Manualios.com

Kramer VP-461 Operation & User’s Manual

Kramer VP-461 Manual Online:

3.8, 1960 votes
Kramer VP-461 User Manual
Kramer VP-461 User Guide
Kramer VP-461 Online Manual

Text of Kramer VP-461 User Guide:

  • Kramer VP-461, 34 VP-461 - The Display Modes 6.2.3.3 Selecting the PiP Source via the OSD Menu You can select an input source only after you set the display mode to one of the PiP configurations (see Section 6.2.1). To set the PiP source via the OSD menu, do the following: 1. Press the MENU button to access the OSD menu. 2. Scroll through the menu, and for window specific submenus check the menu title:  If PiP Window Control appears, continue to step 7  If not, continue to the next step 3. Press the button to move to the Misc menu and press ENTER. 4. Select the OSD submenu and press ENTER. 5. Select Window Control and choose PiP

  • Kramer VP-461, 12 VP-461 - The OSD Menu Note that:  A selected parameter that turns gray becomes valid immediately (there is no need to press Enter to save the changes)  Exiting the menu saves the parameter to the memory  Data is saved per window and per input (to a dedicated input + window memory), as applicable The control buttons let you control the VP-461 via the OSD menu. Press the:  MENU button to enter the menu, exit the menu, and when in the OSD menu, move to the previous level and change menu settings in the OSD screen. Changes are immediate The default timeout is set to 30 seconds and can be changed (see Sectio

  • Kramer VP-461, VP-461 - The OSD Menu 11 11 The subtitle, below the title line shows the current level accessed (Scale in this example) After selecting Output (which is the second Level), it appears in the subtitle Once Master Connection is selected, the Title changes to “Entire System Control” indicating that the selection will affect the entire system. The subtitle shows the current, Level 3, selection and the menu list shows the function (PC) If the display layout includes a PiP window, you can set the OSD menu to control the main source window and the PIP window separately (by defining Window Control, see Se

  • VP-461 - The OSD Menu 19 19 4. Press the +/- buttons to move the PiP window horizontally. Use the V Position menu item in the same way to move the PiP vertically, see Figure 12. Figure 12: Moving the PiP Window Note that the sequence in which you change the size and position of the window is insignificant, as long as you make sure that the

  • Kramer VP-461, 32 VP-461 - The Display Modes 6.2.1 Activating the Dual window Mode You can activate the dual window mode (indicated by an illuminated PIP front panel button) in any of the following ways:  Press and hold (for 3 seconds) the front panel PIP button The latest PiP configuration appears  Press the PIP button on the IR remote control transmitter (see Section 7.4) The latest PiP configuration appears  Access the OSD menu, select INPUT>Display Mode, and then choose one of the preset PiP configurations (P

  • VP-461 - The OSD Menu 21 21 5.4 The Process Menu The Process menu functions are available for interlaced video processing only and not for progressive scan. Figure 15: Process Menu Setting Function Deinterlacing Set the deinterlacing method to: Line Doubler – to improve the quality of the image to some extent M/P Line doubler takes an interlaced

  • Kramer VP-461, VP-461 - The OSD Menu 25 25 Setting Function Deep Color – to Off (the default) for 8-bit color depth or to Follow Output for applying deep color automatically on the HDMI output if supported by the display. Note that Follow Output sets the Deep Color of each output independently, according to the screen connected to each output. A change in the Deep Color setting will take effect after there is a hot plug on the HDMI output or if the user selects a new output resolution. Color Space – to RGB, YPbPr422 or YPbPr444 Z

  • VP-461 - Overview 7 7 # Feature Function 1 IR Receiver Accepts IR remote commands 2 IR LED Lights orange when the unit accepts IR remote commands 3 INPUT SELECT Buttons PC 15-pin HD Press to select the computer graphics input 4 HDMI Press to select the HDMI input 5 DISPLAYPORT Press to select the DisplayPort input

  • Kramer VP-461, 16 VP-461 - The OSD Menu 5.2.1.1 Changing the Size of the Main and/or PiP Window Use the H Width and V Height to change the size of the window using the + and – buttons on the front panel or remote control transmitter (as illustrated in Figure 6). Figure 6: changing the size of the Window To change the size of the window, do the following: 1. Check that window control is set as required (for example, PiP Window Control). 2. Select Window Customization (see Figure 10). 3. Select H width (an OSD slide bar appears) and press + to increase the width, or – to decrease the width, see Figure 7

  • Kramer VP-461, VP-461 - The OSD Menu 13 13 5.2 The Input Menu Figure 4: Input Menu Setting Function Display Mode Select the display mode (see Figure 5): Single Window – single window mode operation with one channel displayed E Picture in Picture (PiP) – dual window mode operation, a smaller window superimposed over a full screen image (see Section 6.2) E Picture + Picture (PoP) – dual window mode operation, both images appear side-by-side and the aspect ratios of both images are maintained (see Section 6.2) E

  • Kramer VP-461, VP-461 - Technical Specifications 39 39 9 Technical Specifications INPUTS: 1 VGA on a 15-pin HD connector 1 HDMI (deep color) connector 1 DisplayPort connector 1 PC IN unbalanced stereo audio (1Vrms nom/100k) on a 3.5mm mini jack connector OUTPUTS: 1 PC on a 15-pin HD connector 1 HDMI (deep color) connector 1 OUT unbalanced stereo audio on a 3.5mm mini jack connector COMPLIANCE WITH HDMI STANDARD: Supports HDMI (deep color) and HDCP Supports: DisplayPort 1.1a OUTPUT RESOLUTIONS: 640x480@60, 640x480@75, 800x600@50, 800x600@60, 800x600@75, 1024x768@50, 1024x768@60, 1024x768@75, 1280x768@50, 128

  • Kramer VP-461, 6 VP-461 - Overview 3.1 HDCP Compliance If the HDMI signal is HDCP protected, it can only appear on the HDMI output if it is connected to an HDCP compliant display. The VP-461 will not output a picture on an HDMI display that is not HDCP compliant, nor will a picture be shown on the PC output; instead it will show a black screen. In the dual window display mode (see Section 6.2), even if only one of the inputs is HDCP protected, and is output to a non compliant display, it will affect the entire screen and turn it black. 3.2 Defining the VP-461 Video Scaler This se

  • Kramer VP-461, VP-461 - The OSD Menu 29 29 5.8.1 The Luma Keying Feature The luma keying feature is an easy-to-use method of compositing two video sources into a single image. By setting up a “key” image or clip on a black background, it can be merged – or overlaid – onto the primary video. The key image is transparent in the areas of its dark background, resulting in a picture which looks as if the key image is cut out and pasted over the primary image. This useful function of combining images from two di

  • VP-461 - Introduction 1 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded mo

  • Kramer VP-461, 26 VP-461 - The OSD Menu 5.7.2 Master Connection Settings The Master Connection (HDMI or PC) is usually set to the main output display so that the optimal resolution for that display can be obtained. By setting the output resolution to Native, the VP-461 is triggered to read the EDID of the main display and change the output resolution value according to the native resolution of the display. If it is not supported by the selected Master Connection, the system searches for the best supported res

  • Kramer VP-461, 48 VP-461 - The VP-461 RS-232 Communication Protocol 1st Level 2nd Level 3rd Level 4th Level Range Func. Note N\A 23 1080i100 24 1080p60 25 1080p50 26 1080p30 27 1080p23_976 28 1080p24 29 1080p25 30 N\A 31 N\A 32 640X480@60 33 N\A 34 N\A 35 N\A 36 640x480@72 37 640x480@75 38 848x480@60 39 640x480@85 40 N\A 41 800x600@56 42 800x600@60 43 N\A 44 800x600@72 45 800x600@75 46 800x600@85 47 1024x768@60 48 1360x768@60 49 1280x768@60 50 1024x768@70

  • Kramer VP-461, VP-461 - The VP-461 RS-232 Communication Protocol 49 49 1st Level 2nd Level 3rd Level 4th Level Range Func. Note OSD Window Control Main Win 0 721 When in the single window mode, only Main Win is valid PiP Win 1 H Position 0:2047 722 The value range is dynamic, FW prevents exceeding of boundaries V Position 0:2047 723 Transparency ON 1 724 OFF 0 Transparency Gain 0.1:1.6 725 Transparency Bias -400:400 726 Blink ON 1 727 OFF 0 Blink Period 0.1:1.6 728 Timeout

  • Kramer VP-461, 4 VP-461 - Overview 3 Overview The Kramer VP-461 is a high quality Video Scaler. It accepts one of three inputs: a computer graphics signal on a 15-pin HD connector, an HDMI and a DisplayPort signal. It scales the video, embeds the audio and outputs the signal to the HDMI output, as well as to the PC output together with an unbalanced audio output. The VP-461 Video Scaler features:  K-Storm™ Scaling Technology - Kramer’s extremely high performance scaling technology. High-quality 3:2 and 2:2 pull down de-interlacing and full up and down scaling of com

  • Kramer VP-461, VP-461 - Controlling the VP-461 37 37 7.4 Controlling via the Infrared Remote Control Transmitter This IR remote control transmitter is compatible with various Kramer machines, therefore not all its buttons are applicable to the VP-461. The table below defines only the buttons that are relevant to the VP-461; the functionality of the other buttons is marked N/A. Figure 21: Infrared Remote Control Transmitter Keys Function POWER Toggle the power save mode ON or OFF PIP Enter the dual window mode (the latest setting), see Section 6.2 Note that while browsing the OSD men

  • 52 VP-461 - The VP-461 RS-232 Communication Protocol Identification commands Command Syntax Response Protocol Handshaking #CR ~OK CRLF Read device model MODEL? MODEL MACHINE_MODEL Read device serial number SN? SN SERIAL_NUMBER Read device firmware version VERSION? VERSION MAJOR .MINOR .BUILD .REVISION Read device bu

  • Kramer VP-461, 22 VP-461 - The OSD Menu 5.5 The Picture Menu Figure 16: Picture Menu Setting Function Brightness Set the brightness level M/P Contrast Set the contrast level M/P Color Set the color level M/P Color Correction Set the blue, green and flesh color levels from 0 to 4 M/P Black Level Set the black level M/P Gamma Mode Set the gamma correction factor to Off, 0.4, 0.8, 1.2, 1.6, 2.0, 2.4 or 2.8 E The higher the value, the darker the image Dither Set the error diffusion E: Mode0: Disable error diffusion Mode1: In-frame 8:6 conversion Mode2: Intra-frame 8:6 convers

  • Kramer VP-461, 36 VP-461 - Controlling the VP-461 7.3 Connecting to the VP-461 via RS-232 You can connect to the VP-461 via an RS-232 connection using, for example, a PC. Note that a null-modem adapter/connection is not required. To connect to the VP-461 via RS-232, connect the RS-232 9-pin D-sub rear panel port on the VP-461 unit via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5 need to be connected) to the RS-232 9-pin D-sub port on your PC.

  • Kramer VP-461, ii VP-461 - Contents Figures Figure 1: VP-461 Video Scaler 6 Figure 2: Connecting the VP-461 Video Scaler 9 Figure 3: Audio Input Pinout 9 Figure 4: Input Menu 13 Figure 5: Select the Display Mode 15 Figure 6: changing the size of the Window 16 Figure 7: Increasing the Width 16 Figure 8: Increasing the Height 17 Figure 9: Positioning the Window 17 Figure 10: Window Customization 18 Figure 11: H-Position Slide Bar 18 Figure 12: Moving the PiP Window 19 Figure 13:

  • Kramer VP-461, 28 VP-461 - The OSD Menu Setting Function Advanced Set: V Keystone – to set the vertical keystone level E Useful If the projector is located at an angle above or below the screen. In the OSD menu the value range shows -80 to 80. For interlaced inputs, this feature is disabled Auto Sync Off – to turn the auto sync On/Off. When ON, 2 minutes after not detecting a valid video signal on the selected input (or both inputs in the dual window mode), the unit will disable the syncs and the audio on all the outputs, until a valid input is again detected or any keypad button is pressed to

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Speed Link ERGO RF KEYBOARD SL-6491 Operation & user’s manual speed-link/ergo-rf-keyboard-sl-6491-T5M.pdf 24 Feb 2024 36
2 Philips 29PT8667 Brochure & specs philips/29pt8667-2H7.pdf 01 Jun 2023 3
3 Aiwa XP-V710C Operating instructions aiwa/xp-v710c-1K9.pdf 08 Aug 2022 2 0.19 Mb
4 Kawasaki FX850 Owner's manual kawasaki/fx850-922.pdf 01 Aug 2022 90
5 Altec Lansing 1902A SIGNAL PROCESSING Manual  altec-lansing/1902a-signal-processing-U67.pdf 23 Jan 2024 19 1.21 Mb
6 Eaton ePDUG3 Troubleshooting manual eaton/epdug3-EC5.pdf 19 Nov 2023 31 2.59 Mb

Similar Resources:

  • Studer

    A812

    (23 pages)
    STUDEFI AUTOLOCATOROperating Manual/BedienungsanleitungPrepared and edited by STUDER INTERNATIONAL (a division o{ STUDER REVOX AG)TECHNICAL DOCUMENTATIONAlthardstrasse 1 0, CH-81 05 Begensdorl-ZürichWe reserve the right to make alterations.Copyright by STUDEB BEVOX AGprinted in SwiEerlandOrder No.: 10.271073 (Ed. 10.91)STUDER is a registered trade mark of …
  • Behringer

    ULTRADRIVE PRO DCX2496

    (3 pages)
    Quick Start Tips for Behringer DCX2496 from BESL Connections 1. Connect the 25’ PC Link cable from the DCX to your PC's serial comm port. Laptop users will also need a USB/DB9 adapter cable. This extra cable can be patched onto the long serial cable. 2. Connect preamp L/R cables into DCX input channels B/C respectively. Channel A is reserved for …
  • Art

    PDB

    (1 pages)
    This rock solid, roadworthy DI Box allows for the connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles. The PDB™ features switchable Input Attenuation (0 dB, -20dB, -40dB), a 50k Ohm Instrument Input, 50k Ohm Parallel Link jack, a 600 Ohm XLR Output Jack, and a switchable Ground Lift. …
  • Audioplex

    IRZ-1

    (1 pages)
    TVSGTVSGTVSGTVSGTVSGTVSGEMITTERSSTATUS(T) EMITTERSPOWER(V)123456IRZ-1IN OUTIN 1NOJUMPERSNOJUMPERSEMITTER 1EMITTER 2EMITTER 3EMITTER 4EMITTER 5EMITTER 6IRTARGETIN 2IRTARGETIN 3IRTARGETIN 4IRTARGETIN 5IRTARGETIN 6IRTARGETSimplest form: six(6) independent zones six(6) independent emitters out1 OF 6 …
  • Phonic

    DFX 2000

    (60 pages)
    DFX2000DIGITAL EFFECTS PROCESSORPROCESADOR DE EFECTOS DIGITAL数字效果处理器PROCESSADOR DIGITAL DE EFEITOSDFX2000English / Español / 简体中文 / PortuguêsUser's ManualManual del Usuario使用手册Guia do Usuário …
  • Maico

    MA 25

    (2 pages)
    8012069-3_QG_MA25_e_15a 1 / 2 06/15 MA 25 / MA 25e Quick User Guide Description The MA 25 / MA 25e is a pure tone screening audiometer. The MA 25e extends the MA 25 functionalities with Hughson Westlake automatic hearing threshold test and talk forward function. Function of buttons Power on: Press Tone Switch Attention: Power on is on …

Comments, Questions and Opinions: