AccuDome ACD-1500-LG27 Instruction Manual

Text of AccuDome ACD-1500-LG27 User Guide:

• 2 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7 1 Introduction Features 3 Components 4 System Configuration 5 2 RS485 and PTZ Basics Physical Connection 6 Multiple PTZ Setup 7 I

• AccuDome ACD-1500-LG27, 3 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  Camera Specification • Sony Module 480 Lines • 27X Optical Zoom • 10X Digital Zoom • 3.25mm – 88mm Zoom • 24v AC  Complete View • 360 Degree Pan, 90 Degree Tilt. For No Blind Spots  Housing • Indoor / Outdoor use, Weather Proof Housing • Multiple Mounting Configurations • Operating Temperatures: -31° to 131° F  PTZ Control • RS-485 Communication, MAX 31 Multi-drop • Versatile Pelco-D and Pelco P Protocol • Variable Pan and Tilt Speed • 64 Programmable Presets • OSD Setup • Programma

• AccuDome ACD-1500-LG27, 4 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  Parts Information Item Part No. Description Dome Camera and Housing ACD-1500-LG27 NTSC Dome Camera, Weather Proof Housing, Including Transparent Dome Wall Mount Bracket Bracket for mounting PTZ to Wall Pendant Mount Bracket Bracket for mounting PTZ to Ceiling Mounting Screws & Wrench Allen Screws for mounting PTZ to Mount Power Supply 24v AC Power Supply Manual Manual for ACD-1500-LG27  Default Components Dome Camera and Housing Wall

• AccuDome ACD-1500-LG27, 5 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  Configuration  Part Description • Mount Used to install Camera Housing • Housing Protects Internal Components From the Elements •Polycarbonate Dome Protects PTZ Camera • Wiring Access Allows access to internal wiring • Built in Heaters Keeps lens clear in cold weather System Configuration INTRODUCTION 1 INTRODUCTION 1 Introduction 1 Wiring Access Mount Housing Polycarbonate Dome (Camera inside) Video Output Blue

• 6 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  RS-485 communication RS-485 communication is used to control a PTZ camera. Standalone DVRs, PC-based DVRs, keyboard joystick PTZ controllers, video servers, and a variety of other CCTV equipment usually have an RS-485 interface (push terminals, D-Sub connector, etc.) for PTZ control. The CCTV equipment

• 7 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7 Baud Rate is the data transmission rate in bps (bits per second). Both the controlling device and PTZ must use the same baud rate. Most PTZ camera and devices default to a baud rate of 2400 bps. The maximum theoretical transmitting distances of RS-485 are below using 0.56mm (24AWG) twisted pair cable. Baud Rate Maxim

• AccuDome ACD-1500-LG27, 8 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7 Multiple PTZ (cont.) Some circumstances require the use of a star configuration. The termination resistors must be set on the two devices that are the farthest distances away from each other, in this case #1 and #15 as seen below. As the star configuration does not conform to the RS485 standards, problems such as signal reflection and lower anti-interference performance arise when the cable runs are long. In addition, the reliability of control signals are decreased which may cause the PTZ to respond intermittently, not respond at all, or operate a single comm

• AccuDome ACD-1500-LG27, 9 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  PTZ Addressing and Communication Protocol Before installing PTZs, you must understand 3 things: -PTZ Camera ID -PTZ Protocol -PTZ Baud Rate PTZ Camera ID - Each PTZ camera in an install must have a unique ID number assigned. Most PTZs default to ID#1. The PTZ controller must be told what PTZ camera to control, and this ID number is called to control the corresponding camera. The PTZ ID number can be

• AccuDome ACD-1500-LG27, 10 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  Wall Mount Installation using Outdoor Housing Assembly 1) Attach the Wall Mount Bracket to the wall. Make sure the wall can support the weight and vibration of the camera and housing. 2) Remove thumb screw holding access cover in place on Mounting Arm. 3) Route the wiring through the inside of the arm and out the access hole. 4) Assemble and screw the Outdoor Housing Assembly on the Mount Bracket while routing the wiring from the camera through the neck of the bracket and out the access hole. Continue to page 11 System I

• AccuDome ACD-1500-LG27, 11 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  Ceiling Mount Installation using Outdoor Housing Assembly 1) Mount the Top Ceiling Mount Bracket to the Ceiling. Make sure the Ceiling can support the weight and vibration of the camera and housing. 2) Route the wiring through the bottom Ceiling Mount Bracket and Extension. 3) Attach assembly to the PTZ camera using the included Allen Screws. Tighten set screws. 4) Align the PTZ Assembly into the top of the

• AccuDome ACD-1500-LG27, 12 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7 5) Unscrew Polycarbonate dome cover counter- clockwise. 6) Remove BLACK camera cover inside of housing. 7) Set DIP switches according to Protocol and Baud rate desired. (See page 13 for details) 8) Replace BLACK camera cover and Polycarbonate dome cover. 3 Installation

• AccuDome ACD-1500-LG27, 13 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  RS-485 communication RS-485 communication is used to control the camera. RS-485 utilizes two wires, + and -. Protocol, Baud rate and Camera Address are also required and are set using 2 sets of Dip Switch sets under the BLACK camera cover inside the PTZ housing (see page 12). Each camera connected to the PTZ controller must have a unique address. • Specification Standard RS-485 with MAX. 31 Camera Control • Number of wir

• AccuDome ACD-1500-LG27, 14 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  SW 1 : Camera Address Settings (continued) When using more than 1 RS-485 device each unit must be given a unique address. Refer to the chart on the previous page for the value of each dip switch. For each dip switch that is ON the value/values are added together, the total is the address of that unit. For Example: For an address of 1: Dip switch #1 (value = 1) will be ON all others OFF For an address of 5: Dip switch #1 (value = 1) & #3 (value = 4) will be ON all others OFF For an address of 157: Dip Switch #1 (value = 1), #3 (value = 4), #4 (va

• AccuDome ACD-1500-LG27, 15 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  SW 2 : Camera Protocol and Baud Rate Settings This camera supports multiple RS-485 Protocols and Baud Rates which can be set using the SW2 Dip switch located under the BLACK camera cover. The table below contains a list of protocols supported by the camera and the default baud rate for the protocol. Selection Of Protocols Default Baud Rates Supported Protocol 1 st 2 nd 3 rd 4 th 5 th 6 th Pelco D /2400 ON ON OFF OFF OFF OFF Pelco P /4800 OFF OFF ON OFF O

• AccuDome ACD-1500-LG27, 16 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7 Once initial control of the PTZ has been established by correctly connecting RS-485, setting matching protocol and baud rate in the PTZ and controller, and the user is able to pan, tilt, and zoom additional features can be utilized. All Basic Functions such as setting presets, calling presets, clearing presets, enabling auto cruise (tour), setting auto pan, enable auto pan are listed in this section. Any PTZ controlling device can enable these functions IF the controlling device supports at least 64 presets. Examples have been given below for operation using the KCT-100 and KCT-2500 keyboard joystick

• AccuDome ACD-1500-LG27, 17 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  Setting a Preset Position • KCT-100: [N] + [PRESET] Ex: To set preset 1, simply press 1, then PRESET • KCT-2500: [PRESET] + [N] + [ENTER] Ex: To set preset 1, simply press PRESET, then 1, then ENTER **There will be no notification of successfully setting the preset. Move the controller and call the newly set preset to ensure the preset was saved.  Calling a Preset Position • KCT-100: [N] + [CALL] Ex: To call preset 1, simply press 1, then CALL • KCT-25

• AccuDome ACD-1500-LG27, 18 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  Auto Cruise (Tour) • KCT-100: [51] + [PRESET] Ex: To enable auto cruise, simply press 51, then PRESET • KCT-2500: [PRESET] + [51] + [ENTER] Ex: To enable auto cruise, simply press PRESET, then 51, then ENTER ** Auto Cruise continuously scans from presets 1 – 16 in sequence. You must have presets 1-5 set before running the Auto Cruise.  Auto Pan • KCT-100: Set Start Point: [52] + [PRESET] Set End Point: [53] + [PRESET] Run Auto Pan Low Speed: [51] + [CALL] Run Auto Pan Med Speed: [52] + [CALL] Run Auto Pan Max Speed: [53] + [CALL] Ex: After setting the start point and

• 19 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7 All of the Advanced Functions of this camera are controlled by calling and setting specific presets to enable and disable the functions. This includes the OSD (On Screen Display) Setup on page 21. Your PTZ controller must be able to call and set presets 51 through 63 to be able to access the Advan

• AccuDome ACD-1500-LG27, 20 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  Iris Mode: The Iris Mode can be set using this function or in the OSD. Function Action on Controller IRIS MODE – AUTO Call preset 60 IRIS MODE - MANUAL Set preset 60  White Balance Mode: The White Balance Mode can be set using this function or in the OSD. Function Action on Controller WHITE BALANCE MODE - AUTO Call preset 61 WHITE BALANCE MODE – MANUAL Set preset 61 WHITE BALANCE MODE – INDOOR Call preset 62 WHITE BALAN

• AccuDome ACD-1500-LG27, 21 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7 al  On Screen Display (OSD): The LG Zoom camera installed supports an On Screen Menu for additional camera settings. To open the On Screen Display for the LG Zoom camera, CALL Preset 57 twice. Function Action on Controller OPEN OSD Menu Call preset 57 Twice MOVE CURSOR DOWN WIDE or Zoom In MOVE CURSOR UP TELE or Zoom Out MOVE CURSOR RIGHT NEAR or Focus Near MOVE CURSOR LEFT FAR or Focus Far ENTER / SELECT FAR Menu Option Description CAMERA ID FOCUS SET Opens the Focus Menu (see page ) AWB SET Opens the Auto White Balance Menu (see page ) AE SET O

• AccuDome ACD-1500-LG27, 22 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7 On Screen Display (continued)  Focus Set Menu:  Auto White Balance (AWB) Menu: Focus Menu Auto White Balance Menu 7 On Screen Display

• AccuDome ACD-1500-LG27, 23 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7 On Screen Display (continued)  Auto Exposure (AE) Menu:  Special Functions (SPECIAL) Menu: Auto Exposure Menu Special Functions Menu 7 On Screen Display

• AccuDome ACD-1500-LG27, 24 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7 On Screen Display (continued)  Motion Detection (MOTION DET) Menu:  Function On Screen Display (F OSD) Menu: Motion Detection Menu Function On Screen Display Menu 7 On Screen Display

• AccuDome ACD-1500-LG27, 25 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7  Wiring:  24v AC Terminal  BNC Connector for Video Out  RS-485 Communication Terminal • Screw Terminal Power connector: 24v AC wired directly to this plug. • Video out BNC connector Connect to units such as monitor, DVR, VCR and etc. • RS-485 Communication Screw Terminal Connector Signal A + Input B - Input PART DESCRIPTION AND FUNCTION 8 Parts Descri p tion and Function 24v AC RS-485 Input Orange A (

• AccuDome ACD-1500-LG27, 26 P an, Tilt and Zoom Dome Camera / ACD-1500-LG2 7 Model ACD-1500-LG27 Video Format NTSC Device 1/4'' Color CCD Total Pixel 410K pixels 811(H) × 508(V) H. Resolution More then 480 TV Lines Min. Illuminance 1.0 Lux Focus Auto/Manual Camera Iris Auto/Manual Zoom 27x Optical Zoom, 10x Digital Zoom, Total 270x Zoom Aperture F1.6 Lens Focal Length f=3.9 ~ 85.8mm Angle Pan 360° (Endless) / Tilt : 0~90° Pan Speed Variable 0.2° to 15°/sec (Zoom Proportio

Related Products and Documents (Security Camera):

Comparable Devices:

Similar Resources:

• Panasonic VL-CM851BX (40 pages) VL-CM851BXVL-DM200BX VL-MDM200BXOperating InstructionsModel No. VL-SDM200BXIncluding: VL-DM200BXVL-MDM200BXVL-CM851BXWireless Door CameraThank you for purchasing a Panasonic product.Please read this manual before using the unit and save for future reference.Installation Guide is supplied separately. …

• Dahua ITC237-PU1B-IR (64 pages) 2.0MP CMOS HD Camera Web Operation Manual Version 1.0.1 …

• COP-USA CS35F (1 pages) file:///C|/cop-usa/spec/CS35F.htm CS35F - Long Distance Spherical Color CameraImage Sensor: 1/4" SONY CCD Picture elements : EIA/NTSC: 512 H x 492 V - CCIR/PAL: 512 H x 582 V Horizontal resolution:420 TVL Minimun Illumination:1 LuxHorizontal Sync. frequency:EIA//NTSC: 15.734 KHZ - CCIR/PAL: 15.625 KHZVertical frequency : EIA//NTSC: 60 HZ - CCIR/PAL: 50 …

• Toshiba IK-UM44H (1 pages) INFORMATIONThis equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference when the equipment is operated in a commercial environment. This equip-ment generates, uses, and can radiate radio frequency ene …

• D-Link DWL-A650 (8 pages) Package Contents: • D-Link AirPro DWL-A650 Wireless Cardbus Adapter • Printed Quick Installation Guide • CD with Manual and Drivers NOTE: If any of the contents are missing, please contact the reseller. System Requirements • A laptop computer with an available 32-bit Cardbus PC Card slot • At least a 300 MHz processor and 32 MB of memory � …

• Abus TVHD75500 (205 pages) Außen HD-SDI 20x PTZ Dome IR 1080p D Bedienungsanleitung  User manual F Manuel utilisateur  Gebruikershandleiding  Brugerhåndbog  Instrukcja obsługi  Инструкция по эксплуатации Version 10/2014 Originalbedienungsanleitung in deutscher Sprache. Für künfti …

Comments, Questions and Opinions: