Panasonic TC0938450-015CE Operating Instructions Manual

Text of Panasonic TC0938450-015CE User Guide:

• Operating Instructions 15 2 Monitor images on a cellular phone/mobile terminal Note  It is necessary to configure the network settings of the mobile terminal in advance to connect to the Internet and monitor images from the unit. ( section 13) 1. Access to “http://IP address/cam” *1 or “http://Host name registered in the DDNS server/cam”

• Panasonic TC0938450-015CE, 8 Operating Instructions 1 Monitor Images on a PC When “On” is selected for “User auth.”, the authentication window will be displayed before displaying live images for the user name and password entries. The default user name and password are as follows:  User name: admin  Password: 12345 IMPORTANT • To enhance the security, change the password for the user name “admin”. It is recommended to change this password periodically. • When displaying multiple H.264 images on a PC, images may not be displayed depending

• Panasonic TC0938450-015CE, 86 Operating Instructions 13 Configuring the network settings [Network] FTP periodic image transmission [FTP >>] When “FTP >>” is clicked, the [FTP] tab of the “Server” page will be displayed. (section 12.2 ) [FTP periodic image transmission] Select “On” or “Off” to determine whether or not to transmit images using the FTP periodic image transmission function. When “On” is selected, it is necessary to configure the settings of the FTP server.

• Panasonic TC0938450-015CE, 50 Operating Instructions 11 Configure the settings relating to the authentication [User mng.]  When the IP address already in use is entered and the [Set] button is clicked, the respective host information will be overwritten. [Access level] Select the access level of the host from the following. 1. Administrator/ 2. Camera control/ 3. Live only Refer to section 11 for further information about the access level.  Default: 3. Live only [Host check] From the pull-down menu of “Host check”, the registered host can be selected and the selected host’s IP address can be checked. The registered IP address will be displayed with the a

• Panasonic TC0938450-015CE, Operating Instructions 59 13 Configuring the network settings [Network]  On: Enter an IPv6 address manually.  Off: Manual entry of an IPv6 address will become unavailable.  Default: Off [IP address(IPv6)] When “On” is selected for “Manual”, manual entry of the IPv6 address is required. Do not enter an address already in use. Note  When connecting to the manually configured IPv6 address beyond the router, use an IPv6 compatible router and turn on the automatic IPv6 address assignment function. In this case, it is necessary to configure IPv6 address incl

• Panasonic TC0938450-015CE, 76 Operating Instructions 13 Configuring the network settings [Network] OS: Windows XP, Web browser: When using Internet Explorer 6 1. Access the unit using the HTTPS protocol. 2. Click “View Certificate”. Note  If this window is displayed when accessing a device other than the unit or a website, a security problem may have occurred. In this case, check the system status. 3. Click “Install Certificate...”.

• Operating Instructions 81 13 Configuring the network settings [Network]  Viewnetcam.com: Uses the “Viewnetcam.com” service.  Dynamic DNS Update: Uses Dynamic DNS Update (RFC2136 compliant) without the DHCP cooperation.  Dynamic DNS Update(DHCP): Uses Dynamic DNS Update (RFC2136 compliant) with the DHCP cooperation.  Default:

• Panasonic TC0938450-015CE, Operating Instructions 53 12 Configure the settings of the servers [Server] [Authentication]  Type Select the authentication method to send E-mails from the following. – None: It is not necessary to clear any authentication to send E-mails. – POP before SMTP: It is necessary to first clear the POP server authentication to use the SMTP server to send E-mails. – SMTP: It is necessary to clear the SMTP server authentication to send E-mails. – Default: None Note When you don’t know the au

• Panasonic TC0938450-015CE, 96 Operating Instructions 16 Number of users that can concurrently access the unit 16 Number of users that can concurrently access the unit The maximum number of users that can concurrently access the unit is 14, including users who receive H.264 images and users who receive JPEG images. (When “On” is selected for “Activation” of “Priority stream” on the [System] tab of the “User mng.” page.) The number of users that can concurrently access the unit may change according to the network e

• 26 Operating Instructions 7 Configure the basic settings of the unit [Basic] [Time display format] Select the time display format from “24h”, “12h” and “Off”. Enter the current hour reflecting this setting when entering the current time and date for “Date/time”. To hide time and date, select “Off”.  Default: 24h [Dat

• Panasonic TC0938450-015CE, Operating Instructions 21 6 Display the setup menu from a PC 6.2 How to operate the setup menu A Menu buttons B Setup page 1. Click the desired button in the frame on the left of the window to display the respective setup menu. When there are tabs at the top of the “Setup” page displayed in the frame on the right of the window, click the desired tab to display and configure the setting items relating to the name of the tab. 2. Complete each setting item displaye

• Operating Instructions 7 1 Monitor Images on a PC 1 Monitor images on a PC The following are descriptions of how to monitor images from the camera on a PC. 1.1 Monitor images from a single camera 1. Start up the web browser. 2. Enter the IP address designated using the Panasonic “IP Setting Software” in the address box of the browser.  Example when en

• Panasonic TC0938450-015CE, Operating Instructions 47 10 Configure the alarm settings [Alarm] [Additional alarm area data(VMD)] Determine whether or not to send notifications for the alarm area number of VMD alarm with the Panasonic alarm protocol by selecting On/Off.  Default: Off [Destination port] Select a destination port for the Panasonic alarm protocol from the following.  Available range: 1 - 65535  Default: 1818 The following port numbers are unavailable since they are already in use. 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670 [Retry times] Select a retry t

• Panasonic TC0938450-015CE, Operating Instructions 33 8 Configure the settings related to images [Image]  When “On” is selected for “H.264 transmission” in “H.264(1)” and “H.264(2)”, H.264 images are viewable using other devices with each setting.  When “On” is selected for “H.264 transmission” in “H.264(1)” or “H.264(2)”, the transmission interval of JPEG images may sometimes become longer. [Internet mode (over HTTP)] Select “On” when transmitting H.264 images via the Internet. It is possible to transmit H.264 images without changing the broadband router se

• Panasonic TC0938450-015CE, Operating Instructions 63 13 Configuring the network settings [Network] 13.2 Configure the HTTPS settings Click the [Network] tab on the “Network” page. (section 6 ) The settings relating to the HTTPS protocol that can enhance the network security by encrypting the access to units on this page. The HTTPS settings will be configured according to the following procedure: Generation of the CRT key (SSL encryption key) When using the self-signed certificate When using the server certificate Generation of

• Panasonic TC0938450-015CE, 62 Operating Instructions 13 Configuring the network settings [Network] Note  The unit will restart after the connection setting is changed.  When using the self-signed certificate: If the unit is accessed using the HTTPS protocol for the first time, the warning window will be displayed. In this case, follow the instructions of the wizard to install the self-signed (security) certificate. (section 13.3 )  When using the server certificate: In advance, install the root certificate and intermediate certificate on the bro

• Panasonic TC0938450-015CE, 48 Operating Instructions 11 Configure the settings relating to the authentication [User mng.] 11 Configure the settings relating to the authentication [User mng.] The settings relating to the authentication such as users and PCs restrictions for accessing the unit with a PC or cellular phone/mobile terminal can be configured on the “User mng.” page. The “User mng.” page has 3 tabs; the [User auth.] tab, the [Host auth.] tab and the [System] tab. 11.1 Configure the settings relating to the user authentication [User auth.] Click the [User auth.] tab on the “User mng.” page. (section 6 )

• Panasonic TC0938450-015CE, 88 Operating Instructions 13 Configuring the network settings [Network] 13.7.2 How to delete the set schedule 1. Uncheck the check box of the set day of the week. 2. Click the [Set] button after completing the settings.  The schedule of the selected day of the week is deleted.

• Operating Instructions 91 14 Configure the settings relating to the schedules [Schedule] 1. Select an action to be assigned to the schedule from “Schedule mode”. “Off” is selected at the default.  Off: No action will be taken for the respective schedule.  VMD permission: The video motion detection (VMD) function will be active during the period

• Panasonic TC0938450-015CE, Operating Instructions 69 13 Configuring the network settings [Network]  When the [Delete] button is clicked, the installed server certificate will be deleted.  When “HTTPS” is selected for “Connection”, it is impossible to delete the server certificate.  To change (or update) the server certificate, perform step 1 and 2. IMPORTANT  Before deleting the valid server certificate (security certificate), confirm that there is a backup file on the PC or another media. The backup file will be required when installing the server certificate again.  When the server certif

• Panasonic TC0938450-015CE, 108 Operating Instructions Appendix A – Introduction to Thermal Imaging Appendix A – Introduction to Thermal Imaging A thermographic camera or infrared camera is a device that forms an image using infrared radiation, similar to a common camera that forms an image using visible light. Instead of the 450–750 nanometer range of the visible light camera, infrared cameras operate in wavelengths as long as 14,000 nm (14 µm). A.1 Light Basics In order to understand thermal imaging, it is important to understand something about light. The amount of energy in a light wave is related to its wavelength

• Panasonic TC0938450-015CE, Operating Instructions 93 15 Maintenance of the unit [Maintenance] [Model no.], [MAC address], [Serial no.], [Firmware version], [IPL version], [HTML version], [IP address(IPv6)], [Viewer software installation counter] Information of each item will be displayed. 1. Download the latest software to the hard disk of the PC (contact your dealer for applicable firmware support). IMPORTANT  A blank (space) cannot be used for the name of the directory where the downloaded firmware to be saved. 2. Click the [Browse...] button and designate the downloaded firmware. 3. Click the radio button respective to the desired option to determine whether or not to initializ

• Panasonic TC0938450-015CE, Operating Instructions 107 19 Troubleshooting H.264 images are not displayed. • When “Network Camera View 4S” is deleted from a PC on which both the viewer software “Network Camera View 3” and “Network Camera View 4” are installed, H. 264 images may not be displayed. In this case, delete “Network Camera View 3” from the PC and then install “Network Camera View 4S”. - The connected camera cannot be controlled. • Confirm that the RS485 settings match those required for the Thermal Camera 8.5 Image is grainy or shows little detail • This can be a result of weather conditions. The Thermal Camera

Related Products and Documents (Thermal cameras):

Comparable Devices:

Similar Resources:

• TESTO 870 (2 pages) 1 2 Element Function 1 Display Shows infrared and real images, menus and functions 2 Interface terminal Includes micro USB interface for power supply and connection to a computer 3 - button - Esc button - Switch camera on and off - Cancel action 4 - OK button - Joystick - Open menu, select function, confirm setting - Navigate in menu, …

• IriSys IRI 1020 (15 pages) IPU 40151 Issue 1 1 of 16 IRISYS Universal Thermal Imager Type IRI 1020 User Manual Safety Warning. The equipment described in this document uses a Class 2 laser. Under no account should anyone look directly into the laser beam or the laser beam exit aperture, irreversible damage to the …

• Fluke Ti400 (2 pages) ………………………………………………………………………………………………………………………………………………QuickStart FLUKE Ti400/450/300/200© 2016 The Snell Group / 322 N. Main St. / Suite 8 / Barre, VT 05641 / 800.636.9820 / www.thesnellgroup.comAC Power, USB, Mini USBLaser Assisted Focus Tr …

• Guide Sensmart D384M (91 pages) Thank you for choosing our product. Please thoroughly go through user manual befor operation and keep it well for future reference. All photoes here are for reference only, and specifications are subject to the phisycal product.ਕ៘৥᠓˻ఴֵ̖Ὃឯڙ΍ၸґ᫝ឳ൤ឬ௙˹Ὃ᫝ឳՐឯ࠴ॶஅᘨὋ̾ܫ௅Րಉ᫝njڎྞ̨ΘԟᏥὋֵ̖̾ࠃྫྷ˝э …

• FLIR HM-Series (38 pages) HM-SeriesThermal Night Vision CameraOperator’s ManualDocument Number: 432-0004-00-10Revision: 100January 2010HM_Series_Operators.book Page i Wednesday, January 27, 2010 9:56 AM …

• Satir JK362-PoE (12 pages) JK362-PoE User’s manual Trademark Acknowledgments • SATIR is a trademark of SATIR Ltd. • Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies. Copyright © 2013 SATIR Ltd. All rights reserved. Surveillance Thermal Camera …

Comments, Questions and Opinions: