Kontron MSM8C104EX Operation & User’s Manual

Text of Kontron MSM8C104EX User Guide:

• Kontron MSM8C104EX, MSM8C104EX / Driver Installation & Settings www.kontron.com 22 4. Select "Install from a list or specific location (Advanced)". Select "Next." 5. Click "Search for the best driver in these locations". Choose "Select removable media (floppy, CD-ROM)" and "Include this location in the search". Type "D:\MSM8C\Drivers\Win2K-XP", where D is the drive letter of the CD ROM. Now select "Next".

• Kontron MSM8C104EX, MSM8C104EX / Introduction www.kontron.com 8 2 Introduction 2.1 MSM8C104EX Ordering Information Part / Option Part Number Description MSM8C104ex, 8 channel 801725 PCIe + PCI MSM8C104ex, 16 channel 801726 PCIe + PCI MSM8C104 cable kit 802036 4x DSUB9 (2x kit) 2.2 Understanding MSM8C104EX Functionality The MSM8C104ex MICROSPACE ® PCI/104-Express expansion card has a choice of either 8 or 16 serial interfaces available. Each channel can be singly selected as RS232C (+/-9V) or as RS422/485 each with 4 paired wires (TxD, RxD, CTS, RTS). » 8 ch. serial high speed interfac

• Kontron MSM8C104EX, MSM8C104EX / Specifications www.kontron.com 9 3 Specifications Note: All information is subject to change without notice. 3.1 Functional Specifications Bus » Standard: PC/104express » Size: 32 bit PCIe 3.2 Dimensions » Length: 90 mm » Width: 96 mm » Height: 15 mm 3.3 Electrical Specifications Power Supply » Working: 5 Volt / 1 W 3.4 Environmental Specifications Temperature » Operating, standard version: -25°C to +85°C » Operating, industrial version: -40°C to +85°C » Non-operating (storage): -55°C to +85°C Vibration » 5 to 2000 Hz Humidity » 5% to 90% (non-condensing) Shock » 10g

• Kontron MSM8C104EX, MSM8C104EX / LEDs www.kontron.com 19 6 LEDs Status Indicators The MSM8C104ex contains onboard diagnostic indicators. There are 2 different indicator types: 1. Eight yellow LEDs show the current serial port configuration. If the LED is on, the port is configured as a standard RS232C serial port. If the LED is off, the port is configured as a standard RS422/RS485 serial port. 2. The green LEDs near the PC/104-Plus connector show the presence of the core voltages needed on the board. If the LED is on, the voltage is present.

• MSM8C104EX / MSM8C104EX Connectors & Jumpers www.kontron.com 15 5.2.4 X5 PCI/104-Express Bus (Bottom View Signal Assignment) Pin Signal Signal Pin 2 PE_RST# Reserved (GPIO0) 1 4 3.3V 3.3V 3 6 USB0+ USB1+ 5 8 USB0- USB1- 7 10 GND GND 9 12 PEx1_0T+ PEx1_1T+ 11 14 PEx1_0T- PEx1_1T- 13 16 GND GND 15 18 PEx1_3T+ PEx1_2T+ 17 20 PEx1_3T- PEx

• Kontron MSM8C104EX, MSM8C104EX / Electrical Interfaces www.kontron.com 11 4 Electrical Interfaces For the 8-Channel UART with RS232 and RS422/485 4.1 RS232 Electrical Interface This is the default setting for the selectable interface of the MSM8C104ex. To operate a port in RS232 mode, there are no jumpers installed on the corresponding jumper block. 4.2 RS422/485 Electrical Interface MSM8C104ex models offer three modes of RS422/485 communication, as outlined below. 4.2.1 Full Duplex Mode TxD+/- is

• MSM8C104EX / MSM8C104EX Connectors & Jumpers www.kontron.com 18 5.3 Jumpers Settings written in bold are defaults! Jumper Structure 1-2 / open 2-3 / closed J2 JTAG connector J3 Termination Jumper for RS422/485 open = no termination closed = terminated J4 Connector for 16 channel expansion no yes J5 SIDE_DETECT 2 open bottom

• Kontron MSM8C104EX, MSM8C104EX / User Information www.kontron.com 4 1 User Information 1.1 About This Document This document provides information about products from Kontron AG and/or its subsidiaries. No warranty of suitability, purpose, or fitness is implied. While every attempt has been made to ensure that the information in this document is accurate, the information contained within is supplied "as-is" and is subject to change without notice. For the circuits, descriptions and tables indicated, Kontron assumes no responsibility as far as patents or other rights of third parties are concerned. 1.2 Copyri

• Kontron MSM8C104EX, MSM8C104EX / Driver Installation & Settings www.kontron.com 20 7 Driver Installation & Settings 7.1 Driver Installation on Windows XP The following instructions outline how to install the MSM8C104EX on a computer running Windows XP. 1. After inserting the MSM8C104EX into the PCI/104-Express slot, turn on the system. A "Found New Hardware Wizard" will appear. Insert the Driver-CD into the drive as requested. Select "Install from a list or specific location (Advanced)". Se

• MSM8C104EX / Appendix A: Architecture Information www.kontron.com 34 9.3 Ports 9.3.1 RS232 Serial » EIA232E standard » The EIA-232-E standard specifies the interface between (for example) a modem and a computer so that they can exchange data. The computer can then send data to the modem, which then sends the data over a telephone line. The data that the modem receive

• Kontron MSM8C104EX, MSM8C104EX / Driver Installation & Settings www.kontron.com 30 7.2.2 FIFOs Choose the "FIFOs" tab, located at Start / Control Panel / System / Hardware / Device Manager / Ports. The settings for the FIFO buffers can be selected here. Receive and Transmit FIFO Settings These sliders adjust the size of the UART FIFO levels used by the MSM8C104EX UART ports. More buffering can be obtained the further to the right the slider is moved. This results in higher throughput and lower load on the system. Note: High buffer levels c

• Kontron MSM8C104EX, MSM8C104EX / User Information www.kontron.com 5 1.6 Technical Support Technicians and engineers from Kontron AG and/or its subsidiaries are available for technical support. We are committed to making our products easy to use and will help you use our products in your systems. Please consult our Web site at http://www.kcc-ag.ch/index.php?id=products-download for the latest product documentation, BIOS, drivers, tools and software information. For technical support consult http://support.kcc-ag.ch/

• Kontron MSM8C104EX, MSM8C104EX / Driver Installation & Settings www.kontron.com 23 The "Found New Hardware Wizard" will begin to install the necessary software. 6. A window will appear indicating that the software for the MSM8C104EX has not passed Windows Logo testing. Select "Continue Anyway".

• Kontron MSM8C104EX, MSM8C104EX / Driver Installation & Settings www.kontron.com 26 10. A window will appear indicating that the software for the MSM8C104EX has not passed Windows Logo testing. Select "Continue Anyway". 11. The MSM8C104EX PCI/104-Express UART Port installation is complete. Select "Finish".

• Kontron MSM8C104EX, MSM8C104EX / Appendix A: Architecture Information www.kontron.com 33 9 Appendix A: Architecture Information The following sources of information can help you better understand PC architecture. 9.1 Buses 9.1.1 ISA, Standard PS/2 – Connectors » AT Bus Design: Eight and Sixteen-Bit ISA, E-ISA and EISA Design, Edward Solari, Annabooks, 1990, ISBN 0- 929392-08-6 » AT IBM Technical Reference Vol 1&2, 1985 » ISA & EISA Theory and Operation, Edward Solari, Annabooks, 1992, ISBN 09293921

• Kontron MSM8C104EX, MSM8C104EX / Driver Installation & Settings www.kontron.com 27 12. Verify the presence of the MSM8C104EX serial ports in your system by going to Start / Control Panel / System / Hardware / Device Manager. You should see MSM8C GPIO Adapter, MSM8C Multiport Serial Adapter, and Ports. 13. Double click on one of the eight MSM8C UART Ports.

• Kontron MSM8C104EX, MSM8C104EX / MSM8C104EX Connectors & Jumpers www.kontron.com 16 Pin Signal Signal Pin 106 SDVO_CLK SDVO_DAT (PENA#) 105 108 GND GND 107 110 PEx16_0R(0)+ / SDVO_TVCI+ PEx16_0R(8)+ 109 112 PEx16_0R(0)- / SDVO_TVCI- PEx16_0R(8)- 111 114 GND GND 113 116 PEx16_0R(1)+ / SDVO_INT+ PEx16_0R(9)+ 115 118 PEx16_0R(1)- / SDVO_INT- PEx16_0R(9)- 117 120 GND GND 119 122 PEx16_0R(2)+ / SDVO_STALL+ PEx16_0R(10)+ 121 124 PEx16_0R(2)- / SDVO_STALL- PEx16_0R(10)- 123 126 GND GND 125 128 PEx16_0R(3)+ PEx16_0R(11) 127 130 PEx16_0R(3)- PEx16_0R(1

• Kontron MSM8C104EX, MSM8C104EX / Appendix B: Document Revision History www.kontron.com 35 10 Appendix B: Document Revision History Revision Date Edited by Changes 100 04.Jan.2010 WAS Changed to new Kontron Corporate Design from DLAG V1.1A 101 27.Jan.2010 WAS Formatting changes to fit A4 paper. Kontron-formatted title photo. 102 23.Mar.2010 WAS Minor formatting changes to Pgs 9, 10, 16, 17, 32, 33, 39 103 02.Feb.2011 MEG/WAS Description of Jumpers 8 & 9 added / Configurations of RS422 & RS485

Related Products and Documents (PCI Card):

Comparable Devices:

Similar Resources:

• EMS Imaging XtremeLC Series (14 pages) The XtremeLC Range Dual & Single Channel Live Capture Cards User Guide Version 1.0.0 Electronic Modular Solutions Limited Leicestershire United Kingdom Tel: +44(0)116 2775730 Email: [email protected] …

• Proxim 11a/b/g (1 pages) Proxim Wireless At-a-GlanceWireless LAN Product Portfolio ORINOCO® CLIENTS ORINOCO® ACCESS POINTSProduct11a/b/g ComboCard11b/g PC Card11a/b/g PCI Adapter 11b/g USB Client Adapter AP-700 AP-4000M, AP-4000 and AP-4900MDescription The ultimate in fl exibility forconnecting to any Wi-Fi® network:802.11a, b or gWi-Fi PCI adapter for connectivityfrom a deskto …

• Lindy 51274 (11 pages) © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (February 2010) Low Profile 32-Bit PCI 4 Port Serial Card (16C950 128FIFO) User Manual English LINDY No. 51274 www.lindy.com …

• ICP DAS USA PISO-CAN-FD Series (88 pages) PISO-CANFD series CAN FD card User Manual (version 1.0.0) Page: 1 Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected] PISO-CANFD Series User Manual Version 1.0.0, Feb. 2021 Service and usage information for PISO-CAN200U-FD-D / PISO-CAN200U-FD-T PISO-CAN400U-FD-D / PISO-CAN400U-FD-T …

• Manhattan 158176 (2 pages) Parallel PCI Express Card 1 port, x1 laneModel158176PCI Express Balances Cost, Performance, Compatibility and Advanced Features for Computing Platforms.The MANHATTAN® Parallel PCI Express Card quickly and easily adds one DB25 port to PCI Express-enabled desktop systems to connect and communicate with Parallel peripheral devices. Fast Data TransferThe MANHAT …

• Exsys EX-1093-2 (2 pages) 6 5 1 ANSCHLÜSSE BESCHREIBUNG & TECHNISCHE DATEN AUFBAU Anleitung Vers. 1.0 / 09.01.19 EX-1093-2 Kompatibilität: PCI oder PCI-X, 33Mhz Betriebssysteme: Windows XP/ Vista/ 7/ 8.x/ 10/ Server 20xx Anschlüsse: 4x USB 3.1(Gen1) A-Buchse extern, 1x 4 Pin Floppy Anschluss, 1x SATA 15 Pin Anschluss Lieferumfang: EX-1093-2, Low Profile Bügel, Treiber …

Comments, Questions and Opinions: