Manualios.com

Panasonic AJSD755 - DVC STUDIO VTR Operating Instructions Manual

  • AJSD755 - DVC STUDIO VTR VCR
  • maK68Lu1FD6Ew
  • Operating Instructions Manual
  • PDF / Adobe Acrobat Reader
  • 78

Panasonic AJSD755 - DVC STUDIO VTR Manual Online:

3.75, 1514 votes
Panasonic AJSD755 - DVC STUDIO VTR User Manual
Panasonic AJSD755 - DVC STUDIO VTR User Guide
Panasonic AJSD755 - DVC STUDIO VTR Online Manual

Text of Panasonic AJSD755 - DVC STUDIO VTR User Guide:

  • Panasonic AJSD755 - DVC STUDIO VTR, 23 Automatic editing (deck-to-deck) 1 Re-registering an edit point Locate the new edit point by performing the jog or shuttle operation, and press the IN (or OUT) button and SET button at the same time to re-register the edit point. 2 Modifying an edit point in 1-frame increments (trimming function) Press the TRIM button while holding down the IN (or OUT) button. Each time the + button is pressed, the point is moved ahead by one frame. Conversely, each time the – button is pressed, the point is moved back by one frame. 3 Resetting edit points O Resetting both an edit IN point and OUT point Press the RESET button. (This takes effect only in the CTL mode.) O Resetting

  • Panasonic AJSD755 - DVC STUDIO VTR, 21 Automatic editing (deck-to-deck) 1 Select the editing mode. For assemble editing, press the ASSEM button. For insert editing, press the INSERT button. ASSEM: This sets the unit to assemble (frame-to-frame continuity) editing mode. INSERT: This sets the unit to insert editing mode. 2 Select the channels to be edited. With assemble editing, the ASSEM lamp lights. With insert editing, press the buttons corresponding to the channels to be edited so that their lamps light. 3 Select the VTR to be operated. (Settings for editing using two VTRs) Press the PLAYER or RECORDER button to select the VTR which is to be operated. PLAYER: Press this button if the pla

  • Panasonic AJSD755 - DVC STUDIO VTR, 3 Introduction The model AJ-SD755 multi-purpose studio-use digital VTR employs 1/4-inch wide compact cassette tapes to record, play back and edit material in the DVCPRO (25 Mbps) format. It is also capable of recording and playback in DV format. These VTRs incorporate digital compression technology to dramatically reduce deterioration of picture quality and sound resulting from dubbing, thereby attaining high picture quality. These units also come equipped with a variety of functions, such as assemble and insert functions, which are necessary

  • Panasonic AJSD755 - DVC STUDIO VTR, 17 ON OFF POWER DV DVCPRO METER L R FULL/FINE MONITOR SELECT HEADPHONES MONITOR MIX INPUT SELECT PREVIEW/PREVIEW AUTO EDIT PREROLL VIDEO CH1 REC AUDIO CH2 CH1 CH2 TC PRESET MENU SET DIAG SUPER REC INH INT TCG MODE CONTROL ON OFF UNITY VAR PB COUNTER RESET A IN TRIM SET OUTIN A OUT CH2CH1INSERT ASSEM VIDEO CUE TC STAND BY EDIT REW STOP PLAY REC PLAYER RECORDER FF JOG SHTL SLOW TAPE EE ON REGEN PRESET EXIT OFF REMOTE LOCAL L cassette size Consumer-use DV and DVCAM cassettes (Standard DV and DVCAM cassettes, mini DV and DVCAM cassettes) O Use a cassette adapter (AJ-CS455P, standard access

  • Panasonic AJSD755 - DVC STUDIO VTR, 14 Rear panel < Fan This fan is used to cool down the VTR. If, for any reason, the fan stops, “E-10” will appear on the counter display. = SIGNAL GND terminal This is connected to the signal ground terminal on the component connected to this VTR in order to minimize noise. It is not a safety ground. > ANALOG COMPONENT VIDEO OUT connectors The analog component video signals are output through these connectors. ? ANALOG COMPOSITE VIDEO OUT connectors The analog composite video signals are output through these connectors. The waveform monitor (WFM) signal can be output from the VIDEO OUT 2 connector. It can be selected using setup menu No. 00 (WFM SE

  • Panasonic AJSD755 - DVC STUDIO VTR, 68 The VTR can be operated by commands when the RS-232C interface is used. (See command table on pages 71, 72.) $ Conditions for acknowledging commands from RS-232C interface O The front panel CONTROL switch must be at REMOTE. O The setup menu No. 204 “RS232C SEL” must be ON. If the above conditions are not met, [ACK] + [STX] ER001 [EXT] is returned to the external unit. Whether the [ACK] code is returned depends on the setting which has been selected for setup menu item No. 209 “RETURN ACK”. Hardware specifications External interface specifications RS-232C interface O Connector specifications Connector: D-SUB 25-pin (crossover cable supported) O Ex

  • Panasonic AJSD755 - DVC STUDIO VTR, 73 SDTI interface Digital data input/output operations using the SDTI format (compressed digital interface) are enabled by installing the AJ-YAC930G SDTI board (optional accessory) in this unit. <Notes> SDTI (Serial Data Transport Interface) complies with the SMPTE 305M standard. The data stream format transferred via the SDTI complies with the SMPTE 321M standard. Precautions to observe when using the SDTI signals O The unit can record only if the SDTI input signals are 1a transfer signals in the DVCPRO format. However, when playback signals other than normal 1a playback signals have been in

  • Panasonic AJSD755 - DVC STUDIO VTR, 25 $ Displaying the audio split edit points The edit points appear on the display panel. Video IN point: Press the IN button. Video OUT point: Press the OUT button. Audio IN point: Press the A IN button. Audio OUT point: Press the A OUT button. <Note> If the editing mode is changed to assemble editing after the audio edit points have been registered, the audio edit points will be cleared. $ Cueing the tape up to the edit points Cue-up to video IN point: Press the PREROLL button while holding down the IN button. Cue-up to video OUT point: Press the PREROLL button while holding down the OUT button. Cue-up to audio IN point:

  • Panasonic AJSD755 - DVC STUDIO VTR, 59 Audio V fade function When editing tapes, the edit point splicing selection (setup menu No. 311 and 312) information is recorded on the tape. This information is then sensed during playback, and V fade or cut processing is automatically performed for these sections. However, only when the playback fade selection (No. 727) is AUTO. <Notes> O When the playback fade selection (No. 727) is CUT, cut processing is performed for all splices. O When the playback fade selection (No. 727) is FADE, V fade processing is performed for all spl

  • 72 RS-232C interface $ Commands relating to inquiries <Notes> O As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is subsequently returned. It is only the execution message which is listed in this table. O In the case of commands not listed in the table, ER001 (invalid command) is returned aft

  • 63 When a warning occurs in this unit, the error number is indicated on the counter display. Open the DIAG menu to display a description of the error on the counter display or monitor TV. When a operational malfunction has occurred in the unit, the error number flashes on the counter display. DIAG menu This display the VTR information. VTR information includes “WARNING” information, “HOUR

  • Panasonic AJSD755 - DVC STUDIO VTR, 49 <Concerning the CUE output in the search mode> The table below shows how the CUE output to the monitor and main signal system outputs differs according to how the setup menu item (No. 721, No. 731 and No. 735) settings are combined. 731 CUE OUT SEL OFF MANU AUTO PCM MANU ---------- L/R L R ---------- ---------- L/R L R ---------- PCM 21 PCM 21 CUE CUE CUE PCM 21 PCM 21 PCM 22 PCM 21 CUE CUE PCM 21 CUE PCM 21 CUE PCM 22 CUE PCM 22 PCM 21 PCM 22 PCM 21 PCM 22 PCM 22 PCM 21 CUE CUE PCM 21 PCM 21 CUE PCM 21 PCM 21 PCM 22 CUE PCM 22 AUTO PCM ON 721 MONI

  • Panasonic AJSD755 - DVC STUDIO VTR, 69 Software specifications (Protocol) 1.Communication parameters RS-232C interface Communication system Asynchronous, full duplex Communication speed 300/600/1200/2400/4800/9600 Bit length 7bit/8 bit Stop bit 1 bit/2 bit Parity bit NONE/ODD/EVEN ACK code ACK code returned/ACK code not returned <Note> The ACK code is what is returned from the VTR to the controller when data has been successfully sent from the controller. The underlining indicates the factory settings. Communication parameter Setup menu item Communication speed No.205 BAUD RATE Bit length No.206 DATA LENGTH Stop bit No.207 STOP BIT Parity bit No.208 PARITY ACK code No.209 RETURN ACK Any changes to the settin

  • Panasonic AJSD755 - DVC STUDIO VTR, 47 Setup menus The underlined items indicates the initial setting. USER menu <VIDEO> No./Item Description 661 UMID GEN This selects the basic UMID information to be recorded on the tape when ON has been selected as the setup menu item No. 660 (UMID REC) setting. 0000 INT : Newly created basic UMID information of this unit is always recorded. 0001 EXT : The basic UMID information of the input signals is recorded. Newly created basic UMID information of this unit is recorded if there is no basic UMID information on the input signals. <Note> The source pack (of the UMID information) of the input signal will be recorded on the tape, regardless of this me

  • Panasonic AJSD755 - DVC STUDIO VTR, 38 Setup menus The underlined items indicates the initial setting. USER menu <OPERATION> No./Item Description 114 REC INH LAMP This selects whether to cause the REC INH lamp to flash or light up when the cassette has been set to the accidental erasure prevention status. 0000 LIGHT : The lamp lights up. 0001 FLASH : The lamp flashes. <Note> When the REC INH switch is set to ON, the REC INH lamp always lights regardless of the general setting status. 115 EJECT SW INH This selects whether to enable or disable the operation of the EJECT button on the front panel. 0000 REC : Operation is disabled while the unit is i

  • Panasonic AJSD755 - DVC STUDIO VTR, 77 Specifications [VIDEO] $ Video output connector Analog component output: BNCa3 (Y, PB, PR) Y: 1.0 V [p-p], PB/PR: 0.486/0.7 V [p-p] switchable, 75Ω (75% color bar, 7.5% setup) Analog composite output: BNCa3, video 1, video 2 (video/WFM selectable), video 3 (superimpose on/off) SDI output (option): BNCa3, complies with SMPTE 259M-C standard SDI 1, SDI 2, SDI 3 (superimpose on/off) SDTI output (option): BNCa2, complies with SMPTE 305M/321M standard $ Video signal adjustment Video output gain: ±3 dB Video output chroma gain: ±3 dB Video output HUE: ±30° Video output setup level: ±14 IRE Video output sync phase: ±15 µsec Video output SC phase: ±180° [AUDIO

  • 37 Setup menus The underlined items indicates the initial setting. USER menu <OPERATION> No./Item Description 111 FRZ MODE SEL This selects the output picture in the STANDBY OFF (HALF LOADING) and EJECT modes. 0000 DIS : The video output is muted. 0001 STB OFF : When the STANDBY OFF (HALF LOADING) mode is established, the picture being played back at the time is frozen and outp

  • 20 Automatic editing (deck-to-deck) 1 Set the POWER switch to ON. 2 Use the INPUT SELECT buttons to select the video and audio input signals. 3 Switch the time counter display to TC, CTL or UB. 4 If the recording levels are to be adjusted using the level controls, set the audio level control selector switch to the VAR position. If the recording levels are to be fixed, set the

  • Panasonic AJSD755 - DVC STUDIO VTR, 45 Setup menus The underlined items indicates the initial setting. USER menu <VIDEO> No./Item Description No./Item Description 600 INT SG This selects the internal reference signal. 0001 BB : The black burst is generated. 0002 CB100 : 100% color bars are generated. 0003 CB75 : 75% color bars are generated. 601 OUT VSYNC This selects whether to float the vertical sync position of the video output in order to align the video output phase with the input in the EE/record/edit modes. 0000 N-VF : Signals are not floated. 0001 VF : Signals are floated. 602 V-MUTE SEL This selects whethe

  • Panasonic AJSD755 - DVC STUDIO VTR, 41 Setup menus The underlined items indicates the initial setting. USER menu <EDIT> No./Item Description 320 VAR FWD MAX This sets the maximum SLOW FWD speed. 0000 +4.1 : +4.1 (+3.1)a speed 0001 +1.85 : +1.85a speed 0002 +1 : +1a speed <Notes> OThe value for the DV/DVCAM tape is shown in parenthesis ( ). OAt any speed setting other than +4.1, the phase cannot be synchronized from the editing controller. 323 JOG FWD MAX This sets the maximum JOG FWD speed. 0000 +4.1 : +4.1 (+3.1)a speed 0001 +1.85 : +1.85a speed 0002 +1 : +1a speed <Notes> OThe value f

  • 67 Error messages Error messages Display ODescription OVTR operation and corrective action E-78 M-IF COMM ERROR If a problem has been encountered in communication between the servo microcomputer and mechanism relay board, this error number flashes on the display. VTR: STOP OSet the POWER switch to OFF and then to ON again. E-67 T REEL ROTA TOO FAST If the take-up re

  • Panasonic AJSD755 - DVC STUDIO VTR, 12 9 EDIT, EDIT REC, REC and REC INH lamps EDIT: This lights when an editing mode has been selected. EDIT REC: This lights when the edit recording mode has been established. REC: This lights when the recording mode has been established. REC INH: This lights in the recording inhibit status (when the REC INH switch at the bottom front panel is set to ON or the cassette is in the accidental erasure prevention status). In this status, recording and editing are not possible. Whether the REC INH lamp is to light or flash when recording has been inhibited by the accidental erasure prevention tab on the cassette tape can be selected

  • Panasonic AJSD755 - DVC STUDIO VTR, 10 Front panel V DIAG button When this button is pressed, the VTR information is displayed. When it is pressed again, the original display is restored. The VTR information consists of the “WARNING” information, “HOURS METER” information and “UMID” information. Switching between the display of each type of information is accomplished by pressing the search button. Displayed on the “WARNING” screen are details of the warnings. Displayed on the “HOURS METER” screen are the deck’s serial number, power-on time, drum rotation time, tape travel time, number of times a

  • 26 Audio split editing $ Duration display The duration can be indicated on the display panel only. Between the video IN and OUT points: Press the IN button and OUT button at the same time. Between the audio IN and OUT points: Press the A IN button and A OUT button at the same time. Match frame processing system When two VTRs are used to perform the audio split editing operations, there will be

  • Panasonic AJSD755 - DVC STUDIO VTR, 36 Setup menus The underlined items indicates the initial setting. USER menu <OPERATION> No./Item Description 100 SEARCH ENA This selects the direct search dial operation. 0000 DIAL : For direct search dial operations. 0001 KEY : Operation is not transferred to the search mode unless the search button is pressed. 101 SHTL MAX This sets the maximum speed for shuttle operations. 0000 a8.4 : 8.4a normal speed 0001 a16 : 16a normal speed 0002 a32 : 32a normal speed 102 FF. REW MAX This sets th

  • Panasonic AJSD755 - DVC STUDIO VTR, 32 Setup menus SYSTEM menu No./Item Description The underlined items indicates the initial setting. 00 WFM SEL This selects the signal to output from the VIDEO OUT 2 connector. 0000 CTL : The CTL signal is output. 0001 TC : The TIME CODE signal is output. 0002 VIDEO : The VIDEO OUT signal is output. 0003 RF : The PB RF signal is output. 0004 ENV : The PB ENV signal is output. <Notes> OThe settings can be changed at any time regardless of the setup menu item No. 30 (MENU LOCK) setting. ODur

  • Panasonic AJSD755 - DVC STUDIO VTR, 48 Setup menus The underlined items indicates the initial setting. USER menu <AUDIO> No./Item Description No./Item Description 701 CH1 IN LV This selects the audio input (CH1) reference level switching. 0000 4dB 0001 0dB 0002 –20dB 702 CH2 IN LV This selects the audio input (CH2) reference level switching. 0000 4dB 0001 0dB 0002 –20dB 706 CH1 OUT LV This selects the audio output (CH1) reference level switching. 0000 4dB 0001 0dB 0002 –20dB 707 CH2 OUT LV This selects the audio output (CH2) reference level switching. 0000 4dB 0001 0dB 0002 –20dB 711 MONIL OUT LV This selects the audio monitor output (Lch) reference level switching. 0000 4dB 0001 0dB 0002 –20

  • Panasonic AJSD755 - DVC STUDIO VTR, 61 ABCDEF GH 2 Attach the outer member brackets to the rack. Check that the height is the same for the left and right brackets. 3 Remove the four screws at the front for attaching the left and right side panels. 4 Attach the AJ-MA75P rack mount adapter using the same 4 screws. 1 Attach the inner members of the slide rails. Refer to the figure below for the locations where the screws are to be attached. The unit can be mounted into a 19-inch standard rack using the optional rack-mounting adaptors (AJ- MA75P). For the installation rails, it is recommended that t

Related Products and Documents (VCR):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sony XS F1034 Instructions sony/xs-f1034-IU4.pdf 08 Nov 2022 2 0.3 Mb
2 Viking HD-1 Technical practice viking/hd-1-NGO.pdf 16 Oct 2023 4 0.22 Mb
3 Fantec QB-35US3 Brochure & specs fantec/qb-35us3-9AA.pdf 20 Jun 2022 2 0.17 Mb
4 Continental Platinum CP43219 Instruction manual continental-platinum/cp43219-893.pdf 06 Jun 2023 8 0.56 Mb
5 Philips GoGear SA2620 Specifications philips/gogear-sa2620-LBL.pdf 13 Nov 2022 2 0.47 Mb
6 Datexx DF-70 Operation & user’s manual datexx/df-70-D93.pdf 10 Nov 2023 1 0.04 Mb

Similar Resources:

  • Philips

    TL960A/00T

    (18 pages)
    1Power supply: AC120V, 60Hz onlyIf the unit isto be left unattended fora long period and itis notintended to use the unit,it is recommendedthat the unit becompletely switchedoff by removingthe plug.Illustrated belowis molded on theback of your unit.This symbol warnsthe user thatuninsulatedvoltage within theunit may have sufficientmag-nitude to cause electric …
  • Magnavox

    VR601BMG

    (2 pages)
    4-Head Hi-Fi Video Cassette RecorderVR601BMG4-head, double azimuth designHi-Fi stereo sound with built-in MTS/SAP decoderFront panel audio/video/game inputsStill frameSlow motionAuto head cleanerFull Auto-Feature PackagePower OnDigital Auto TrackingAuto PlayAuto RepeatAuto RewindAuto EjectAuto Power OffVideo Cassette RecorderUnified TV/VCR Remote …
  • Panasonic

    PV-V4021

    (32 pages)
    Connections and InitialSetupProceduresareonpages 8to 9.As an EP4Ef(Gy StaR'^PafS/mAmenc3 hsii DctcmlnQd thas (his productor product mcdci mcols tho ENEfiG YSfAfl'^ guideiines tor energy efficiency.Plaas© read these Instructionscarefully before attemptingto connect,operateoradjust this product. Please save this manual.Spanish Quicl^ Use Guide is in …
  • Grundig

    GV 470 S VPT

    (210 pages)
    AV/CVTRACKINGPROGRAM2 31548 970SAT6EW/EDSET;OKCLCHECKAUTOpo:ÇHIFICOUNT0000LP*8VRECORDON/OFFTIMERS-VHSTVAV8op+–PROGRAMeRP 35VIDEO 1VIDEO 2ATSSTOPPPAL/SECCODEPICTUREOKTIP VPT INFO)#<34wqRP35Service ManualÄnderungen vorbehalten Printed in Germany Service Manual Sach-Nr. 72010-517.10Subject to alteration VK 222 0794 Service Manual Part No. 72010-51 …
  • Emerson

    EWV601A

    (82 pages)
    F.FWDPAUSESTILLREWCHANNELTAPE SPEEDPOWERVIDEO L AUDIO RVCR/TVPOWER VCR/TV TAPE IN TIMER RECPLAYSTOP/EJECTRECOTRMENUCHANNELTAPE SPEEDTIMERTAPE INPOWER VCR/TVVCR/TVPOWERRECVIDEO L AUDIO RREWPLAYREC/OTRMENUSTOP/EJECTPAUSE/STILLF.F W DSTOP/EJECTREC/OTRF.FWDPAUSE/STILLREWPOWERVIDEO AUDIOLRPOWERVCR/TVVCR/TVPLAYRECCHANNELTAPE SPEEDTAPE IN TIMERMENUSERVICE MANUALV …
  • JVC

    HR-J648EH, HR-J648E, HR-J448E,

    (48 pages)
    HR-J648EH (Hi-Fi)HR-J648E (Hi-Fi)HR-J448E (Monaural)HR-J248E (Monaural)VIDEO CASSETTE RECORDERINSTRUCTIONSLPT0002-097APALSEE AUTO SET UPON REAR SIDESEE AUTO SET UPON REAR SIDE¶REC1REW4¢7STOP3PLAY8PAUSEREW ¡TV12345/ADD TIME67/ 8/DAILY0/AUX9/WEEKLYTV/VCR(MONITOR)CANCEL/C.RESETPROG CHECK4 TIMERTV PROGDATESTOPSTARTPROG/MENUOKC …

Comments, Questions and Opinions: