Manualios.com

Arecont Vision D4SO Series Installation Manual

Arecont Vision D4SO Series Manual Online:

4.75, 1675 votes
Arecont Vision D4SO Series User Manual
Arecont Vision D4SO Series User Guide
Arecont Vision D4SO Series Online Manual

Text of Arecont Vision D4SO Series User Guide:

  • Arecont Vision D4SO Series, Arecont Vision D4SO Outdoor Dome Series Installation Manual 1 | Page D4SO Outdoor Dome Installation Manual A. Arecont Vision D4SO Dome Camera Inside the box: B. Mounting template C. Security L-key D. One double sided hex key E. One single sided hex key F. 6-position external power & IO plug G. Pack of four (4) wood screws and four (4) dry wall anchors • #1 Phillips head screw driver Not included but needed: • #2 Phillips head screw driver • Small Flat Head screw driver Image 1 Mounting the Camera: 1. Remove camera and hardware from the box. 2. Using the Mounting Template, prepare the mounti

  • Arecont Vision D4SO Series, Arecont Vision D4SO Outdoor Dome Series Installation Manual 2 | Page 4. Run Ethernet cable through the hole on the bottom of D4SO and plug it into the RJ45 port on Arecont Vision’s compact MegaVideo ® camera. (Image 3) . NOTE: If the camera will be powered via PoE, please skip to step 5. Image 3 5. If the camera is powered by an outside power supply, run power wires through the hole and connect power wires to appropriate contacts of 6-postion connector using small flat screw driver and connect 6-position plug to camera as shown in Image 4-1. Note: Please make sure the polarity of the AC/DC input on the camera match the way wires are installed in conn

  • Arecont Vision D4SO Outdoor Dome Series Installation Manual 3 | Page 7. If you are using the side conduit opening, remove the conduit plug by first removing the socket set screw using one of provided Allen keys (Image 5). Image 5 8. To adjust the tilt, use a #1 Phillips screwdriver to loosen the screw on the side of the U bracket 1/4 turn (Image 6). CAUTION: Do not remove th

  • Arecont Vision D4SO Series, Arecont Vision D4SO Outdoor Dome Series Installation Manual 4 | Page 11. To focus the lens, loosen the three set screws as shown in Image 9 and adjust each as needed. A adjusts the zoom, B adjusts the iris, C adjusts the focus. Adjusting the Focus: Note: Adjust zoom first then focus! Note: For more information on proper focusing technique, please watch the “Focusing Arecont Vision Megapixel Cameras” Best Practices Training Video at www.youtube.com/ArecontVision. 12. Secure the dome cover to the camera. 13. Tighten the set screw on the dome cover. 14. R

  • Arecont Vision D4SO Series, Arecont Vision D4SO Outdoor Dome Series Installation Manual 5 | Page D4SO Pendant Mount (MD-CMT) Installation Instructions A. Top shield Inside the box: B. Pendant Mount C. Mounting template D. Pack of four (4) machine screws E. Pack of four (4) small machine screws F. Pack of four (4) wood screws and four (4) dry wall anchors G. Large round rubber gasket H. Smaller square rubber gasket I. One double sided hex key • #2 Phillips head screw driver Not included but needed: Image 10 1. Remo

  • Arecont Vision D4SO Series, Arecont Vision D4SO Outdoor Dome Series Installation Manual 6 | Page D4SO Wall Mount (MD-WMT2) Installation Instructions MD-WMT2 only fits with SV-JBA and SV-EBA but not with MD-JBA and MD-EBA! Caution: A. Wall mount ( Fit 1.5 NPT Standard) Inside the box: B. Top shield C. Mounting template D. One double sided hex key E. Pack of four (4) machine screws F. Pack of four (4) wood screws and four (4) dry wall anchors • #2 Phillips head screw driver Not included but needed: Image 13 1. Remove Wall Mount and hardware from the box. Image 14 2. Using the Mounting template, prepare the mounting surface. 3. Install Top Shield on Wall Mount as show

  • Arecont Vision D4SO Series, Arecont Vision D4SO Outdoor Dome Series Installation Manual 7 | Page D4SO Wall Mount Cap (MD-CAP) Installation Instructions A. Wall Mount Cap (MD-CAP) Inside the box: B. Pack of four (4) machine screws • 1½” NPT Pipe Not included but needed: • 1½” NPT Coupling • 1½” NPT Flange • #2 Phillips head screw driver Image 15 1. Remove Wall Mount Cap from the box. 2. Assemble Wall Mount Cap, 1½” Coupling, 1½” Pipe nipple and 1½” Flange as a Pendant Mount shown in i

  • Arecont Vision D4SO Series, Arecont Vision D4SO Outdoor Dome Series Installation Manual 8 | Page D4SO Junction Box Adapter (MD-JBA) Installation Instruction MD-JBA only fits with D4SO and MD-CMT but not with MD-WMT2! Caution: A. Junction Box Adapter Inside the box: B. Large round rubber gasket C. Pack of four (4) wood screws and four (4) dry wall anchors D. Pack of four (4) machine screws E. One double sided hex key • #2 Phillips head screw driver Not included but needed: • D4SO Wall Mount, MD-WMT • ¾” NPT Conduit (if necessary) Image 17 1. Remove Junction Box and hardware from the box Image 18

  • Arecont Vision D4SO Series, Arecont Vision D4SO Outdoor Dome Series Installation Manual 9 | Page D4SO Junction Box Adapter (SV-JBA) for MD-WMT2 Installation Instruction SV-JBA only fits with MD-WMT2 but not with D4SO and MD-CMT! Caution: A. Junction Box Adapter Inside the box: B. Pack of four (4) machine screws C. One double sided hex key D. Pack of four (4) wood screws and four (4) dry wall anchors E. Large round rubber gasket • #2 Phillips head screw driver Not included but needed: • D4SO Wall Mount, MD-WMT • ¾” NPT Conduit (if necessary) Image 20 1. Remove Junction Box and hardware from the box Image 21 2. Remove the conduit plug by

  • Arecont Vision D4SO Outdoor Dome Series Installation Manual 10 | Page D4SO Flush Mount Adapter (MD-FMA) Installation Instructions A. White Trim Ring Inside the box: B. Flush Mount Adapter C. Mounting template D. Pack of four (4) machine screws and one (1) I-Blot • #2 Phillips head screw driver Not included but needed: Image 22 1. Remove Flush Mount Adapter, Tri

  • Arecont Vision D4SO Series, Arecont Vision D4SO Outdoor Dome Series Installation Manual 11 | Page D4SO Electrical Box Adapter (MD-EBA) Installation Instructions MD-EBA fits with D4SO and MD-CMT but not with MD-WMT2! Caution: A. Electrical Box Adapter Inside the box: B. Pack of four (4) machine screws • #2 Phillips head screw driver Not included but needed: • Common Electrical Box, such as single gang box, double gang box or square electrical box. Image 25 1. Remove Electrical Box Adapter and hardware from t

  • Arecont Vision D4SO Series, Arecont Vision D4SO Outdoor Dome Series Installation Manual 12 | Page D4SO Electrical Box Adapter (SV-EBA) for SV-WMT2 Installation Instructions SV-EBA fits with MD-WMT2 but not with D4SO and MD-CMT! Caution: A. Electrical Box Adapter Inside the box: B. Pack of four (4) machine screws • #2 Phillips head screw driver Not included but needed: • Common Electrical Box, such as single gang box, double gang box or square electrical box. Image 28 1. Remove Electrical Box Adapter and hardware from the box. 2. Match mounting holes on adapter

  • Arecont Vision D4SO Series, Arecont Vision D4SO Outdoor Dome Series Installation Manual 13 | Page D4SO Pole Mount Adapter (MD-PMA) Installation Instructions A. Pole Mount Adapter Inside the box: B. 2x Compress Fittings C. 2x Small Steel Straps D. 2x Large Steel Straps E. Pack of four (4) machine screws • #2 Phillips head screw driver Not included but needed: • D4SO Wall Mount Adapter Image 30 1. Remove Pole Mount Adapter, Compress Fittings, Steel Straps and hardware from the box. 2. Install Compress Fittings to Pole Mount Adapter as shown in Image 31

  • Arecont Vision D4SO Outdoor Dome Series Installation Manual 14 | Page D4SO Corner Mount Adapter (MD-CRMA) Installation Instructions A. Corner Mount Adapter Inside the box: B. 2x Compression Fittings C. Pack of four (4) machine screws D. 2x Packs of four (4) wood screws and four (4) dry wall anchors • #2 Phillips head screw driver Not included but needed: �

  • Arecont Vision D4SO Series, Arecont Vision D4SO Outdoor Dome Series Installation Manual 15 | Page D4SO I/O Cable Connection • Flat head screw driver Not included but needed: Image 36 1. To use the I/O ports of the D4SO, insert the connector to Arecont Vision Compact camera and locate the “I/O” parts as shown in Image 37. NOTE: There are six connectors that look identical, be sure to use correct I/O ports shown in Image 36. Image 37 2. Run the I/O cable through the hole in the bottom of the camera and plug it into the “J7” connector as shown in image 33. NOTE: The connection is a little stiff so be sure

  • Arecont Vision D4SO Outdoor Dome Series Installation Manual 16 | Page D4SO Heater (MD-1HK) Accessory A. Heater Inside the box: B. Two (2) screws • #1 Phillips head screw driver Not included but needed: Image 38 1. Run the heater cable out of the hole in the bottom of the camera and connect it to 10- 50VDC power supply. 10 Watts max. Red is positive

More Instructions:

DOWNLOAD

Related Products and Documents (Security Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Craftsman 27675 - Professional 5 in. 3.0 Amp Random Orbit Sander Operator's manual craftsman/27675-professional-5-in-3-0-amp-random-orbit-sander-SRO.pdf 03 Feb 2023 51 3.38 Mb
2 Mid-Continent Instrument MD93 Series Installation manual and operating instructions mid-continent-instrument/md93-series-MA3.pdf 07 Mar 2024 18
3 Harbor Freight Tools 69696 Owner's manual & safety instructions harbor-freight-tools/69696-ZTT.pdf 22 Nov 2023 16
4 Silvercrest SFK 36 A1 Operating instructions manual silvercrest/sfk-36-a1-O85.pdf 03 Mar 2024 44 2.33 Mb
5 Campbell Hausfeld GN0800 Operating instructions manual campbell-hausfeld/gn0800-1US.pdf 06 Feb 2024 20 1.24 Mb
6 Sunpentown R F-250SS Instruction manual sunpentown/r-f-250ss-Z1V.pdf 13 Jan 2024 12

Similar Resources:

  • Vivotek

    sd9363

    (11 pages)
    Quick Installation GuideVIVOTEK INC.6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.|T: +886-2-82455282| F: +886-2-82455532| E: [email protected] USA, INC. 2050 Ringwood Avenue, San Jose, CA 95131|T : 408-773-8686 | F : 408-773-8298 | E : [email protected] 2MP • 20x / 30x Zoom • 60fps • NEMA 4x • IP66 • Extreme …
  • JVC

    VN-C3U - V-networks Pan/tilt/zoom Camera

    (2 pages)
    From remote monitoring to live image distribution,V.NETWORKS is your eye on the world. FeaturingEthernet connectivity, a powerful 10x optical zoomand pan/tilt, this innovative system allows you totrack live images anytime and anywhere. No PC isrequired — all you need is a network connection. So whether you’re looking for a remote monitoringtool or a simp …
  • Honeywell

    HD4UX

    (2 pages)
    HD4UXULTRA WIDE DYNAMIC TRUE DAY/NIGHT (TDN)COLOUR RUGGED MINI-DOME CAMERAHoneywell’s HD4UX is the ideal camera for environments with high contrast and changing light conditions. Using the Digital Pixel System®(DPS) Sensor Technology,light photons are converted from analogue to a digital format within each pixel immediately after the image is captured. Ev …
  • Vivotek

    FE8173

    (11 pages)
    Quick Installation Guide3MP • 360° Surround View • PoE All specications are subject to change without notice. Copyright 2013 VIVOTEK INC. All rights reserved. cP/N:625021401G Rev.: 1.1FE8173Fixed Dome Network CameraEnglish繁中 日本語Español Português簡中FrançaisDeutschItalianoTürkçePolskiРусскийČesky SvenskaDanskDutchIndonesi …
  • Ultrak

    KC452xMx Series

    (32 pages)
    KCMU00000406/08/01KC452xMx/KC652xMx1/3" BLACK-AND-WHITECCD CAMERAUSERMANUALUltrak Worldwide Support CenterSales & Technical Support1301 Waters Ridge Drive • Lewisville, TX 75057(800) 796-2288 • (972) 353-6400 • FAX (972) 353-6670 …
  • EverFocus

    EHD500IR

    (1 pages)
    33 34DimensionsSpecificationsFeaturesFeaturesEHD-500IRColor CamerasColor CamerasColor Cameras Infrared CamerasOrdering InformationDay/NightOutdoorEHD500IR: 550 TVL Vandal IR Dome, 3-axis gimbals, 2.6~11mm lens•••••••••550 TVL IR Vandal Dome, 3-Axis Gimbals, Surface or Flush Mount Capabilities Video FormatPicture Element …

Security Camera Instructions:

Comments, Questions and Opinions: