout to logout of the DDNS service. 5.10.2 Oray.net DDNS If your selected dynamic DNS Service Provider is www.oray.net , the page will appear as show

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 31 - 3. Privilege - Select the privileges for this entry, one of Allow / Deny / 64-bit / 128-bit / 152-bit. 4. WEP Key - If you select 64-bit, 128-bit or 152-bit in the Privilege field, enter any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. For example: 2F34D20BE2. 5. Status - Select Enabled or Disabled for this entry on the Status pull-down list. 6. Click the Save button to save this entry. To add additional entries, re

  • Acorp WR-G+, 5.8.5 Remote Management .............................................................................. 45 5.8.6 Advanced Security ................................................................................... 46 5.9 Static Routing..................................................................................................... 47 5.10 DDNS............................................................................................................... 48 5.10.1Dyndns.org DDNS ...............................................

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 29 - • For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 13 ASCII characters. • For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 16 ASCII characters. ¾ Encryption - When you select WPA-PSK/WPA2-PSK or WPA/WPA2 for Authentication Type you can select either Automatic, TKIP or AES as Encryptions. Figure 5-15a WPA-PSK/WPA2-PSK ¾ WPA-PSK/WPA2-PSK Passphrase - You can enter a WPA or WPA2 passphrase between 8 and 63 characters long. �

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 9 - Chapter 4: Quick Installation Guide After connecting the WR-G+ Router into your network, you should configure it. This chapter describes how to configure the basic functions of your WR-G+ Wireless Router. These procedures only take you a few minutes. You can access the Internet via the router immediately after successfully configuring. 4.1 TCP/IP configuration The default IP address of the WR-G+ 54Mbps Wireless Router is 192.168.1.1. And the default Subnet Mask is 255.255.255.0.

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 36 - Any PC that was used for a virtual server must have a static or reserved IP Address because its IP Address may change when using the DHCP function. You can set up virtual servers on this page, shown in figure 5-25: Figure 5-25 Virtual Servers ¾ Service Port - The numbers of External Ports. You can type a service port or a range of service ports (the format is XXX – YYY, XXX is Start port, YYY is End port). ¾ IP Address - The IP Address of the PC providing the service application. ¾ Protocol - The protocol used for this application, either TCP, UDP, or All (a

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 40 - • Internal Port - Internal port, which the router opened for local host. • IP Address - The UPnP device that is currently accessing the router. • Status - Either Enabled or Disabled, “Enabled” means that port is still active, otherwise, the port is inactive. Click Refresh to update the Current UPnP Settings List. 5.8 Security Figure 5-31 The Security menu There are six submenus under the Security menu (shown in figure 5-31): Firewall, IP Address Fi

  • WR-G+ 54M Wireless Router User Guide - 34 - ¾ Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides two DNS servers. Note: To use the DHCP server function of the router, you must configure all computers on the LAN as "Obtain an IP Address automatically" mode. This function will take effect until the route

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 22 - ¾ IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. ¾ Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP. ¾ Default Gateway - (Optional) Enter the default gateway IP address in dotted-decimal notation provided by your ISP. 6. If you choose BigPond Cable, you should enter the following parameters (figure 5-10): Figure 5-10 BigPond Settings ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Auth Server - Enter the authenticating server IP address or host name.

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 25 - ¾ Dynamic IP/ Static IP – Choose either as you are given by your ISP and enter the ISP’s IP address or the domain name. If you choose static IP and enter the domain name, you should also enter the DNS assigned by your ISP. And click the Save button. Click the Connect button to connect immediately, Click the Disconnect button to disconnect immediately. ¾ Connect on Demand - You can configure the router to disconnect from your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to auto

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 45 - To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. 2. Modify the information. 3. Click the Save button. Click the Enable All button to make all entries enabled. Click the Disabled All button to make all entries disabled. Click the Delete All button to delete all entries Click the Next button to go to the next page and click the Previous button to return to the previous p

  • WR-G+ 54M Wireless Router User Guide - 24 - router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of m

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 3 - Chapter 2: Introduction 2.1 Overview of the Router The WR-G+ 54Mbps Wireless Router integrates 4-port Switch, firewall, NAT-router and Wireless AP. Its design is dedicated to Small Office/Home Office (SOHO) wireless network solutions. The WR-G+ 54Mbps Wireless Router will allow you to connect your network wirelessly better than ever, sharing Internet Access, files and fun, easily and securely. In the most attentive wireless security, the WR-G+ 54Mbps Wireless Router provides multiple protection measures. It can be set to turn o

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 15 - Figure 5-1 Router Status 5.3 Quick Setup Please refer to Section 4.2: "Quick Installation Guide." 5.4 Network Figure 5-2 the Network menu There are three submenus under the Network menu (shown in figure 5-2): LAN, WAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 5.4.1 LAN You can configure the IP parameters of LAN on this page.

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 58 - Figure A-6 DMZ 4. I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will interfere with the WEB management port 80 on the router, you must change the WEB management port number to avoid interference. 2) To change the WEB management port number: Login to the router, click the “Security” menu on the left of your browser, and click "Remote Management" submenu. On the "Remote Management" page, type a port number except 80, such as 88, into the "Web Management Port" field. Click “Save”

  • Acorp WR-G+, WR-G+ 54M Wireless Router User Guide - 33 - 5.6 DHCP Figure 5-19 The DHCP menu There are three submenus under the DHCP menu (shown in figure 5-19): DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 5.6.1 DHCP Settings The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PCs that are conn

  • WR-G+ 54M Wireless Router User Guide - 42 - - 2000. Keep the field open, which means all LAN ports have been put into the field. 4. WAN IP Address - Enter a WAN IP Address or a range of WAN IP Addresses in the field, in dotted-decimal notation format. For example, 61.145.238.6 – 61.145.238.47. Keep the field open, which means all WAN IP Addresse

Related Products and Documents (Network Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Metrologic MS9524 Installation and user manual metrologic/ms9524-1AF.pdf 11 Feb 2023 56
2 Craftsman 917.25597 Owner's manual sears/917-25597-6C8.pdf 08 Oct 2022 56 7.75 Mb
3 Wurlitzer 110 Service manual wurlitzer/110-1TO.pdf 06 Feb 2023 24
4 Panasonic RXDS750 - RADIO CASSETTE W/CD Operating instructions manual panasonic/rxds750-radio-cassette-w-cd-GFA.pdf 22 Apr 2023 28 1.24 Mb
5 Beyerdynamic Synexis Operating instructions manual beyerdynamic/synexis-11M.pdf 06 Mar 2023 30 2.5 Mb
6 Panasonic SH-FX65 - Wireless Audio Delivery System Operating instructions manual panasonic/sh-fx65-wireless-audio-delivery-system-779.pdf 21 Apr 2023 12 1.13 Mb

Similar Resources:

  • HPE

    FlexNetwork HSR6800 series

    (260 pages)
    HPE FlexNetwork HSR6800 Routers High Availability Configuration Guide Part number: 5998-4497R Software version: HSR6800-CMW520-R3303P25 Document version: 6W105-20151231 …
  • Cisco

    ONS 15600

    (14 pages)
    CHAPTER1-1Cisco ONS 15600 Procedure Guide, R7.078-17203-011Install the Bay and Backplane ConnectionsThis chapter provides procedures for installing the Cisco ONS 15600. To view a summary of the tools and equipment required for installation, see the “Required Tools and Equipment” section on page 1-2.Before You BeginThis section lists the chapter procedure …
  • H3C

    S9500 Series

    (16 pages)
    Operation Manual – QinQ H3C S9500 Series Routing Switches Table of Contents i Table of Contents Chapter 1 QinQ Configuration ..................................................................................................... 1-1 1.1 QinQ Overview............................................................................................................. …
  • Digi

    TransPort WR41 EVDO

    (2 pages)
    1 What’s in the boxConnect the hardwareTransPort WR41 2Power Supply(some models may have a DC power cord or have no power supply)Mounting Tips: Position the Digi TransPort WR41 on a flat, level surface or via wall-mount, rackmount, or DIN rail mounting brackets in a location with adequate ventilation. The unit is designed for indoor use. Do not expose …
  • Makita

    3620

    (18 pages)
    GB RouterInstruction ManualF DéfonceuseManuel d’instructionsDOberfräseBetriebsanleitungI FresatriceIstruzioni per l’usoNL BovenfreesGebruiksaanwijzingE FresadoraManual de instruccionesPTupia Manual de instruçõesDKOverfræserBrugsanvisningSHandöverfräsBruksanvisningNHåndoverfresBruksanvisningSFYläjyrsin KäyttöohjeGR Ρούτερ Οδηγίες � …
  • Cisco

    3560-48TS - Catalyst EMI Switch

    (8 pages)
    Brochure All contents are Copyright © 1992–2006, 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 8 Cisco Catalyst 3560 Series Switches Foundation for Innovation-Powered by Cisco Figure 1. Catalyst 3560 Series Switches The Cisco® Catalyst® 3560 Series (Figure 1) is a line of fixed-configuration …

Comments, Questions and Opinions: