Philips SLV4200 Operation & User’s Manual

Text of Philips SLV4200 User Guide:

• Table of contents 3 Table of contents 1Important 4 1.1 Power requirements 4 1.2 Conformity 4 1.3 Recycling and disposal 5 1.4 Electric, Magnetic and Electromagnetic Fields ("EMF") 5 1.5 Installation requirements 6 2 Your Wireless TV link 7 2.1 What’s in the box 7 2.2 Overview of the Wireless TV link 7 3Getting started 9 3.1 Connect transmitter 9 3.2 I

• Philips SLV4200, 4 Important 1Important Take time to read this user manual before you use your wireless TV link. It contains important information and notes regarding your wireless TV link. 1.1 Power requirements • Connect the power adapters only to a 100-240V AC 50/60Hz power supply. • The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. Warning To avoid damage or malfunction: • Do not expose the wireless TV link to excessive heat caused by heating equipment or direct sunli

• Philips SLV4200, Important 5 1.3 Recycling and disposal Disposal instructions for old products. The WEEE directive (Waste Electrical and Electronic Equipment; 2002/96/EC) has been put in place to ensure that products are recycled using best ?available treatment, recovery and recycling techniques to ensure human health and high environmental protection. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Do not dispose of your old product in your general household waste bin. Inform yourself about the local separate collection system for electrical and electronic products marked by this symbol: Use o

• Philips SLV4200, 6 Important 1.5 Installation requirements The product transmits and receives radio waves when it is switched on. The product complies with the standards that are defined for it. As the product is based on RF technology, the quality of the image can be influenced by microwave ovens, Bluetooth, Wifi etc. Therefore the product can suffer from the same kinds of interference as GSMs, portable radios and other RF-based products.

• Philips SLV4200, Your Wireless TV link 7 2 Your Wireless TV link Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 2.1 What’s in the box 2.2 Overview of the Wireless TV link Control and display elements 1SOURCE switch A. Transmitter B. Receiver D. RCA/SCART cable G. User manual C. SCART cable E. Power adapter (2x) F. Remote control blaster cord Transmitter

• Philips SLV4200, 8 Your Wireless TV link Control and display elements 2 green: on (source 1) 3 green: on (source 2) 4 Power on/off switch 5 Power input connector (DC 9V) 6 RCA cable entry 7 Antenna 8 Wireless channel selection switch > Select from 4 available channels 9 Remote control blaster cord port 10 SCART cable entry Control and display elements 11 Power light: >green: on 12 Power on/off switch 13 Power input connector (DC 9V) 14 Antenna 15 SCART cable 16 Wireless channel selection switch > Select from

• Philips SLV4200, Getting started 9 3 Getting started 3.1 Connect transmitter Two video sources can be connected at the same time to the SLV4200 transmitter. The video sources can be following: DVD players/recorders, VCR, Game Consoles, Cable & Satellite Set-Top- Boxes, and more. 1 Connect video source 1 to the transmitter (A). a. Unplug the Scart cable that connects source 1 to the TV1. b. Connect the transmitter to the source 1 using the supplied SCART/SCART cable (C ). 2 Connect video source 2 to the transmitter (A). a. Unplug the Scart cable that connects source 2 to the TV1. b. Take the supplied RCA/SCART cable (D). c. Plu

• Philips SLV4200, 10 Getting started b. Plug the adapter into the power outlet. c. The green LED on the front panel should be on. Note: if it is not the case, press the ON/ OFF switch on the back of the product. 5. Check that TV1 is working well a. Switch on TV1 b. Check that TV1 is working well. c. Switch on the connected video source for the video source chosen. d. Check if TV1 shows the image of the video source. > The transmitter is connected correctly. 3.2 Install the remote control blaster cord The remote control blaster cord transmits IR signal to Source devices. 1. Switch off the transmitter (A)

• Philips SLV4200, Getting started 11 - Switch on the Video source. - Take these items: • Receiver (B) • Power adapter (E) • Remote control of the video source. - Go to TV2. 1. Connect the receiver to the second TV (TV2) Plug the SCART cable of the receiver (B) into the SCART port of TV2. 2. Connect the power adapter a. Take the supplied power adapter (E) to plug the connector into the DC 9V power connector on the Receiver (B). b. Plug the adapter into the power outlet. c. The green LED on the front panel should be on. Note: if it is not the case, press the ON/ OFF switc

• 12 Getting started Note: If the VCR or DVD recorder records a television program, you watch the recorded channel. Note: how to watch a video source on TV1? Use your TV1 and your video source as usual to watch a video source on TV1. Note: In case the video source does not react the IR control blaster might not be installed properly. See the FAQ “How can I find the IR sensor on the video so

• Philips SLV4200, Technical Data 13 4 Technical Data Transmitter System: RF (TV-LINK) Modulation: FM Weight: 0.27kg Dimensions: 120X182X40.2mm Carrier Frequency: 5750~5855MHz Channels: 4 Radiated Output Power: 25mW Effective Transmission Range: 35m Audio Input level: 2V Video Input level: 1.1V Power requirements: 9V/500mA IR Extender Receiver RF Frequency: 433.92MHz Receiving Sensitivity: -90 ~ -98 dBm IR carrier Frequency: 30~57kHz IR LED Operation Range: 3m Receiver System: RF (TV-LINK) Weight: 0.33kg Dimensions: 120X182X40.2mm P

• Philips SLV4200, 14 Frequently asked questions 5 Frequently asked questions www.philips.com/support In this chapter, you will find the most frequently asked questions and answers about your product. No image or wrong image on TV1 • Make sure the video source is switched on. • Make sure the video source is connected to the transmitter (A). • Make sure the transmitter (A) is connected to TVI. • Make sure the transmitter (A) is switch on. • Make sure SCART cables are firmly inserted. • Make sure the correct SCART input on TV1 is selected. No ima

• Philips SLV4200, Frequently asked questions 15 Easylink feature does not work. • Check if the TV and VCR support Easylink. • Check if you used full-wired SCART cables. Black and white image with S-VHS VCR. • (Super Video Home System Video/ Cassette/Recorder) • Check if the SCART connector of the S-VHS VCR gives signal in CVBS. (Composite Video Broadcast Signal). See its user manual. How can I find the IR sensor on the video source? • The blaster light needs to be positioned precisely on the IR sensor of the video source. Some equipments have the letters IR at the front indicating the location of the

• Philips SLV4200, 16 Glossary 6Information 6.1 Warranty One year limited warranty For 12 month from the date of purchase the manufacturer repairs or replaces any faulty product free of charge, subject to proof of purchase, provided the fault has not been caused by improper handling or use, and provided the product has not been damaged, whether as a result of an accident or of repair by others than the manufacturer. 6.2 Glossary CVBS: Video standard for showing colors on a TV. Easylink: Gives a VCR or DVD recorder the pos

• INDEX 17 7 INDEX C Channel 12 Connect receiver 10 Connect transmitter 9 E Enjoy 11 F Frequently asked questions 14 G Getting started 9 I Information 16 Interference 12 O Overview of the Wireless TV link 7 R Remote control blaster cord 10 T Technical Data 13 W What’s in the box 7 Y Your Wireless TV link 7

• Philips SLV4200, © 2009 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Document number: SLV4200_12_EN_UM_V1.1 145- 142000002 (master EN) Printed in China

Related Products and Documents (Receiver):

Comparable Devices:

Similar Resources:

• Hammarlund SP-600-JI-17 (81 pages) =--------------*'-----'--------""""'-------;;;T.O.31R2-4-18-16HANDBOOKPREVENTIVE MAINTENANCEINSTRUCTIONSHAMMARLUNDRADIORECEIVER~MODELSSP-600-JI-17ANDSP-600-JI-21~®~LATESTREVISEDPAGESSUPERSEDEII,,~')!~~uI.S'JTHE5A~~••~A'?~~d?=•.~~~~~.~U5DATE~~~O'l\C£~ublication.Destroysupersededpages.~~IIPUBLISHED …

• Sony STR-DA3700ES (5 pages) The sophisticated Sony STR-DA3700ES provides exceptional performance for high-end home theaters. Immerse yourself in stunning sound and the broadest array of Internet streaming video and audio choices. Get the best performance simple with activity based navigation, an iOS and Android® app, seamless integration with control systems and more. STR-DA3700ES7.2 …

• Strong SRT 7004 (34 pages) www.strong.tv Picture similarUser manualBedienungsanleitungManuel d’UtilisateurManuale utenteManual del usuarioManual do UtilizadorFelhasználói kézikönyvDigital High Definition Satellite Receiver SRT 7004 …

• HAMTRONICS R302 Series (9 pages) ©2005 Hamtronics, Inc.; Hilton NY; USA. All rights reserved. Hamtronics is a registered trademark. Revised: 5/17/05 - Page 1 -GENERAL INFORMATION. The R302 is the latest in a series of popular receivers for demanding ap-plications which require exceptional sensitivity and selectivity. It is espe-cially suited for repeaters, audio and data links, and r …

• Elmo VPR-2 (2 pages) VP Receiver VPR-2 NOTICE: - Do not use this product outside your Country. - Depending on the specification of the HDMI device, this product may not work properly or there may be some effect on performance. - Compatibilities with supporting models have been confirmed in our environment. - We do not guarantee operation in all environments. …

• SOMFY 1810872 (2 pages) www.somfysystems.comThis 16-channel interface allows users to convert infrared, RS-232 and RS-485 protocol into Radio RTechnology Somfy (RTS) for RF control of interior and exterior window coverings, powered bySomfy motors. Window covering control made simplerUNIVERSAL RTS INTERFACE …

Comments, Questions and Opinions: