Concept Pro VHSDIR-870EXT-IP Operation & User’s Manual

Text of Concept Pro VHSDIR-870EXT-IP User Guide:

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual Issue V1.1 60 The Group page (Privilege > Group) allows you to manage permissions for user groups. Users obtain permissions from their group. The Administrators group contains all permissions and cannot be deleted or edited. To add a user group: • Click Add. The Add Group menu appears. NOTE: If the Add Group menu does not appear, disable any popup bl ock er s. • Enter a name for the user group and click OK. To add a user account: • Click Add. The Add User window appears. NOTE: If the Add User menu does not appear, disable any popup bl ock er s. • En

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual 3 Issue V1.1 1.2 Checking the Installation Environment Before installing the camera, check the installation environment according to Table 1-1. Table 1-1 Installation environment check items Check Item Standard Moisture The relative environment humidity must be in the range from 5% to 90%. If the humidity is higher than 90%, a dehumidifier must be installed, such as an air conditioner with the dehumidification function or a dedicated dehumidifier. In addition, water seepage, water dropp

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual 51 Issue V1.1 Figure 7-5 Schedule Time Setting Configure the weekly schedule. The schedule is divided into 3 periods, and motion detection will be enabled in all times during all 3 periods. Click Motion Area, and configure up to 8 motion detection areas, shown in Figure 7-6: • Select Area Motion or Area Mask to configure motion detection areas. • Area Motion allows you to select areas where motion detection is enabled. • Area Mask enables the entire image for motion detection, and allows you to se

• VHSDIR-870EXT-IP User Manual Issue V1.1 52 8. Local Record Local Record contains the following sub-menus: • Record Policy • Record Directory 8.1 Record Policy The Record Policy menu allows you to set the NAS and FTP recording parameters. Once configured, the device can record video directly to the NAS and FTP.

• Concept Pro VHSDIR-870EXT-IP, IR Network High Speed Dome User Manual About this Document Issue V1.1 ii Special notices When using video surveillance products, comply with applicable statutory and regulatory requirement to enable and maintain legal surveillance cameras. It is illegal for a company or person to install surveillance cameras in an office to monitor employees outside the scope of local law, or to use surveillance cameras to invade other people’s privacy with illegal purposes.

• VHSDIR-870EXT-IP User Manual 61 Issue V1.1 Unlocking User Accounts The admin account is the only account that can unlock user accounts that have been locked out. User accounts are locked out if the wrong password is entered 3 or more times. To unlock a user account: • Login to the camera as admin. • Click Privilege Manager

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual Issue V1.1 56 o File System: Enter the NAS file system (cifs or nfs). o Use All Space: Check to enable the camera to record until the NAS is full. Uncheck to limit the amount of space the camera can record on and enter the amount of space (in MB) available to the camera under Free Space. • Click OK. • Set up recording using the Record Policy sub-menu • To access your recordings, use HD-IP or m a nu a ll y access yo u r NAS device. NOTE: On the Record Directory page, status will be OK when the NAS is selected if the NAS is accessible and all sett

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual 31 Issue V1.1 Privacy Configure the Privacy Area for the camera, you can choose up to 8 Privacy Areas. 5.5 Device Info Description The Device Info page shows information about your IP camera, such as the Device Name (which appears in the Device List in HD-IP), firmware version, MAC address, and camera inputs and outputs. You can also configure the Device Name for your camera shown in Figure 5-7 Figure 5-7 Device Info

• VHSDIR-870EXT-IP User Manual 25 Issue V1.1 The login page is display when the control is loaded. Download the right control in the Internet Explorer Preparation • Use Internet Explorer to browse video. • Real-time video page pop-ups the message “clicks to play live video with ActiveX control to reduce latency” as shown in Figur

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual 9 Issue V1.1 2.2 Features Network Features • Supports TCP/IP protocol. • Supports video, audio, and alarm data. • Provides a built-in web browser using IE, Google Chrome, Mozilla Firefox and Safari etc. • Supports network data transmission and remote access. • Support Point-to-Point protocol over Ethernet (PPPoE), Dynamic Host configuration protocol (DHCP), and Dynamic Domain Name System (DDNS). Protocols. • Support remote upgrade and maintenance. Image Processing Features • Supports multiple steams. Single-stream model or dual-s

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual 59 Issue V1.1 o Sender E-mail Addres s: Enter the email address that will be used to send email a lerts. o Recipient E-mail Address 1~5: Enter up to 5 email addresses that will receive email alerts. o Attachment Image Quality: Select the quality of the image attachments: o High, Mid, or Lo w . o Transport Mode: Select the encryption type used by the server (SSL or STARTTLS) or select No encrypted if your se

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual 45 Issue V1.1 7. Alarm Configuration Alarm configuration contains the following sub menus: • Alarm I/O • Disk Alarm • Network Alarm • I/O Alarm • Motion Alarm 7.1 Alarm I/O Description The Alarm I/O page allows you to configure the alarms. It lets you configure the names of the alarms, and alarm modes, shown in Figure 7-1. Figure 7-1 Alarm I/O

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual Issue V1.1 24 Figure 5-3 Adding the a trusted site In the Internet Explorer, choose Tool > Internet Options > Security > Customer level, then set Download unsigned ActiveX control, initialize and script ActiveX controls not marked as safe for scripting under ActiveX controls and plug-ins to Enable, as shown in Figure 5-4. Figure 5-4 Configuring ActiveX control and plug-ins Download and install the player control as prompted.

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual 49 Issue V1.1 7.4 I/O Alarm Linkage Description The I/O Alarm Linkage allows you to configure the alarm inputs and choose if it activates a preset, track and alarm output, shown in Figure 7-4. Figure 7-4 I/O Alarm Linkage Procedure To configure the I/O Alarm Linkage: • Choose which Alarm In you would like to configure. • Enable the Alarm In and set the schedule, see Motion Detection for more information about the schedule. • Choose an Alarm Output • Choose either a Preset or Track from the drop down box you would like to trig

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual Issue V1.1 42 5.6.9 System Configuration Description Change the language for the camera OSD display (e.g. time and date display) and email alarms. Supported languages are English, Polish, Russian, and Chinese. You can also change the web mode from HTTP and HTTPS, shown in Figure 5-15 Figure 4-15 System Configuration Procedure To change the language for the OSD and email alarms: • Click Device Configuration > Language. • Under Language, select the desired language then click OK to save changes. To change the Web mode for the camera: • Click on the tick box to enable the

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual Issue V1.1 62 14. Maintenance Device Restart Click Device Restart. Click Restart then click OK to restart the camera. Default Settings Click Default Settings. Click Restore then click OK to restore the camera to factory default settings. The camera will reboot.

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual Contents Issue V1.1 iv 9 Privacy Masking…………………………………………………………………….…….56 10 Network Service……….…………………………………………………………….….57 10.1 DDNS……….……………………………………………………………………….…..57 11 Service Centre…………………………………………………………………….……..58 11.1 SMTP…………………………………………………………�

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual Issue V1.1 46 Procedure To configure the alarm I/O: • Choose which Alarm In you would like to configure. • Name that Alarm In • Choose a Voltage Level either High or Low • Choose which Alarm Out you would like to configure • Name that Alarm Out • Choose which is a Valid Signal either Open or Close. • Choose the Alarm Out Switch mode either Pulse or Switch. • Choose the Frequency if the switch is on Pulse Mode. • Set the Alarm Time. • Use Manual Control, Start or Stop if needed. • Click

• VHSDIR-870EXT-IP User Manual 55 Issue V1.1 NO TE: O n the Rec o r d Directory page, St atus will be OK when FTP is sel e ct ed if FTP is accessible and all settings have been entered c o rr ectl y . Status OK To configure a NAS storage location: • Click Local Record > Record Directory. •

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual Issue V1.1 6 Figure 2-3 Multi-head cable Table 2-1 cores of the multi-head cable No. Color Function Description 1 N/A Video output port You can connect the camera to a TV monitor through this port to view analog video. It also tells you the IP address of the camera. 2 N/A Network port Connects a standard Ethernet cable. 3 Red taped core Audio output Connects to an external audio device such as a speaker. 4 White taped core Audio input

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual Issue V1.1 44 Table 6-1 Stream configuration Parameter Description Setting Video Encode Type Set the video encoding type for the stream [Setting method] Click on the dropdown box: H.264 High Profile, H.264 Main Profile, H.264 Base Profile, MJPEG Audio Encode Type Set the audio encode type for the stream [Setting method] Click on the dropdown box: G711_ALAW, G711_ULAW, RAW_PCM, None Resolution Select the resolution for the stream [Setting method] Stream 1: 1920 x 1080,

• Concept Pro VHSDIR-870EXT-IP, VHSDIR-870EXT-IP User Manual 11 Issue V1.1 3.2 Installing a Dome Camera Installation Modes A dome camera supports wall-mounted and suspension installation modes. The following describes how to install a dome camera in wall-mounted and on a ceiling. Wall-Mounted installation Two kinds of bracket could be used. The following are steps for two different brackets, wall mount and pendant mount. Wall-Mounted Installation I Mark wall based on bracket size for drilling the holes into the wall. Drill four holes over 60 mm in depth. The bra

Related Products and Documents (Security Camera):

Comparable Devices:

Similar Resources:

• Moog Videolarm PFD7CN-3 (11 pages) www.videolarm.comPFD7CN-3SView™ Outdoor Pressurized FusionDome Installation and Operation Instructions for the following models:PFD7CN-3 IP Network Ready 7” Pressurized Outdoor PTZ Camera System with 36x zoom compression, full D1. Clear dome, with 24Vac input, heater/ blower PFD7CS-3 (Analog version) …

• Intellinet NFD130-IR (4 pages) NFD130-IR Megapixel Night-Vision Network DomeCamera1.3 Megapixel CMOS, 720p HD, Day/Night, H.264, MPEG4, M-JPEG, 3GPP, PoE,MicroSD/SDHCPart No.: 551229The Intellinet Network Solutions NFD130-IR Megapixel Night-Vision Network Dome Camera isdesigned for indoor day and night security surveillance and comes fully equipped withstate-of-the-art features that s …

• Speco HT-7246iHR (22 pages) 200 New HighwayAmityville, NY 11701631-957-8700www.specotech.comHT-7246IHR540 Line Color Dome CameraIntensifier SeriesWall & Ceiling MountablePlease read this manual thoroughly before operation and keep it handy for further reference. …

• Videology WDR 20C708W (3 pages) Check the standard power requirement before connecting to power.Settings can be made using the 5 buttons on the rear of the camera.1. Press the SET button• Settings can now be made. The SETUP menu is displayed on the monitor.2. Select a menu item from the list available by using the UP and DOWN buttons.• Functions are selected using up and down buttons.� …

• Foscam FI8904W (74 pages) UserUserUserUserUserUserUserUserManualManualManualManualManualManualManualManualModel:Model:Model:Model: FI8904WFI8904WFI8904WFI8904W //// FI8905WFI8905WFI8905WFI8905WOutdoorOutdoorOutdoorOutdoor WirelessWirelessWirelessWireless IPIPIPIP CameraCameraCameraCameraFI8904WFI8904WFI8904WFI8904W FI8905WFI8905WFI8905WFI8905W …

• COP-USA ALC-DVR (11 pages) User Manual ALC-DVR2 Band AM/FM Alarm Clock RadioCovert DVR CameraV 2.5 1It is advised to read the Safety Precaution Guide through carefully before operating the product, to prevent any possible danger. CAUTIONRISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS (OR BACK). NO USER SERVICEABL …

Comments, Questions and Opinions: