Manualios.com

CMT IP Cam w Operation & User’s Manual

CMT IP Cam w Manual Online:

4, 1760 votes
CMT IP Cam w User Manual
CMT IP Cam w User Guide
CMT IP Cam w Online Manual

Text of CMT IP Cam w User Guide:

  • CMT IP Cam w, Day&night IP Camera 3.8. Email/FTP Alarm The IP CAM provides the Email/ftp function, you can enable schedule the Email/ftp ability in this page, the IP CAM will then send out an email with a jpeg picture attached in the email and/or send out the jpeg picture file to a ftp server. The related settings are explained below: 1. Email/FTP trigger – choose between “motion”, “schedule” and “disable” A. If “motion” is selected, it means that when there is a motion detected, the system will

  • CMT IP Cam w, Day&night IP Camera 3.12. Admin In this page, you can modify the web login account. With this account, you can login to the IP CAM and do any modifications. The default account is “admin” without password. If the login account is forgotten, you can reset the IP CAM to the factory default settings by following the steps in section 3.16 and login with the “admin” account. Please be noticed that this account is different from the video play password in the “Video settings” page. Figure 3-19: Admin settings page 35

  • CMT IP Cam w, Day&night IP Camera 3.6. Video Settings The IP CAM is designed to provide high quality video for viewing from CamView software. In this page, you cam modify some settings related to the video viewing: 1. Password(play video) – this is the password needed for viewing the video from the CamView software. Together with the IP CAM ID, you can view the video of this IP CAM anywhere in the world through the Internet. 2. Internet speed – this is the Internet bandwidth of your network environment. Higher value will generate higher video quality. But if your internet connection can not provide more bandwidth than the specified value, the video quality could degrade.

  • CMT IP Cam w, Day&night IP Camera 3.1. Information The first page of the web configuration of the IP CAM is the information page. You can see the model name/firmware version, IP CAM ID, registration status, network type and current video settings( bandwidth, resolution) in this page. The IP CAM can be viewed remotely by the CamView software only when the IP CAM is registered. If this IP CAM is not registered, please check the Ethernet wiring of your network environment. The “Network type” field displays the network connection(wired or wireless) and method(DHCP, PPPoE or static ip) the IP CAM is running. The “Video users” field displays the n

  • CMT IP Cam w, Day&night IP Camera where ID is the ID of this IP camera. All the recorded files are with the name of hhmmss.crf format, where hh is the hour, mm is the minute, ss is the second of the starting time of the recording video. The files are segmented every five minutes. Users can use the free bundled CamPlay software to play back the video files. Figure 3-15: NAS Storage Settings page 30

  • CMT IP Cam w, Day&night IP Camera 3.13. Upgrade If there is some new firmware available from the supplier of this IP CAM, you can upgrade the firmware on this page. Please ask for the correct information about FTP server, username/password account and firmware filename from your supplier, and then do this upgrade. A status message about the percentage done in the upgrade procedure is displayed. Please be noticed that during the upgrade procedure, do not power off the IP CAM, otherwise, the IP CAM could probably enter into the safe mode(section 3.15). Aft

  • CMT IP Cam w, Day&night IP Camera A: It’s probably because the internet bandwidth (internet speed) is not big enough. Please try to apply for a better internet connection from your Internet Service Provider or decrease the bandwidth settings of the IP Cam. You can adjust the bandwidth requirement of the IP Cam either from the CamView software or login into the web configuration page of the IP Cam to do the modification. 9. Does the IP Cam provide the recording function? A: You can do the recording of the video/audio of the IP Cam from the CamView software with the CamView software. You can also do the video/audio recording to the standard NAS storage devic

  • CMT IP Cam w, Day&night IP Camera 3.5. Advanced Network In some special situation, your network environment only provides PPPoE connection(ADSL service), there is no NAT/router available. You will then need to set the PPPoE settings in the “Advanced Network” page. Only the PPPoE username and password are needed to let PPPoE work. After the “Save&Apply” button is pressed, the PPPoE function will work immediately. You can check the “Registration status” in the “Information” page to see if the IP CAM is registered using the PPPoE connection. Please be noticed that the DHCP or static IP settings in the “Network” page can work together with the PPPoE connection. Only t

  • Day&night IP Camera Appendix F. Third party and embedded web page integration For third party and embedded web page integration, IP Camera support the standard RTSP protocol and video/audio codecs needed by most generally used video play software, including Apple QuickTime and VideoLAN. The supported media protocols including TCP and UDP. IP Camera will automatically use T

  • CMT IP Cam w, Day&night IP Camera 3GPP/RTSP settings The IP CAM is able to be viewed from a 3G mobile phone, for detailed settings on the 3G mobile phone, please refer to Appendix E. Users can disable the 3G mobile access ability in this page. After the 3GPP/RTSP feature is disabled, no 3G mobile phone is allowed to access the video of the IP camera. When this is disabled, the rtsp stream with MPEG2 audio is still working, please refer to Appendix F for more details about rtsp stream with MPEG2 audio. When the 3GPP is enabled, the video frame rate, resolution and bandwidth for 3G mobile access could be set independently from the video settings for CamView(PC) access.

  • CMT IP Cam w, Day&night IP Camera very vague. For indoor usage, if there is strong sun light into the room, please select the “Indoor+sun light” choice. 12. Enable/disable audio microphone – you can enable or disable the audio microphone on the IP CAM. If disable, there will be no voice on the CamView video viewing. 13. Enable/disable time display on video – if enabled, the date/time of the system will be displayed on the left-upper corner of the video. When this modification is “Save&Apply”ed, it works immediately, but all the connected video viewing users will be disconnected. Figure 3-11: Video settings page 2

  • CMT IP Cam w, Day&night IP Camera 2.3. Wireless connection (for IP Cam(w)) The IP CAM can also be connected to the home/office network through the 802.11 b/g wireless connection. There are only three things that you need to do to have the wireless connection: 1. Set the WiFi security settings on the web configuration page. 2. Test if the WiFi settings are correct. 3. Unplug the Ethernet cable. First, set the WiFi security settings on the web configuration page. Make sure there is a WiFi router or AP on your home or office net

  • CMT IP Cam w, Day&night IP Camera 2. Hardware description and quick installation/usage The IP CAM is designed to be very easy to install and use. First, let’s see the major components of the IP CAM products. 2.1. Major hardware components. The major components on the front panel of the IP CAM products are the built-in microphone, lens and LEDs : 1. Microphone – for receiving the audio/voice. Effective distance is about 5 meters. 2. Lens – the focus of the lens is fixed, you do not need to spend time to adjust the focus, the effective focus range is from 30cm to infinity. 3. IR LEDs – there ar

  • CMT IP Cam w, Day&night IP Camera All the fields in this page must be filled correctly with the same settings the wireless router or AP using. Figure 3-8: WiFi security enabled page You can also click the “WiFi test” button to check if the IP CAM can connect to the wireless network for these settings. You will need to unplug the Ethernet cable to enable the wireless connection after the “WiFi test” is successful. After the setting and “Save&Apply”, do not need to restart the IP CAM to let the WiFi work, only need to unplug the Ethernet cable. The default setting is “Disable WiFi Function”. 20

  • CMT IP Cam w, Day&night IP Camera 4.2. Specifications Models IP Camera Power DC 5V, 1A Processors RISC CPU, hardware video processing and compression. Network interface Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45 Wireless interface IEEE 802.11g 6 - 54 Mbps IEEE 802.11b 1 - 11 Mbps Transmit power: 14.5dBm typically @ 802.11g 17.5dBm typically @ 802.11b Receiver sensitivity: 54Mbps: Typical -73dBm @ 10% PER 11Mbps: Typical -86dBm @ 10% PER Modes: Infrastructure and ad-hoc Antenna gain: 1.8 dBi

  • Day&night IP Camera Table of Contents 1. INTRODUCTION..........................................................................................................................5 2. HARDWARE DESCRIPTION AND QUICK INSTALLATION/USAGE ................................7 2.1. MAJOR HARDWARE COMPONENTS. .....................................................................

  • CMT IP Cam w, Day&night IP Camera Appendix D. Trouble shooting 1. What’s going on when the red led light on the IP camera is flashing? A: When the IP Cam is connected to the Internet and working correctly, the red led light will be on constantly. If the red led light is flashing, it’s probably because there is some network connecting problem. Please check the network connection again and follow the instructions on the user manual to set it up again. 2. When the IP Cam is connected to the network through wireless connection, the video quality is not good, how could I fix this problem? A: Whe

  • CMT IP Cam w, Day&night IP Camera 4. Features and specifications 4.1. Features ¾ Easily access the camera from anywhere in the world via the ID/password ¾ No complicated NAT/router settings needed. ¾ Free video management software - CamView program accompanied for easy access and multi-camera management. ¾ 3GPP/ISMA support. ¾ Dual video streaming with separate frame rate/resolution/bandwidth settings for PC and mobile. ¾ IR led control – support automatic, manual and scheduled modes. But only can

  • CMT IP Cam w, Day&night IP Camera 3.10. Scheduling The IP Camera provides the scheduling function for the motion detection triggered email/ftp sending and/or the NAS recording with the individual parameters set in the . “Email/ftp alarm” settings and the “NAS settings” page. Totally 12 schedule list items are allowed. There is no conflict check for the scheduling, it means that the scheduling time could be overlapped, and the IP camera will do all the scheduled events during the overlapped time period. For the scheduling of the Email/ftp sending and/or NAS recording, the “Schedule” option must enabled in the “Email/ftp alarm�

  • Day&night IP Camera 3.3. Network The Network page allows you to modify the network settings of the wired Ethernet. The default settings use DHCP to obtain an IP address automatically. In most of the home and office network environment, there is a DHCP server running. In this situation, by using this default settings, the IP CAM can work immediately in most of t

Related Products and Documents (IP Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Panasonic ES246AC Operating manual panasonic/es246ac-HCA.pdf 19 Mar 2023 12 0.21 Mb
2 ADTRAN 650 Quick start manual adtran/650-BU1.pdf 21 Oct 2023 4 1.94 Mb
3 INSTEON Mini Remote 2342-242 Owner's manual insteon/mini-remote-2342-242-P4C.pdf 04 Feb 2024 16
4 Pioneer AVH-P7600DVD Installation manual pioneer/avh-p7600dvd-8PH.pdf 01 Mar 2024 34
5 Kenwood KFC-HQ105 Service manual kenwood/kfc-hq105-E61.pdf 03 Jan 2024 1
6 Freecom VALUELOADER LTO Operation & user’s manual freecom/valueloader-lto-6X1.pdf 18 Oct 2022 88 0.64 Mb

Similar Resources:

  • Clas Ohlson

    RC8020

    (44 pages)
    E N G L I S HIP CameraArticle number 36-3379 Model RC8020 18-2115 RC8020-UK  …
  • Vitek

    Transcendent Series

    (16 pages)
    VITEKVITEK VT-TPTZ20HR-2PNSTranscendent Series 2 MegaPixel 1/2.8” 20x PoE+ IP Speed Dome CameraQUICK START GUIDEFEATURES • 1/2.8” 2MP Sony STARVIS® CMOS Progressive Scan Sensor • Superior Image Quality via High MTF 20x Zoom Lens and STARVIS® to Capture Vivid Color Images in Low Light Conditions • Max 30fps @ 2MP • True WDR (Wide Dynamic Ra …
  • EverFocus

    EZN3261

    (78 pages)
    EZN Series Outdoor IR Bullet IP Camera 10x Optical Zoom, Auto Focus, True Day/Night, WDR, IP66 User’s Manual Copyright © EverFocus Electronics Corp, Release Date: March, 2014 …
  • HIKVISION

    DS-2DM1-612X

    (8 pages)
    Hikvision Technical Manual DS-2DM1-612X/602X IP Speed Dome Technical Manual ©2006 – 2010 by HIKVISION. All rights reserved. 1 …
  • Cisco

    PVC300 - Small Business Pan Tilt Optical Zoom Internet Camera Network

    (2 pages)
    Quick Start GuideCisco Small BusinessModel PVC300PTZ Internet Camera with Audio and PoEPackage Contents• PVC300 Camera• Power Adapter• Setup and Documentation CD• Quick Start Guide• Ceiling Mount Brackets and Screws• 6-Foot Ethernet CableBefore You BeginTo configure the Cisco PVC300 camera, you need at least one computer with an active LAN IP con …
  • GeoVision

    GV-Fisheye SERIES

    (55 pages)
    Quick Start GuideGV-Fisheye IP Camera© 2014 GeoVision Inc. All rights reserved.Thank you for purchasing GV-Fisheye IP Camera. This guide is designed to assist the new user in getting immediate results from the GV-Fisheye IP Camera. For advanced information on how to use the GV-Fisheye IP Camera, please refer to GV-Fisheye IP Camera User's Manual on Sof …

Comments, Questions and Opinions: