SingCam IP Cam w Operation & User’s Manual

Text of SingCam IP Cam w User Guide:

• SingCam IP Cam w, Day&night IP Camera 4. Features and specifications 4.1. Features ¾ Easily access the camera from anywhere in the world via the ID/password ¾ No complicated NAT/router settings needed. ¾ Free video management software - CamView program accompanied for easy access and multi-camera management. ¾ 3GPP/ISMA support. ¾ Dual video streaming with separate frame rate/resolution/bandwidth settings for PC and mobile. ¾ IR led control – support automatic, manual and scheduled modes. But only can see black & white video when IR led is on. ¾ Built-in Web server for

• SingCam IP Cam w, Day&night IP Camera 3.6. Video Settings The IP CAM is designed to provide high quality video for viewing from CamView software. In this page, you cam modify some settings related to the video viewing: 1. Password(play video) – this is the password needed for viewing the video from the CamView software. Together with the IP CAM ID, you can view the video of this IP CAM anywhere in the world through the Internet. 2. Internet speed – this is the Internet bandwidth of your network environment. Higher value will generate hi

• SingCam IP Cam w, Day&night IP Camera 3GPP/RTSP settings The IP CAM is able to be viewed from a 3G mobile phone, for detailed settings on the 3G mobile phone, please refer to Appendix E. Users can disable the 3G mobile access ability in this page. After the 3GPP/RTSP feature is disabled, no 3G mobile phone is allowed to access the video of the IP camera. When this is disabled, the rtsp stream with MPEG2 audio is still working, please refer to Appendix F for more details about rtsp stream with MPEG2 audio. When the 3GPP is enabled, the video frame rate, resolution and bandwidth for 3G mobile access

• SingCam IP Cam w, Day&night IP Camera 3.16. Set to factory default For some reason, for example you forgot the web login password, you may want to set the IP CAM to the factory default settings. The only thing you need to do is using a stick to press the “reset” button on the back of the IP CAM body for more than 4 seconds and release it, do this when the IP CAM is powered on. The IP CAM will reset to the factory default settings and restart automatically. The web login account will be “admin” (no password), the pl

• Day&night IP Camera ceiling. 2. Power jack – this is the place to plug in the power adaptor. The power needed for this IP CAM is 5V/1.0A, please make sure you are using the correct power adaptor. 3. Ethernet jack – this is the place to plug in the RJ45 Ethernet cable. When the Ethernet link is ok, the Ethernet indication LED on the front side will be blue light. 4. Re

• Day&night IP Camera 5. Package contents Figure 5-1: IP Camera body Figure 5-2: Power Adaptor Figure 5-3: Bracket Figure 5-4: Antenna Figure 5-5: Quick installation guide Figure 5-6: Ethernet cable Figure 5-7: Installation CD Figure 5-8:

• SingCam IP Cam w, Day&night IP Camera 3.4. WiFi security (For IP cam(w)) You can use the wireless to connect the IP CAM to the network. If your network environment has a 802.11 b/g router or AP running, you can check the “Enable WiFi function” button to use the wireless. Figure 3-7: WiFi security disabled page In order to use the wireless network, you need to fill the following fields: 1. SSID – this is the ID of the wireless router or AP of your wireless network environment, must be set correctly. 2. Security mode – this is the secur

• SingCam IP Cam w, Day&night IP Camera supported. All the fields in this page must be filled correctly with the same settings the wireless router or AP using. Figure 3-8: WiFi security enabled page You can also click the “WiFi test” button to check if the IP CAM can connect to the wireless network for these settings. You will need to unplug the Ethernet cable to enable the wireless connection after the “WiFi test” is successful. You can click the “WiFi scan” button to scan for all the available access points nearby. If you want to define fixed IP address when using WiFi connection, ple

• SingCam IP Cam w, Day&night IP Camera 4.2. Specifications Models IP Camera Power DC 5V, 1A Processors RISC CPU, hardware video processing and compression. Network interface Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45 Wireless interface IEEE 802.11g 6 - 54 Mbps IEEE 802.11b 1 - 11 Mbps Transmit power: 14.5dBm typically @ 802.11g 17.5dBm typically @ 802.11b Receiver sensitivity: 54Mbps: Typical -73dBm @ 10% PER 11Mbps: Typical -86dBm @ 10% PER Modes: Infrastructure and ad-hoc Antenna gain: 1.8 dBi Image sensor RGB VGA 1/4 inch CMOS Automatic exposure control, automatic white balance, automatic gain control, automa

• SingCam IP Cam w, Day&night IP Camera 3.13. Upgrade If there is some new firmware available from the supplier of this IP CAM, you can upgrade the firmware on this page. Please ask for the correct information about FTP server, username/password account and firmware filename from your supplier, and then do this upgrade. A status message about the percentage done in the upgrade procedure is displayed. Please be noticed that during the upgrade procedure, do not power off the IP CAM, otherwise, the IP CAM could probably enter into the safe mode(section 3.15). After the upgrade proc

• SingCam IP Cam w, Day&night IP Camera Appendix F. Third party and embedded web page integration For third party and embedded web page integration, IP Camera support the standard RTSP protocol and video/audio codecs needed by most generally used video play software, including Apple QuickTime and VideoLAN. The supported media protocols including TCP and UDP. IP Camera will automatically use TCP or UDP media stream depends on the connection request. The video codec supported is MPEG4, the audio codecs supported are AMR-NB and MPEG2-audio.

• SingCam IP Cam w, Day&night IP Camera Led Display Control The IP CAM provides the Led Display Control function, you can enable or disable the led display/indication on the front panel of the IP cam device. The related settings are explained below: 1. Normal led display – select this to enable the status led and ethernet led display. 2. Turn off led display always – select this to disable the status led and ethernet led display. 3. Turn off led display after network connected – select this then the led will display when the Internet connection has some problem, the led display will

• SingCam IP Cam w, Day&night IP Camera Appendix C. Performance Information 1. Video Performance Information The video quality is dependent on the video parameter settings and the network quality. If you want to have a better video quality, you will usually set higher resolution and higher frame rate. This is fine when you are viewing the video locally in the same network. But when you want to see the video remotely through the Internet, you need to know the Internet speed (bandwidth) connected to your home network. If the “Internet speed” setting of your IP camera is very large, b

• SingCam IP Cam w, Day&night IP Camera have more convenient video display, please refer to the user manual of the CamView software for more functions. Seeing the video in a remote location After the IP CAM is installed and you can see the video from the CamView software in the local network, it’s very easy to see the video in a remote location. All you need to do is add a camera item in the “CameraList” folder of the CamView software, key in the IP CAM ID and Password(from the ID/Password card). And then double click this camera item. You will then see the Camera video immediately. No

• SingCam IP Cam w, Day&night IP Camera 3.14. Reboot You can restart the IP CAM manually on this page. All the connected video viewing users will be disconnected. Figure 3-22: System reboot settings page Figure 3-23: System reboot under-going page 38

• SingCam IP Cam w, Day & Night, wired/wireless IP Camera Model : IP Cam/IP Cam(w) User Manual Revision: 020308 Date: 2010/06/21 For firmware version v020308 IP Cam(w) for wireless model IP Camera : for both wired and wireless model

• Day&night IP Camera Appendix D. Trouble shooting 1. What’s going on when the red led light on the IP camera is flashing? A: When the IP Cam is connected to the Internet and working correctly, the red led light will be on constantly. If the red led light is flashing, it’s probably because there is some network connecting problem. Please check t

• SingCam IP Cam w, Day&night IP Camera 3. Web configurations You can login into the web configuration page by directly key-in the IP address of the IP CAM or right-click the searched IP CAM in the “Auto Search” list of the CamView software and click the “Web Configure” to open the login window of the IP CAM. Figure 3-1: Open the web configuration page from CamView software The default login account is “admin”, leave the Password field empty. Figure 3-2: IP CAM Web configuration login page 14

• SingCam IP Cam w, Day&night IP Camera Figure 5-3: Bracket Figure 5-4: Antenna Figure 5-5: Quick installation guide Figure 5-6: Ethernet cable Figure 5-7: Installation CD Figure 5-8: ID/Password Card Table A-1: List of tested Wireless AP/router devices Table A-2: List of tested Wired NAT/router devices 4

• Day&night IP Camera Bandwidth : 64k, 128k, 256k, 512k, 768k, 1M, 1.2M, 1.5M bps Frame rate : 1~5, 10, 15, 20, 25, 30 fps Audio Built-in microphone for audio monitoring Audio compression: MPEG2 audio, AMR-NB for 3GPP/ISMA Security Web management username/password protection Video display ID/password protection WiFi WEP and WPA security mode Installation, management and

Related Products and Documents (IP Camera):

Comparable Devices:

Similar Resources:

• Santec SNC-3901MDN (44 pages) Version 1.3n-f/1110/engl/A6 USER MANUAL 1.3 MP IP day/night camera Models SNC-3901MDN SNC-5211MIR SNC-6201M SNC-3901MDN SNC-5211MIR SNC-6201M Lens for SNC-3901MDN not included in the delivery. …

• D-Link DCS-6620 - Network Camera (24 pages) 1PTZ INTERNET CAMERADCS-6620Quick Installation Guide+Руководство по быстрой установке+Guía de Instalación Rápida+Guia de Instalação Rápida+快速安裝指南+Petunjuk Pemasangan Cepat+ …

• Paradox HD78F (2 pages) HD78F-EI00B 06 2016paradox.comHD78/FEvent-Driven Indoor SecurityIP Camera/DetectorInstallation Manual V1.0IntroductionThe HD78/F Event-Driven Indoor Security IP Camera combined with its Security Detector provide video/audio solution for security systems. It provides day/night vision at 720P and Hi-Fi audio recording, with over 40 minutes of internal event-r …

• Yealink VC210 Teams Edition (12 pages) Applies to firmware version 118.15.0.15 or later Video Conferencing EndpointVC210 Teams® EditionEnglish | 简体中文Quick Start Guide快速入门指南(V15.15)适用于118.15.0.15及之后的版本 …

• Nite Devil Anti-Vandal CAM320 (40 pages) NiteDevil HD-SDI CamerasHandbook &InstructionsManual Ref: XND-HD-02Stunning 1080p HD-SDI cameras with built in NiteDevil™ technology.Anti-VandalCAM320All-In-On IRCAM380TraditionalCAM341-344Mini BulletCAM360-362CovertCAM350-351 …

• AudioCodes RXVCam50 (15 pages) 1 | Page RXVCam50 AI HD Video Conference Camera User Manual This User Manual provides a brief introduction to the functions, installation, and operations of the RXVCam50 AI HD Video Conference Camera. The document describes two product flavors:  RXVCam50L. The field of view is 81 degrees (suitable for a Large room)  RXVCam50M. The field of vi …

Comments, Questions and Opinions: