Manualios.com

Texas Instruments TravelMate 5000 Series User Reference Manual

Texas Instruments TravelMate 5000 Series Manual Online:

4.35, 523 votes
Texas Instruments TravelMate 5000 Series User Manual
Texas Instruments TravelMate 5000 Series User Guide
Texas Instruments TravelMate 5000 Series Online Manual

Text of Texas Instruments TravelMate 5000 Series User Guide:

  • Texas Instruments TravelMate 5000 Series, 7. Press Enter. Your computer reboots. Installation is complete. n Note: A supplemental DOS diskette is provided as a part of the system backup. This contains files from old DOS versions that you may find useful. To install these files, insert the supplemental DOS diskette into the floppy drive. From the A:\ prompt, type: Setup C:\DOS. Follow instructions on the screen. Windows for Workgroups Installation To install Windows for Workgroups, complete the following steps: 1. Place Windows for Workgroups Installation diskette #1 into the A:

  • Texas Instruments TravelMate 5000 Series, When Should You Rebuild? You should rebuild your system from the system backup diskettes when: ❑ you replace a hard drive and want to restore primary system files to the new drive. ❑ a fatal system error occurs and you are unable to access system files. n Note: These rebuild procedures overwrite what is currently on your disk and create a new partition. Ensure that you always have a current backup of your data. Hard Disk Preparation To load initialization files, complete the following steps: 1. Insert the TravelMate 5000 System Files Recovery Diskette into drive A: and boot the system. A Recovery menu appears. 2. Select Delete Part and press Enter. You are prompted to choose an FDISK

  • Texas Instruments TravelMate 5000 Series, n Note: The Add-On Memory board does not directly connect to the computer. The curve of the plastics on the underside of the computer causes the board to show beyond the lip of the plastic. The board is properly seated in this position. 7. Turn the unit upside down on a padded surface. 7. Replace the bezel and tighten the screws. Replace the bezel and tighten screws RAM Expansion TravelMate Options 9-23

  • Texas Instruments TravelMate 5000 Series, 6. Enter the Volume Label from information on the screen. You are asked if you are sure you want to delete the partition. 7. Select YES. 8. Press Esc to continue. 9. Select Option 3 to Delete Partition or Logical DOS Drive. 10. Select Option 4 to Delete Non-DOS Partition. 11. Select Option 1 to confirm deletion of the Non-DOS Partition. You are asked if you wish to continue. 12. Select Y to continue. 13. Press Esc to continue. 14. Do not insert the MS-DOS System1 diskette. Instead, ensure that the System Files Recovery diskette is still in drive A and press Esc to reboot. 15. Sel

  • Texas Instruments TravelMate 5000 Series, H Creating Help Displays You can custom design your own Help displays to show information for your own programs or off-the-shelf applications. You also can add subjects and related descriptions to the HELP.DAT file created at the factory. Use an ASCII word processor or editor (such as the MS-DOS Edit utility) to create and edit the HELP.DAT files or an editor that creates or “exports” files in ASCII format. Rules for Creating Help Files Use the following rules to create your own help files. ❏ : : HELP —

  • Texas Instruments TravelMate 5000 Series, 5 Laptop File Manager This chapter tells you about ❑ Using the Laptop File Manager (LFM) program to manage and view your files and directories ❑ LFM commands that simplify directory and file copying, deletion, printing, renaming, and other common file management functions Contents Getting Started with LFM.................................................5-3 Loading LFM....................................................................5-4 Using the Main Menu ......................................................5-5 Function Key Commands.................................................5-6 F1 Help Key.................................................................5-6 F2 CDir (Ch

  • Texas Instruments TravelMate 5000 Series, RAM Expansion Your computer is equipped with 8 MB of random access memory ( RAM). You can increase memory by installing one of the RAM options: ❑ 8-MB RAM Expansion Board (TI Part No. 9798816-0001). This expands RAM from 8 MB to 16 MB. ❑ 16-MB RAM Expansion Board (TI Part No. 9798816-0002). This expands RAM from 8 MB to 24 MB. Additional Memory Expansion ❑ 8-MB Add-On Memory Expansion (TI Part No. 9798816-0003) - allows further memory expansion by adding an additional memory card onto one of the existing memory expansion boards. The following table illust

  • 8. After the files are copied, select the following values: ❑ Jazz I/O Port = 220 ❑ Jazz IRQ = 5 ❑ 8-bit DMA = 1 ❑ 16-bit DMA = 7 ❑ MPU-401 Enabled = Yes ❑ MPU-401 I/O Port = 330 ❑ MPU-401 IRQ = 2 ❑ Modify C:\DOS System Files = Yes ❑ Modify Win System Files = Yes 9. Press Enter to accept the configuration. 10. When installation is complete, press F3 to end the install

  • Texas Instruments TravelMate 5000 Series, Sound Installation n Note: Not available on TM5020SE models. To install Media Vision Jazz16 sound drivers from MS-DOS, complete the following steps: 1. Insert the Media Vision Jazz16 Installation diskette into drive A:. 2. Type A: at the DOS prompt and press Enter. The system prompt is now A:\. 3. Type INSTALL and press Enter to begin installation. 4. Select Install Software and Setup Hardware and press Enter. You are prompted for the path into which JAZZ drivers will be copied. 5. Press Enter to keep the default path of C:\JAZZ.

  • Shock Maximum 60g pulse in X and Y orientation and a 35g pulse in the Z axis. Operating: Maximum 6g pulse in X, Y, and Z orientations Storage: Maximum 60g pulse in X, Y, and Z orientations Vibration Operating: Sinusoidal 5 to 20 Hz limited to 0.0244 inch peak-to-peak maximum displacement 0.5g, 20 to 400 Hz Storage: Sinusoidal 5 to 20 Hz limited to 0.244 inch pea

  • Texas Instruments TravelMate 5000 Series, Glossary This glossary explains many of the terms found in this manual as well as other computer-related terms. access — The ability to obtain data from or place data into internal memory, a floppy, or the hard drive. adapter — A device that connects an option to the computer. application program — A program that instructs the operating system to perform specific tasks by using either off-the-shelf routines, such as word-processing, or programming languages such as BASIC that allow you to

  • Index A AC Adapter ............................ 9-3, 9-25 Acrobat diskette...................................... 2-6 driver ......................................... 2-5 installation............................... 2-22 manuals .................................... 3-4 Activity Monitor ............................ 1-18 Alarm battery .....................................

  • Texas Instruments TravelMate 5000 Series, System Files Recovery Diskette To ensure that your system files are completely restored, complete the following steps: 1. Insert the System Files Recovery diskette into drive A and reboot the system. A Recovery menu appears. 2. Select Restore Init and press any key. The C:\INIT directory and files are restored. 3. Press any key. 4. Select Restore Cmos and press any key. CMOS factory settings are restored. 5. Press Esc to exit and remove the System Files Recovery diskette. 6. Reboot the system. 7. Press F5 to bypass loading the system files. 8. A

  • Texas Instruments TravelMate 5000 Series, DOS Utilities DOS Mixer The DOS Mixer allows you to adjust the volume controls and balance for individual mixer channels and selected record source. To start DOS Mixer, go to the JAZZ directory and at the DOS prompt (C:\JAZZ) type: JAZZMIX or JAZZTSR and press Enter. n Note: JAZZTSR lets you load the TSR which allows you to automatically call up DOS Mixer by pressing the left and right Shift keys simultaneously. The DOS Mixer control panel appears. This panel allows you to perform the following functions: ❑ Master Volume - controls the sound intensity heard through headphones or speakers ❑ Synth Volume - controls the

  • Texas Instruments TravelMate 5000 Series, System Configuration Parameters This set of parameters allows you to customize settings for Quick Boot, alarms, and multimedia options. The following table provides more information on these settings: Parameter Definition Values Quick Boot When set to "On", allows the system to bypass certain power-on tests during the boot process. On (default) Off Battery Alarm Enables or disables the low battery alarm when the unit is on battery power. On (default) Off Cover Alarm (Not available on SE models) Enables or disabl

  • Texas Instruments TravelMate 5000 Series, c Caution: Texas Instruments does not warranty the use of non-TI memory. TI will not be held responsible for problems or degradation of performance incurred by the use of any memory other than the TI memory described in these instructions. Preparing a Unit for Installation To prepare a unit for installation, complete the following steps: c Caution: Prevent component damage caused by electrostatic discharge ( ESD). Use a high-impedance, grounded-conductive floor mat or wrist strap to prevent ESD. Before touching the integrated circuit devices, discharge stati

  • Texas Instruments TravelMate 5000 Series, You also can copy a file/directory to another name you type at the Path: prompt. You can create a new directory while copying. At the Path: prompt type the new directory name as part of the pathname, and press Enter. LFM prompts at the bottom of the screen Directory doesn’t exist, CREATE? [ Y ] Press Y if you want LFM to create the new directory. If you try to copy a file using the same filename under a different directory, LFM prompts at the bottom of the screen Copy file : [R]eplace, [A]ppend, [S]kip To this prompt do one of the following: ❑ Press R if you want LFM to delete the existing file and replace it with the highlighted file. ❑ Press A if you want LFM to

  • GETSTAT /V If the computer is displaying data on both the external monitor and the built-in LCD, GETSTAT exits with an ERRORLEVEL=2. If the computer is displaying data on an external monitor, GETSTAT exits with an ERRORLEVEL = 1; if the computer is using its built-in LCD, GETSTAT exits with an ERRORLEVEL = 0. GETSTAT /S Usage: returns the system type /1 TM4000 /2 TM4000E

  • Texas Instruments TravelMate 5000 Series, Accessing ROM-Based Setup ROM-based Setup resides in internal ROM. It is identical to disk-based Setup except it does not have any online help. To access Page 1 of ROM-based Setup, save any work in progress, and press Ctrl-Alt-Esc. You can then select parameters as you do for disk-based Setup. Accessing Windows-Based Setup To access Windows-based Setup, complete the following steps: 1. Double click on the TravelMate Notebook Center group. 2. Double click on TI Setup. Several folders appear. You can define parameters based on the information in the online help and in this chapter. Changes to many of the Setup parameters take effect only at system start

  • Texas Instruments TravelMate 5000 Series, n Note: if the power saving features of your computer do not appear to be working, it may be because you are running applications that do not recognize Windows power management. In this case, select the Standard setting. Productivity Utilities 3-6 Custom Windows Utilities

  • Texas Instruments TravelMate 5000 Series, Use Conditions This part complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Remarque à l’intention des utilisateurs canadiens Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

  • Texas Instruments TravelMate 5000 Series, @echo off rem Version 2.02 rem ================================================ rem check to see which TI system program is running on rem ================================================ getstat /s if ERRORLEVEL 255 goto unknown if ERRORLEVEL 4 goto yes_tm5 if ERRORLEVEL 3 goto yes_tm4m if ERRORLEVEL 2 goto yes_tm4e if ERRORLEVEL 1 goto yes_tm4 :unknown echo The system type is unknown. goto exit_all :yes_tm5 echo The system is a Texas Instruments TravelMate 5000. rem ================================================ re

  • Texas Instruments TravelMate 5000 Series, n Note: Ensure that you have pressed the Battery Status button to get the current battery charge reading. If you wish to check the charge of any Lithium-ION battery after the LEDs have turned off, press the battery status button to the right of the LEDs on the battery pack and they will light once again. ❑ Low battery state. As the battery discharges, LEDs will turn off one at a time from right to left until the battery is almost depleted. At that time, the last green LED will turn off and a red LED comes on. At the point of near depletion the red LED will begin to flash. As you recharge batteries, the red LED no longer flashes, and will eventually

Related Products and Documents (Laptop):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Kenwood DPC-72 Instruction manual kenwood/dpc-72-Q3U.pdf 22 Jul 2023 20
2 Electro-Voice RE97-2Tx Technical specifications electro-voice/re97-2tx-FO8.pdf 17 Apr 2023 6 1.03 Mb
3 Qtx UH5 Operation & user’s manual qtx/uh5-V9H.pdf 04 Jan 2024 4
4 HP Pavilion t458d Specification hp/pavilion-t458d-T63.pdf 06 Jul 2022 1
5 Kawasaki 691795 Instruction manual kawasaki/691795-1A5.pdf 24 Aug 2023 14
6 Frigidaire 1400 Use & care manual frigidaire/1400-2QE.pdf 27 Nov 2022 16 1.41 Mb

Similar Resources:

  • Compaq

    108164-003 - ProLiant - 800

    (11 pages)
    WHITE PAPER 1Doc.No. ECG072/0298................................................................................................................................................................February 1998Compaq ComputerCorporationCONTENTSExecutive Summary........ 1Overview........................ 3Innovations Timeline ...... 4Recent Innovationsand Benefit …
  • Panasonic

    CF-74

    (56 pages)
    1Fingerprint ReaderModel No. CF-51 / CF-74 SeriesFRANÇAISDEUTSCHENGLISHDFERGÄNZENDE ANWEISUNGENBezeichnung und Funktion der Teile .... 20Überblick ................................................. 22Installation ............................................... 23Weitergehender Datenschutz ................. 26Praktische Informationen ...................... …
  • Toshiba

    C655-S5206

    (4 pages)
    This product specification is variable and subject to change prior to product launch. © Copyright 2011 Toshiba America Information Systems Inc. All Rights reserved. TAIS shall not be liable for damages of any kind for use of this information, which is subject to change without notice. Satellite C655-S5206 Page 1 of 4 Satellite C655 Detailed Product …
  • Lenovo

    IdeaPad Z500

    (30 pages)
    V1.0_en-USLenovo IdeaPad Z500/P500Read the safety notices and important tips in the included manuals before using your computer.©Lenovo China 2012User Guide V1.0 …
  • Toshiba

    R830-ST8300

    (5 pages)
    This product specification is variable and subject to change prior to product launch. © Copyright 2011 Toshiba America Information Systems Inc. All Rights reserved. TAIS shall not be liable for damages of any kind for use of this information, which is subject to change without notice. Portege R830-ST8300 Page 1 of 5 Portege R830 Detailed Product Sp …
  • Sony

    VPCSA2SGX

    (2 pages)
    VPCSA2SGX/TAll Day MobilityLeveraging the latest innovations in lithium polymer technology, the battery of the S Series is integrated into the PC and conforms to the contours of the chassis oering a thinner battery prole while still supplying up to 15 hours of battery life.9 This concept even extends to the all-new large capacity sheet battery and lea …

Comments, Questions and Opinions: