DynDNS DDK-1500 Installation & Operation Manual

Text of DynDNS DDK-1500 User Guide:

• 37  Change the Network Setting — IP Filter The “Network” page has, on its upper left, the “IP Filter” icon. Please follow the steps below to change the IP Filter setting through the network if necessary. 1. Click the IP Filter button at upper left above to enter the “Network Setting” page. 2. Click “Enable IP Filter” to checkmark the attached

• 105 APPENDIX 6. –FAQ 1. How to disable the DHCP function and use a static IP instead? A：Turn up the “DIP SWITCH” from “3” to “4” and change the relative network settings, the IP Address, NetMask and Gateway on the image web page. 2. Can the SD card be removed during recording? A：No, it cannot be removed until the recording comes

• DynDNS DDK-1500, 44  Change the System Setting — RS485 Setting. Click the RS485 Setting button on the left side of the “Date and Time” page to enter the “RS485 Setting” page. Description of function keys: Baud rate: Eight different speeds can be used: 2400 baud per second, 4800 baud, 9600 baud, 19200 baud, 28800 baud, 38400 baud, 57600 baud and 115200 baud. Type: Choose one of the types. Device ID: You have the option of using an ID code (any number between 1 and 255). Raw format: Set to transmit the ASCII codes. Canonical format: Set to transmit the character string.

• DynDNS DDK-1500, 59 5.2.3 Login the Network camera software Once the IP surveillance is executed, a Login prompter will appear. You must enter the default User Name: root, and the password: Admin in the respective spaces. Click the “OK” button and enter the console page of the IP surveillance: both the user name and password must be entered correctly. Click the “Cancel” button and exit the login of the Network Viewer. View the Network camera video from a remote PC Follow the instructions below to use the IP surveillance to browse a Network camera video from a remote location. Upon entering the IP surveillance, a connect

• DynDNS DDK-1500, 48  Change the Application Setting —Language Setting. Please follow the steps below to change the Language setting via the network if necessary. 1. Click the Language button on the left side to enter the “Language Setting” page. 2. You have an option as to which language to use. The default is “English” 3. Click your selected language and click "Submit" to set it.

• 94 Figure15 Step 3: Click the Services icon in the Administrative Tools dialog box. See Figure16. Figure16 Step 4: When the Services dialog box shows up, double click the SSDP Discovery Service icon. See Figure17.

• DynDNS DDK-1500, 1 Table Of Contents SAFETY PRECAUTIONS .............................................................................3 1. PRODUCT FEATURES.............................................................................4 1.1 PRODUCT INSTRUCTIONS .....................................................................4 1.2 PRODUCT FEATURES ...........................................................................5 1.3 TECHNICAL SPECIFICATIONS ................................................................5 2. DESCRIPTION OF THE FRONT/REAR VIEW.........................................7 2.1 FR

• DynDNS DDK-1500, 85 APPENDIX 1. –SCANIP Follow the instructions below to use the SCANIP software to search the IP camera devices from a local location. 1. Click the button to discover the connection of the all-type device in the LAN. The Device List will display the connection of the all-type device. 2. Select the desired device from the Device List. 3. Click the desired device to show the window while the IP camera information acts to display the desired changes instantly. 4. Do you want to automatically search free IP? If and when you want to automatically search the free IP, select “Yes” or “No”. If you click “Yes” the soft

• DynDNS DDK-1500, 54 5.1.7 Change the Pan/Tilt setting Click the Pan/Tilt button on the home page to open the Speed Dome Controller. 1. Click “Configure” to enter to the RS485 setting page (please refer to Change the System Setting — RS485 Setting). 2. Select a Speed Dome device ID from the drop-down list on the Speed Dome Controller. The Controller will display the corresponding ID. 3. Each of the ten buttons under ‘Set’ is connected with a specific position and angle of either panning or tilting of the camera. Click each button to activate its particular

• DynDNS DDK-1500, 89 Figure 2 Step 2: When Control Panel appears, double-click the Network Connections icon. The Network Connections dialog box appears. See Figure 3. Figure 3 Step 3: Click the Protocols tab in the Network Connections dialog box. See Figure 4. Figure 4 Step 4: When the Local Area Connection Properties dialog box shows up, choose Internet Protocol (TCP/IP) and click Properties. See Figure 5.

• DynDNS DDK-1500, 34 Description of function keys: Enable DDNS Function: Checkmark to activate the function. DDNS Type: Click to open the list of two DDNS modes to choose from: “DynDNS” and “hn”. Click the “Apply” button and connect this website automatically and enter it. Type in your dynamic IP Address and Email Address. If they are accepted by the website, you will get an Email containing your DDNS Account and DDNS Password in your Email box. DDNS Host Name: Type in your host name in the attached space. DDNS Account: Enter it in the given space. DDNS Password: Enter it

• DynDNS DDK-1500, 43  Change the System Setting — Audio Mechanism. Please follow the steps below to change the Audio Mechanism through the network if necessary. 1. Click the Audio Mechanism button on the left side of the “Date and Time” page to enter the “Audio Mechanism Setting” page. 2. Mark the “Audio Mechanism” “ON” or “OFF”. 3. Click the Submit button to submit the new user’s settings. 4. Click the Home button to return to the home page. NOTE: This setting is for turning the audio mechanism of the Camera on/off automatically. The Live audio service is only provided in the MPEG4 mode via the Web browser. Description of function keys: Audio Mechanism: Se

• DynDNS DDK-1500, 39 5.1.4 Change the System Setting Please follow the steps below to change the date and time of the system setting through the network if necessary.  Set the Date and Time of the system 1. Click the System button in the home page to enter the “Date And Time” page (default). 2. Choose one of the three modes shown on the page to set the Date and Time of the system. The three modes are “Set Manually”, “Synchronize With Computer Time”, and “Synchronize With SNTP Server”. 3. Click the Submi

• DynDNS DDK-1500, 31 Description of function keys: IP Address: Enter the 4-byte IP Address in the appropriate blank space (the value in each box may be anywhere between 0 and 255). Every IP camera has to own an IP address to be identified on the network. Netmask: Fill in the 4-byte Subnet Mask in the required blank spaces (usually any numbers between 0 and 255). It is used to identify the subnet where the IP camera is sited. Default Gateway: Type in the 4-byte Gateway in the relevant blank spaces (each unit value must be

• DynDNS DDK-1500, 53 5.1.6 Change the SD card Setting Please follow the steps below to change the SD card setting through the network if necessary.  Change the SD card Setting — FILELIST of MEMORY CARD. Please follow the steps below to change the setting via the network if necessary. 1. Click the “SD card” button at the bottom of the home page to enter the page containing the “FILELIST of MEMORY CARD”. The page comes in two modes, the JPEG and the AVI (please refer to the “SD card Application Setting Page”). 2. Click the desired file to display the images therein. 3. Each file can be deleted by clicking the attached

• DynDNS DDK-1500, 11 3. INSTALLATION Please follow the instructions and the diagram below to set up the system. NOTE: The ipxcam is linked by its Video Out connection via a BNC connector to a monitor's Video In connection. If this connection is there, you can see some information on the monitor screen, such as the IP camera factory default Static IP address(192.168.1.168). But the IP camera Static IP address can only appear if there is a connection between the IP camera and another device. If there is no such connection, the IP camera factory default Static IP address will not appear on the monito

• DynDNS DDK-1500, 56 Test: Go to the Internet. 1. Set your PC to enter the Internet. 2. Desktop → IE browser → Type in the IP camera IP address (the same address as in the PPPoE settings and step 3 above) → You can see the ipxcam’s images. DDNS settings 1. Check your IP camera’s IP address ( Scan IP software or monitor ) → open your IE browser → Use the address to connect to the ipxcam or view the images → Choose the network → Type in “User name : root” and “Password : Admin” → Click “OK” . 2. Choose the “DDNS” → Click “Enable DDNS” → Enter the “DDNS host name”, for example “abc123. homeip.net” → Type in “DDNS Account”, for example

• DynDNS DDK-1500, 30 5.1.3 Change the Network Setting Please follow the steps below to change the network setting through the network if necessary.  Set the network options and IP address. 1. Click the Network button in the home page to enter the Network page. 2. The accessible networks here are the “SNTP”, “DDNS”, “PPPoE”, ”UPnP” and the ”Traffic”. 3. Fill in the “IP Address”, “Netmask”, “Default gateway”, “Primary nameserver”, and “HTTP Port” if necessary. 4. Click the Submit button to submit the new network setting. 5. Click the Home button to return to the home page.

• 24 5. Operating Instructions for Image Software and Network Two choices of software are available for linking with the IP camera: (1) the Microsoft Internet Explorer; and (2) the IP camera VIEWER, a network browser in a PC which provides the functions of monitoring remote zones or watching recorded data through the TCP/IP protocol. The details are li

• DynDNS DDK-1500, 70 (1) Global Settings  Monitor setup: Sets the date/time mode and display mode, and controls the CPU use percentage on five levels.  Default Directory: Sets the default files’ saving path. Click to select the directory. (2) Event Notification  Channel Prompt: Sets each camera to activate or deactivate the three modes of "Motion Buzzer", "Sensor Buzzer", and "Alarm Focus". Tick mark the blank space for each device to activate it.

• 32  Change the Network Setting — SNTP. Please follow the steps below to change the SNTP setting through the network if necessary. 1. Click the SNTP button at upper left above to enter the “SNTP Server Setting” page. 2. Enter the IP Address of the SNTP server, and choose one of the time zones as and when necessary. 3. Click “Automatically Adjust for Daylight Sa

• DynDNS DDK-1500, 51  Change the Application Setting — Alarm Application Enable Setting. Please follow the steps below to change the setting via the network if necessary. 1. Click the Enable Alarm button on the left side of the record to enter the “Alarm Application Enable Setting” page. 2. Click “Enable Alarm – Trigger an Alarm When Ethernet Is Lost” to checkmark the attached box and activate the function. 3. Click “Enable Alarm – Save Into SD card” to checkmark the attached box and activate the function. 4. Enter the "Alarm Duration" you have chosen. 5. Click the Submit button to submit the new s

• DynDNS DDK-1500, 3 SAFETY PRECAUTIONS All the following safety and operational instructions to prevent harm or injury to the operator(s) or other persons should be read carefully before the unit is activated. WARNING  To prevent fire or shock hazard, avoid exposing this unit to rain or moisture.  Do not block ventilation openings.  Do not place anything on top of the unit that might spill or fall into it.  Do not attempt to service this unit yourself, as opening or removing covers may expose you to dangerous voltage or other haz

• DynDNS DDK-1500, 74 The user has to modify the “Sequence Views Setting” to make it work. For example, if you want to see the 4-window sequence, please follow the steps given below: Step 1: Click the Sequence Views button to enter the Sequence Views setting page. Step 2: Select the “4 SEQ views” and the 4-windows will show in the Location Setting area. Step 3: Select one of the four channels (Location1-4), then click the “Setting” button. Step 4: The 4 SEQ View(s) page will show below. Choose the device(s) and set

• DynDNS DDK-1500, 57 5.2 The IP camera IP Surveillance This section provides instructions for installing and using the IP surveillance and Image Viewer, which are included with the IP camera. The programs can be operated by a selected PC equipped with the following requirements. System Requirements  Intel Pentium 1.5 GHz processor or above (2.8 GHz or higher recommended).  128-MB RAM at least (256-MB or higher recommended).  Windows 2000, XP or above.  4 MB VGA card capable of 24-bit true color display.  100 MB free hard-disk space for so

• DynDNS DDK-1500, 79 5.2.4 The Image Viewer The Network camera is equipped with a digital watermark. It's a checking software which protects archived images and informs you whether the images have been modified or not. Follow the instructions below to open an archived image from an SD card or an HDD. This is image integrity-protection software. It not only allows you to view an archived image from the SD card or HDD of a computer, but also protects an archived image from reproduction or interpolation. If an image isn’t in the original format made by a Network camera, the Image Viewer will not display the image and inst

• DynDNS DDK-1500, 66 NOTE: To view the alarm lists of a camera which were recorded, please (1) click the icon (2) the Alarm List window will appear as shown below, (3) select a camera from the drop-down list, then (4) click the “Search” button. 4. Move to the left/right area. 5. Recorded video list box. This box allows you to access all recorded video, which are stored in the HDD of the connected devices. 6. Playback function bar.  Play - Click to a recorded video from the PLAY LIST.  Stop - Click to stop playing back a recorded video or cease recordi

• 67  Play Rate: During play mode, please use the scroll bar to control the show speed. 7. Shows the device title. 8. This allows you to search a recorded video kept in the HDD of the device. Enter the MONTH /DAY /YEAR /HOUR /MINUTE you wish to search and click to proceed. 9. Functions to fit the starting and ending points of an image display, wh

Related Products and Documents (IP Camera):

Comparable Devices:

Similar Resources:

• Vitek Transcendent Series (12 pages) VITEKVITEKPLEASE NOTE: Complete User Guide, Software, Tools, and Updates are available online. Scan the QR Code or visit:http://www.vitekcctv.com/DownloadsVTD-TND6FPTranscendent Series 6 Megapixel H.265 IP Vandal 360° Fisheye Camera w/6 IR LEDsQUICK START GUIDEFEATURES• 1/2.9” 6.0 MegaPixel CMOS Image Sensor• Up to 30fps live view @ 6 MegaPixel• Mu …

• Lilin IPS4184E (49 pages) 66-IPS520CSEMERIT LILIN ENT. CO., LTDhttp://www.meritlilin.comOutdoor 2MP 18X/20X/30X PoE D/N HD Fast Dome IP CameraIndoor 2MP 18X/20X/30X D/N HD Fast Dome IP Camera2MPOutdoor/Indoor 1.3MP 22X PoE D/N HD Fast Dome IP Camera10X PoE D/N HD Fast Dome (IR) IP CameraIPS4184E/4188E, IPS4204E/4208E, IPS4304E/4308EIPS5184/5188/5180E, IPS5204/5208/5200E, IPS5304/5308 …

• Velleman CAMIP21 (75 pages) CAMIP21 HD IP COLOUR CAMERA IP-KLEURENCAMERA CAMÉRA COULEUR IP CÁMARA IP A COLOR HD HD IP FARBKAMERA WIFI - PLUG AND PLAY USER MANUAL 3 GEBRUIKERSHANDLEIDING 17 MODE D'EMPLOI 31 MANUAL DEL USUARIO 45 BEDIENUNGSANLEITUNG 59 …

• ICI 8000 Series (23 pages) 8000 SERIES IR CAMERAUSER MANUALPLEASE READ THIS MANUAL BEFORE SWITCHING THE UNIT ON.IMPORTANT SAFETY INFORMATION INSIDE.2105 W. Cardinal Dr. Beaumont, TX 77705ICI cameras fall under US Federal Law and Export Control.THIS DEVICE IS INTENDED FOR ADJUNCTIVE USE WITH OTHER CLINICAL DIAGNOSTIC PROCEDURES     …

• DynDNS DDK-1500 (107 pages) Before trying to connect or operate this product, please read this manual completelyINSTALLATION &OPERATION MANUALMPEG-4 IP CAMERA(NTSC)High Resolution Day & Night (PoE)DDK-1500 …

• Crestron UC-SB1-CAM-FLEX (2 pages) Crestron® UC Video Conference Smart Soundbars (UC-SB1-FLEX and UC-SB1-CAM-FLEX) are designed for use with Microsoft Teams® Rooms systems to facilitate conferencing in small to medium-sized meeting spaces with a built-in microphone, speakers, and camera (UC-SB1-CAM-FLEX only).NOTE: With the exception of the integrated camera, the UC-SB1-FLEX and UC-SB1-CAM- …

Comments, Questions and Opinions: