Gericom GTW3208 Picasso Operation & User’s Manual

Text of Gericom GTW3208 Picasso User Guide:

• Gericom GTW3208 Picasso, 6 SAFETY ADVICE Follow all safety instructions. Un-plug the monitor from the mains before cleaning. To clean, wipe with a damp cloth, do not use any liquid detergent or sprays. Never connect accessories which have not been expressly permitted by the manufacturer. Such accessories could increase the risk of burns, electric shocks and other injuries. Do not place the monitor near to water, e.g. baths, sinks, washing machines, swimming pools, etc. Do not place the monitor on an unstable trolley, stand, tripod, frame, table or floor whe

• Gericom GTW3208 Picasso, 12 SCREEN INSTALLATION: Installation: Stand – Table User´s Guide 1. If not assembled, screw the bar into the foot stand (see Diagram) 2. Use screw type A (8x18) for this. A-screw Bar Stand base Stand Bar 3. Attach the foot stand to the appliance 4. B-Screw in (4X30) 5. C-Screw in (4 x 16 ) Footstand opening insert footstand

• Gericom GTW3208 Picasso, 3  Fine Tune................................................................................................................................................ 41 TV SOUND ........................................................................................................42  Mode........................................................................................................................................................ 42  Volume ......................................................................

• Gericom GTW3208 Picasso, 18 Remote control Key Operations Key Name Operation 1.Power ► Power On/Off 2.Menu ► Same as Menu key on keypad. 3. Up ► Same as Up key on keypad 4. Down ► Same as Down key on keypad 5. Right ► Same as Right key on keypad 6. Left ► Same as Left key on keypad 7. Select ► Same as Select key on keypad 8. Info ► Displays input source information 9. Sleep Time ► Displays current sleep timer value by minute when no sleep timer OSD activated ►

• Gericom GTW3208 Picasso, 47 TV SOUND ▶ Sound Mode 1. Press MENU button to display the main OSD menu. 2. Select the Sound main menu with CH+/CH- button on the remote control. 3. Press ENTER to enter the sub menu. 4. Select the Sound Mode 5. Select the Sound Mode with VOL+/VOL- button.

• Gericom GTW3208 Picasso, 53 SETUP ▶ Time ▶ On Time Volume Set the sound volume level when PDP/LCD power on automatically. - Available only when the Time is set and On Time is ON. 1. Press MENU button to display the main OSD menu. 2. Select the TIME main menu with CH+/CH- button on the remote control. 3. Press ENTER to enter the sub menu. 4. Select On Time Volume. 5. Adjust the sound volume level wit

• Gericom GTW3208 Picasso, 40 TV CHANNEL ▶ Name 1. Press MENU button to display the main OSD menu. 2. Select the Channel main menu with CH+/CH- button on the remote control. 3. Select the Name menu with CH+/CH- button on the remote control. 4. Press ENTER to enter the sub menu. Then you can see the sort program list. 5 You can change a program Name if you want to change the name of the program. ▶ TO CHANGE THE PROGRAM NAME IN THE LIST If you want to change a program Name, press ENTER button. Then you can ty

• Gericom GTW3208 Picasso, 43 TV SOUND ▶ Volume 1. Press MENU button to display the main OSD menu. 2. Select the Sound main menu with CH+/CH- button on the remote control. 3. Press ENTER to enter the sub menu. 4. Select Volume and press ENTER button to enter the sub menu. Then you can see the Volume bar. 5. Adjust the Volume with VOL+ or VOL- button.

• 34 TV CHANNEL ▶ Manual Store ▶ Sound System 1. Press MENU button to display the main OSD menu. 2. Select the Channel main menu with CH+/CH- button on the remote control. 3. Select the Manual Store menu with CH+/CH- buttonand press

• Gericom GTW3208 Picasso, 39 TV CHANNEL ▶ Sort 1. Press MENU button to display the main OSD menu. 2. Select the Channel main menu with CH+/CH- button on the remote control. 3. Select the Sort menu with CH+/CH- button on the remote control. 4. Press ENTER to enter the sub menu. Then you can see the sort program list. (notice: You can’t see the sort program list on this picture since this picture isn’t a real operating mode but a design mode.) 5. You can select a program with CH+/CH- button on the r

• Gericom GTW3208 Picasso, 62 PICTURE (PC) ▶ Size 1. Press MENU button to display the main OSD menu. 2. Select the picture main menu. 3. Press ENTER to enter the sub menu. 4. Select the Size with CH+/CH- button. 5. Select a favorite Size with VOL+/VOL- button. 6. Press Exit button to return.

• Gericom GTW3208 Picasso, 22 OSD Menu Structure . OSD (On Screen Display) allows users to control or adjust various features and settings in accordance with his/her preferences. . Press the MENU button on the remote control to see the main OSD menu. Example of OSD Menu 1. Main Menu Press the MENU/ button on the remote control to enter the main OSD menu. First, select Main menu item you need with CH+ & CH- button. To select a main menu items, just press VOL+ or ENTER button on the Remote Control. 2. Sub Menu Each menu item has its own sub menu items to set. 3. Sub Menu items A : If there

• Gericom GTW3208 Picasso, 28 PICTURE ▶ NR 1. Press MENU button to display the main OSD menu. 2. Select the picture main menu. 3. Press ENTER to enter the sub menu. 4. Select the NR with CH+/CH- button. 5. Select a favorite NR with VOL+/VOL- botton.. ☞ Low -> Middle -> High -> Off -> Low -> … 6. Press Exit button to return

• Gericom GTW3208 Picasso, 32 TV CHANNEL ▶ Manual Store ▶ Prog. 1. Press MENU button to display the main OSD menu. 2. Select the Channel main menu with CH+/CH- button and press ENTER button. 3. Select the Manual Store menu with CH+/CH- button on the remote control. 4. Select the Prog. menu with CH+/CH- button on the remote control. 5. You can select the Prog using VOL+/VOL- button.

• 36 TV CHANNEL ▶ Manual Store ▶ Search 1. Press MENU button to display the main OSD menu. 2. Select the Channel main menu with CH+/CH- button on the remote control. 3. Select the Manual Store menu with CH+/CH- button and press

• Gericom GTW3208 Picasso, 20 Basic Operation Turning PDP/LCD TV On And Off Press Power button on the remote control. The PDP/LCD will turn on and you will be ready to use its features. You can also use the Power key on the front panel. Sometimes there is also a Power key on the back panel to switch the device completely OFF or into the standby mode. Select Source Press Source button on the remote control. Then you can see the source list menu shown as below. Press CH+ / CH- button on the remote control to select the sour

• Gericom GTW3208 Picasso, 55 SETUP ▶ OSD Tone 1. Press MENU button to display the main OSD menu. 2. Select the Setup main menu with CH+/CH- button on the remote control. 3. Press ENTER to enter the sub menu. 4. Select OSD Tone. 5. Adjust OSD Tone level with VOL+, VOL- button.

• Gericom GTW3208 Picasso, 51 SETUP ▶ Time ▶ Off Timer This PDP/LCD can be set to turn off automatically at specific time that you chose. Before using timer, you must set the PDP/LCD’s Time as described previously. 1. Press MENU button to display the main OSD menu. 2. Select the TIME main menu with CH+/CH- button on the remote control. 3. Press ENTER to enter the sub menu. 4. Select Off Timer by pres

• Gericom GTW3208 Picasso, 2 Contents Contents..............................................................................................................2 SAFETY ADVICE:..............................................................................................4 Attention: PLEASE NOTE..........................................................................10 ACCESSORIES:............................................................................................... 11 SCREEN INSTALLATION:.............................................................................12 Installat

• Gericom GTW3208 Picasso, 29 TV CHANNEL ▶ Country 1. Press MENU button to display the main OSD menu. 2. Select the Channel main menu. 3. Press ENTER to enter the sub menu. 4. Select the Country with CH+/CH- button. 5. Select your Country with VOL+/VOL- button. 6. Press Exit button to return.

• Gericom GTW3208 Picasso, 27 PICTURE ▶ Size 1. Press MENU button to display the main OSD menu. 2. Select the picture main menu. 3. Press ENTER to enter the sub menu. 4. Select the Size with CH+/CH- button. 5. Select a favorite Size with VOL+/VOL- button. ☞ Auto Wide -> Wide -> Panorama -> Zoom -> 4:3 -> 14:9 -> Auto Wide -> … 6. Press Exit button to return.

• Gericom GTW3208 Picasso, 42 TV SOUND ▶ Mode Your PDP/LCD has four automatic sound settings (“Standard”, “Music”,“Movie”,:Speech”)that are preset at the factory. You can active either Standard, Movie, Music or News by pressing “SOUND”on the remote control(or by making a selection from the menu) or you can select “Custom” which automatically recalls your personalized sound settings. 1. Press MENU button to display the main OSD menu. 2. Select the Sound main menu with CH+/CH- button on the remote co

• 35 TV CHANNEL ▶ Manual Store ▶ Channel 1. Press MENU button to display the main OSD menu. 2. Select the Channel main menu with CH+/CH- button and press ENTER button. 3. Select the Manual Store menu with CH+/CH- button on the remote control. 4. Select

• Gericom GTW3208 Picasso, 44 TV SOUND ▶ Balance This control allows you to adjust the balance of the left and right apeaker output. 1. Press MENU button to display the main OSD menu. 2. Select the Sound main menu with CH+/CH- button on the remote control. 3. Press ENTER to enter the sub menu. 4. Select Balance and press ENTER button to enter the sub menu. Then you can see the Balance bar. 5. Adjust the Balance with VOL+ or VOL- button.

• Gericom GTW3208 Picasso, 61 PICTURE (PC) If you select Custom in the Colour Tone popup window on PC, you can select sub modes like as Red, Green, and Blue.. ▶ Color Tone 1. Press MENU button to display the main OSD menu. 2. Select the picture main menu. 3. Press ENTER to enter the sub menu. 4. Select Colour Tone and press ENTER button to enter the sub menu. Then the Colour Tone sub mode appears. 5. Select Red(R) and press ENTER button to enter the sub menu. Then the setting bar appears. 6. You can adjust each values of the Colo

• 10 Attention: PLEASE NOTE  Picture freezing Please do not leave a single image (e.g. from a video game) showing on the plasma or LCD monitor, this can lead to the screen freezing. This phenomenon is also known as ‘Screen Burn’. In order to avoid this phenomenon, please reduce the brightne

• 48 SETUP ▶ Reset 1. Press MENU button to display the main OSD menu. 2. Select the Setup main menu with CH+/CH- button on the remote control. 3. Press ENTER to enter the sub menu. 4. Select Reset and press ENTER button to enter the sub menu. 5. If you

Related Products and Documents (TV):

Comparable Devices:

Similar Resources:

• RCA HD30W854T (2 pages) HD30W854T30” diagonal RCA TruFlat™ Stereo HDTVProduct Size (H x W x D): 24.1 x 35.25 x 23 inchesFeatures and BenefitsBuilt-in ATSC/NTSC/QAM Tuner for Access to Off-Air Digital Programming or Unscrambled Digital Cable*Comb Filter Creates a Sharp and Clear PictureComponent Input ConnectionPicture Format Control Displays 16:9 or 4:3 ProgrammingCustomiza …

• Monster 57LX177 (1 pages) PLASMA & FLATSCREEN Plasmas, Especially in High Definition, Can Provide an Incredible Picture, But Only with the Right Connections • To get High Definition video (720p, 1080i), you need to use component video cables. S-Video or composite video connections should only be used when component video is not available.• To get Dolby Digital® and DTS� …

• Symphonic WFR205 (90 pages) ANTENNAINAUDIO OUTAUDIO INS-VIDEOAUDIOOUTDIGITALAUDIO OUTCOAXIALCOMPONENTVIDEO OUTVIDEO OUTVIDEO INLYINOUTDVDDVD/VCRPB/CBPR/CRLRLRROUTDVDDVDDVD/VCR(Back of this unit)[Cable Box or Satellite Box]INOUTORORIndoor or Outdoor AntennaFrom Cable Company(No Cable Box)From Cable or Satellite CompanyAUDIO INVIDEO INVideo cable (supplied)(Back of TV)ConnectConnect23Aud …

• JVC AV-30W777/S (38 pages) COPYRIGHT © 2006 Victor Company of Japan, LimitedNo.YA3902006/7COLOR TELEVISIONYA39020067AV-30W767/S,AV-30W777/SPOWERTHEATER PROVIDEO STATUSSLEEPTIMERFAVORITESUB CH174TUNE396RETURN+/TVMUTINGMENUOKBACK2805CH +VOL–VOL+RECOPEN/CLOSESTILL/PAUSESTOP PAUSEPLAY FFREWTVCATV VCRDVDVCR CHANNELPREV NEXTTV/VCRVCR/DVDPOWERASPECTCH –TVRM-C1272GML/MTS SOUND GUIDEDISP …

• Toshiba 19LV611U - 18.5" LCD TV (88 pages) TOSHIBAHIGH-DEFINITION TELEVISION•"I'136jim;'HIGH-DEFINITIONMULTIMEDIAINTERFACE~VIDEOmJDO~@[DIGITALVIDEO}illJDD~rnDIGITALAUDID19/22/26-inch*classLCDTV/DVDCOMBINATION19LV610U19LV611U22LV610U22LV611U26LV610U[l]DOLB'lDIGITAL I~dtiDigitalOuteon""",..IITV'''~11on1I....,.Ioy"okIIAd,,"""." …

• Samsung 6+ series (87 pages) LED TVuser manualimagine the possibilitiesThank you for purchasing this Samsung product. To receive more complete service, please register your product atwww.samsung.com/registerModel _____________ Serial No. _____________E-MANUAL© 2011 Samsung Electronics Co., Ltd. All rights reserved.BN68-03474A-00Contact SAMSUNG WORLDWIDEIf you have any questions or comm …

Comments, Questions and Opinions: