HP XP-P4IM533GV Operation & User’s Manual

Text of HP XP-P4IM533GV User Guide:

• HP XP-P4IM533GV, Motherboard XP-P4IM533GV May 11, 2004 May 11, 2004 XP-P4IM533GV Motherboard Copyright Declaration ©2004 Gigatrend Technology Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without express permission from Gigatrend Technology. Companies and product names mentioned in this document are trademarks or registered trademarks of their respective owners. Legal Disclaimer The information and content of this document is provided "as is", without warranty of any kind, express or implied, including but n

• HP XP-P4IM533GV, Contents Motherboard Layout ..........................................................................4 1. Production Introduction ...............................................................5 1.1. Feature Summary ........................................................................... 5 1.2. I/O Back Panel and Connectors&Jumper Setting ............................ 6 1.2.1. I/O Back Panel .................................................................................... 6 1.2.2. Connectors&Jumper Setting ............

• HP XP-P4IM533GV, 4 English Motherboard Layout KB_MS COMA SOCKET 478 ATX LPT USB LAN FDD F_PANEL F_USB1 PWR_LED BAT1 ICH4 PCI1 PCI2 PCI3 CODEC IT8712 BIOS XP-P4IM533GV CPU_FAN VGA CD_IN ATX_12V Intel 845GV IDE2 DDR1 IDE1 AUDIO DDR2 AGU SYS_FAN R_USB CODEC F_AUDIO

• HP XP-P4IM533GV, English 5 CPU Socket 478 for Intel ® Pentium ® 4 (Northwood) with HT Technology Intel ® Pentium ® 4 400/533MHz FSB 2nd cache depends on CPU Chipset North Bridge: Intel ® 845GV South Bridge: Intel ® ICH4 Memory 2 184-pin DDR DIMM sockets, supports up to 2GB DRAM (Max) Supports DDR333*/DDR266 DIMM Supports only 2.5V DDR SDRAM Slots 1 AGU slot device support 3 PCI slots support 33MHz & PCI 2.2 compliant On-Board IDE 2 IDE controller provide IDE HDD/CD-ROM(IDE1, IDE2) with PIO, Bus Master (Ultra DMA33/ATA66/ATA100) operation modes Can connect up to 4 IDE devices On-Board Floppy 1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M and 2.88M bytes

• HP XP-P4IM533GV, 6 English 1.2. I/O Back Panel and Connectors&Jumper Setting 1.2.2. Connectors&Jumper Setting FDD (Floppy Disk Drive Connector) The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one edge of the FDD cable is marked in red, please attach this marked edge to position 1 on the connector. IDE1 / IDE2 (IDE1 and IDE2 Connector) The IDE connector is able to connect two IDE devices via an IDE cable and requires checking of the IDE jumper setting. It is recommended that the hard drive be connected to the first IDE connector while the optical drive be connected to the second IDE connector

• HP XP-P4IM533GV, English 7 CPU_FAN (CPU Fan Power Connector); SYS_FAN (System Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin power connector and possesses a ful-proof connection design. Most coolers are designed with color-coded power connector wires. A red power connector wire indi- cates a positive connection and requires a +12V power voltage. The black connector wire is the ground wire (GND). Please remember to connect the power to the cooler to prevent system overheating and failure. Caution! Please remember to connect the power to the CPU fan to prev

• 8 English F_AUDIO (Front Audio Connector) Connects to the audio connector located on the front panel of the system casing (dependent on case design). When use of the front panel audio connector is required, please remove the 5-6 pin, 9-10pin jumper. Please note that use of only the front panel audio connector or the rear panel audio connector is permitted. CD_I

• HP XP-P4IM533GV, English 9 2. Hardware Installation 2.1. Installation of a Pentium 4 CPU and Fan Sink 1. Please make sure that the CPU used is supported by your motherboard. 2. Please be aware of the placement position of the CPU. If the CPU does not insert properly, do not apply force but check the placement position. 3. Please make sure that an even layer of heat sink paste is added between the CPU and the fan sink. 4. Please do not turn on the power prior to installing the fan sink. Doing so can result in overheating and lead to permanent damage to the CP

• HP XP-P4IM533GV, 10 English 4 Connect the 3-pin cooler power connector to the CPU Fan connector located on the motherboard. 2.2. Installation of Memory 1. Before installing or removing memory, please make sure that the computer power is turned off to prevent hardware damage. 2. Please make sure that the memory used is supported by the motherboard. 3. Memory modules have a foolproof insertion design. The memory can be in stalled only when facing the correct position. If you cannot insert the module, please switch directions. 4. It is recommended that memory of simi

• HP XP-P4IM533GV, English 11 2.4.1. Graphics Card Support List (The items below are all supported under the Windows XP operating system. When using an add-on graphics card, please first delete the onboard graphics driver before installing the driver for the add-on graphics card.) Graphics Chip Maker Model Name Nvidia Gigabyte GA-620 Gigabyte GA-622 Gigabyte GA-660 Plus Gigabyte GA-GF2560 Figure 1-1. 4X AGP Card To be continued... 2.4. What is Axper's A.G.U.? Axper's Advanced Graphics Upgrade (A.G.U.) is a unique feature on 845GV motherboards t

• 12 English Graphics Chip Maker Model Name Nvidia ASUS V9180TD ASUS V9480-TVD ASUS V9520 MSI MX440-VTD8X MS-8888 MSI Ti4600-TD-8X Leadtek WinFast A280LE TD Leadtek WinFast A310 TD Albatron NVIDIA 5950 ATi Gigabyte GV-R9700 Pro Gigabyte GV-R9700 Gigabyte GV-R9500 Gigabyte GV-R9200C3 Gigabyte GV-R98P128D Gigabyte GV-R92P128VH SiS Triplex Xabre Pro Power Color Xabre 600 Pro Figure 2. 8X AGP Card

• HP XP-P4IM533GV, English 13 3. BIOS Setup BIOS (Basic Input and Output System) stores all the information of the motherboard settings that is needed for system initiation within the CMOS. The CMOS SETUP utility allows the user to make changes in BIOS configurations that are required or to activate certain features. The CMOS SETUP saves each item configuration in the CMOS SRAM of the motherboard. When the power is turned off, the battery on the motherboard supplies the required power to the CMOS SRAM. When the power is turned on, pushing the <Del> button during the BIOS POST (Power-On Self Test) will bring up the CMOS SETUP screen. If you wish to e

• HP XP-P4IM533GV, 14 English <F6> Gives the list of options available for each item <F7> Return to Optimized default values (not applicable to main setup screen) <F8> Enters Expert-Flash feature <F9> Displays system information <F10> Saves settings and exits setup 3.2. Standard CMOS Features ø Includes the settings for items such as date, time, floppy disk drive specifications, and hard drives connected to the IDE interface. nn nn n Date (mm:dd:yy) Allows you to setup the date in the mm:dd:yy fashion. nn nn n Time (hh:mm:ss) Allows you to set up the date in the hh:mm:ss fashion. The time must be entered i

• HP XP-P4IM533GV, English 15 nn nn n Floppy 3 Mode Support Allows user to configure a Japanese standard 3 Mode floppy drive. Options: Disabled (No 3 Mode drive installed) Drive A (3 Mode Drive installed in A:) Drive B (3 Mode Drive installed in B:) Both (3 Mode Drive installed in A: and B:) nn nn n Halt on Tells the BIOS specifically which types of errors will halt the computer during the power- on self test (POST) section of the boot. Options: No Errors (Never halt when an error is detected) All Errors (Halt whenever an error is detected) All, But Keyboard (Halt whenever an error is detected with the exception of the keyboard) All, But Diskette (Halt whenever an error is

• HP XP-P4IM533GV, 16 English " # " If the installed CPU is an Intel Pentium 4 CPU supporting Hyper-Threading Technology, the system will automatically provide this option. 3.3. Advanced BIOS Features ø Allows the configuration of advanced settings such as boot sequence, password check, etc. nn nn n First / Second / Third Boot Device The user can select the order in which the system will boot. Options: Floppy, LS120,HDD-0~HDD3, SCSI, CDROM, ZIP,USB-FDD, USB-ZIP, USB- CDROM, USB-HDD, LAN, Disabled nn nn n Boot Up Floppy Seek This feature controls whether the BIOS checks for a floppy drive while booting up. (default:Disabled) nn nn n Password Check Allows user to set a password. To remove the

• HP XP-P4IM533GV, English 17 3.4. Integrated Peripherals ø This menu allows you to control the various ports of the computer such as IDE, SATA, USB, IEEE1394, COM port, LPT port, AC97 audio, etc. nn nn n On-Chip Primary PCI IDE Allows the user to enable or disable the first onboard IDE channel. (default:Enabled) nn nn n On-Chip Secondary PCI IDE Allows the user to enable or disable the second onboard IDE channel. (default:Enabled) nn nn n IDE1 Conductor Cable Allows user to select the type of IDE1 conductor cable. P

• 18 English nn nn n USB Controller Allows the user to enable or disable the onboard USB2.0 controller. (default:Enabled) nn nn n USB Keyboard Support Allows user to use a USB-based keyboard (Enable if you are using a USB keyboard, otherwise Disable) (default:Disabled) nn nn n USB Mouse Support Allows user to use a USB-based mouse (Enable if you are using a USB mouse, otherwise

• HP XP-P4IM533GV, English 19 3.5. Power Management Setup ø This is used to control the various power saving features of the PC. nn nn n ACPI Suspend Type Allows user to select the Advanced Configuration and Power Interface(ACPI) as S1/ POS (Power On Suspend) or S3/STR(Suspend To RAM) (default:S1/POS) nn nn n Soft-off by PWR-BTTN Controls whether the PC shuts off immediately after hitting the power button or delaying a few seconds. (default:Instant-off) Options: Instant-off (PC shuts off immediately) Delay 4 Sec. (PC shuts off after a 4sec. delay) nn nn n PME Event Wake Up Allows user to select the Power Management Event (PME) wake up f

• HP XP-P4IM533GV, 20 English 3.6. PnP/PCI Configuration ø This menu allows you to configure your PCI slots. You can assign IRQ's for various PCI slots. nn nn n PCI 1 IRQ Assignment Allows you to assign an IRQ for the first PCI slot. Options: Auto,3,4,5,7,9,10,11,12,14, 15 (default:Auto) nn nn n PCI 2 IRQ Assignment Allows you to assign an IRQ for the second PCI slot. Options: Auto,3,4,5,7,9,10,11,12, 14,15 (default:Auto) nn nn n PCI 3 IRQ Assignment Allows you to assign an IRQ for the third PCI slot. Options: Auto,3,4,5,7,9,10,11,12,14, 15 (default:Auto) nn nn n KB Po

• HP XP-P4IM533GV, English 21 3.7. PC Health Status ø This menu displays the current CPU temperature, the fan speeds, voltages etc. nn nn n Current Voltage(V) Vcore / DDR25V / +3.3V / +12V Automatically checks system voltage nn nn n Current CPU Temperature Automatically checks CPU temperature nn nn n Current CPU / SYSTEM FAN Speed (RPM) Automatically checks CPU/SYSTEM fan speed CMOS Setup Utility-Copyright (C) 1984-2004 Award Software PC Health Status Vcore 1.54V DDR25V 2.544V +3.3V 3.360V +12V 11.92V Current CPU Temperature 45°C Current CPU FAN Speed 4440 RPM Current SYSTEM FAN Speed 0 RPM higf: Move Enter: Select +/-/

• 22 English 3.8. Frequency/Voltage Control ø This allows user to configure CPU frequency and voltage settings. ø This section is very dangerous for inexperienced users, and therefore it is not recom mended that these settings be altered. An incorrect setting can result in system instability, corrupt data, or permanent hardware damage. nn nn n CPU Clock Ratio A

• HP XP-P4IM533GV, English 23 nn nn n Host/DRAM Clock Ratio Allows the user to set the Host/DRAM Clock Ratio. If the FSB(Front Side Bus) is at 400MHz. 2.66 Memory Frequency = Host clock x 2.66. Auto Automatically sets memory frequency. (default:Auto) If the FSB(Front Side Bus) is at 533MHz. 2.0 Memory Frequency = Host clock x 2.0. 2.5 Memory Frequency = Host clock x 2.5. Auto Automatically sets memory frequency. (default:Auto) nn nn n Memory Frequency (Mhz) The memory frequency is based on the CPU Host Frequency (Mhz) setting.

• 24 English 3.9. Top Performance ø "Top Performance" allows faster system start. However, the result may differ depending on system specifications (includes hardware and OS). For example, certain hardware may become unstable under Windows XP but work reliably under the Windows NT operating system. Thus, select Disabled under "Top Performance" if system hardware is affected

• HP XP-P4IM533GV, English 25 4. Driver Installation Driver installation for the Windows 98/98SE/200/ME/XP operating systems is simple. Once you insert the provided driver disks into your optical drive, the AUTORUN screen will appear. If this screen does not appear, you can use "D:\setup.exe" (with "D" being the specified drive) to bring up the screen shown below. Just follow the screen instructions to easily complete driver installation. Open User Manual Display system information Open Readme File Browse CD Contact Us axper Install -Displays required driver ins

Related Products and Documents (Motherboard):

Comparable Devices:

Similar Resources:

• ASROCK B560 Steel Legend (194 pages) Version 1.0 Published January 2021 Copyright©2021 ASRock INC. All rights reserved.Copyright Notice:No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.Products and c …

• HP Superdome SX1000 (23 pages) HP Integrity Servers with Microsoft®Windows Server™ 2008 for Itanium-basedSystemsRecovering Windows Server 2008 on HPIntegrity ServersHP Part Number: 5992-4472Published: April 2008 …

• MSI B450-A PRO (96 pages) 1Quick StartDDR4 MemoryGraphics CardSATA Hard Disk DriveSATA DVD DrivePhillips ScrewdriverChassisPower Supply UnitA Package of ScrewsThermal PasteQuick StartThank you for purchasing the MSI® B450-A PRO motherboard. This Quick Start section provides demonstration diagrams about how to install your computer. Some of the installations also provide video demons …

• Texas Instruments bq76940 (34 pages) User's GuideSLVU924B–March 2014–Revised April 2014bq76920 Evaluation Module User's GuideThe bq76920EVM evaluation module (EVM) is a complete evaluation system for the bq76920, a 3-cell to5-cell Li-Ion battery analog front end (AFE) integrated circuit. The EVM consists of a bq76920 circuitmodule which is used for simple evaluation of the bq76920 …

• Freetech P5F76 (57 pages)          !"# $! $! $! % % � …

• Abit AN9 32X (56 pages) Introduction Motherboard AMD Socket AM2 User’s Manual Hardware Setup BIOS Setup Driver & Utility CD Appendix For more information: www.abit.com.tw  AMD Socket AM2 ATX Motherboard  NB: NVIDIA C51XE  SB: NVIDIA MCP55PXE  2GHz HT  Dual DDR2 800 DIMM Slots  NVIDIA SLI Technology  Dual PCI-E X16 Slots  Dual GbE LAN  IEE …

Comments, Questions and Opinions: