Siemens CCIC1410 Configuration Manual

Text of Siemens CCIC1410 User Guide:

• Siemens CCIC1410, Directives and standards 9 Siemens Building Technologies Fire Safety & Security Products 05.2009 2.1 National restrictions The CCIC1410-LAW can be operated in the following European countries: AT, BE, BG, CH, CY, CZ, DK, DE, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT, LV, LI, LT, LU, MT, NL, NO, PL, PT, RO, SE, SK, SI, TR. The unit operates on frequencies that are approved for use in the European Union. When used outside the EU, the national regulations for the use of frequencies must be observed.

• Siemens CCIC1410, Index 94 Siemens Building Technologies Fire Safety & Security Products 05.2009 12 Index A Access information page 35 Administrator’s password 26 C CMOS characteristics 7 D Data encryption 32 WEP 32 WPA-PSK 33 Date and time set up ~ 27 Daylight saving time 48 DHCP 29 DTS Siehe Daylight saving time H Host name 26, Siehe network camera Change ~ 26 HTTP 39 I IP fixed ~ 29 L LAN setting 28 N Network camera name of ~ 47 Network setting See LAN setting P PPPoE password 27

• Siemens CCIC1410, Accessing the video streams 87 Siemens Building Technologies Fire Safety & Security Products 05.2009 10 Accessing the video streams This chapter explains how to access the video streams through web browsers, RTSP players, 3GPP-compatible mobile devices. For accessing the video streams via SIEMENS digital recorders SISTORE MX HVR/NVS, please refer to the respective manuals. 10.1 Via the CCIC1410 Installation Wizard 1. Open the CCIC1410 Installation Wizard (see chapter 8.2). 2. Double click a device in the device list. Î The CCIC1410 Homepage appears. 3. Choose the menu item Live Player Web. Î The Live Player shows

• Siemens CCIC1410, Upgrade firmware 91 Siemens Building Technologies Fire Safety & Security Products 05.2009 Î In the Selected devices information section, you will see tabs with IP addresses if more than one device was selected. Î Firmware version: The version number of the selected firmware. 3. Use the Select firmware button to select the file that you want to upload to the selected device(s).

• CCIC1410 Installation Wizard 32 Siemens Building Technologies Fire Safety & Security Products 05.2009 channel must be set to the same channel for each wireless adapter. The default channel setting depends on the regional settings. z Encrypt You can choose the desired encryption type in the pull-down menu. There are three options: None, WEP and WPA-

• Siemens CCIC1410, Configuration with the CCIC1410 Homepage 44 Siemens Building Technologies Fire Safety & Security Products 05.2009 9.4 The live video window of the CCIC1410 Homepage 9.4.1 Live video window of CCIC1410 Homepage with MPEG4 mode The following window is displayed when the video mode is set to MPEG4: 1 MPEG4 protocol and media options: The transmission protocol and media options for MPEG-4 video streaming. 2 Date: Display of the current date. 3 Time: Display of the cu

• Siemens CCIC1410, Configuration with the CCIC1410 Homepage 50 Siemens Building Technologies Fire Safety & Security Products 05.2009 9.5.3 Digital input and digital output 1. Open the CCIC1410 Homepage (see chapter 9.1). 2. Choose the Configuration menu. 3. On the left hand side, choose the menu item System. 4. Define your digital input and digital output settings. 5. Click Save. Option Description Digital input Select "high" or "low" to define normal status of the digital inp

• Siemens CCIC1410, Configuration with the CCIC1410 Homepage 41 Siemens Building Technologies Fire Safety & Security Products 05.2009 9 Configuration with the CCIC1410 Homepage The CCIC1410 Homepage helps you viewing your live videos. It is displayed in your web browser. 9.1 Opening the CCIC1410 Homepage Using the CCIC1410 Installation Wizard 1. Open the CCIC1410 Installation Wizard (see chapter 8.2). 2. Double click a device in the device list. Î The user interface of the CCIC1410 Homepage appears. Using your Web Browser 1. Launch your web browser (e.g. Microsoft® Internet Explorer, Mozilla Firefox or Netscape). 2. Enter the IP address of the network camera in

• Siemens CCIC1410, Configuration with the CCIC1410 Homepage 46 Siemens Building Technologies Fire Safety & Security Products 05.2009 9.4.2 Live video window of CCIC1410 Homepage with MJPEG mode The following window is displayed when the video mode is set to MJPEG. 1 MJPEG protocol and media options: The transmission protocol and media options for MJPEG video streaming. 2 Date: Display of the current date. 3 Time: Display of the current time. 4 Video and audio control buttons: Depending on the network camera model and network camera configuration, some buttons may not be available. Video title The v

• Siemens CCIC1410, CCIC1410 Installation Wizard 24 Siemens Building Technologies Fire Safety & Security Products 05.2009 8.3 User interface of the CCIC1410 Installation Wizard On the left side, several function buttons are situated, e.g. the Manual Setup button, etc. When you click on the arrow button, you will see more advanced functional buttons. 8.3.1 Select a device for the configuration 1. Open the CCIC1410 Installation Wizard, see chapter 8.2. 2. Select a device in the device list by clicking on it. Î The three buttons on the left (“Manual Setup”, “Firmware Upgrade”, and “Restore Default”) wi

• Siemens CCIC1410, Configuration with the CCIC1410 Homepage 80 Siemens Building Technologies Fire Safety & Security Products 05.2009 z Server name: Enter a descriptive name for the server. There are four server types available: – Email – FTP – HTTP – Alarm Sever z Server Type: – E-mail: Select to send the media via email when a trigger is activated. Î Sender email address: Enter the email address of the sender. Î Recipient email address: Enter the email address of the recipient. Î Ser

• Siemens CCIC1410, Configuration with the CCIC1410 Homepage 59 Siemens Building Technologies Fire Safety & Security Products 05.2009 Multicast settings for stream 1 / Multicast settings for stream 2: Select Always multicast to enable multicast for stream 1 or stream 2. Unicast video transmission delivers a stream through point-to-point transmission; multicast, on the other hand, sends a stream to the multicast group address and allows multiple clients to acquire the stream by requesting a copy from the Multicast group address. The five ports can be changed between 1025 and 65535. The multicast

• Siemens CCIC1410, Configuration with the CCIC1410 Homepage 67 Siemens Building Technologies Fire Safety & Security Products 05.2009 – Saturation: Adjust the image saturation level, which ranges from -5 to +5. The default value is set to 0. – Contrast: Adjust the image contrast level, which ranges from -5 to +5. The default value is set to 0. – Sharpness: Adjust the image sharpness level, which ranges from -3 to +3. The default value is set to +3. – White balance: Adjust the value for best colour temperature. "Auto" – The n

• Siemens CCIC1410, Configuration with the CCIC1410 Homepage 60 Siemens Building Technologies Fire Safety & Security Products 05.2009 Wireless mode: Click on the pull-down menu to select from the following options: z Infrastructure: The network camera is connected to the WLAN via an Access Point (default setting). z Ad-Hoc: The network camera is connected directly to a host equipped with a wireless adapter in a peer-to-peer environment. Channel: While in infrastructure mode, the channel is selected au

• Siemens CCIC1410, Configuration with the CCIC1410 Homepage 53 Siemens Building Technologies Fire Safety & Security Products 05.2009 9.7 Network connection settings 9.7.1 Network type 1. Open the CCIC1410 Homepage (see chapter 9.1). 2. Choose the Configuration menu. 3. On the left hand side, choose the menu item Network. 4. Define the settings. 5. Click Save. LAN Select this option when the network camera is deployed in a local area network (LAN) and is intended to be accessed by local computers. Get IP address automatically Selec

• Configuration with the CCIC1410 Homepage 51 Siemens Building Technologies Fire Safety & Security Products 05.2009 9.6 Security 9.6.1 Root password The administrator account “root” is permanent and cannot be deleted. NOTE If you want to add more accounts, you must apply a password for the “root” account first. 1. Open the CCIC1410 Homepage (see chapter

• Siemens CCIC1410, Description of the equipment 17 Siemens Building Technologies Fire Safety & Security Products 05.2009 6.6 Hardware reset There is a reset button on the back cover of the network camera (see chapter 6.2 Front and rear views of the camera, No. 5). It is used to reboot the network camera or to reset the network camera to the factory default configuration. Depending on the functional problem, rebooting may set the network camera back to normal state. If the problem remains after rebooting, restore the network camera settings to the factory default and install the software aga

• Siemens CCIC1410, Configuration with the CCIC1410 Homepage 61 Siemens Building Technologies Fire Safety & Security Products 05.2009 z Security: WEP (Wired equivalent Privacy): It allows communication only with other devices with identical WEP settings. – Authentication mode: Î Open "Open" is the default setting and means that the key will be communicated across the network. Î Shared: "Shared" allows communication only with other devices with identical WEP settings. – Key length: The administrator can select the key length among 64 or 128 bits. 64 bits is the default setting. �

• Siemens CCIC1410, Safety 5 Siemens Building Technologies Fire Safety & Security Products 05.2009 1 Safety 1.1 Target readers Target readers Qualification Activity Condition of the product End user Has working knowledge of computers. Instruction by technical specialists is necessary. Performs only the procedures for proper operation of the product. The product is installed and configured. Service personnel Technical training for electrical installations. Checks the product at regular intervals to ensure that it is in good working order and perf

• Technical data 11 Siemens Building Technologies Fire Safety & Security Products 05.2009 3 Technical data 3.1 Dimensions 3.2 Product specifications Specification CCIC1410-L CCIC1410-LA CCIC1410-LAW Image system Image sensor 1/4" CMOS sensor Pixels 640 (H) x 480 (V) Compression MJPEG / MPEG4 simultaneous dual-streaming Pict

• Siemens CCIC1410, CCIC1410 Installation Wizard 29 Siemens Building Technologies Fire Safety & Security Products 05.2009 Fig. 5 Network Settings page 4. Enter the information for the LAN setting. 5. Click Next and follow the pages of the Installation Wizard. DHCP or fixed IP: z DHCP: Checking the Get IP by DHCP Server automatically checkbox will force the device to renew its IP address whenever it reboots, and the related network configuration is provided by the DHCP server. z Fixed IP: If you want the device to use a fixed IP, please uncheck the Get IP by DHCP Server automatically checkbox and assign a valid IP address, subnet mask, default gateway and DNS s

• Siemens CCIC1410, CCIC1410 Installation Wizard 21 Siemens Building Technologies Fire Safety & Security Products 05.2009 8 CCIC1410 Installation Wizard The initial setup of the CCIC1410 network camera is done with the CCIC1410 Installation Wizard. For the first use of the CCIC1410 Installation Wizard, just follow the steps of the Wizard Tool. The CCIC1410 Installation Wizard is a software that helps you installing your CCIC1410 camera. You first need to set up the Installation Wizard on your PC, then you can start the configuration. 8.1 Set up the CCIC1410 Installation Wizard 1. Put the installation di

• Siemens CCIC1410, CCIC1410 Installation Wizard 25 Siemens Building Technologies Fire Safety & Security Products 05.2009 8.3.2 Refreshing the device list (and linking to the devices) Clicking on the Refresh Devices button will refresh the device list and search for all devices on the LAN again. Refreshing the device list will take several seconds. If you want to link to your device, double-clicking it on your device list will lead you to the browser for operating your device. 8.4 System settings 8.4.1 Open the system settings page 1. Select a device for which you want to change the settings in the device list (see chap

• Siemens CCIC1410, Configuration with the CCIC1410 Homepage 70 Siemens Building Technologies Fire Safety & Security Products 05.2009 Resolution Video quality Streaming protocol Image rate / ips Bit rate / Mb/s 640x480 good JPEG 15 3.7 176x144 excellent JPEG 30 1.52 176x144 excellent JPEG 15 0.76 320x240 excellent JPEG 30 3.7 320x240 excellent JPEG 15 1.85 640x480 excellent JPEG 30 10.2 640x480 excellent JPEG 15 6.3 176x144 medium MPEG-4 30 0.07 176x144 medium MPEG-4 15 0.05 320x240 med

• Configuration with the CCIC1410 Homepage 73 Siemens Building Technologies Fire Safety & Security Products 05.2009 Enable motion detection 1. Mark the checkbox Enable motion detection to enable this function. The Percentage Indicator will rise or fall depending on the image variation. When motions are detected by the network camera and the percentage excee

• Siemens CCIC1410, CCIC1410 Installation Wizard 34 Siemens Building Technologies Fire Safety & Security Products 05.2009 8.7 Apply settings to selected device After configuring all the settings, the Apply Settings page will show up (Fig. 9). Click Apply to apply the changes to the selected device, or click Back to go back to the previous page and change the setting again. Fig. 9 Apply Settings page When you click Apply, your settings will be updated to the server. When completed, the Access Information page of this server will be displayed.

• 4 Siemens Building Technologies Fire Safety & Security Products 05.2009 8.8 Client settings..........................................................................................38 8.8.1 Stream options ........................................................................................38 8.8.2 MPEG4 media options .....................................

• 3 Siemens Building Technologies Fire Safety & Security Products 05.2009 Contents 1 Safety .......................................................................................................5 1.1 Target readers...........................................................................................5 1.2 General safety precautions ....................

• Siemens CCIC1410, Configuration with the CCIC1410 Homepage 68 Siemens Building Technologies Fire Safety & Security Products 05.2009 NOTE Up to 5 privacy mask windows can be set in the same screen. If you want to delete a window, click on the ‘x’ in the upper right-hand corner of the window to close the window. Video quality settings for stream 1 / stream 2: You can set up two separate streams for the network camera for different viewing devices. For example, set the network camera to a smaller

More Instructions:

Siemens CCIC1410 Installation instruction 20-02-2023 3

DOWNLOAD

Related Products and Documents (Security Camera):

Comparable Devices:

Similar Resources:

• Toshiba CS3910BH (16 pages) ’04/08/27 Ver1.01 High-Resolution CCD Camera CS3910BH 取 扱 説 明 書 Operation Manual 東 京 電 子 工 業株式会社作 成 承 認 確 認 確 認 担 当 担 当 映像情報技術担当 機械設計担当 Contents 1.PRODUCT DESCRIPTION 1 2.FEATURES 1 3.COMPONENTS 2 4.OPTION UNITS …

• Grundig GCA-B1322D (24 pages) GCA-B1322D.1.1.3.11.2010Owner´s ManualEN© ASP AGCameras & DomesGCA-B1322D 1/3" Col/B&W Fixed Dome Camera, Vari-FocalGCA-B0322D 1/3" Col/B&W Fixed Dome Camera, Vari-FocalGCA-B0325D 1/3" Col/B&W Fixed Dome Camera, Vari-Focal, WDRGCA-B0323D 1/3" CCD Col/B&W Fixed Dome Camera w/ IR LEDeVSS Nederland B.V. - Telfor …

• Nortel 1000 (10 pages) Nortel Application Gateway 1000Nortel Application Gateway 1000 Release 6.0Quick Start GuideInstallation and ConfigurationDocument Number: NN42360-301Document Release: Standard 1.3Date: June 2006Year Publish FCC TMCopyright © 2006 Nortel Networks. All rights reserved.Produced in CanadaThe information in this document is subject to change without notice. The …

• Panasonic WV-CP470 Series (12 pages) 1. Do not attempt to disassemble the camera.To prevent electric shock, do not remove screws or covers.There are no user-serviceable parts inside. Ask a qualified service personnel for servic-ing.2. Handle the camera with care.Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damagedby improper handling or storage.3. Do not expose …

• Linksys WVC54GC - Wireless-G Compact Internet Video Camera Network (2 pages) Model No.Product DataWirelessWVC54GCSend live video to a web browser anywhere in the world!Sends high-quality live video to your network wirelessly -- viewable from Windows PCs any-whereSupports up to four simultaneous remote usersBuilt-in stand-alone web server, no PC necessarySecurity Mode auto-matically sends email alerts with video clips upon motion dete …

• Elmo QBiC MS-1 (2 pages) C A U T I O N W A R N I N G WARNING CAUTION Ignoring the warning and operating the system incorrectly may subject the user to possible risk of injury or death. Ignoring the warning and operating the system incorrectly may subject the user to risk of injury or loss of assets. CAUTION CAUTION …

Comments, Questions and Opinions: