Manualios.com

Siemens CCIS1337-LP Configuration Manual

Siemens CCIS1337-LP Manual Online:

4.65, 692 votes
Siemens CCIS1337-LP User Manual
Siemens CCIS1337-LP User Guide
Siemens CCIS1337-LP Online Manual

Text of Siemens CCIS1337-LP User Guide:

  • Unit description 18 Siemens Building Technologies Fire Safety & Security Products 04.2006 7.4 Accessing the unit’s home page There are two ways of accessing the unit’s home page: z Using Internet Explorer z Using the Web-Cam IP Manager 7.4.1 Accessing the unit’s home page with Microsoft Internet Explorer 1. Type the IP address that is allocated to the device in

  • Siemens CCIS1337-LP, Configuration 38 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.5.2 Setting the exposure 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. 2. In the Configuration menu, select the menu option Camera and the Exposure Settings suboption. Î The Exposure Settings dialog will appear: Fig. 8 Exposure settings 3. Enter the desired settings in this dialog. Operating mode Set the exposure level here. The following options are available: z ALC Automatic aperture control z ELC Electronic shuttering Shutter This will set the elec

  • Siemens CCIS1337-LP, 4 Siemens Building Technologies Fire Safety & Security Products 04.2006 Table of contents 1 Functional description............................................................................7 2 Safety........................................................................................................8 2.1 Intended use .............................................................................................8 2.2 Target Group........................................................

  • Siemens CCIS1337-LP, Configuration 30 Siemens Building Technologies Fire Safety & Security Products 04.2006 Manual IP address and subnet mask allocation 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. 2. Select Network settings in the Configuration menu. Î The Network settings dialog opens: 3. Enter the unit’s IP address. 4. Enter the unit’s subnet mask. 5. Enter the gateway. See Section 10.2 Configuring network settings. 6. Restart your IP camera. See Section 10.8 Restarting the camera. IP address: Only one IP address may be assigned per unit. We recommend using the ranges 192.168.x.x and 10.x.x.x when

  • Siemens CCIS1337-LP, Technical specifications 11 Siemens Building Technologies Fire Safety & Security Products 04.2006 4 Technical specifications 4.1 Dimensions 4.2 Product specification CCD type 1/3” SONY Exview CCD DSP SONY HQ1 Scanning system 2:1 PAL interlace, vert. 50 Hz, hor. 15.625 Hz Active pixels 752 x 582 active pixels Synchronization Internal: quartz External: line lock synchronization (AC only) Video output FBAS: 1.0 Vpp (75 Ω), BNC Y/C : Y: 1.0 Vpp / C: 0.3 Vpp (75 Ω), 4 pin mini DIN Lens jack CS-mount Horizontal resolution Color: 540 lines B/W: 570 lines with Y/C output Gamma correction 0.45 / 1 Minimum illumination: Color: 0.

  • Siemens CCIS1337-LP, Configuration 35 Siemens Building Technologies Fire Safety & Security Products 04.2006 3. Enter the desired settings in this dialog. 4. Select the quality level for each resolution from the options in the Quality dropdown list. 5. We recommend that you set the quality level to Medium. 6. Select the font size for the text overlay from the options in the Display Font Size dropdown list: The following options are available: z – (no text overlay) z Small z Large 7. Click Save.

  • Siemens CCIS1337-LP, Unit description 21 Siemens Building Technologies Fire Safety & Security Products 04.2006 7.5.1 PTZ control The PTZ operating panel enables a pan/tilt drive with SCU protocol to be controlled. 1. Click PTZ under the live image. See Section 10.9.1 Displaying live video. Î The PTZ control appears. Fig. 3 PTZ control 1 Position number The current pan/tilt position is shown here. The position number can be set using the keypad (9) or with the + / - keys (2). 2 Select SIMATRIX input The + / - keys can be used to link the desired video input of the cross bar to the Web server. The maximum number of selectable inputs is 99 3 Two-digit position

  • Siemens CCIS1337-LP, Unit description 19 Siemens Building Technologies Fire Safety & Security Products 04.2006 2. Click the Start button. Î The Web-Cam IP Manager program window will now display a list of all the devices available for communication along with their IP and MAC addresses. Each device's IP address or MAC address is unique. 3. Select the device whose home page you want to access. 4. Click the Home page of selected server... button Î The home page of the selected device will appear. See Section 7.5 Components of the unit home page.

  • Siemens CCIS1337-LP, Configuration 51 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.10 Embedding live video images in a dedicated HTML page 10.10.1 Live video in Gecko-based browsers Prerequisite: You have installed a Gecko-based browser (Mozilla, Netscape 7.0+). This browser can be downloaded from: http://mozilla.org/, http://netscape.com/download/ The live video images delivered by the device can be embedded in dedicated HTML pages using an HTML tag such as: <IMG SRC="http://192.168.1.100/cgi-bin/livejpeg" BORDER=8> Example of an executable HTML page <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"&

  • Siemens CCIS1337-LP, Index 58 Siemens Building Technologies Fire Safety & Security Products 04.2006 Restarting the camera 46 S Saturation ~ configuration 33 Saving still pictures 50 Service 43 Service mode 54 Synchronization 39 T Text overlay ~ configuration 33 U Unit home page Components of the unit home page 20 User name ~ configuration 44 W Web-Cam IP Manager Troubleshooting 32 White balance 40

  • Siemens CCIS1337-LP, Maintenance 54 Siemens Building Technologies Fire Safety & Security Products 04.2006 11 Maintenance 11.1 Service mode The service mode allows the device IP address to be reset even if the IP address that is currently allocated to the device is not known. If, for example, the Automatic Network Configuration (DHCP) option is activated when communication with the device is first established, the device will automatically be allocated an IP address by the DHCP server after each restart. This address is

  • Siemens CCIS1337-LP, Operational setup 25 Siemens Building Technologies Fire Safety & Security Products 04.2006 9.1.2 Mapping a network route Mapping an appropriate network route informs the computer that it can reach IP address 192.168.100.100 in its own network segment and does not need to use a router. Network routes can be set using the operating system "route" command. The exact command syntax depends on the operating system used and may sometimes be affected by the computer's hardware configuration. The following example is valid for the Windows 2000 operating system: First of all, enter the client PC IP address from which the device is to be accesse

  • Siemens CCIS1337-LP, Configuration 36 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.5 Configuring camera settings 10.5.1 Configuring day/night settings 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. 2. In the Configuration menu, select the menu option Camera and the Day/Night Settings suboption. Î The Day/Night Settings dialog appears. Fig. 7 Day/night settings 3. Enter the desired settings in this dialog. D/N mode The day/night function offers the options “Auto”, “Color” and “Mono” (bla

  • Siemens CCIS1337-LP, Configuration 39 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.5.3 Setting the synchronization 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. 2. In the Configuration menu, select the menu option Camera and the Synchronization suboption. Î The Synchronization dialog will appear: Fig. 9 Synchronization settings 3. Enter the desired settings in this dialog. Operating mode The following options are available: Prerequisite: The LL mode is only available for camera models with AC power supply. z INT The IP camera is in the internal SYNC mode (quartz).

  • Configuration 32 Siemens Building Technologies Fire Safety & Security Products 04.2006 5. Either manually enter the desired IP address, subnet mask and gateway (if required), or mark the check box if you want the DHCP server to determine these parameters. Î The settings will be adopted immediately. This process takes about 40 seconds. Next, the device h

  • Siemens CCIS1337-LP, Package contents 14 Siemens Building Technologies Fire Safety & Security Products 04.2006 6 Package contents z Super-high resolution indoor 1/3" day/night IP camera CCIS1337-LP z C/CS mounting adapter z Quick installation guide z CD with operating manual z CD with software

  • Configuration 27 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.1.1 Example of access using a dynamic IP address Requirements: z Your device is part of a local network (LAN) and is connected to the Internet by a router, such as a TDSL router. z An ISP (Internet Service Provider) has already allocated you an IP address. z An ISP (Inter

  • Siemens CCIS1337-LP, Configuration 43 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.5.7 Service configuration 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. 2. In the Configuration menu, select the menu option Camera and the Service suboption. Î The Service dialog will appear: Fig. 13 Service 3. Enter the desired settings in this dialog. IMPORTANT Cover the lens before using the pixel error compensation (blemish) function. Failing to do so may cause errors with the IP camera. Blemish If the lens is covered a test can be made for defective pixels. Click the Detect button. The pres

  • Siemens CCIS1337-LP, Operational setup 24 Siemens Building Technologies Fire Safety & Security Products 04.2006 9 Operational setup 9.1 Establishing initial communication with the unit The factory settings for the IP address and subnet mask are 192.168.100.100 and 0.0.0.0 respectively. Communication between the device and the client PC is only possible if both the client PC and the device are located in the same network segment. There are two possible methods of achieving this: z Changing the IP address of the client PC. See Section 9.1.1 Changing the IP address of the client P

  • Siemens CCIS1337-LP, Maintenance 55 Siemens Building Technologies Fire Safety & Security Products 04.2006 Î The service mode is indicated by a periodic blinking of the LED at the network connection. As soon as the LED blinks at a rate of about once per second, the unit is in service mode for 60 seconds. 7. Reconnect the network cable to the device. 8. Click the OK button or press the Enter key to execute the prepared command line in the Command Prompt window. See point 3 in this regard. 9. Check the IP address using the ping command (e.g. ping 192.168.1

  • Siemens CCIS1337-LP, We reserve the right to make technical changes without notice. Supply is subject to availability. Data and design subject to change without notice. Supply subject to availability. © Copyright by Siemens Building Technologies AG We reserve all rights to this document and the subject thereof. By acceptance of the document, the recipient acknowledges these rights and undertakes not to publish the document nor the subject thereof in full or in part, nor to make is content available to any third party without our explicit prior written authorization, nor to use it for any purpose other than that for which it was provided. We reserve all rights in t

  • Siemens CCIS1337-LP, Assembly and setup 23 Siemens Building Technologies Fire Safety & Security Products 04.2006 – The factory setting for the focal lenth (back focus) is for a CS-mount lens (as delivered). 8.1.1 Setting the focal length 1. Loosen the back focus lock screw (2). 2. Set the IP camera to the back focus operating mode. See Section 10.5.7 Service configuration. Î The lens aperture opens completely. 3. Turn the back focus dial ( 1) until the image is in focus. 4. Tighten the screw ( 2) again carefully. 5. Connect the IP camera to the network using a network cable connected to the RJ-45

  • Siemens CCIS1337-LP, Assembly and setup 22 Siemens Building Technologies Fire Safety & Security Products 04.2006 8 Assembly and setup 8.1 Setting up the IP camera 1. Mount the lens on the IP camera. 2. Connect a monitor to the video output ( 9) using a BNC cable. WARNING Danger of burns from the housing of the IP camera The housing of the IP camera becomes hot during operation. z Do not touch the housing of the IP camera. CAUTION Danger of overheating for the IP camera During operation of the IP camera, there is a danger that the unit will overheat. This

  • Siemens CCIS1337-LP, Safety 9 Siemens Building Technologies Fire Safety & Security Products 04.2006 2.4 Meaning of the signal words The severity of a hazard is indicated by the following signal words. Ignoring these hazards may lead to the consequences indicated. Signal word Type of hazard WARNING Possible danger of death or severe bodily harm. CAUTION Danger of minor bodily injury or property damage IMPORTANT Danger of malfunctions 2.5 Meaning of the hazard symbols The nature of the hazard is indicated by icons. Dangerous situation Elec

  • Siemens CCIS1337-LP, Guidelines and standards 10 Siemens Building Technologies Fire Safety & Security Products 04.2006 3 Guidelines and standards 3.1 EU Directive The product meets the requirements of the EU Directive 89/336/EEC on electromagnetic compatibility The EU declaration of conformity is available from: Siemens Building Technologies Fire & Security Products GmbH & Co. oHG 76181 Karlsruhe, Germany EU Directive 89/336/EEC on electromagnetic compatibility Conformity with the EU Directive 89/336/EEC is demonstrated by compliance with the following standards: Emitted interference: EN 61

  • 5 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.5.5 Entering and positioning the ID text........................................................41 10.5.6 Configuring other settings .......................................................................42 10.5.7 Service configuration .......................................................

Related Products and Documents (IP Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sony SLV-778HF - Video Cassette Recorder Dimensions sony/slv-778hf-video-cassette-recorder-HD2.pdf 26 Jun 2023 1 0.04 Mb
2 Philips SE765 Operation & user’s manual philips/se765-2E1.pdf 02 Jul 2023 52 1.02 Mb
3 Fortinet FortiGate 800/800F Installation manual fortinet/fortigate-800-800f-3A1.pdf 07 Aug 2022 54 1.65 Mb
4 Philips HTS5500C/55 Quick use manual philips/hts5500c-55-W3D.pdf 04 Oct 2023 2 0.66 Mb
5 RBH Sound SX-10 Owner's manual rbh-sound/sx-10-P89.pdf 03 Jun 2023 28
6 Apex Digital 575 Owner's manual apex-digital/575-PX5.pdf 24 Apr 2023 2

Similar Resources:

  • Espow

    HD PET CAMERA

    (5 pages)
    HD PET CAMERA Before using this product, please be sure to read the manual and retain it. Properly use it on the basis of full understanding of the content. Below design and specifications subject to change without notice. I. Introduction This product is a "lightweight" MP3 music digital camera designed for your pet. Buil …
  • Samsung

    SCC-931T

    (2 pages)
    GVI SecurityDimensions (unit : in)Front/Rear PanelSAMSUNG | GVI Security • Toll Free: 888-595-2288 • Fax: 972-245-7333This product specifications and manual are also available in pdf format at www.gviss.comThe information is subject to change without notice • v2.6.09SCC-931T1/4” Anti-Vandal, Color, Motorized Zoom Lens Dome Camera3.79ø5.19ø3.7Weathe …
  • Bticino

    391762

    (32 pages)
    391762IP Speed Dome camera full HD Manuele di istruzioni - Manuel utilisateur - User manualLE09783AB-01GSJ-16W49it I manuali per gli utenti, i software e gli aggiornamenti sono a disposizione all’indirizo : http://www.legrandoc.com e nel sito www.bticino.it.fr Les manuels utilisateurs, les logiciels et mises à jour sont disponibles sur : ht …
  • ITS Telecom

    Meeting Owl Pro

    (2 pages)
    If using a room computer, Turn system off when finished. Tap OFF in the upper right corner of the screen, then tap Yes to confirm that you would like to turn off the system.If you are in a room with an installed instructor’s computer, the Meeting Owl Pro already is connected and ready for use. To begin, turn on the system and log in to the computer: QUICK …
  • Magus

    MCBIR280A

    (2 pages)
    Specification Model MCBIR280A Pick up Element Color 1/3" HDIS Effective Picture 976H)×496V) Elements (H×V) Horizontal Resolution Color 800TV & B/W 850TVL Minimum Illumination 01Lux-IR ON S/N Ratio More than 48dB Scanning System 2:1 interface Synchronous System Internal, Negative sync. Auto Electronic Shutter Auto Gama Characteristic …
  • FLIR

    Photon

    (77 pages)
    PhotonUser’s ManualFLIR Inc.70 Castilian DriveGoleta, CA 93117Phone: 888.747.FLIR (888.747.3547)International: +1.805.964.9797www.flir.comwww.corebyindigo.comDocument Number: 412-0035-00-10Version: 110Issue Date: February 2008TM …

Comments, Questions and Opinions: