Manualios.com

Speco VIP2B3 Instruction Manual

Speco VIP2B3 Manual Online:

4.05, 527 votes
Speco VIP2B3 User Manual
Speco VIP2B3 User Guide
Speco VIP2B3 Online Manual

Text of Speco VIP2B3 User Guide:

  • Speco VIP2B3, 4.3 Product Specification Main Item Specification Image sensor 1/2.8” Progressive scan RGB CMOS Active Array 1920(H) x 1080(V) Lens Fixed 3.7mm Lens , F1.8 Angle of View 3.7mm – 89°(H) IR Distance 20m(with built-in 20 IR LEDs) Min. illumination Color: 1.6Lux, B/W: 0.0Lux (F1.8, 50IRE with IR On) C A M E R A Shutter Speed 1/20,000 ~ 1/4 Video Compression Motion JPEG MPEG-4 Part2 H.264 (MPEG-4 Part 10) Profiles: H.264 HP, MP, and BP, MPEG-4 ASP and SP Video Resolutions 320x240 ~ 1920x1080 Frame Rate 30fps/25fps @ all resolutions Video Streaming

  • Speco VIP2B3,  RTP Hav e a setting for sending and receiving a video on a real-time basis. These settings are the IP address, port number, and Time-To-Live value to use for the media stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. For more information, please see the online help. • Port Range - Start port: Enter a value between 1024 and 65532 • Multicast This function is for sending Video to Multicast group. - Enable Multicast: Check the checkbox to enable multicast operation. - Multicast destination IP:

  • Speco VIP2B3,  Basic • IP Address Configuration: - Obtain IP address via DHCP: Dynamic Host Configuration Protocol (DHCP) is a protocol that lets network administrators centrally manage and automate the assignment of IP addresses on a network. DHCP is enabled by default. Although a DHCP server is mostly used to set an IP address dynamically, it is also possible to use it to set a static, known IP address for a particular MAC address. - Use the following IP address: To use a static IP address for the Network Camera, check the radio button and then make the following settings: * IP address: Specify a unique IP address for your Network Camera. *

  • Speco VIP2B3,  Alarm Out When th e network camera detects an event, it can control external equipment connected to its alarm output port. Check the box to enable and then select either: - Enable: When you select “Enable alarm out”, the output will be activated for as long as the event is active. 36

  • Speco VIP2B3,  Zeroconfig Zeroconfig allows the network camera to create and assign IP address for network cameras and connect to a network automatically. Zero configur ation networking (zeroconf), is a set of techniques that automatically creates a usable Internet Protocol (IP) network without manual operator intervention or special configuration servers. Zero configur ation networking allows devices such as computers and printers to connect to a network automatically. Without zeroconf, a network administrator

  • Speco VIP2B3, WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the pr

  • Speco VIP2B3, 1.3 Overview • Connection Cable NO Wire Color Description 1 Black Service Monitor Port, Stereo Jack 2 Black Ethernet, RJ-45 port compatible with 10/100Mbps having PoE functionality. Modular Jack 3 Red: AC24V/DC12V White: AC24V/GND Main Power, 2pin terminal, AC24V 370mA(5.8W) / DC12V 420mA(5.1W) 4 Pink: Alarm In Yellow: GND Light Blue: Alarm Out Gray: GND Alarm Input, Alarm Output: 4pin terminal.  Camera Dimension Dimension s Un

  • Speco VIP2B3, 3) Video & Image • Stream1 Setting - Codec: The codec settings are separated into MPEG4 and H.264. H.264 is a lso known as MPEG-4 Part 10. This is the new generation compression standard for digital video. This function offers higher video resolution than Motion JPEG or MPEG-4 at the same bit rate and bandwidth, or the same quality video at a lower bit rate. There are 4 pre-programmed stream profiles available for quick set-up. Choose the form of video encoding you wish to use from the drop-down list: * H.264

  •  DDNS • Internet DDNS(Dynamic Domain Name Service) When using the high-speed Internet with the telephone or cable network, users can operate the Network Camera even on the floating IP environment in which IPs are changed at every access. - Enable DDNS: Check to get DDNS service to be available. * Ho

  • Speco VIP2B3, 3.6 Playback The Playback window contains a list of recordings made to the memory card. It shows each recording's start time, length, the event type used to start the recording, calendar and time slice bar indicates if the recording is existed or not. The descripti on of playback window follows. (1) Video Screen You can see the video screen when playing the video clip in the Micro SD memory (2) Playback Buttons To view a recording data in the SD local storage, select it from the list and click the Playback buttons. Go

  • Speco VIP2B3, 3) Event Map The e vent map allows you to change the settings and establish a schedule for each event trigger from the Network Camera. You can register the event map up to max. 15. Click Add button to make a new event map and you can see a popup window as below. 41

  • Speco VIP2B3, 3.7 Help The Help information window will be provided as a popup window so that users can open and read it without a need for log-in. It will offer a description on setting and Help page by which users can manipulate the Network Camera without a reference to the manual. 64

  • 3. Operation The Network Camera can be used with Windows operating system and browsers. The recommended browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome with Windows. Note: To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX controls. 3.1 Access from a browser 1. Start a browser (Internet

  •  Manual Trigger This option makes use of the manual trigger button provided on the live view page, which are used to start or stop the event type manually. Alternatively the event can be triggered via the product's API (Application Programming Interface). 30

  • Speco VIP2B3,  UPnP The Network Camera includes support for UPnP™. UPnP™ is enabled by default, and the Network Camera then is automatically detected by operating systems and clients that support this protocol. Note: UPnP™ must be installed on your workstation if running Windows XP. To do this, open the Control Panel from the Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services section. Click Details and then s

  • Speco VIP2B3, • Day & Night Control Select the day/night mode from among three modes. - Mode: Normally works in day mode. It switches automatically to night mode in a dark place. * Automatic: Normally works in day mode. It switches automatically to night mode in a dark place. * Day: Always works in day mode. * Night: Always works in night mode. • IR Control - Enable IR: Set this checkbox to activate IR operation. * Max Strength: Select a value in the drop-down list to tune the strength. The default setting is 3.  Privacy Masking The privacy masking function allows you to mask parts of the video image to be transmitted. You can set up to eight

  • Speco VIP2B3, • Health Check - System Check: Click the System Check button to get the important information about the camera’s system resources. You can see the pop-up window below. - Media Chec k: Click the Media Check button to get the information about the camera’s video and audio stream. You can see the pop-up window below. 59

  • Speco VIP2B3, 3.5.3 Event 1) Event-In  On Boot This i s used to trigger the event every time the Network Camera is started. Select “Enable” to activate the motion event. 28

  • * MPEG4 SP(Simple Profile): Mostly aimed for use in situations where low bit rate and low resolution are mandated by other conditions of the applications, like network bandwidth, device size etc. - Resolution: It enables users to determine a basic screen size when having an access through the Web Browser or PC program. The screen size control comes in seven modes like 1920x1080,

  • Speco VIP2B3, Step forward play: go forward one frame of the video clip. Clip copy: copy the video clip. Zoom In: zoom in the video clip Full Screen: display full screen of the video. (3) Time Chart Display an hour-based search screen for the chosen date. If there is recording data, a blue section will be displayed on a 24-hour basis. If you select a particular hour in the chart, a yellow square on the hour will be displayed. (4) Speaker Control Bar Use this scale to control the volume of the speaker

  • Speco VIP2B3, 3.2. Access from the internet Access from the internet once connected, the Network Camera is accessible on your local network (LAN). To access the network camera from the Internet you must configure your broadband router to allow incoming data traffic to the network camera. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the network camera. This is enabled from Setup > System > Network > NAT. For more information, please see “3.5.6 System>Network

More Instructions:

DOWNLOAD

Related Products and Documents (IP Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Epson LX-300+ Service manual epson/lx-300-9MZ.pdf 26 Dec 2022 129 3.8 Mb
2 HP LaserJet 3390 Service manual hp/laserjet-3390-976.pdf 27 Feb 2023 364 22.84 Mb
3 Dell E5400 - Latitude - Core 2 Duo 2.4 GHz Product manual dell/e5400-latitude-core-2-duo-2-4-ghz-VS3.pdf 15 Oct 2023 39 1.5 Mb
4 Philips 667043016 Operation & user’s manual philips/667043016-C6S.pdf 01 Jul 2022 40 3.99 Mb
5 Cisco DPC3829 Operation & user’s manual cisco/dpc3829-DD2.pdf 22 Sep 2023 56 1.73 Mb
6 Maxtor MaxLine Plus II 250GB AT Product manual maxtor/maxline-plus-ii-250gb-at-WX8.pdf 20 Sep 2023 75

Similar Resources:

  • Huviron

    SK-V251IR(D)

    (2 pages)
    FULL HD-TVI(1080P) VANDALPROOF & WATERPROOFIR D&N DOME CAMERASK-V251IR(D)/HT21AIMANUAL1. Camera installation  (1)Fix the camera set with the supplied screws on ceiling or wallmount.Ifyoudon'tusesuppliedscrews,thecameramayfalloff. (2)Please refer to &a …
  • HIKVISION

    DS-2CD4025FWD-A

    (37 pages)
    0 Network Box Camera Quick Start Guide UD04345B Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]
  • Fluke

    TiR1

    (10 pages)
    Find building problems faster.IR-Fusion® Technology— infrared and visual images fused together—makes infrared easy to understandDesigned especially for building and restoration applicationsRugged, reliable, easy to use… what Fluke tools reputation has been for over 50 yearsModels for any application and budgetFluke TiR Series Thermal Imagers …
  • Onvif

    CBIH116IR

    (12 pages)
    101 Wrangler, Suite 201 • Coppell, Texas 75019 • Phone: 469-635-6800 • Fax: 469-635-6822 • Toll Free: 1-888-694-STAR (7827) www.costarvideo.com • High resolution H.264 / MJPEG dual encoding and transmission • 30 images per second at 1.3 mega pixel resolution • Versatile 3.6-16mm auto Iris mega pixel lens • Advanced 1/3” pr …
  • Reolink

    QG1_A

    (4 pages)
    Reolink Solar PanelQuick Start GuideFor more troubleshooting, please go to FAQs on our website:https://reolink.com/faqs/For other technical support, please contact us [email protected] SupportQG1_A …
  • infobit

    BV40

    (2 pages)
    What is content in package ?Remote control’s funcons①Video conference camera * 1 ②User’s manual * 1 ③Expansion mics * 1-3 ④Charging tray * 1-2⑤Bracket and screws * 1⑦Power supply of the camera * 1 ⑧Power supply of the charging tray * 1-2⑨USB - type C cable * 1-2⑩Remote control (no baery) * 1Note: If the remote control is not avail …

Comments, Questions and Opinions: