avertX HD510 Operation & User’s Manual

Text of avertX HD510 User Guide:

• avertX HD510, 33023AA 37 The AvertX HD510 has an Event Handler, or set of protocols that determine how to deal with IP devices and their response to situations, including both triggers and responses. The AvertX HD510 can interact with numerous external devices to activate triggers and prompt responses. Click the Expand icon next to the Event list to expand the options. The event servers define which devices the camera can interact with, most commonly being other devices on the network. The event servers are classified as FTP, SMTP and HTTP servers. FTP Server: these servers receive snapshot or video uploads that are issued as part of the response from event handlers. To set up a F

• avertX HD510, 33023AA 29 Host options include the Host Name, Language options, and the Camera Name that will be displayed to identify the channel. 1. Click within the text box you wish to modify. 2. Type the new desired name. 3. Click Apply. 1. Click the Language drop down menu 2. Select a language, and then click Apply. 3. The browser will refresh, and then display the selected language. SNTP/NTP Server – configure the settings by pulling date and time information from a reliable provider. Set Manually –configure the settings manually using the Date and

• avertX HD510, 2 HD510 High Definition Outdoor IP PTZ Dome Camera Operations Manual Manual Edition 33023AA – OCTOBER 2014 ©2014, AvertX All Rights Reserved No part of this document may be reproduced by any means, electronic or mechanical, for any purpose, except as expressed in the Software License Agreement. AVERTX shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice. The information in this publication is provided “as is” without warranty of any kind. The entire risk arising out of the use of this inform

• avertX HD510, 33023AA 15 The HD510 PTZ camera can be mounted in a number of ways. Depending on the situation, you may need to install the mounting solution first before connecting the cables, or the cables may need to be connected before installing the mounting solution. Below are basic installation details for the standard supplied mounting solution. The standard supplied wall mounting solution offers waterproof protection for both the camera and cables. The wall mount has a lower hole that can be used for an outdoor waterproof cable situati

• avertX HD510, 28 You can access the camera setup menu using an internet browser on your computer. The camera viewer software will install automatically the first time you connect to the camera. If your internet browser doesn’t install the viewer software, check the security settings or ActiveX controls and plug-in settings. If your internet browser asks for permission to install the plugin, you must allow ActiveX or QuickTime to install to continue the installation. Host – define the name of the camera and the preferred interface language. Date and Time – provides options for adjusting the time and date of the camera. Network – listing of network related functions, services,

• avertX HD510, 33023AA 11 Before installing or connecting the dome camera, please refer to this section and complete preparations for dome setup and all switch settings. Height: 10.9” (including wall mount bracket) Width: 7.9” Safety Strap Screw Camera Dome Cover Lens Mounting Bracket

• avertX HD510, 33023AA 23 If it is necessary to reset the camera to the factory default settings, hold down the Reset button (see Camera Overview) for 30 seconds. This will return all settings, including network setup, to the factory default. The IP address of the camera will be reassigned by the router. Your camera includes a microSD card slot (compatible with cards up to 32GB), which can be used for emergency video backup. The microSD card is not included. You must remove the clear dome cover of the camera to access the microSD card slot. T

• avertX HD510, 40 The System section provides the list of functions that help manage the camera User Account allows you to change the account name or password of the Administrator account that has full access to the camera, create up to 10 common users that only have access for live view and the PTZ control, and to enable/disable the option for live view by users who are not logged in. The System Info provides the full information about camera status, settings, and log. This information is for viewing purposes and may assist you with camera configuration or maintenance. This section allows you to return the camera to defau

• avertX HD510, 8 The HD510 PTZ Camera is capable of providing real time streaming video with smooth image quality. The HD510 offers quad streaming and can be used in a variety of installations including shops, stores, home, banks, factories and for building surveillance. With Power over Ethernet Plus (PoE +), the need for separate power lines is eliminated and cabling and installation costs can be significantly reduced. The light weight, small size, and large degree of rotation of the camera facilitates quick and simple installation on either the ceiling or walls of structures or vehicles. IP Address Dynamic Host

• 26 To zoom continuously: 1. Select a Speed, with higher numbers representing faster speeds. 2. Click and hold the Continuous Zooming buttons for zooming in or out. To zoom in steps: 1. Enter the desired Step Size. 3. Click the Stepped Zooming buttons one click at a time to zoom in by the set Step Size per click. After adjusting the camera, it is recommended to adjust the Focus Co

• avertX HD510, 20 5. Attach the gland body to the Ethernet port of the camera. Ensure the rubber ring is completely aligned and flat on the gland body to prevent water leakage. 6. Connect the Ethernet cable to the Ethernet port of the camera. 7. Insert the sealing rubber into the conduit gland body. 8. Tightly attach the clamping nut to the conduit gland body. 9. Arrange all unused camera cables and wrap them in waterproof tape. Different applications and installation environments require different types of waterproof methods that may not be covered in this manual. Check your installation environment and adapt a suitable waterproof mehod. If the cam

• avertX HD510, 33023AA 7 Event Server ............................................................................................................................................................................................ 36 Event Configuration .................................................................................................................................................................................. 36 Event List ................................................................................................................................................................................................. 37 Manual Event .....................................

• TABLE OF CONTENTS ................................................................................................................................................................................................................... 5 INTRODUCTION ...........................................................................................................................................

• avertX HD510, 34 The default video and audio settings are sufficient in most installation settings. This section provides detail on streaming, video quality, and audio configuration if settings need to be adjusted. Camera options allow you to control the streams of the camera, including the Stream Mode and the number of Video Streams. To modify the camera streams: 1. Use the drop-down menus to select Stream Mode and the number of Video Streams. 2. Click Apply. Video allows you to modify detailed features of the camera, including Compression, Motion Detection, Day/Night, Image, Exposure/White Balance, and OSD/Privacy Mask. This section allows the configuration of

• avertX HD510, 33023AA 35 Motion detection is based on Stream 1, and by default, all regions are disabled. Up to three detection regions can be enabled, each with their own location, size, and sensitivity. To enable and configure motion detection: 1. In the Motion Detection tab, click Setup. 2. Check the Enabled check box to enable the desired Detection Regions. 3. Drag the detection square to the desired region in the camera view. 4. Drag the lower right corner of the detection square to change

• avertX HD510, 33023AA 13 Use the included IP Utility software to easily find your network cameras for initial setup. The IP Utility software is included on the software CD with your camera. The HD510 PTZ camera is DHCP compatible, meaning it can be assigned an IP address from a DHCP server automatically when connected to the network for the first time. This is ideal for setup that requires an indirect connection between the camera and recorder, usually for network security or installation considerations. Use the IP Utility software to configure your IP cameras

• avertX HD510, 33023AA 43 ww.avertx.com 1-855-2AVERTX © 2014 AvertX All rights reserved. No part of this publication may be reproduced by any means without written permission from AvertX. The information in this publication is believed to be accurate in all respects. However, AvertX cannot assume responsibility for any consequences resulting from the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate such changes. IRREL!

• 36 On-Screen Display is used to add text to the upper or lower left corner of video. This can be used for branding or authentication purposes. Primarily, the text is kept as small as possible and is not resizable. The text is kept as small as possible as not to block any video. To add an OSD to your video: 1. Check the Enabled check box next to the desired OSD region. 2. Use the

• avertX HD510, 33023AA 31 IEEE 802.1X is an IEEE standard for port-based Network Access Control. This requires network port devices to provide verification before being allowed access to a protected network, usually in the form of a username and password. 1. To enable IEEE802.1X, check the Enabled check box. 2. Designate an EAPOL Version. 3. Enter the desired Username and Password that will be used for verified access to the network. 4. Upload CA or User Certificate, and User Private Key from the RADIUS server. 5. Click Apply. After the configuration of IEEE 802.1X, you will

• 22 14. Connect the Ethernet connector to the Ethernet port of the camera. 15. Insert the sealing rubber into the gland body. 16. Tightly attach the clamping nut to the cable gland body. Different applications and installation environments require different types of waterproof methods that may not be covered in this manual. Check your installation environment and a

• avertX HD510, 24 1. Type the IP address of the camera in a web browser. --OR-- Use the included IP Utility software and locate the camera on the IP Finder list, then double-click the camera to open the Viewer software in your web browser, or right-click and select Browse. 2. Log in to the camera with the appropriate User Name and Password. The default User name is admin and the default Password is1234. The username and password are case sensitive. When connecting to the camera in a web browser, the Live View screen is the default home screen. From this screen you can view and control live video. If you

• avertX HD510, 30 If you wish restrict or allow specific IP addresses from accessing the camera, you can use the IP address filter. You can Block or Allow IP addresses. To restrict or allow specific IP addresses to access your camera: 1. Check the Enabled check box. 2. Using the drop-down menu, select Blocked or Allowed. 3. Type in IP address or Network that you wish to block/allow access to your camera. 4. Check the Enabled check box next to the address. You can have IP addresses or Networks on the list, but not enabled. The Enabled check box must be checked in order to activate either blocking or allowing that

More Instructions:

avertX HD510 Quick start manual 28-11-2023 2

DOWNLOAD

Related Products and Documents (Security Camera):

Comparable Devices:

Similar Resources:

• D-Link DCS-3420 (24 pages) Quick Installation Guide+Руководство по быстрой установке+Guía de Instalación Rápida+Guia de Instalação Rápida+快速安裝指南+Petunjuk Pemasangan Cepat+Wireless Day & Night iNterNet CameraDCS-3420 …

• D-Link ANT24-0801 (23 pages) CAUTION!!Please always put the surge protectorindoors and near the device side, if you cannot keep it indoors,use the tapes to wrap all the connectorsas pictures showed below.Option: Ultra low-loss cable LMR400Length options: 3M/6M/9MOption: Surge protectorConnectors: N-plug to N-jack …

• Moog RC200C (7 pages) www.videolarm.comR C 2 0 0 CRotating Ceiling HousingInstallation and Operation Instructions for the following model:RC200C Indoor IP network xed camera housingBefore attempting to connect or operate this product, please read these instructions completely.81-IN5028 01-12-2012© 2011, Moog Videolarm, Inc. All Rights Reserved …

• Marshall Amplification CV605-BK (16 pages) Broadcast A/V DivisionUser ManualCV605-BK (black) CV605-WH (white) 5x HD60 IP PTZ Camera with 3GSDI User Manual CV605-BK (Black)CV605-WH (White)5x HD60 IP PTZ Camera with 3GSDI …

• Speco CVC6146SCS Series (1 pages) Speco Control Series Cameraswith Full On-Screen Display FunctionsSpecifications subject to changeFor more information contact us at:Speco Technologies 200 New Highway, Amityville, NY 11701 Web: www.specotech.comToll Free: 1-800-645-5516 In Metro NY: 631-957-8700 Fax: 631-957-9142 or 631-957-3880FeaturesFull OSD control of all major camera functions:• Lens …

• Vitek Transcendent VTD-TND3RFE (8 pages) VITEKVITEK VTD-TND3RFETranscendent Series 3 Megapixel Indoor/Outdoor WDR IP Dome Camera with 24 IR LED IlluminationQUICK START GUIDEFEATURES• 1/3” 3.0 Megapixel CMOS Image Sensor• Up to 30fps live view @ 3 MegaPixel (2048x1536)• 2.8mm or 3.6mm Fixed Iris Lens Options• 24 Infrared LED’s with 70’ IR Range • Digital Wide Dynamic Range (D-WDR)• …

Comments, Questions and Opinions: