AKCP HSUPA 3G Modem Setup Manual
|
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 19 - 3G Modem installation for PC/Server Windows will detect the device connected to the USB port, and install it. There is a virtual CD drive on the modem, which contains the driver files. Let the autorun.exe start to begin the installation: Wait for the setup wizard to finish:
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 11 - On the next screen you can setup the Maximum Times to Resend which is 5. You can also set the Resend Intervals and the Resend on Server Timeout in case there was a problem connecting to the GSM service. Clicking on the “Finish” button will save your new SMS action, and complete the wizard. You will now see the new SMS action in the action list as shown above. You can test it to make sure it is working correctly by first highlighting the action, then clicking
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 2 - Table of Contents Introduction .......................................................................................................... 3 Modem setup guide for securityProbe units ......................................................... 4 Connecting the 3G modem to your securityProbe ............................................... 6 Basic notification setup for securityProbe (SMS) ................................................ 7 3G data connection settings for securityProbe .................................................. 12 Connection mode ..........................
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 28 - You can customize the SMS message to be sent. The From $[IP] is an example of a macro description named $[IP]. In the actual sms message, the value of it will depend on the IP address of the host sending the notification. If you wish to preview your message, click the ‘Preview’ button.
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 15 - You may change the Connection Type: • On-Demand: the unit will initiate a connection only when it’s necessary for sending out the notifications. • Always On: the unit will keep the connection up, even when there is nothing to send. You can always view the current connection’s status on this page.
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 26 - First, we need to create a notification action and then create a notification rule to link the action to a sensor and status conditions. To create a notification Action, Click on the Actions tab under Notifications and click the ‘Create’ button. A Create Action dialog window will appear. In the Create Action Dialog window, you will see a list of notification actions. Select the SMS action and click �
HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 36 - After setting the calendar, you have the option to include an escalation that will trigger after a given time after the initial notification. If you wish, you may add it later from the Notification Rules list page. Click ‘Finish’ to create the notification rule. You n
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 9 - After you have finished adding the mobile numbers to the call list click the “Next” button as shown above. In the next screen of the SMS action wizard will show the SMS message that will be sent. Or you can click on the “Customized” button and edit the text that will be sent. After you’re finished, click on the “Next” button.
HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 34 - You can set up the notification rule wherein it will only execute when a certain status will persist in the specified continuous time (in seconds). This feature allows us to filter the real threats from false alarms because of possible fluctuations th
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 10 - In the screen above you will select the modem port from the drop down list. For the HSUPA 3G USB modem you will choose “USB Modem”. You should also note the wording “(Not Connected)” is hidden after the USB Modem. This means that the unit does detect the modem is connected to the USB port. If you see this wording after the USB Modem, then there is a problem with the connection. You should check the cable or try connecting the modem directly to the USB port. You can leave the por
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 14 - You may change the Connection Method as follows: • Never Dial Out (Use Ethernet only): the unit will never try to use the modem for sending out notifications. If you don’t have Ethernet connection, you should change this setting; otherwise you won’t get any notifications. • Dial-Out if Ethernet failed: the unit will only use the modem for sending out notifications, if the Ethernet connection fails. • Use
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 3 - Introduction The HSDPA USB 3G Modem provides global wireless access to the Internet and email on GSM / GPRS / EDGE / 3G capable networks. With this modem, your securityProbe unit can connect to the Internet using your local GSM, GPRS, EDGE or 3G services. The HSDPA USB 3G Modem takes DC power directly from its USB interface, so no charging device or external AC/DC adapter is required. The AKCP HSUPA 3G USB Modem is ready to use by simply connecting its USB interface to your securityProbe’s USB port. The HSUPA 3G USB Modem can
HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 22 - After the setup completes, it will start the configuration program for the modem: You can also configure the modem’s 3G network settings with this utility.
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 4 - Modem setup guide for securityProbe units What you’ll need: AKCP HSUPA 3G USB Modem Note: The modem has no External Antenna – it’s not recommended for use in areas with weak signal. To confirm compatibility in your country, and for a comprehensive listing of the GSM \ GPRS networks available and the frequencies that they use, visit http://www.mobileworldlive.com/maps/ Mobile Service Provider SIM Card You will need to purchase a SIM card from your local mobile service provider that you will
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 5 - SecurityProbe 5ESVA Back view Note: All securityProbe devices have a similar back view; just find the USB port located near the Eth 10/100 LAN interface. This is where you would connect the HSUPA 3G modem. Note 2: The modem only works with the securityProbe 5ES series with the iMX25 CPU. Note 3: The 3G Modems are compatible only with securityProbes shipped after the 25th of March, 2014. There is no visual way of telling
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 13 - You may select a different Connection Mode (PAP/GPRS/RAS). The most commonly used mode is GPRS Unsecured.
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 31 - “Number of Times to Repeat” is the number of times the SMS message will be sent. “Repeat Intervals” is the time interval in seconds between the resent SMS messages. In this example, we only want to receive one SMS message so we will set the “Number of Times to Repeat” to 0. You can click the ‘Back’ button to change any previous configuration. Click the ‘Finish’ button to create the SMS Notification Action.
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 18 - Connecting the 3G modem to your PC/Server Step 1: Connect the 3G modem to the PC/Server’s free USB port, as shown in the picture above (it also works with a USB extender cable). It will be automatically detected by Windows, and show the setup program for the driver installation. See below for a guide on installing the drivers. Step 2: Configure the notification settings in the AKCess Pro Server. See below for the
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 17 - Free USB port Note: Front panel USB ports usually provide less power than the ones in the back. We advise you to connect the USB modem to one of the back ports of your machine, especially if you’re using a USB extender cable. The 3G modem doesn’t have a high power requirement, but it would provide a better performance in one of the back ports.
AKCP HSUPA 3G Modem, HSUPA 3G Modem Setup Manual Updated until firmware 404z & AKCess Pro Server 11.1.0 - 24 - Basic notification setup for AKCess Pro Server (SMS) Please note: the HSUPA 3G modem doesn’t support voice alert notifications. When the device is connected and successfully configured, you can start AKCess Pro Server: We will show you how to set up an SMS notification when the ‘host status’ virtual sensor goes offline using the 3G modem. The modem will be connected to the USB port of the test machine where AKCess Pro is installed. After setting up this notification, you should be able to receive a text message from AKCess Pro informing yo
Atlantis Land Web Runner 56K V.90/V.92 A01-PE1 Modem Specifications
Web Runner 56K V.90/V.92 A01-PE1 |
Huawei BM325 Modem Quick start manual
BM325 |
NETGEAR DM602 - ADSL-Modem - 8 Mbps DSL Modem Modem Installation manual
DM602 - ADSL-Modem - 8 Mbps DSL Modem |
Patton electronics 1186RC Modem Operation & user’s manual
1186RC |
Cisco 2600 Series Modem Appendix
2600 Series |
ActionTec GT724WG Modem Specifications
GT724WG |
ADTRAN ISU 2X64 Modem Specifications
ISU 2X64 |
Topcom 136 Modem Quick installation manual
136 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Facom | CL3.CH1018 943607 | Original instructions manual | facom/cl3ch1018-943607-L41.pdf | 06 Aug 2023 | 23 | |
2 | ROBLIN | ECLAT 900 | Instructions for installation manual | roblin/eclat-900-477.pdf | 29 May 2023 | 52 | 1.25 Mb |
3 | Sony | KDL-46EX523 | Specifications | sony/kdl-46ex523-553.pdf | 03 May 2023 | 4 | 0.2 Mb |
4 | Hasbro | G.I. Joe Ripattack | Instructions | hasbro/g-i-joe-ripattack-46Y.pdf | 18 Jul 2022 | 1 | 1.86 Mb |
5 | Ford | 2005 Five Hundred | Owner's manual | ford/2005-five-hundred-S95.pdf | 25 Jan 2024 | 264 | |
6 | HP | v229g | Specifications | hp/v229g-9NV.pdf | 04 Aug 2022 | 1 |
U.S. Converters
1 Serial WiFi adapter – Industrial Part no. WF5000B The WF5000B is a light-industrial grade serial RS232 to WiFi adapter which can be used to connect any standard RS232 serial device to a computer over an open or secure wireless network. It has a strong …
WF5000B(3 pages) |
Wigersma & Sikkema
EU Declaration of Conformity and safety instructions EU Conformiteitsverklaring en veiligheidsinstructies Battery operated UNILOG 300 UNILOG 300 met batterijvoeding
…
UNILOG 300(8 pages) |
Alotcer
AD2000 IP Modem SpecificationTel:+86 592-6195619 Fax:+86 592-6195620 E-mail:[email protected] Page1of43Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.AD2000 IP Modem User ManualSupport 2G/3G/4G Data Transfer UnitXiamen Alotcer Communication Technology Co., Ltd.Tel:+86 592-6195619Fax:+86 592-6195620Web:en.alotcer.comE-mail:a …
AD2000-G(43 pages) |
Aiwa
S E R V I C E M A N U A LSIMPLE MANUAL• Replace this Service Manual with ”Revision Publishing” when it is issued.PV-BF5605• TYPE: DS/M Code No. 09–98A–308–20AMODEM
…
PV-BF5605(7 pages) |
Comway
WG8010 Cellular IP Modem User Guide WG8010 Cellular IP Modem User Guide Contact information, support For general contact, technical support, to report documentation errors and to order manuals visit: www.comway.com.cn Page 1 of 18
…
WG8010(18 pages) |
Victron energy
2018-12-07 16:41 1/6 GX GSMVictron Energy - https://www.victronenergy.com/live/GX GSM1. IntroductionThe GX GSM is an accessory for Venus-devices. It is a cellular modem; providing a mobile internet forthe system and connection to Victron Remote Management (VRM).It requires a full sized SIM card; and connects to the Venus-device with a (supplied) 1m USB cable …
GX GSM(6 pages) |
Jenn-Air Grill 38”#YP6KLE: 38” Grill Use and care manual 38”, 19 |
Samsung Cell Phone SGH-C238Samsung SGH-C238 Cell Phone Operation & user’s manual SGH-C238, 70 |
CognitiveTPG Printer Advantage RFID Thermal PrinterAdvantage RFID Thermal Printer (Printer ePDF Manual, #74O3J7) Advantage RFID Thermal Printer, 80 |
Panasonic Stereo System SC-CH150Stereo System PDF Operating instructions manual SC-CH150, 48 |
Casio Digital Camera QV-5700User Manual: Casio QV-5700 (YD129Q, Upd.Wednesday 06-09-2023) QV-5700, 53 |
LevelOne Network Router FSW-1640TXNetwork Router Operation & user’s manual (LevelOne FSW-1640TX) FSW-1640TX, 35 |
Splendide Washer/Dryer 2000SSplendide Washer/Dryer 2000S Reference manual 2000S, 2 |
Niles TV IPC-6#Z191K5: IPC-6 TV Installation & operating manual IPC-6, 10 |
Mitsubishi Projector X50PDF Guide (@JSQKX8), Mitsubishi X50 Projector (Monday 21-08-2023) X50, 28 |
Sears Cooktop C970-5121Sears C970-5121 Manual (Factory parts catalog), @4Z19Q8 C970-5121, 11 |
Pioneer CD Player DEH-P4400R#X6HI59: DEH-P4400R CD Player Operation manual DEH-P4400R, 128 |
Veo Webcam Velocity ConnectWebcam Operation & user’s manual (Veo Velocity Connect) Velocity Connect, 44 |