Manualios.com

HTS C5 Operation & User’s Manual

HTS C5 Manual Online:

3, 1878 votes
HTS C5 User Manual
HTS C5 User Guide
HTS C5 Online Manual

Text of HTS C5 User Guide:

  • HTS C5, C C 5 5 User Manual page 25 6.6.8. Net Client Enabled = If the check box is checked. Will send result and the best image to SeeData application on a PC/Laptop connected to the same network. ServerIP = the IP address of the PC/Laptop that runs the SeeData Application. Port = TCP/IP port to connect with in the PC/Laptop. 6.7.Cars list management Page The page shows the list of the authorized cars. It is possible also to add a new authorized car,

  • HTS C5, C C 5 5 User Manual page 4 I. DOCUMENT REVISION HISTORY: DATE BY CHANGES SECTIONS APPROVED Mar 5, 2009 Yossi Eliyahu New document, based on C4 All Preliminary Mar 17, 2009 Yoram Hofman Logo, diagram I, 4.1 Preliminary April 5, 2009 Sherri Cizin Formatting All

  • HTS C5, C C 5 5 User Manual page 23 6.6.6. Motion detection Enabled = Checked when using motion detection instead of sensor. Sensitivity = Range 0-255. 15 is default. This parameter determine how Sensitive the motion detection algorithm will be. Hot rect top = where to start check for motion vertically. Hot rect left = where to start check for motion horizontally. Hot rect right = where to end check for motion horizontally. Hot rect buttom = where to end check for motion vertically.

  • HTS C5, C C 5 5 User Manual page 9 3.2.2.Monitoring Mode The unit may be used to simply report on the passing vehicles. This unit can be connected to other units via a local network (“intranet”) that reports the recognition results, including the captured image, to a central server. The transmission can be done by wireless or wired TCP/IP. 3.3. C C 5 5 versus SeeLane Our product line also includes powerful Windows PC-based solution – such as SeeLane. If a multiple-lane access control is required, we recommend instal

  • HTS C5, C C 5 5 User Manual page 13 4.5.Software Integration in a Network The unit can either operate as a stand-alone unit, or can connect to a central server using SeeData, a HTS utility that is used for network connectivity. The recognition result (including the image) is sent over the network as a TCP/IP packet, then intercepted by SeeData, and converted to a DDE message which is identical to the other HTS recognition systems such as SeeLane. The details of the DDE message are documented and supported by the SeeCar product line client application. The message contains the recognition string, the date and time, a lane number which identifi

  • HTS C5, C C 5 5 User Manual page 35 9. Support and more Information You can contact us for more information and assistance at: Hi-Tech Solutions: POBox #133 Migdal-Haemek Israel 10500 Internet http://www.htsol.com Email [email protected] Israel.....Tel (+972) 46 440 440 Visit our Home page http://www.htsol.com and download the latest versions from the on-line support page. For password - please contact us. A C C 5 5

  • HTS C5, C C 5 5 User Manual page 30 6.12.Live page The page shows the image from camera and refreshes fast enough to give the feel of a live video. Note: It is not recommended to stay in this page more than 2 minutes since it puts too much pressure on the system. When in the page the system will system work as usual and continue motion detection and recognition.

  • HTS C5, C C 5 5 User Manual page 20 6.6. Configuration Page This page shows the content of C C 5 5 .config which is the C C 5 5 configuration file. It is possible to change the parameters in the page and to submit the changes. The changes will take place (effect) immediately. Most of the parameters are limited to the right range but there are some "open" parameters in text boxes that are needed to be filled with specific way which is described in the paragraphs below. 6.

  • HTS C5, C C 5 5 User Manual page 18 6.5. Image Page 6.5.1. Procedure The page will show the current image from the C C 5 5 as it was taken in the minute that image was pressed. By default, the page will show the image from the local camera (the main camera, and most of the time the only camera) but it is easy to switch to the remote camera. Four levels of illumination are available. You can choose: off – no illumination, low, medium or high ill

  • HTS C5, C C 5 5 User Manual page 34 8. Software Update This section describes the procedure of updating the software, in case such an update is required. 8.1. Open putty and winscp to C C 5 5 As describe in section 7, connect the C C 5 5 with putty and Winscp. Transfer throw winscp the files for upgrade . In putty enter command: cd /home/hts chmod 777 * chown root:root * reboot After the restart the change will take effect.

  • HTS C5, C C 5 5 User Manual page 7 3.2.Typical installations 3.2.1.Access Control Mode The following figure illustrates how the system is typically installed at the entrance of a secured area. A sensor (such as a loop detector) indicates the presence of the car, which signals the C C 5 5 unit (behind the gate's boom) to start a new recognition sequence. The unit identifies the car, and if authorized – it opens the gate. Figure 3.2: a typical access-control installation For most secured areas the system can control the entrance only, while the exit will be

  • HTS C5, C C 5 5 User Manual page 5 1.Purpose & Scope This document provides general information on Compact Camera-Based Car Controller ( C C 5 5 ), a stand-alone vehicle access-control system. This document is intended for system users and provides all the information required operating the system. The C C 5 5 is the next generation version of the C 4 4 system, with more powerful on-board computer and additional functionalities. 2. Referenced Documents

  • C C 5 5 User Manual page 2 Table of Contents 1. PURPOSE & SCOPE 5 2. REFERENCED DOCUMENTS 5 3. OVERVIEW 6 3.1. PRODUCT DESCRIPTION ..................................................................................... 6 3.2. TYPICAL INSTALLATIONS ..................................................................................... 7 3.2.1.

  • HTS C5, C C 5 5 User Manual page 26 6.7.1. Add Member It is easy to add a member to the authorized car's list. Press the "Add Member" button and it will bring you to another page: It is recommended to fill all the fields but it is possible also to fill only the "Car Number" field. A "first name", "last name" will come to replace the missing details and it will be possible later to edit this record. Press the "Add to list" button and the record will be shown in the list.

  • HTS C5, C C 5 5 User Manual page 10 4. C C 5 5 Major Elements 4.1. Block Diagram The C C 5 5 access-control system architecture is illustrated in the following diagram. The peripherals on the left side are connected by a network connection. On the right side the inputs are power supply (a DC adapter connected to the mains), and an optional sensor (dry-contact indicating vehicle presence, such as a loop detector). The unit's internal motion detection can be used instead of the external trigger. The optional output is the gate relay

  • HTS C5, C C 5 5 User Manual page 22 6.6.4. Local Camera Enabled = Checked if there is a Local camera (the main camera ). Brightness = Range 0-255. 128 is default. Contrast = Range 0-127. 71 is default. CaptureOn = "rising" – trigger on rising edge. "falling" – trigger on falling edge. Illumination = Set the number of images the camera will capture. Each image is represented by the illumination level (0-3). Up to 6 images separated with comma in any illumination order can be set. 0 – off, 1 – low, 2 – medium, 3 – high.

  • HTS C5, C C 5 5 User Manual page 12 4.4. Software 4.4.1. General 1. C C 5 5 - The C C 5 5 unit is pre-loaded with files used to operate the system, as detailed below. 2. PC or laptop applications - used for installation and maintenance. 3. SeeData – This network connection utility may be ordered separately, and installed on a central server (each C C 5 5 unit can interface with it). These are detailed below. 4.4.2. Files loaded into C C 5 5 unit The C C 5 5 is shipped with the latest software components already installed in the factory. These are the major items installed within the unit: 1. C

  • HTS C5, C C 5 5 User Manual page 17 6.3. Main Menu Every page has this main menu on the left hand side of the screen. It is easy to navigate through the different pages and reach each topic from every page. 6.4. Home Page Currently the home page has only a welcome message. In the future only an authorized person can reach pages like configuration and cars list management.

  • C C 5 5 User Manual page 15 5.3.Advance user network setting The C C 5 5 IP configuration advance setting can also be done from terminal. Simply open terminal from the C C 5 5 or if you already connected to network throw Putty for example and login the C5 Enter: cd /etc/conf.d/ nano net You will receive the content

  • C C 5 5 User Manual page 32 Now you can edit / copy /replace all the configuration files. 7.2. Putty.exe PuTTY is a free implementation of Telnet and SSH for Win32 and Unix platforms, along with an xterm terminal emulator. Since the C5 system listens for SSH it is quit useful to communicate with C C 5 5 with putty. Firs

  • HTS C5, C C 5 5 User Manual page 16 6. Web-Server 6.1. Overview The web-server application is an integral part of the C C 5 5 supporting software and runs internally in the C C 5 5 (not on your PC/Laptop). The C C 5 5 has an intranet (internal internet) “web site” which can be viewed from any internet browser (such as IE, Netscape or Mozila). Using the web server, it is possible to perform the following operations:  capture the current image from the C C 5 5 with 4 different illumination levels (this action w

  • C C 5 5 User Manual page 27 6.7.2. Edit Member If a change in a member record is desired, by pressing the "Edit Member" button, the "Edit Member" page will come: 1. To edit a record you have to choose the record from the combo box. 2. The next step is the same as Add Member. Note: It is possible to change all the record parame

  • HTS C5, C C 5 5 User Manual page 3 6.12. LIVE PAGE ....................................................................................................... 30 7. ACCESSORIES 31 7.1. WINSCP.EXE .................................................................................................... 31 7.2. PUTTY.EXE ...................................................................................................... 32 8. SOFTWARE UPDATE 34 8.1. OVERVIEW ....................................................................................................... 34 9. SUPPORT AND MORE INF

  • HTS C5, C C 5 5 User Manual page 31 7. Accessories This section is for the advance user who needs to maintain and monitor the C C 5 5 . There are a few applications to enhance user control of the system. 7.1. Winscp.exe FTP/SCP/SFTP client GUI application. After downloading from the net it’s very simple to connect to C C 5 5 (password uploader). After login only in the first time dialog appear with warning press YES. After connection successes you should see:

  • HTS C5, C C 5 5 User Manual page 19 2. Check the radio button on every visit to the page Now, every visit to the page will load the new image that was taken while pressing the capture button. here here

  • HTS C5, C C 5 5 User Manual page 14 5. IP configuration 5.1. Overview The C C 5 5 IP configuration setting performed by user throw the server in the configuration page. In the configuration page user can change LAN properties and the wireless network properties. 5.2. Network properties The C C 5 5 factory default wireless network name is C5WIRELESS, without a password. For now the advanced wireless securities setting is disabled, though it should be available in the next C C 5 5 version. However, users can set the network with a MAC control which provides a good security environment.

Related Products and Documents (IP Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Coleman 9971-A50 Use, care & assembly manual coleman/9971-a50-A34.pdf 10 Apr 2023 16 1.25 Mb
2 HP DesignJet 800ps Brochure & specs hp/designjet-800ps-RXI.pdf 27 Nov 2023 195
3 Toastmaster TOV435RLB Use and care manual toastmaster/tov435rlb-H7Y.pdf 24 Aug 2023 24 0.44 Mb
4 Edirol MA-1EX Owner's manual edirol/ma-1ex-891.pdf 13 Dec 2022 32 1.49 Mb
5 Invicta SFI-80 Operator's manual invicta/sfi-80-N41.pdf 05 Mar 2024 18
6 Southwestern Bell FA970 Owner's manual southwestern-bell/fa970-122.pdf 29 Jan 2024 8 0.12 Mb

Similar Resources:

  • Conbrov

    DV087

    (10 pages)
    HD Mini key chain Camera User ManualModel: DV087Important Notice- Please ensure that you read the complete user manual carefully before using any part of the product.- Keep this copy safe for future reference in case of operational difficulties. …
  • DynaColor

    W series

    (2 pages)
    Full HD Multiple Streams Micro Dome IP Camera Quick Guide The Quick Guide is for quick installing and connecting the Full HD Multiple Streams Micro Dome IP Camera. For details, please refer to the IP Camera’s User Manual. Camera’s Connectors (for Indoor Only) …
  • Lilin

    AHD7324AX10

    (2 pages)
    F I G . 7F I G . 5F I G . 6Next, use the provided 1/4"-20UNC screws (silver-4pcs) to secure the camera bodyto the bracket with the hexagon screwdriver (FIG.7).Instruction ManualPart Description & DimensionsAHD IR CAMERAUnit: mmInstallation4. Loosen the pan and tilt adjustment screw on the bracket to turn the camera bodyto the desired angle and then …
  • FLIR

    CP-6302-30-R

    (2 pages)
    Quick Install GuideQuasar Gen IlI CP-6302-30-RIndoor 30x HD PTZ IP CameraA. Insert and Configure SD Card If local recording is required to store snapshots and/or recordings triggered by events, a microSDXC card (notsupplied) must be used. Insert a microSDXC card (up to 128GB, Class 10) in the SD card slot inside the camera housing (see diagramoverleaf).Repl …
  • Defender Security

    LVWDB20SM

    (2 pages)
    LVWDB20SM Colour Camera Specification Packing List No Name Model Number 2. User Guide LVWDB20SM 1 1. Vandalproof & Waterproof IR Dome Colour Camera LVWDB20SM 1 Franchiser: Notes:Before providing power for the camera, please read this User Guide in detail! Do not attempt to disassemble the camera. If the camera can not work, …
  • Oncam

    EVO-05NID

    (62 pages)
    1 Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range Version 2.4 | January 2014 | Oncam Grandeye, 115 Hammersmith Road, London. W14 0QH. UK T: +44 (0)20 7371 6640 | E: [email protected] | W: www.oncamgrandeye.com Installer Guide and User Manual for the Evolution Camera Range Oncam Grandeye This document cont …

Comments, Questions and Opinions: