Manualios.com

IRIS IRIScan Pro 3 Wifi Operation & User’s Manual

  • IRIScan Pro 3 Wifi Scanner
  • maElNCzotJa9Y
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 85

IRIS IRIScan Pro 3 Wifi Manual Online:

3.65, 1456 votes
IRIS IRIScan Pro 3 Wifi User Manual
IRIS IRIScan Pro 3 Wifi User Guide
IRIS IRIScan Pro 3 Wifi Online Manual

Text of IRIS IRIScan Pro 3 Wifi User Guide:

  • 6-10 To delete a profile, 1. From the Image tab dialog box, click “Profiles” to prompt the Edit Your Profile dialog box. 2. Choose the profile you want to delete from the dropdown list box. 3. Click “Delete”. A Confirm message “Are you sure you want to delete this profile?” is prompted. 4. Choose “Yes” to delete or “Cancel” to quit. To re

  • IRIS IRIScan Pro 3 Wifi, User Guide iii FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

  • 9-2 Wifi Specifications: Standard IEEE 802.11 b/g/n standards compliant Wireless LAN 1T1R Mode Frequency Range 2.400 ~ 2.4835GHz ( subject to local regulations) Number of Selectable Channels 802.11n: 20MHz/40MHz 802.1 1b/g: USA, Canada (FCC):11 channels (2.412GHz~2.462GHz) Europe (CE): 13 channels (2.412GHz~2.472GHz) Ja

  • IRIS IRIScan Pro 3 Wifi, 6-20 Background Setting This option allows you to set your scan background. Choice: White Background, Black Background. Note: For a sheet-fed scanner with an auto document feeder, this option is currently available only in the “Auto crop” mode. For a scanner with a flatbed platen, this option is available either in the “Auto crop” or the “Fixed to Transport” mode. White Background Black Background

  • IRIS IRIScan Pro 3 Wifi, 6-18 6.6 The Preview Tab The Preview tab allows you to preview (a low-resolution scan) your image before final scan. This preview image lets you allocate your scan area. You can choose your scan area by the “Scan Area” drop down list box or placing your cursor on the Display window and dragging it diagonally on the Display window. Then, a red rectangle box will appear to indicate the selected area. Note: If you choose “Automatic Cropping” on the “Paper Tab”, then to select a scan area on the Preview tab is not allowed. The Preview Tab The

  • IRIS IRIScan Pro 3 Wifi, viii 5. Access the scanned images through Wifi (SD Mode) ............... 5-1 5.1 Access the Scanned Image through Wifi ............................................... 5-1 5.2 Use Options under Image Thumbnails .................................................. 5-3 5.3 Reset Login Settings .......................................................................... 5-5 5.4 Exit the Wifi Mode .............................................................................. 5-5 6. Enhance Your Images with the Scanner Properties Dialog Box (PC Mode) ..................................................

  • IRIS IRIScan Pro 3 Wifi, 4-2 5. Click Scanner Model. 6. Select IRIScan Pro 3 Wifi. You can now configure the scanner settings in the Readiris dialog box. 7. Or select IRIScan Pro 3 Wifi (User Interface). In that case the Scanner Properties dialog box opens before scanning. In that window you can configure advanced scanner settings. Also see the section 4.4 A Glance at the Scanner Properties Dialog box for more information. 8. Click Ok to close the scanner settings. 9. Then click Scan to scan your documents. For more information on how to scan and process documents in Readiris, see the User Guide on www.irislink.com. 4.3 Scan Documents w

  • IRIS IRIScan Pro 3 Wifi, User Guide 8-5 Wifi Mode: Q: Why can’t I see the Scanner’s Wifi Network ID [SSID]? A: Make sure you have pressed the [Wifi] button and the Wifi icon is displayed on the LCD screen. If Wifi Access Point is still in countdown mode, wait until the blue Wifi indicator light turned solidly on. Q: Will the battery power get used up faster when Wifi mode is on? A: Yes. When Wifi mode is on, the scanner does not time-out and automatically turn off like it does normally. Therefore, it is recommended to turn off the Wifi mode when images have

  • IRIS IRIScan Pro 3 Wifi, User Guide 4-3 The following procedure describes how to start a simple scan. If there is an error, please review the preceding section to check if the cable connection and scanner driver have been successfully installed. Before you begin, be sure the scanner is on. 1. Select Start>Programs>IRIS IRIScan Pro Wifi Scanner>Capture Tool. The Select Scanner Model dialog box will be displayed. 2. Select your driver type and scanner model and click OK. The following Capture Tool dialog box will be displayed. 3. Choose your desired file format from the File Format drop down li

  • IRIS IRIScan Pro 3 Wifi, 6-14 Relative to Document This option allows you to crop different areas on your documents and deliver these images in B&W, Gray, or Color separately. For example, there are applications which require you to store the entire document in B&W and a part of the document in color to save storage space. This is useful for documents where a photograph or signature appears in a consistent area on the document such as resumes, and so on. The following options are only available when Fixed to Transport is selected.  X-Offse

  • User Guide 6-9 6.2.6 Editing Profiles The Scanner Properties dialog box allows you to change and save your frequently used scan settings into a profile. You can edit these profiles by renaming or deleting them. To add a new profile, 1. Customize your settings. (For example, change your resolution, image type, cropping method, scan size, or other scan settings.) 2. Click

  • IRIS IRIScan Pro 3 Wifi, 6-6 Brightness Adjusts the lightness or darkness of an image. The higher the value, the brighter the image. Drag the slider to the right or left to increase or decrease the brightness. The range is from –100 to +100. Contrast Adjusts the range between the darkest and the lightest shades in the image. The higher the contrast, the bigger the different grayscale. Drag the slider to the right or left to increase or decrease the contrast. The range is from –100 to +100. Brightness: -50 Brightness: 0 (Norma

  • User Guide 2-1 2. Installation 2.1 Precautions  Keep the product out of direct sunlight. Direct exposure to the sun or excessive heat may cause damage to the unit.  Do not install the product in a humid or dusty place.  Place the product securely on an even, flat surface. Tilted or uneven surfaces may cause mechanical or paper-feedi

  • IRIS IRIScan Pro 3 Wifi, User Guide 8-1 8. Troubleshooting 8.1 Clear a paper jam In the event of a paper jam, follow the procedures below to remove the paper: 1. Gently open the feeder cover. 2. Carefully pull the paper out of the feed tray. 3. Close the feeder cover. Your Scanner is now ready to use.

  • IRIS IRIScan Pro 3 Wifi, User Guide v Warning and Precautions of the lithium-ion battery Warning: Danger warning to prevent the possibility of the battery from leaking, heating, explosion, please observe the following precautions:  Don’t immerse the battery in water and seawater. Please put it in cool and dry environment if no using.  Do not discard or leave the battery near a heat source as fire or heater  Being charged, using the battery charger specifically for that purpose  Don’t reverse the positive and negative terminals  Don’t connect the battery to an electrical outl

  • IRIS IRIScan Pro 3 Wifi, 6-12 6.4 The Color Dropout Tab 6.4.1 Color Dropout Selection Color Dropout tab allows you to drop either of the red, blue, or green color in your scanned image. If your image contains red color watermark or background, choose the R (Red) channel then any red watermark or background will be removed. This feature is used to sharpen your text when using OCR (Optical Character Recognition) software. Note that this function supports only black & white and gray images. Therefore, be sure to

  • IRIS IRIScan Pro 3 Wifi, User Guide 3-1 3. Operation in Easy (SD) Mode 3.1 Power on the Scanner Turn the Power Switch to the [ON] position to turn on the scanner. The LED indicator light will be lit and the default scan settings will be displayed on the LCD screen. 3.2 Switch to the SD Mode To start easy scan (SD mode) to save your images to the system’s built-in memory or your SD card, make sure your scanner is in the following SD (Scan to SD) mode. The SD mode is also a default mode when the scanner is turned on:

Related Products and Documents (Scanner):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Navigon MN4 Operation & user’s manual navigon/mn4-5DQ.pdf 13 Oct 2023 76
2 GE A835 Specifications ge/a835-68A.pdf 10 Oct 2023 2 0.36 Mb
3 StarTech.com UNI3510U2E Instruction manual startech-com/uni3510u2e-FXT.pdf 05 Mar 2023 14 1.17 Mb
4 Vax V-303 Wash "N' Dry Instruction manual vax/v-303-wash-n-dry-3AG.pdf 19 Apr 2023 6
5 HP Carrier-grade cc2300 Operation & user’s manual hp/carrier-grade-cc2300-N8X.pdf 22 Dec 2023 10 0.1 Mb
6 Pitney Bowes GDI Printing System Operation & user’s manual pitney-bowes/gdi-printing-system-4LW.pdf 20 May 2023 24

Similar Resources:

  • Socket

    CHS 7Ci

    (66 pages)
    © Socket Mobile, Inc. Command Barcodes for CHS 7Ci, 7Di, 7DiRx 1 COMMAND BARCODES BLUETOOTH® CORDLESS HAND SCANNER (CHS) 1D Imager models — 7Ci, 7Di, 7DiRx This document pertains to the following CHS models: • 7Ci SKU# CX2870-1409 (P/N 8550-00062) • 7Di SKU# CX2877-1472 (P/N 8550-00065) • 7DiRx SKU# CX2879-1474 (P/N 8550-00066) The …
  • Epson

    B11B184051 - Perfection V100 PHOTO

    (4 pages)
    4105579 Rev.01-F C4105579 Rev.01-F M4105579 Rev.01-F Y4105579 Rev.01-F KStart HereUnpackInstall softwareDo not connect the USB cable yet.3Remove protective tapePlug the AC adapter into an electrical outlet to turn the scanner on.Connect and plug in12Film holderScan a photo4 5 6EPSON Scan opens and scans your photo in Full Auto Mode. Wait for your sca …
  • Roland

    Picza LPX-600

    (64 pages)
    LPX-600User’s ManualThank you very much for purchasing this product. To ensure correct and safe usage with a full understanding of this product’s performance, please be sure to read through this manual completely and store it in a safe location. Unauthorized copying or transferral, in whole or in part, of this manual is prohibited. The contents …
  • GFC

    PUPILLO A3200

    (28 pages)
    Manuale di Istruzione, Uso e ManutenzioneCod. man A3200 Rev. 1/2007 Pag. 1 di 7IL PRESENTE MANUALE E' PROPRIETA' INTELLETTUALE DELLA OGNI RIPRODUZIONE ANCHE PARZIALE E' VIETATACOMANDI / CONTROLS / COMMANDES /STEUERUNG / MANDOS11Interruttore generaleMaster switchInterrupteur généralHauptschalteInterruptor general2Presa retePower socketPrise r …
  • Infinite Peripherals

    PP-55

    (39 pages)
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . Infinite Peripherals, Inc. www.ipcprint.com PP-55 Resident Command Set Version 1.01 PP-55Resident Command Set …
  • Vishay

    7000

    (142 pages)
    Vishay Micro-Measurements P. O. Box 27777, Raleigh, North Carolina, 27611, USA Phone (919) 365-3800 Fax (919) 365-3945 www.vishay.com System 7000 Scanner Programmer’s Reference Manual Version 1.01 130-000197 Document Number: 49897 …

Comments, Questions and Opinions: