Manualios.com

Cellient MHN200 Operation & User’s Manual

Cellient MHN200 Manual Online:

3.05, 1864 votes
Cellient MHN200 User Manual
Cellient MHN200 User Guide
Cellient MHN200 Online Manual

Text of Cellient MHN200 User Guide:

  • 2 Table of Contents TABLE OF CONTENTS .................................................................................................................................... 2 1. INTRODUCTION ........................................................................................................................................ 4 1.1 Package Contents ............................

  • Cellient MHN200, 3 Preface This manual describes the Web User Interface of the mobile hot-spot. This document provides a complete guide to configure and use the mobile hot-spot. Audience Target audiences are the customers who configure and administer the mobile hot-spot. This manual makes it easier for the customers to enhance the offerings or to customize the mobile hot-spot to their own services. Typographic Conventions This manual uses the following conventions. [Table 1] Typographic Conventions Item Convention Keys Boldface Field Names Boldface

  • Cellient MHN200, 4 1. Introduction 1.1 Package Contents • Mobile Hot-Spot • Power Adapter • Car Charger • Quick Guide • Battery 1.2 Mobile Hot-Spot Interfaces [A] Antenna: Sub antenna for diversity [B] Display: OLED display for CDMA and hot-spot status icons and messages [C] Power button: Power on/off by pressing for more than 3 seconds. Also a status indicator by 3-color LED [D] Power adaptor connection: Connector for battery charging (Only use the USB cable and the 5.0-volt power adaptor and car charger supplied in the package box) [E] Antenna: Main Ante

  • Cellient MHN200, 5 1.3 Display Icons Icons Description Strength of the CDMA signal (levels 0 ~6) Internet (data call) connection status No service status Wi-Fi on/off status Battery level Battery charging indicator while charging 1.4 Battery Time Conditions Description Continuous use 3.5 hours while using in good signal status Stand-by 8 hours Charging 3.5 hours from empty to full charge with power off 5 hours with power on 1.5 Display Messages Messages Description Net1 Operator name displayed while booting Net1 M-90 1234 SSID displayed when entering into normal operation (“

  • Cellient MHN200, 6 1.7 Technical Specifications Parameters Specifications Size 54.5 x 103.2 x 17.2mm Weight 110g Battery Type 3.7V Polymer Operating Temperature -20 to +70°C Storage Temperature -30 to +80°C Humidity 85% Non-condensing Stand-by Time 8 hours Usage Time 3.5 hours Adaptor Input 100 ~ 240VAC 50/60Hz 0.15A Adaptor Output 5VDC 1A

  • 7 2. Getting Started This section explains how to configure the mobile hot-spot using the Web User Interface (Web-UI) provided. This document assumes that you already have the mobile hot-spot and are now ready to do the configuration (i.e., power on, connected to the CDMA network, Wi-Fi on, etc.) You need to use the administrator right to configure all

  • Cellient MHN200, 8 2.3 Overview The mobile hot-spot Web-UI is displayed as shown in Figure 2. The screen is refreshed every 30 seconds. [Figure 2] Web-UI Homepage The screen contains following details. [Table 3] Fields in the Homepage Field Description SYSTEM Device Name Current SSID of Wi-Fi interface Battery Level Current level of battery Firmware Version Current software version of mobile hot-spot CDMA Version Current CDMA Modem version Modem ESN Current CDMA Modem ESN(Electronic Serial N

  • 9 3. Internet You can view Internet link in the left navigation pane. Followings are the options available under Internet. • Network Information • LAN Settings • Clients List • CDMA Settings 3.1 Network Information To get information of Network, click Network Information link. A screen is displayed as shown in Figure 3. The screen is refreshed

  • Cellient MHN200, 10 The screen contains the following details: [Table 4] Fields in Network Information Field Description NETWORK Service Mode Service information can be: • No Service • 1X • EVDO in network Rev. 0 • EVDO in network Rev. A • EVDO in network Rev. B Mode Preference Shows the service mode which can be: • Hybrid • 1X Only • EVDO Only Packet State Current packet state of modem Carriers Current count of assigned multi-carrier Total DRC Total network assigned data rate of carriers CARRIER [#] Channel Current CDMA channel number RSSI RSSI value (Unit: –dBm). The bigger the number is, the weaker the r

  • Cellient MHN200, 11 Field Description IP Address Current local IP address. If changed, you should reconnect mobile hot-spot. Subnet Mask Current subnet mask. You can change according to IP class. MAC Address Shows the mobile hot-spot hardware address. DHCP IP Range Current DHCP IP range. You can increase accessible user count. DHCP Lease Time Current DHCP lease time of allocated DHCP IP address. • Click “Apply” at any time during configuration to save the information that you have entered.

  • Cellient MHN200, 12 3.4 CDMA Settings To configure CDMA parameters, click CDMA Settings link. A screen is displayed as shown in Figure 6. [Figure 6] CDMA Settings The screen contains the following details: [Table 7] Fields in CDMA Settings Field Description Dial Number Dial-Up number for CDMA data call Username Username for CDMA data call Password Password for CDMA data call • Click “Apply” at any time during configuration to save the information that you have entered. • Click “Cancel” to exit from this page without saving the changes.

  • Cellient MHN200, 13 4. Wi-Fi You can view Wi-Fi link in the left navigation pane. Followings are the options available under WI-FI. • Settings • Security Caution: • After changing any of the Wi-Fi settings, you must normally reconnect over Wi-Fi in order to access the Internet and the Web-UI. 4.1 Settings You can configure basic Wireless Settings for communication, such as Network Name (SSID) and Channel. To configure the Wi-Fi interface, click Settings link. A screen is displayed as shown in Figure 7. [Figure 7] Wireless Settings The screen contains the following details. [Table 8] Fields in Wi-Fi Settings Field Description Network Mode

  • Cellient MHN200, 14 Rate Specify the channel bandwidth. • Click “Apply” at any time during configuration to save the information that you have entered. • Click “Cancel” to exit from this page without saving the changes. 4.2 Security To configure the Wi-Fi Security, click Security link. A screen is displayed as shown in Figure 8. [Figure 8] Wireless Security The screen contains the following details. [Table 9] Fields in Wi-Fi Security Field Description Net1 M-90 3893 (“3893” is an example) Security Mode Used to specify the WLA

  • 15 WPA Algorithms Select TKIP, AES, or TKIPAES Pass Phrase Input Pass Phrase (also called Password or Key) Key Renewal Interval Key Renewal Interval time ACCESS POLICY Policy Select “Disable” to de-activate the Access Policy; select “Allow” to allow specific device(s) to connect to the mobile hot-spot; select “Reject” to prevent specific devi

  • Cellient MHN200, 16 5. Firewall You can view Firewall link on the left navigation pane. Following are the options available under Firewall. • Port Forwarding • Virtual Server 5.1 Port Forwarding To configure Port Forwarding, click Port Forwarding link. A screen is displayed as shown in Figure 9: [Figure 9] Port Forwarding The screen contains the following details. [Table 11] Fields in Port Forwarding Field Description Forwarding To enable or disable the port forwarding IP Address To enter the IP Address of a specified local machine Port Range To assign a range of port or specific port number to route

  • Cellient MHN200, 17 5.2 Virtual Server To enable Virtual Server, click Virtual Server link. A screen is displayed as shown in Figure 10: [Figure 10] Port Forwarding The screen contains the following details. [Table 12] Fields in Virtual Server Field Description Virtual Server To enable or disable the virtual server. IP Address To enter the IP Address of a specified local machine Public Port To assign a specific port number to route the packets Private Port To assign a user setting or specific port number to route the packets Protocol To assign protocol type

  • Cellient MHN200, 18 6. Administration You can view the Administration link on the left navigation pane. Followings are the options available under System. • Management • Upgrade • Settings • Manual 6.1 Management To change user ID and the password for the administrator, click Management link. A screen is displayed as shown in Figure 11. [Figure 11] System Management This menu does not add new user but makes user ID and the password change. Only 1 administrator is available on the mobile hot-spot. The screen contains the following details: [Table 13] Fields in Administrator Settings

  • 19 • Click “Apply” at any time during configuration to save the information that you have entered. • Click “Cancel” to undo any changes. 6.2 Upgrade To upgrade the system firmware, click on the Upgrade link. A screen is displayed as shown in Figure 12. [Figure 12] Firmware Upgrade • After choosing a system firmware file, click “Apply” t

  • Cellient MHN200, 20 7. Default Configuration 7.1 Hostname SSID Net1 M-90 1234 See the OLED display or the label inside the battery cover (“1234” is an example) Security mode Security mode WPA2-PSK Password 12345678 Click button and see the Display LCD or label (“12345678” is an example) 7.2 User IP Address IP Address 192.168.0.100 — 192.168.1.109 Default Gateway 192.168.0.1 DNS Server Network assigned DNS server 7.3 Web Server IP Address 192.168.0.1 Username admin Password admin 7.4 Other Setti

  • Cellient MHN200, 21 8. Troubleshooting 8.1 I forgot Login ID and Password / I forgot IP address after changing IP address Use your mobile hot-spot after restoring the configuration into factory-default value. How to restore the configuration? • Press “reset” button for more than 2 seconds and release in normal status. • User can see Power Button LED is blinking. • After about 15 seconds, mobile hot-spot is automatically turned off. • When re-powered on, you can see the configuration is changed to

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Audiovox LCM641CS Manual  audiovox/lcm641cs-Q8C.pdf 25 Jul 2023 12 4.92 Mb
2 Jacuzzi Steam Generator SteamPro 120 Installation and operating manual jacuzzi/steam-generator-steampro-120-TA8.pdf 04 Mar 2023 15
3 GE JB680SPSS Dimensions and installation information ge/jb680spss-MKG.pdf 31 Jan 2023 2 0.23 Mb
4 AMD Am186 Operation & user’s manual amd/am186-V5N.pdf 15 Feb 2023 168
5 Messoa NDR891(H) Operation & user’s manual messoa/ndr891-h-24J.pdf 22 Jul 2022 56
6 Philips 42221-30-26 Brochure philips/42221-30-26-R1Q.pdf 13 Nov 2023 3 1.28 Mb

Similar Resources:

  • Linksys

    WAG54GP2

    (20 pages)
    Linksys - WAG54GP2 Installation CD Page 1 of 20 a This User Guide provides step-by-step instructions on how to configurethe Linksys – WAG54GP2 modem using the supplied Installation CD. Why is this task performed? Completing this task will assist you through configuring the Linksys –WAG54GP2 modem using the Linksys - WAG54GP2 Installation CD. For assistan …
  • Cassia

    X1000

    (17 pages)
    platform: Ubuntu 16.04.3 LTS device: X1000_TKR03FL language: Python Connect X1000_TKR03FL device to your Azure IoT services Table of Contents • Introduction • Prerequisites • Prepare the Device • Connect to Azure IoT Central • Integration with Azure IoT Explorer • Additional Links Introduction About this document This document descr …
  • Brother

    MFC490CW - Color Inkjet - All-in-One

    (6 pages)
    MFC490CW Vista Network Connection Repair Instructions 1 © 1995 - 2010 Brother International Corporation www.brother-usa.com Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as …
  • TP-Link

    TL-WN823N

    (21 pages)
    English······················································································· 1 български·············································································· …
  • CNET

    CWR-854

    (4 pages)
    VPN FAQ 1. What is VPN? 2. What are the features and benefits of using VPN? 3. What are the protocols used by VPN? 4. What is a Tunnel? 5. What are the components for setting up a VPN? 6. What VPN protocol is supported by CNet wireless routers? 7. What is IPSec? 8. What is PPTP? 9. What is L2TP? 10. How does VPN work? 11. What is NAT Traversal? 12. What …
  • Creative

    SOUND BLASTER RECON3D OMEGA WIRELESS -

    (1 pages)
    DECLARATION OF CONFORMITY According to the FCC96 208 and ET95-19 Manufacturer/Importer’s Name: Creative Labs, Inc. Manufacturer/Importer’s Address: 1901 McCarthy Boulevard Milpitas, CA. 95035 Tel: (408) 428-6600 declares under its sole responsibility that the product Trade Name: Creative Labs Model Numbers: SB1300, SB1310 & GH0 …

Comments, Questions and Opinions: