Manualios.com

ASTRO WM-3209 Instruction Manual

ASTRO WM-3209 Manual Online:

4.15, 1063 votes
ASTRO WM-3209 User Manual
ASTRO WM-3209 User Guide
ASTRO WM-3209 Online Manual

Text of ASTRO WM-3209 User Guide:

  • ASTRO WM-3209, Chapter 7 Maintenance, etc. 239 I want to check the parallax of 3D image sources. Select the Overlap display in Compare Mode 1. The images of two inputs are combined and displayed, enabling the parallax in the left-eye and right-eye images to be checked. To view difference quantitatively, use marker to see the exact value of pixels or percentage compared to the total H active pixel. It is possible to see view difference of motion picture, by setting compare 3D ON or input channel DUAL LINK. (Refer to "5.18 3D i

  • ASTRO WM-3209, 22 • Hierarchical MENU Screen Image • Setting Method 1. Align the cursor with INPUT_CHANNEL and press the Adjustment Dial. 2. When the cursor is aligned with the item whose setting is to be changed and the adjustment dial is pressed, the setting is changed. 3.4.3 ID SETTING These setting items are used to set the IDs of the input channels (SDI_A1 to SDI_B1, Composite, dual link) as described in the table below. Setting Item Description Default DISPLAY ON: Displays the channel IDs. OFF: Hides the display of the channel IDs. ON ID Select (*1) Internal: Displays the ID set with Intern

  • ASTRO WM-3209, 118 4.12 Compare Mode 1 Enter Compare Mode 1 by setting the mode switch to COMPARE_1. This mode simultaneously displays the currently selected channel (Owner CH) and the channel to be compared to (Another CH). Either Overlap display or Vertical display can be selected. When the Overlap display has been selected, various checks can be performed on the stereoscopic images. • Function Indicator Contents (*) This is displayed only when x2 or x4 has been set for the F5:MAG set

  • ASTRO WM-3209, 10 *4: RS485 connector (Number (12)) Pin No. Description 1 TXD+ 2 TXD- 3 RXD+ 4 GND 5 GND 6 RXD- 7 NC 8 NC This remote controller connector is used for ID input. (Mounted only with the WM-3209-L) One terminal is used for control signal input. When a terminal is used for control signal input, the other is used as a through-output terminal. <Case 1> <Case 2> Through-out RS485 control signal 8 1 8 1 RS485 control signal Through-out

  • ASTRO WM-3209, Chapter 4 Description of Each Mode 77 • Function Indicator Contents Function Indicators Related to DISPLAY *1: This cannot be selected when 4Parade, Composite or Composite7.5IRE is selected. *2: This cannot be selected when Composite or Composite7.5IRE is selected. Function Indicators Related to SWEEP F2: SWEEP F1: 1H F5: 1H and 1V F3: 1V Level 1: Level 2: F4: None F2: None Level 1: Level 2: F1: DISPLAY F1: Parade/Overlay/Composite = 3Parade/4Parade /Overlay/ Composite/ Composite7.5IRE F2: Y/G/R (*1) = Y (when YPbPr h

  • ASTRO WM-3209, Chapter 3 Method of Operation 21 3.4.2 INPUT CHANNEL These setting items are used to set the input channels (SDI_A1 to SDI_B1, Composite, dual link) as described in the table below. Setting Item Description Default SDI_A Enable: Allows input SDI A1 to be selected as the input channel. Disable: Disables the selection of input SDI A1. (*1) Enable SDI_B Enable: Allows input SDI B1 to be selected as the input channel. Disable: Disables the selection of input SDI B1. (*1) Enable COMPOSITE Enable: Allows input Composite to be selected

  • ASTRO WM-3209, Introduction vii • Directly hitting or striking the liquid crystal panel may result in cracking. • Do not disassemble the liquid crystal panel as it is dangerous if liquid crystals leak and get on the skin.  Handle the liquid crystal panel with care. If fingerprints or other soiling gets on the liquid crystal protective panel, wipe clean with a cleaner intended for use with office equipment. Wiping forcefully may lead to scratching or damage to the protective panel. Concerning the Shock of Impact  Because this product is a precision device, applying shock to it may cause damage. Be extra careful when

  • ASTRO WM-3209, Chapter 3 Method of Operation 41 3.4.10 WAVE Make waveform settings. Setting items are as follows. Setting Item Description Default Vanc ON: Display the V_ANC waveform using raw data. OFF: Display the V_ANC waveform as black. OFF H Blank ON: Display the H_Blank waveform using raw data. OFF: Displays the H_Blank waveform as black. OFF Scale %: Displays scalar as a percent. V: Displays scalar as mV. Non: Does not display scalar. % Filter Non: Does not filter the waveform. LPF: Applies a

  • ASTRO WM-3209, Chapter 4 Description of Each Mode 101 4.10.1 Multimode 1 This mode simultaneously displays audio (for channels 1 through 8), time code, Y waveform, and picture. Functions Assigned to GAIN (WAVE), 1H/1V, GAIN (VECTOR) and LineSelect Setting Item Description Default GAIN (WAVE): (*1) Sets the multiplication factor for the waveform. ×1: Sets standard size. ×5: Sets five times standard size. Val: Adjust from ×0.03 to ×7.97 times standard size. ×1 1H/1V: (*2) Waveform display width setting 1H: Displays the waveform at 1H width. 1V: Displays the waveform at 1V width. 1H G

  • ASTRO WM-3209, Chapter 5 Specifications 221 PICTURE Setting Item Settings and Adjustable Ranges Default Half Mask ON / OFF OFF Mask ON / OFF OFF OverlayPic ON / OFF ON OvPic Size Normal / Small Small WAVE Setting Item Settings and Adjustable Ranges Default Vanc ON / OFF OFF H_Blank ON / OFF OFF Scale (Waveform) % / V / Non % Filter (Waveform) Non / LPF / Average LPF Skelton Non / HALF / FULL FULL PtoP_Line ON/OFF ON VECTOR Setting Item Settings and Adjustable Ranges Default Scale (Vector) 100% / 75% 100% Filter (Vector) LPF / Non / Average LPF MAG Guide ON/OFF OFF AUDIO Setting Item Settings and Adjustable

  • ASTRO WM-3209, 214 5.20 Concerning checking 3D image using the anaglyph system Three-dimensional (stereoscopic) images can be checked by selecting the Anaglyph display function on the Overlap display in Compare Mode 1. At 3D production sites using actually shot images, this makes it possible to check the sense of depth and other aspects easily without having to carry in a bulky 3D monitor to the location. Special eye-glasses (red for the left eye and cyan for the right eye) are required to view stereoscopic the images. Example: Selecting the anaglyph display function, and inputt

  • ASTRO WM-3209, 56 3.4.16 HARDWARE SETTING The hardware-related settings are selected in this section. Setting items are as follows. Setting Item Description Default GoToPowerSave (*1) The low-power-consumption mode is established. None Auto Timer (*1) Non: Operation does not transfer to the low-power-consumption mode. 1 minute: Enters POWER SAVE mode when front panel switches have not been operated for one minute. 5 minutes: Enters POWER SAVE mode when front panel switches have not been operated for five minutes. 10 minutes: Enters POWER SAVE mode when front panel

  • ASTRO WM-3209, Chapter 3 Method of Operation 39 3.4.9 PICTURE Set functions for handling the displayed video image. Setting items are as follows. Setting Item Description Default Half Mask (*1) ON: Half masks (uses half brightness for) everything outside the 4:3 area when using HD input. OFF: Does not mask OFF Mask (*1) ON: Black masks (displays as black) everything outside the 4:3 area when using HD input. OFF: Does not mask OFF Mono ON: Displays the picture image in monochrome. OFF: Does not display in monochrome. OFF Blue Only ON: Displays the picture image in blu

  • Chapter 3 Method of Operation 55 • Hierarchical MENU Screen Image ! ” # $ % & ’ ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ ` a b c

  • ASTRO WM-3209, Chapter 3 Method of Operation 25 Disp2 Size Customize the Disp 2’s display size of the display difference simulation of Display 1 compare mode. 100 inch Disp2 Aspect 4:3 : Set aspect ratio of Display 2 to 4:3. 16:9 : Set aspect ratio of Display 2 to 16:9. 2.35:1:Set aspect ratio of Display 2 to 2.35:1. 4:3 Unit cm: Set unit of display difference simulation to cm . inch: Set unit of display difference simulation to inch. cm *1: The monitor's specifications are such that when the selected signal has a format which differs from the format of the signal input before this item was set, th

  • Chapter 4 Description of Each Mode 81 4.6 Status Mode Enter Status Mode by setting the mode switch to STATUS. The input signal is displayed as raw data. The line and sample of the data you want to view can be selected. Select the value you want to move using Line/Sample and adjust by turning the Adjustment Dial. Jump function is available to d

  • ASTRO WM-3209, Chapter 5 Specifications 161 5.2 Input Signal System SDI Input Specifications Specifications 3GTV Conforms to SMPTE 425M, NRZI SDI signal HDTV Conforms to BTA S-004B, SMPTE 292M, NRZI SDI signal SDTV Conforms to SMPTE 259M, NRZI SDI signal SDI input Field (frame) rate, automatic tracking of 60.00/59.94[Hz] Capable of automatically tracking the input format Cable extension up to 100 meters possible (For the 3G TV signals, use the Belden 1694A 100-meter cable or its equivalent.) Part of SMPTE 372M standard complied with, NRZI SDI signal input of 2 lines, 10-bit/12-bit input s

  • ASTRO WM-3209, 184 5.11 Concerning the Dummy Composite Waveform Display This unit can convert HD-SDI signals, SD-SDI or dual link signals into composite waveforms, and display them. This function is called the dummy composite waveform display function. Either the COMPOSITE or COMPOSITE7.5IRE display can be selected using the DISPLAY function in the waveform mode. For details on how to select COMPOSITE and COMPOSITE7.5IRE, refer to “4.4 Waveform mode.”  Concerning displaying the COMPOSITE dummy composite waveforms HD-SDI signals, SD-SDI or dual link signals are converted into composite waveforms, and displayed. Used for conversion into the waveforms is the following ge

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Bpt PEC/01 Installation manual bpt/pec01-L4O.pdf 10 Sep 2022 8
2 Pearstone VT-2000 Operation & user’s manual pearstone/vt-2000-1TK.pdf 23 Mar 2024 4
3 Panasonic SA-DX940 Operating instructions manual panasonic/sa-dx940-4Q8.pdf 26 Oct 2022 40
4 Amarra MINI Computer Music Player Operation & user’s manual amarra/mini-computer-music-player-RC2.pdf 17 Mar 2024 23
5 Haier SD-319G Instruction haier/sd-319g-D13.pdf 21 Jun 2023 4 3.89 Mb
6 Powermat Home & Office Mat Owner's manual powermat/home-office-mat-B71.pdf 06 Oct 2023 52

Similar Resources:

  • Eizo

    FlexScan S2000

    (7 pages)
    1㩆቗⪞⨲ⳮ#ጚ㬢Ⲵ#♤῅♜⬐♜។#ᠤⲌሼ#ᅙⲀ#⪈ⵄ#㦜⠜Ẽ#◬⯩㪩᠈ᠤ1#ᅁ#㦜⠜។#⹑⯔㪜#ⵕ∴Ẽ#ᗘ㘀ᗴ℀ᶜ#⸼Ⲙ#ᎊᇌ#ⲽⱼ⠭⠜⭤1ᆧᇊᇽሠᶜ#㦜⠜ᥜ#ᗴ⯩Ⲅ#ᩰẴ⼀#⪊Ⲅ#ᇽ⯰#⠬ᅁ㪜#⋀☁Ⲅ#ⳅᆰᗘ#☝῅Ⲙ#ⱄ㭑Ⲅ#⅛Ⲅ#❘#Ⳉ⟵᠈ᠤ1#ⷦⱂ⸼Ⲙᶜ#㦜⠜ᥜ#ᗴ⯩Ⲅ#ᩰẴ⼀#� …
  • AOC

    QDI TFT1780PSA

    (34 pages)
    17” LCD Color Monitor QDI TFT1780PSA 1 Service Service Service …
  • LG

    27HJ710S

    (45 pages)
    OWNER’S MANUAL27HJ710SIPS LED MONITOR(LED Monitor*)Please read this manual carefully before operating your set and retain it for future reference.* LG LED Monitor applies LCD screen with LED backlights.www.lg.comCopyright ⓒ 2019 LG Electronics Inc. All Rights Reserved. …
  • AG Neovo

    X-19

    (2 pages)
    www.agneovo.comX-19A versatile display that combines hard glass protection and multiple video inputs with a distinctive metal design for modern professional environments.Much more than a desktop monitor, the X-19 is a high-resolution 19” display with NeoV™ Optical Glass that protects the display from scratches, accidents, and incidental damage. A removab …
  • HP

    C7791C - DesignJet 130 Color Inkjet Printer

    (7 pages)
    HP LF Printing Knowledge Center Proof a press with CMYK Application: Adobe InDesign CS Printer: HP Designjet 30/90/130 series Software: HP Driver Operating System: Windows …
  • AOC

    619Fh

    (1 pages)
    619Fh619FhCabinet Color Piano Black FinishPanel TFT Active Matrix LCD26" Widescreen, Diagonal25.5" Viewable Image SizePixel Pitch0.2865mm x 0.2865mmDisplay Area550mm x 344mmBrightness 400 cd/m2 (typ)Contrast Ratio 10,000:1 (dynamic)Response Time 3ms (typ)Viewing AngleHorizontal: 160 Degrees (CR>10)Viewing AngleHorizontal: 160 Degrees (CR>10)V …

Comments, Questions and Opinions: