StarVedia 802.11 n Operation & User’s Manual

Text of StarVedia 802.11 n User Guide:

• StarVedia 802.11 n, Pan/Tilt IP Camera 3.2. Video Display This display page allows you to view the video display and control the pan/tilt movement of the IP camera. For the first time use of this display on a computer, an activeX component will be automatically downloaded into the browser. This could take some time, depends on the internet speed. The component is downloaded from a public domain, so that the computer must be connected to the Internet. If you want to modify the video display screen size, please refer to section 3.6 for more details. Figure 3-4: Video display page

• Pan/Tilt IP Camera 3.8. Email/ftp alarm The IP Camera provides the Email/ftp function, you can enable or schedule the Email/ftp ability in this page, the IP Camera will then send out an email with a jpeg picture attached in the email and/or send out the jpeg picture file to a ftp server. The related settings are explained below: 1. Email/FTP trigger – choose betwee

• StarVedia 802.11 n, Pan/Tilt IP Camera Appendix D. Trouble shooting 1. What’s going on when the red led light on the IP camera is flashing? A: When the IP Cam is connected to the Internet and working correctly, the red led light will be on constantly. If the red led light is flashing, it’s probably because there is some network connecting problem. Please check the network connection again and follow the instructions on the user manual to set it up again. 2. When the IP Cam is connected to the network through wireless connection, the video quality is not good, how could I fix this problem? A: When the IP Cam is connected using wireless network and the video quality is not good, it’s p

• Pan/Tilt IP Camera 3.11. SD-Card settings The IP camera provides the recording of the video files into a standard Micro SD-Card. Since this recording is directly to the SD-Card, there is no network packets loss problem when recording to remote device through internet. Notice : when the IP camera is doing SD-Card recording, this is counted as one video user. Please

• StarVedia 802.11 n, Pan/Tilt IP Camera 3.15. Admin In this page, you can modify the web login account. With this account, you can login to the IP CAM and do any modifications. The default account is “admin” without password. If the login account is forgotten, you can reset the IP CAM to the factory default settings by following the steps in section 3.19 and login with the “admin” account. Please be noticed that this account is different from the video play password in the “Video settings” page. Figure 3-22: Admin settings page 40

• StarVedia 802.11 n, Pan/Tilt IP Camera 1. Introduction The Pan/Tilt IP Camera is designed with the “user-friendly” idea deep in mind. The user can install the IP camera easily on his/her home network and then access the IP Camera anywhere in the world through the accompanied video management software - CamView program without setting some complicated DNS name or changing the router’s settings. It’s just a plug & play action. With pan/tilt support, users can monitor the video in a much larger viewing angle range. For indoor surveillance and

• StarVedia 802.11 n, Pan/Tilt IP Camera 2.3. Wireless connection The IP CAM can also be connected to the home/office network through the 802.11 n wireless connection. There are only three things that you need to do to have the wireless connection: 1. Set the WiFi security settings on the web configuration page. 2. Test if the WiFi settings are correct. 3. Unplug the Ethernet cable. First, set the WiFi security settings on the web configuration page. Make sure there is a WiFi router or AP on your home or office network. Write down the WiFi security parameters used in this WiFi AP/router, including the SSID , security mode, e

• StarVedia 802.11 n, Pan/Tilt IP Camera 3.12. Scheduling The IP camera provides the scheduling function for the motion detection triggered email/ftp sending and/or the NAS recording with the individual parameters set in the . “Email/ftp alarm” settings and the “NAS settings” page. Totally 12 schedule list items are allowed. There is no conflict check for the scheduling, it means that the scheduling time could be overlapped, and the IP camera will do all the scheduled events during the overlapped time period. For the scheduling of the Email/ftp sending and/or NAS recording, the “Schedule” option must enabled in the “Email/ftp alarm” settings and/or the “NAS settings”.

• Pan/Tilt IP Camera accordingly. You can click the (x,y) axis of the patrol point to direct the view to this specific patrol point directly. After the patrol points are set, you can click the “Patrol” button to start the patrol through these points one time. 6. Stay xx secs – this is the time for each patrol point to stay before going to next patrol point. 7. Patr

• StarVedia 802.11 n, Pan/Tilt IP Camera 3.10. NAS settings The IP Camera provides the recording of the video files into a standard NAS ( Network Access Storage ) device. The IP camera connects to the NAS device using the standard LMX_NS/CIFS/SSN protocols that are the same as the Microsoft Windows network neighborhood protocols. This makes the IP camera easily record the video files to all the standard NAS devices in the market. Since there are a lot of different choices, including prices and scales, users can decide by themse

• StarVedia 802.11 n, Pan/Tilt IP Camera Figure 3-28: Stick the reset button to set to the factory default Figure 5-1: The IP camera body Figure 5-2: Power Adaptor Figure 5-3: Quick installation guide Figure 5-4: Ethernet cable Figure 5-5: Installation CD Figure 5-6: ID/Password Card Table A-1: List of tested Wireless AP/router devices Table A-2: List of tested Wired NAT/router devices 5

• StarVedia 802.11 n, Pan/Tilt IP Camera List of Figures and Tables Figure 2-1: Major components in the front panel Figure 2-2: Major components in the back panel Figure 2-3: IP CAM connection diagram. Figure 2-4: Connect Ethernet cable to a switch/router. Figure 2-5: The installation CD disk Figure 2-6: The ID/Password card Figure 2-7: Running window of CamView program Figure 2-8: Pop-up play-video password window Figure 2-9: Unplug the Ethernet cable to enable the WiFi function Figure 3-1: Open the web configuration page from CamView software Figure 3-2: IP CAM Web configuration login page Figure 3-3: IP CAM Information page Figure 3-4: Video display page Figure 3-5: Networ

• StarVedia 802.11 n, Pan/Tilt IP Camera 3.13. Led Display Control The IP CAM provides the Led Display Control function, you can enable or disable the led display/indication on the front panel of the IP cam device. The related settings are explained below: 1. Normal led display – select this to enable the status led and ethernet led display. 2. Turn off led display always – select this to disable the status led and ethernet led display. 3. Turn off led display after network connected – select this then the led will display when the Internet connection has some problem, the led display will be off when the Internet connection is successful. Figure 3-20: Led Control settings page 38

• StarVedia 802.11 n, Pan/Tilt IP Camera 3. Web configurations You can login into the web configuration page by directly key-in the IP address of the IP CAM or right-click the searched IP CAM in the “Auto Search” list of the CamView software and click the “Web Configure” to open the login window of the IP CAM. Figure 3-1: Open the web configuration page from CamView software The default login account is “admin”, leave the Password field empty. Figure 3-2: IP CAM Web configuration login page 15

• StarVedia 802.11 n, Pan/Tilt IP Camera 3.9. DI/DO settings The video server product provides DI/DO alarm function, a video motion detection or the digital input signal could trigger the digital output alarm. The duration of the alarm could also be set. The related settings are explained below: 1. Digital input – can select the normal status of the digital input as either open circuit or closed circuit. The current status is also displayed. 2. Digital output – can select the normal status of the digital output as either open circuit or closed circuit.

• Pan/Tilt IP Camera 3. Ethernet jack – this is the place to plug in the RJ45 Ethernet cable. When the Ethernet link is ok, the Ethernet indication LED on the front side will be blue light. 4. Reset button – this is the button to reset the IP CAM to default factory settings. You need to use a small stick like pencil or tooth stick to press the reset button for more than 3 seco

• StarVedia 802.11 n, Pan/Tilt IP Camera 2. Hardware description and quick installation/usage The IP CAM is designed to be very easy to install and use. First, let’s see the major components of the IP CAM products. 2.1. Major hardware components. The major components on the front panel of the IP CAM products are the built-in microphone, lens and LEDs : 1. Microphone – for receiving the audio/voice. Effective distance is about 5 meters. 2. Lens – the lens is inside the mask and the focus of the lens is fixed, you do not need to spend time to adjust the focus, the effective focus r

• StarVedia 802.11 n, Pan/Tilt IP Camera Appendix F. Third party and embedded web page integration For third party and embedded web page integration, the IP camera supports the standard RTSP protocol and video/audio codecs needed by most generally used video play software, including Apple QuickTime and VideoLAN. The supported media protocols including TCP and UDP. The IP camera will automatically use TCP or UDP media stream depends on the connection request. The video codec supported is H.264, the audio codec supported is G.711 audio. The access methods are the followings : rts

• StarVedia 802.11 n, Pan/Tilt IP Camera Table of Contents LIST OF FIGURES AND TABLES......................................................................................................4 1. INTRODUCTION..........................................................................................................................6 2. HARDWARE DESCRIPTION AND QUICK INSTALLATION/USAGE ................................8 2.1. MAJOR HARDWARE COMPONENTS. ......................................................................................8 2.2. QUICK INSTALLATION AND

More Instructions:

StarVedia 802.11 n Operation & user’s manual 25-09-2023 57

DOWNLOAD

Related Products and Documents (IP Camera):

Comparable Devices:

Similar Resources:

• HOME8 V33040US (4 pages) What’s inside:1x Security ShuttleWhat you’ll need:• Broadband Internet • iPhone or Android phone • Home router1x Ethernet cable5x Power cablesModel No. V33040US5x Power adapters4x Mini Cube HD camerasMounting accessoriesMini Cube HD 4-Camera Ultra-Secure Starter KitQuickstart Guide …

• urmet domus 1092 (12 pages) + DS1092-538 BALL CAMERA AHD 4M DAY & NIGHT 1/3” OTTICA VARIFOCAL 2,8-12MM CON LED IR 4M AHD DAY & NIGHT BALL CAMERA 1/3” 2,8-12MM VARIFOCAL LENS WITH IR LED AHD 4M TAG & NACHT KUGELKAMERA 1/3-ZOLL 2,8-12MM-OBJEKTIV MIT IR-LEDS CAMÉRA MINI-DÔME AHD 4M DAY & NIGHT 1/3” OPTIQUE VARIFOCAL 2,8-12MM A DIODES IR CÁMARA MINIDOMO AHD 4 …

• Axis M1114 (2 pages) DATASHEETAXIS M11 Network Camera Series oer excellent image quality with progressive scan and providing crisp and clear images of both illuminated and low-light areas. AXIS M11 Series ranges from SVGA-resolution cameras to 1-megapixel cameras, which also provide HDTV 720p full frame rate video. Multiple H.264 streams, as well as Motion JPEG …

• EYENIMAL PET VISION LIVE (14 pages) Guide d’installation Installation guide Guía de instalación Installationsanleitun Guida all’installazione PET VISION LIVE CAMERA DE SURVEILLANCE D’ANIMAUX DE COMPAGNIE …

• Reolink Lumus (31 pages) Reolink LumusOperational InstructionEN/DE/FR/IT/ESDec, 2019QSG1_ATechnical SupportIf you need help, please contact Reolink before returning your product. Most questions can be answered through our online support center at https://support.reolink.com.Technische UnterstützungWenn Sie Hilfe brauchen, kontaktieren Sie bitte Reolink Support Team zuerst, bevor S …

• Digimerge DCB54DL (2 pages) WARNING - A REGULATED UL / CSA APPROVED 12V DC / 24V AC power supply is REQUIRED for use with this camera. Use of a non-regulated, non-conforming power supply can damage this product and voids the warranty.Product InformationUser ManualsQuick Start GuidesSpecification SheetsVideo Tutorials & DemosLatest NewsContents700+ TVL VARIFOCAL IR BULLET CAMERAMODE …

Comments, Questions and Opinions: