Manualios.com

ACTi CAM-7200 series Hardware User Manual

ACTi CAM-7200 series Manual Online:

4.5, 1836 votes
ACTi CAM-7200 series User Manual
ACTi CAM-7200 series User Guide
ACTi CAM-7200 series Online Manual

Text of ACTi CAM-7200 series User Guide:

  • ACTi CAM-7200 series, 0-1 0 PRECAUTIONS 1. Read these instructions All the safety and operating instructions should be read before the product is operated. 2. Heed all warnings All warnings on the product and in the instruction manual should be adhered to. The symbol indicates the following items, please carefully read the description next to each symbol. a. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other equipment. b. The requirements to make this device work, including

  • ACTi CAM-7200 series, 0-2 and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

  • 0-3 Table of Contents 0 PRECAUTIONS________________________________________________ 0-1 Trademarks ________________________________________________________________ 0-1 Liability ___________________________________________________________________ 0-1 FCC/CE Regulation __________________________________________________________ 0-1 1 INTRODUCTION _________________________________________

  • 0-4 3 Adjust the camera______________________________________________ 3-21 3.1 Adjust zoom and focus __________________________________________ 3-21 3.2 Adjust CCD functions___________________________________________ 3-21

  • ACTi CAM-7200 series, 1-1 1 INTRODUCTION 1.1 Package Contents CAM-7200 series Power Adaptor (Option) (DC12V / PoE) Product CD Accessory Warranty Card 1

  • ACTi CAM-7200 series, 1-2 1.2 Features and Benefits The CAM-7200 series is a cutting-edge digital video transmission device. It can compress and transmit real time images with outstanding images quality (D1, 720x480) at reasonable bandwidth through a standard TCP/IP network. That is because it is Ethernet (LAN and WAN) ready and has the powerful ARM9 SoC and the MPEG-4 compression ASIC inside. In addition, with these powerful hardware platform, excellent SDK support and powerful respective apparatuses (e.g. the transcoder), this CAM-7200 series is your best choice building up either conventional IP surveillance system or intelligent IP surveillance system. z

  • 1-3 (Point-to-Point over Ethernet) which has excellent transmission speed and enables the CAM-7200 series to connect to an ADSL or a cable modem. z DDNS Supported The CAM-7200 series supports DDNS (Dynamic Domain Name Server), users can set the CAM-7200 series at a virtual domain name (such as cam1.Taipei.xxx) at dynamic IP. Everyone can use the virtual domain name to view the video any

  • ACTi CAM-7200 series, 1-4 1.3 Safety Instructions z Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipments / personnel, if you use a power supply with different voltage than the one included with this device. All warranty of this product will be voided in the situations above. z Don’t open the housing of the product z Cleaning Disconnect this video product from the power supply before cleaning. z Attachments Do not use attachments not recommended by the video product manufacturer as they may cause hazards. z Water and Mois

  • ACTi CAM-7200 series, 1-5 operating Instructions in this manual. Adjust only those controls that are covered by the instruction manual as an improper adjustment . Other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation. z Safety Check Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.

  • ACTi CAM-7200 series, 1-7 1. DI/O z DI: To Trigger Logic Level 0: 0~0.4V; Normal Logic Level 1: 3.3~30V PIN NAME DESCRIPTION 1 GND Ground Pin 2 DI Digital Input 3 GND Ground Pin 4 DO Digital Output

  • ACTi CAM-7200 series, 1-8 DO: To Trigger Logic Level 0: 0.1~0.6V; Normal Logic Level1: 2.4~5V 2. Power Input Please use DC12V power Input. Please follow the description on the connector to connect to power. 3. Analog Video Output The CAM-7200 series supports one channel analog video output. 4. WAN port The IP Camera connects to the WAN (wide area network) via a standard terminal block. Supporting NWAY, this IP camera can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet). The WAN port is for FTTH and can connect to an xDSL or cable modem. The Network connector is Terminal block instead of RJ-45 port, please based on the label color on the conn

  • 1-9 camera will get the power from the first power input plugged into it. 5. Screw Holes These screw holes are used to fasten the CAM-7200 series. 6. LAN port The IP Camera connects to the LAN (local area network) via a standard terminal block. Supporting NWAY, this IP camera can auto detect the speed of local network segment (10Base-T/100Base-

  • ACTi CAM-7200 series, 1-10 8. Reset Button Step 1: Switch off IP camera by disconnecting the power cable Step 2: Using a suitable pointed object, press and continue to hold the Reset Button depressed. While continuing to hold the reset button depressed, reconnect the power cable. Step 3: Keep holding the reset button depressed around 6 seconds, release the reset button. The unit will start up with factory default settings 9. Cable Exit These cable exits are used for cables to go through. Please cut it with tools. 10. Zoom Lever Move this lever to adjust the optical zoom. After adjusting, rotate it

  • ACTi CAM-7200 series, 1-11 z Back Light Compensation ON/OFF (Switchable) z Flickless ON/OFF (Switchable) z Automatic Gain Control ON/OFF (Switchable) 13. Video DC level Adjustment Rotate it adjust the overall lighting for this camera.

  • ACTi CAM-7200 series, 2-12 2 Installation Procedure There are three types of installation of this CAM-7200 series. Surface mount Flush mount Wall mount Pictures Optional Bracket required ● ● The mounting procedure can be divided into two parts, 1st: Connect the CAM-7200 series 2 nd : Mount the CAM-7200 series 2.1 Connect the IP Indoor Fixed Dome 2.1.1 Remove the cover Please remove the dome cover first. 2.1.2 Open the dome bottom Release these 3 screws to open the dome bottom. 2.1.3 Insert the cable You have to inse

  • ACTi CAM-7200 series, 2-13 Hole3: Power cable, DI/DO cable For example, 2.1.4 Connect the cables to connectors Please follow the instruction at Chapter 2 for how to connect to each connector. 2.1.5 Select a cable exit and cut There are three cable exits for cable to run out the CAM-7200 series. Please elect according to your installation and use appropriate tool to cut.

  • ACTi CAM-7200 series, 2-15 2.2 Mount the IP Indoor Fixed Dome (Surface) 2.2.1 Place the camera on the surface and aim to your shooting direction Please aim the arrow here to your shooting direction. 2.2.2 Fasten the camera with 2 screws Please aim the arrow here to your shooting direction.

  • ACTi CAM-7200 series, 2-16 2.3 Mount the IP Indoor Fixed Dome (Flush) 2.3.1 Flush Bracket Contents 1. Flush Bracket 2. Flush Ring 3. Accessory 2.3.2 Assembly the Flush Ring Please refer to the picture to assembly the flush ring.

  • ACTi CAM-7200 series, 2-18 2.3.5 Insert the Flush Bracket into the hole If you cannot inset the bracket, you might need to rotate the screws counterclockwise to release the clip. After you insert the Flush Bracket, rotate the screws clockwise to fasten the Flush Bracket to the ceiling. 2.3.6 Fix the Flush ring Insert the flush ring to the Dome camera and turn the flush ring clockwise to fix it onto the flush bracket.

  • ACTi CAM-7200 series, 2-20 2.4 Mount the IP Indoor Fixed Dome (Wall) 2.4.1 Wall Mount Bracket contents 1. Wall Bracket 2. Accessory 2.4.2 Mount Bracket on the wall Mount the bracket on the wall using the screw sets provided. 2.4.3 Mount Camera to the Bracket

  • ACTi CAM-7200 series, 3-21 3 Adjust the camera 3.1 Adjust zoom and focus Please adjust the camera direction first. Then Move the focus and the zoom lever at the Chapter 1 to adjust the zoom and the focus. Fix the zoom and focus after adjusting. 3.2 Adjust CCD functions Refer to Chapter 1 for what can be adjusted and how to adjust. 3

Related Products and Documents (Security Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 BMW D190Z Brochure & specs bmw/d190z-N9B.pdf 13 Mar 2024 2 1.75 Mb
2 Agri-Fab Repair Parts For Poly Cart 45-01754 Repair parts agri-fab/repair-parts-for-poly-cart-45-01754-4A4.pdf 31 Jan 2024 2 0.18 Mb
3 Avery Weigh-Tronix PC-220 Operation & user’s manual avery-weigh-tronix/pc-220-33D.pdf 24 Dec 2022 20
4 Dremel PL400 Operating/safety instructions dremel/pl400-9G1.pdf 11 Nov 2022 2 1.02 Mb
5 Sony EV-S2000 Operating instructions manual sony/ev-s2000-33A.pdf 22 Aug 2023 72 5.36 Mb
6 Blue Rhino UniFlame WAD517A Owner's manual blue-rhino/uniflame-wad517a-ONQ.pdf 09 Jan 2023 5 1.22 Mb

Similar Resources:

  • Digiop

    BLK-IPS101

    (4 pages)
    1www.digiop.comBLK-IPS101_CQ 5/27/11Attach peripheral devices to the terminal blocks as needed. For detailed interface specications, refer to the user manual. Step 2. Connect the camera to the LANAttach the network LAN cable to the Ethernet connector on the camera backpanel. Your camera can be powered locally with a 12 V DC adapter, or across the LAN (Po …
  • Panasonic

    BL-C111A - Network Camera - Pan

    (11 pages)
    HomeLogic LLC ● 100 Hoods Lane ● Marblehead, MA 09145 ● Phone (781) 639-5155 ● Fax (781) 639-9677 OneHome™ Management and Control Solutions Camera Integration Note Manufacturer: Panasonic Model Number(s): BL-C111A, BL-C131A (wireless) Comments: Network Camera (version 3.10) Document Revision Date: 5/19/2011 NOTE: This document refers to Camer …
  • Swann

    DVR4-1000

    (2 pages)
    www.swannsecurity.comSwann Communications • Toll Free Technical Support: USA - 1-800-627-2799, 1-877-274-3695, Australia - 1300 13 8324 • Email: [email protected] - Easy Setup GuideConnecting the DVR to TVCBack of DVRBack of TVINPUTConnect the yellowRCA cable to an INPUTon the back of your TV1Connect the BNC endof the cable to the topVIDEO INPUT …
  • Arlo

    Pro

    (5 pages)
    My Arlo Pro or Arlo Pro 2 camera battery isn’t charging; what do I do? To troubleshoot problems with your Arlo Pro or Arlo Pro2 camera battery: 1. Make sure that you’re using the charger that came in the box with your camera or the charging station (sold separately) that’s compatible with your Arlo Pro camera to charge your camera’s rechargeable bat …
  • Axis

    241Q

    (3 pages)
    5AXIS 241Q/241S - Product DescriptionProduct DescriptionThe AXIS 241Q/S is a new generation, full-featured video serv er for security su rveillance and rem o te monitoring needs, based around the new AXIS ARTPEC-2 com pression chip. It has the ability to digitize up to 4 analog video so u rces and make these available on the network as stream s of rea l ti …
  • Vivotek

    SD83xxE

    (11 pages)
    Quick Installation GuideVIVOTEK INC.6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.|T: +886-2-82455282| F: +886-2-82455532| E: [email protected] USA, INC. 2050 Ringwood Avenue, San Jose, CA 95131|T: 408-773-8686| F: 408-773-8298| E: [email protected] NEMA 4x • IP66 • Extreme Weatherproof All specications are subje …

Comments, Questions and Opinions: