Vivax ACP-12CT35GECI Service Manual

Text of Vivax ACP-12CT35GECI User Guide:

• Vivax ACP-12CT35GECI, 26 Installation Manual 7.3 Installation Tips 1.Removing and installing front pane Removal method 1)Slide until the 2 stoppers click into place 2)Open the front panel forward and undo the string 3)Remove the front panel Installation method 1)Attach the front grille and front panel after pulling the string around them. 2)Close the front panel and slide until the stoppers click outside. 2.Removing and installing front grille Removal method 1).Open the front panel. 2)Remove the 4 screws and remove the front grille while pulling it forward(3 tabs). Installation method 1)Secure the front grille with the 4 installation screws (3 tabs) 2)Return the front panel to the original positi

• Vivax ACP-12CT35GECI, 53 Removal Procedure 10.2 Removal Procedure of Outdoor Unit(09K/12K) top panel 1 1 Be sure to wait for a minimum of 10 minutes after turning off all power supplies before disassembly. Warning 1. Before disassembly 2. Remove big handle Remove the connection screw fixing the big handle and then remove the handle. 3. Remove top panel Remove the connection screws connecting the top panel with the front panel and the right side plate, and then remove the top panel. big handle

• Vivax ACP-12CT35GECI, 54 Removal Procedure 1 1 1 1 4. Remove front grille Remove the connection screws between the front grille and the front panel, and then remove the front grille. 5. Remove front panel Remove the connection screws connecting the front panel with the chassis and the motor support, and then remove the front panel. 6. Remove right side plate Remove the connection screws connecting the right side plate with the chassis, the valve support and the electric box. Then remove the right side plate. 7. Remove axial flow blade Remove the nut on the blade and then remove the axial flow blade. front grille panel right side plate axial flow blade

• Vivax ACP-12CT35GECI, 60 Removal Procedure 1 1 1 6. Remove 4-way valve assy (not available for cooling only unit) Discharge the refrigerant completely; unsolder the pipelines connecting the compressor and the condenser assy, and then remove the 4-way valve assy. 7. Remove compressor Remove the 3 foot nuts fixing the compressor and then remove the compressor. Remove the 3 screws fixing the isolation sheet and then remove the isolation sheet. 8. Remove chassis sub-assy and condenser sub-assy compressor 4-way valve assy isolation sheet

• Vivax ACP-12CT35GECI, 37 Exploded Views and Parts list The data above are subject to change without notice. ACP-12CT35GECI Product Code CV010W0020 1 Front grill 22413433 1 2 Front Panel 015330124 1 3 Chassis Sub-assy 01203806P 1 4 Compressor and fittings 0010376301 1 5 Compressor Gasket 76713027 3 6 4-Way Valve Assy 03123487 1 7 Right Side Plate Sub-Assy 0130200001 1 8 Valve Support 01713041 1 9 Valve 07100005 1 10 Valve 07100003 1 11 Big Handle 26233431 1 12 Condenser Assy 01113863 1 13 Capillary Sub-assy 03063447 1 14 Temperature Sensor 39000310 1 15 Rear Grill 01473014 1 16 Magnet Coil

• Vivax ACP-12CT35GECI, 61 Removal Procedure 2 3 Remove the screws connecting the support (condenser) and the condenser assy, and then remove the support (condenser). Separate the condenser sub-assy and the chassis sub-assy. support condenser sub-assy chassis sub-assy

• 31 Installation Manual 6.Connecting the refrigerant pipe Wrench Indoor unit tubing Open-end wrench (fixed) Connection pipe Flare nut 1)Use torque wrenches when tightening the flare nuts to prevent damage to the flare nuts and gas leaks. Coat here with refrigeration oil 2)Align the centres of both flares and tighten the flares and tighten the flare nuts 3 or 4 turns by hand. T

• Vivax ACP-12CT35GECI, 5 Specifications  CV01000030 Rated Voltage V ̚ 220-240 Rated Frequency Hz 50 Phases 1 Indoor W 5270 ˄ 900~5600 ˅ W 5500 ˄ 900~6600 ˅ W 1630 ˄ 360~2500 ˅ W 1520 ˄ 350~2500 ˅ A7.09 A6.61 W 2500 A10.87 m 3 /h 650/620/-/500/-/410/320 L/h 2 W/W 3.23 W/W 3.62 W/W - W/W - m 2 23-34 Model of indoor unit�

• Vivax ACP-12CT35GECI, 47 Troubleshooting Note: The information above is for reference only. (4)Troubleshooting for H6 malfunction Start the troubleshooting for H6 malfunction Check whether the terminal of DC motor is connected tightly Insert the motor terminal tightly Is mafunction eliminated? Is mafunction eliminated? Is mafunction eliminated? Pull blade with hand to see whether i it can rotate smoothly Re-assemble blade and motor correctly Whether motor can be started up Replace motor Replace controller End Whether the voltage on motor feedba

• Vivax ACP-12CT35GECI, 43 Troubleshooting 9.4 How to Check simply the main part (1) Troubleshooting for malfunction of temperature sensor main check point: Whether the temperature sensor is broken or damaged; Whether the temperature sensor terminal is loosened or not connected; Whether the mainboard is damged; Check flow chart: Start the troubleshooting for temperature sensor Check whether the temperature sensor and wiring terminal is loosened or poorly connected? Insert the temperature sensor well Is mafunction eliminated? Is mafunction eliminated? Replace temperature with the same mode Check whether the temperatur

• Vivax ACP-12CT35GECI, 32 Installation Manual 7.Checking for gas leakage 1)Check for leakage of gas after air purging 2)See the sections on air purges and gas leak checks in the installation manual for the outdoor unit. 8.Attaching the connection pipe Check for leakage here Apply soapy water and ch- eck carefully for leaking gas. wipe soapy water off after the check is complete. Attach the pipe after checking for gas leakage, described above. 1)Cut the insulated portion of the on-site piping, matching it up with the connecting portion. 2)Secure the slit on the refrigerant piping

• Vivax ACP-12CT35GECI, 56 Removal Procedure     12. Remove solenoid coil Remove the screw fixing the solenoid coil and then remove the coil. 13. Remove liquid valve and gas valve 14. Remove compressor Unsolder the welding joint connecting the 4-way valve assy with the compressor and the condenser, and then remove the 4-way valve assy; unsolder the welding joint connecting the capillary and the outlet pipe of condenser to remove the capillary. (Do not block the capillary with welding slag during unsoldering.) Remove the foot nuts

• 41 Troubleshooting Communication malfunction of indoor unit and outdoor unit Hard ware malfunction E6 blinks 6 times Compressor phase current circuit detection malfunction Hardware malfunction U1 blinks 12 times Compressor demagnetization protection Hardware malfunction HE blinks 14 times DC busbar voltage drop malfunction Hardware malfunction U3 blinks 20 times Module temperature protectio

• Vivax ACP-12CT35GECI, 20 Function and Control T-ON T-OFF: SLEEP: 9 Press this button, can select Sleep 1 ( ), Sleep 2 ( ),Sleep 3 ( ) and cancel the Sleep, circulate between these, after electrified, Sleep Cancel is defaulted. Sleep 1 is Sleep mode 1, in Cool, Dehumidify modes: sleep status after run for one hour, the main unit setting temperature will increase 1 present time.Holding down either button above 2 seconds increases or decreases the CLOCK : time by 1 minute every 0.5 second and then by 10 minutes every 0.5 second. During blinking after

• Vivax ACP-12CT35GECI, 14 Schematic Diagram Outdoor Unit 09K 12K 18k These circuit diagrams are subject to change without notice, please refer to the one supplied with the unit. BKWH 0 0 0 R(U) S(V) CN2 YEGN AC-L1 N1 YEGN BU E BN BK C(W) PE PE PE COMU RT1 RT2 RT3 BU YE RD OVC-COMP RD RD SAT YEGN COMP BK BN BU N3N2 TERMINAL COMP. COMP-U COMP-V COMP-W LX-2 OG WH LX-1 L OUTTUBE TEMP. SENSOR OUTROOM TEMP. SENSOR EXHAUST TEMP. SENSOR 4YV 4V FAN MOTOR PE BLOCK 4-WAY VALVE PE PE YEGN REACTOR L1 L1 L2 L2 L2 AC-L2 OFAN OFAN-BRW OFAN-RED BU L3 L3 BU (BK) BN RD PROTECTOR OVERLO

• Vivax ACP-12CT35GECI, 27 Installation Manual 7.4 Indoor unit Installation 1.Refrigerant piping 1)Drill a hole ( 65mm in diameter ) in the spot indicated by the symbol in the illustration ad below . 2)The location of the hole is different depending on which side of the pipe is taken out . 3)For piping ,see6.Connecting the refrigerant pipe ,under Indoor Unit Installation(1). 4)Allow space around the pipe for a easier indoor unit pipe connection. Min.allowable length The suggested shortest pipe length is 2.5m,in order to avoid noise from the outdoor unit and vibration. (Mechanical noise and vibration may occur depending on how the unit is installed and the environment in which it is used

Related Products and Documents (Air Conditioner):

Comparable Devices:

Similar Resources:

• Kaisai KUE-18HRF32 (36 pages) CEILING & FLOOR TYPE AIR CONDITIONER Installation ManualCeiling & Floor TypeIMPORTANT NOTE:Read this manual carefully before installing or operating your new air conditioning unit. Make sure to save this manual for future reference.KUE-18HRF32KUE-24HRF32KUE-36HRF32KUE-48HRF32KUE-55HRF32 …

• Panasonic CW-A120VR (2 pages) 7.1. Main Unit7.1.1. Vertical Airflow Direction Vane.Airflow direction adjustment Up-and-Down. • • • • The vertical airflow direction vane maybe positioned to deflect the airupwards, downwards or straight on.7.1.2. Ventilation Lever.When the slide lever is in the: • • • • “OPEN” position, the ventilation door isopened to allow air, …

• Julabo AWC100 (16 pages) Operating Manual Compact Recirculating Cooler AWC100 Compact Recirculating Cooler AWC 100 1.951.4820-V4 07/2019 Project 1265 JULABO GmbH 77960 Seelbach/Germany Tel: +49 7823 51-0 Fax: +49 7823 24-911 …

• Mitsubishi Daiya SRK63HE-S (23 pages) This air conditioner complies with EMC Directive 89/336/EEC, LVDirective 73/23/EEC.Ce climatiseur est conforme à la Directive EMC: 89/336/EEC, LVDirective 73/23/EEC.Dieses Kimagerät erfüllt die EMC Direktiven 89/336/EEC, LVDirektiven 73/23/EEC.Questo condizionatore d’aria è conforme alla Direttiva EMC: 89/336/EEC, LV Direttiva 73/23/EEC.Deze airconditi …

• Therma-Stor TS-388 (9 pages) 1www.thermastor.com • [email protected] 1-800-533-7533Phoenix Arctic MaxPN 4026850Owner’s Manual — Phoenix Arctic MaxInstallation, Operation and Service InstructionsRead and Save These InstructionsArctic MaxTS-388The new Phoenix Arctic Max is the first portable air condi-tioner designed specifically for the Restoration Industry. The Pho …

• Argo Ulisse 10 AUR101CL (35 pages) TECHNICAL DATA & SERVICE MANUALROOM AIR CONDITIONER WITH REMOTE CONDENSER- AUR101CL- AUR131CL- AUR101HLCOOLING ONLY VERSION (R407C)HEAT PUMP VERSION (R407C)0.8180.237.0 04/2002 …

Comments, Questions and Opinions: