Manualios.com

Huawei e589 Getting To Know Manual

Huawei e589 Manual Online:

3.3, 2601 votes
Huawei e589 User Manual
Huawei e589 User Guide
Huawei e589 Online Manual

Text of Huawei e589 User Guide:

  • Huawei e589, 1 Thank you for choosing Huwei E589 4G Mobile WiFi This guide briefly describes the functions of your Huawei E589 4G Mobile WiFi. For more details, see help on the web management page. See” Accessing the Web Management Page” on page 13. Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.

  • Huawei e589, 2 Getting to Know Huawei E589 4G Mobile WiFi Connection Scenario Any WiFi device can be connected to the Internet through your Huawei E589 4G Mobile WiFi. You can connect up to 10 different devices. The actual connection procedure depends on the operating system of the WiFi device. The connection scenario illustrated here is for your reference.

  • Huawei e589, 3 Getting to know your Huawei E589 4G Mobile WiFi No. Item 1 Screen 2 WPS button  Press it twice consecutively to display the SSID and wireless network key.  Press and hold it until a WPS activation animation is displayed to enable the WPS function. 3 Power/Wi-Fi button 4 SIM card slot 5 Strap hole 6 USB port 7 Reset button 8 microSD card slot 1 2 3 4 5 6 7 8

  • Huawei e589, 4 Screen No. Item 1 Signal strength 2 Network 3  Wi-Fi enabled  Number of devices connected 4 Internet connection status 5  New messages  Number of new messages 6 Battery level 7 International roaming state 8  Traffic data  Connection duration 9  A: Auto mode  M: Manual mode 1 2 3 4 5 6 R 8 7 0 00:00 B A 9 4G

  • 5 Note:  WiFi: Wireless Fidelity  WPS: WiFi Protected Setup  Traffic statistics are for your reference only. To obtain the actual traffic data, contact your service provider. SSID and Wireless Network Key To connect a WiFi device to your Mobile WiFi, an SSID and a wireless network key are required. The default SSID and wireless network key can

  • Huawei e589, 6 Before You Start Inserting the SIM Card Caution: Do not use any SIM card that is not standard or is incompatible with the Mobile WiFi. Otherwise, the Mobile WiFi may be damaged. Insert the SIM card in the card slot. Be sure that the SIM card is facing in the right direction, as shown in the following picture , and then slide the SIM card into the slot.

  • 7 Inserting the micro SD Card Insert the micro SD card into the Mobile WiFi, as shown in the picture below. Note:  The microSD card is an optional accessory. You may purchase one yourself to enhance data memory.  To remove the microSD or SIM card, press in the card gently. The microSD or SIM card will pop out for removal.  Do not remove the m

  • Huawei e589, 8 Charging the Battery Charge your Mobile WiFi the first time you use it or if it has not been used for a long time. Method 1: Using the charger Caution:  Only use the charger provided with your Mobile WiFi device. Use of an incompatible charger or one from an unknown manufacturer may cause the Mobile WiFi to malfunction, fail, or could even cause a fire. Such use voids all warranties, whether expressed or implied, on the product.

  • Huawei e589, 10 Accessing the Internet via Wi-Fi Connection By default, management parameters are preset on the Mobile WiFi according to the requirements of the service provider. Follow the steps below to quickly access the Internet. For details on how to set management parameters, see help on the web management page. Step1: Power on the Mobile WiFi Press and hold until the screen lights up. The Mobile WiFi is powered on. Note: Press and hold to power off the Mobile WiFi.

  • 11 Step2: Establish a WiFi Connection Make sure that the WiFi is enabled 1. Select Start > Control Panel > Network Connections > Wireless Network Connection. Note: To set up a WiFi connection, the PC must have a wireless network adapter installed. If Wireless Network Connection is displayed, a wireless network adapter is available. Otherwise, check to

  • Huawei e589, 12 Step3: Access the Internet After you establish a WiFi connection successfully, you can access the Internet using the following modes. Caution: Please select a proper Internet connection mode based on your service expense. For example, if you are subscribed to the time-based network service, you are recommended to select Manual mode. For details about the service expense, consult your service provider. Mode Operations Auto After the Mobile WiFi is powered on, it will connect to the Internet automatically. If there is no data tr

  • Huawei e589, 13 Note:  Launch the web management page to select the mode for accessing the Internet.  You can choose whether to enable the Mobile WiFi to connect to the Internet automatically even while you are roaming. If this function is disabled, the Mobile WiFi automatically disconnects from the Internet while you are roaming. To access the Internet, set up a connection manually. Accessing the Web Management Page 1. Make sure that the connection between the Mobile WiFi and the client is pro

  • Huawei e589, 14 Daily Use Power Saving Mode If no operation is performed on the Mobile WiFi within a preset period, the screen turns off. Press any key to light up the screen. If the Mobile WiFi is powered by the battery only, choose whether to enable the Mobile WiFi to turn off WiFi automatically. If this function is enabled and no WiFi devices access the Mobile WiFi for a preset period, the Mobile WiFi turns off WiFi automatically. You can press any key to turn WiFi on again. Validating the PIN Code If PIN code protection is enabled, log in to the web management page and follo

  • Huawei e589, 15 Establishing a WPS Connection If a WiFi client connected to the Mobile WiFi supports the WPS function, a wireless network key will be automatically generated without manual input. To establish a WPS connection, perform the following steps: 1. Power on the Mobile WiFi. 2. Start the client. 3. Enable the WPS function of the Mobile WiFi. Note: After WiFi is enabled, press and hold until a WPS activation animation is displayed on the screen to enable the WPS function of the Mobile WiFi. 4. Enable the WPS function of the client. Note: For WPS operations on the client, see the user guide of the client.

  • Huawei e589, 16 Restoring Factory Defaults If you forget the changes you have made to some parameters, you may restore factory defaults and reconfigure the Mobile WiFi. To restore the factory defaults, press and hold the RESET button until the screen turns off. All factory default settings are successfully restored. Note: Restoring factory defaults deletes all personal configuration settings and restores all web-based management settings and parameters to their default values.

  • Huawei e589, 17 Example 1: Wi-Fi Connection to Game Machine (Sony PSP) 1. Turn on the PSP WLAN switch. 2. Select “Settings > Network Settings”. 3. Select “Infrastructure Mode” to connect to your local Wi-Fi access point. 4. Select “New Connection” to specify an easy to remember connection name. 5. Select “Scan” to detect all networks within range. The access point list is displayed. 6. Select a network indicated by the SSID of the Mobile WiFi. First press the “►“ button of your game machine to confirm the SSID and then press it again to input the wireless network key.

  • Huawei e589, 18 Note: Press twice consecutively to display the current SSID and wireless network key on the screen. 7. Press the “►“ button of your game machine to continue, and then press the “X” button to save the settings. 8. Select “Test Connection“ to check the connection. 9. Go to “Internet Browser”.

  • 19 Example 2: WiFi Connection to a Smart Phone (iPhone) 1. Select “Settings > WiFi”, and then turn on WiFi. 2. Automatically detect the networks in range and display the access point list. 3. Select a network indicated by the SSID of the Mobile WiFi. 4. If necessary, enter a password and tap “Join”. (Networks requiring a password appear with a lock

  • Huawei e589, 20 Tips If the Mobile WiFi is placed in an environment with poor ventilation, it may overheat after extended use. When the Mobile WiFi overheats, it will switch off and disconnect from the network automatically to protect itself. If this happens, place the Mobile WiFi in a well-ventilated location, then restart the Mobile WiFi. If you are experiencing difficulties using the Mobile WiFi, try the following:  See help on the web management page.  Restart the Mobile WiFi.  Restore the factory defaults.  Contact your service provider.

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sharp DV-NC100X Service manual sharp/dv-nc100x-393.pdf 30 Apr 2023 117
2 Becker Traffic Pro 4720 Operating manual becker/traffic-pro-4720-94K.pdf 25 Dec 2022 73 3.51 Mb
3 Fritz Gegauf Bernina artista 630 Service manual fritz-gegauf/bernina-artista-630-82H.pdf 16 Jun 2023 105
4 Hoover U6634900 - Self Propelled WindTunnel Bagless Upright Vacuum Owner's manual hoover/u6634900-self-propelled-windtunnel-bagless-upright-vacuum-318.pdf 21 Feb 2024 36 0.62 Mb
5 Kodak Photo Printer 6850 Operation & user’s manual kodak/photo-printer-6850-L86.pdf 28 Nov 2023 64
6 Panasonic TXL32E30B Operating instructions manual panasonic/txl32e30b-QWE.pdf 05 Jan 2024 108 6.75 Mb

Similar Resources:

  • D-Link

    DCS-1000

    (4 pages)
    Using the DCS-1000/DCS-1000W IP Camera as a Security System D-Link’s IP Camera System is one of the most cost effect security solutions today. Both the DCS-1000 Wired model and DCS-1000W Wired/Wireless model have input/output controls for interfacing with security systems. On the back of the Camera you will find an 8-position connector. This connector h …
  • Verbatim

    MediaShare

    (13 pages)
    User Manual for Kindle Fire 2 Table of ContentsTABLE OF CONTENTS .............................................. 2!ABOUT THIS MANUAL .............................................. 3!PRODUCT OVERVIEW ............................................... 3!PRODUCT FEATURES ................................................. 3!OPERATING MODES ...................... …
  • Sierra Wireless

    AirCard 595

    (3 pages)
    Quick Start GuideThis document describes how to install and use the AirCard 595 PC Card on a PowerBook® G4 computer. If you require technical support, please contact Sierra Wireless.To use your AirCard 595 PC Card, you'll need:• If your card has not been activated: a Windows-based PC, to activate your card before you use it in your PowerBook G4 comp …
  • ZyXEL Communications

    P-870HW-51A V2

    (2 pages)
    VDSL2 Wireless Gatewayp870hw-51a/b v2VDSL2 High Speed and High Performance for Triple PlayP-870HW-51A/B v2 provides up to 100/45 (DS/US) Mbps data rate. VDSL2 can provide higher bandwidth, better efficiency and performance for service providers who plan to roll out multi-services. P-870HW-51A/B v2 takes the advantages of the existing copper line to provide …
  • Unitronics

    UCR-ST-B5

    (5 pages)
    Unitronics 1 UCR-ST-B5 Router The Unitronics UCR-B5 enable Unitronics PLC products to communicate via mobile networks (4G). Highlights: 1. 1 Ethernet LAN port and 1 WAN (configurable can act as LAN) 2. Wireless LAN access point or client to existing network. 3. Embedded send / receive SMS messages directly from UniStream PLCs. 4. I/O: a. 1 Digital In …
  • H3C

    MSR810

    (64 pages)
    H3C MSR 810 Routers Compliance andSafety ManualCompliance and Safety ManualСəйкестік жəне қауіпсіздік ережелеріжөнінде нұсқаулықРуководство по соблюдению требований ибезопасностиПосібник із техніки безпеки та нормативнихвимо …

Comments, Questions and Opinions: