Adamson Systems Engineering Point Series Operation & User’s Manual

Text of Adamson Systems Engineering Point Series User Guide:

• Adamson Systems Engineering Point Series, Point Series User Manual Page 35 of 40 adamsonsystems.com Point Series Rigging Fasteners (Shipped with Rigging) FASTENER TYPE & QUANTITY (PER UNIT) PART NAME BUTTON HEAD BUTTON HEAD SHOULDER BOLT WASHER SAE WASHER SAE FLANGE NUT WASHER (NYLON) SCREW - THREAD SIZE 5/16"-18 X 1/2" 5/16"- 18 X 7/8" 3/8" X 1.75" 3/8" 5/16" 5/16"- 18 5/16" SLR™ Point 8 Horizontal Bracket - 2 - - - - 2 SLR™ Point 8 Vertical Bracket - 2 - - - - 2 S

• Adamson Systems Engineering Point Series, Dimensions & Weight Height Front (cm) 28.5/8” (72.6) Width (cm) 17.3/4” (45.1) Depth (cm) 13.1/8” (33.4) Weight (Kg) 54.5 lbs (24.8) Weight (Kg) with Crossover 58.5 lbs (26.6) Box Shape Anisometric Hexagon Box Finish Textured Water Borne Acrylic Hardware Finish Polyester Sandtex™ Powder Protective grille 18 Gauge Steel & foam Horn Configuration Fiberglass Waveguide Cabinet Construction Rugged 11 ply 5/8” Baltic Birch Options 1,114 Pantone colours Frequency Response (+/-3dB) Full Range Preset 55Hz - 18kHz Frequency Range with Xover Preset 90Hz - 18kHz Maximum SPL (Xover Preset: High Pass @80Hz) (Cont

• Adamson Systems Engineering Point Series, Point Series User Manual Page 30 of 40 adamsonsystems.com SLR™ Quick-Lock™ Articulator The Quick-Lock™ Articulator is used between two brackets in a vertical array. The Quick-Lock™ Articulator then allows a downward tilt of varying degrees on the bottom bracket. The Quick- Lock™ Articulator can be used between any combination of Horizontal or Butterfly Brackets- for example: A Point 8 Horizontal Bracket can be underhung beneath a Point 15 Butterfly Bracket. The angle is set by inserting a push pin into one of 8 holes each representing a different vertical angle. (Part # 920097) 3.7 Parts and Terminology

• It is compulsory to read this manual before using the Point Series system. Supervision and competency are the responsibility of the system owners and operators. All welded intersections, joints and rigging hardware must be inspected regularly. Operators must not assume rigging has been inspected prior to use. Before assembling and suspending any Adamson Point

• Adamson Systems Engineering Point Series, Point Series User Manual Page 4 of 40 adamsonsystems.com This manual is designed to give the Point Series user the necessary information to accurately, and safely, install the Point Series range of loudspeakers in all their available configurations. We will cover each box in the Point Series range and take a look at the technology involved that makes the Point Series range one of the best sounding installation speakers ranges available today. Step by step rigging procedures will be included for all av

• Point Series User Manual Page 29 of 40 adamsonsystems.com SLR™ Quick-Lock™ Butterfly Bracket The Quick-Lock Butterfly Bracket is used to attach 2 x Point Series cabinets in a horizontal array. The Quick-Lock™ Butterfly Bracket is designed to fly vertically but can be tilted in the vertical plane. Both cabinets can then be rotated independently of eac

• Adamson Systems Engineering Point Series, Point Series User Manual Page 15 of 40 adamsonsystems.com 1.5 Part Numbers Point Series & Side Lock Revolver™ Rigging Accessories PRODUCT PART NUMBER Point 8-A 900091 Active, ND8 LF & 1” exit HF Point 8-P 900092 Passive, ND8 LF & 1” exit HF Point 12-A 900093 Active, ND12 LF & 1.4” exit HF Point 12-P 900094 Passive, ND12 LF & 1.4” exit HF Point 15-A 9000095 Active, ND15 LF & 1.4” exit HF Point 15-P 900096 Passive, ND15 LF & 1.4” exit HF Point 115 Sub-A 900099 Active, Single 15 sub Point 115 Sub-P 900098 Passive, Single 15 sub -

• Adamson Systems Engineering Point Series, Point Series User Manual Page 5 of 40 adamsonsystems.com The Point Series™ loudspeaker range has been designed with the installation market in mind. Our goal was to bring the innovative loudspeaker technology utilized in the world renowned Adamson touring products, to the installation industry. The Point Series has been designed from the ground up to provide a complete solution where point source loudspeakers are preferable over line source arrays. When building a point source loudspeaker system, one must pay special attention to not only fidelity, but box output, rigging versatility and pattern control. The Point Ser

• Adamson Systems Engineering Point Series, Point Series User Manual Page 25 of 40 adamsonsystems.com 3.2 Parts and Terminology SLR™ Wedger The SLR™ Wedger is a stand / handle combo* for supporting a Point 2-way enclosure as an elevated stage monitor with 2 fixed angles: 40˚ & 55˚. The SLR™ Wedger screws into the built- in Omnimount threads. The necessary 5/16- 18“ thread flathead screws are built-in. There are 3 Wedger sizes, one for each a Point -8, Point -12 and Point-15. (Part # 8 - 920125, 12 - 920126, 15 - 920127) * The Point 8 SLR™ Wedger is a stand only. Pictured Point 8 SLR™ Wedger is unpainted, but displays the accurate hole sizes for use with built-in flat head screws.

• Adamson Systems Engineering Point Series, Point Series User Manual Page 32 of 40 adamsonsystems.com SLR™ Pole Mount Base for Quick-Lock™ Brackets The Pole Mount Base for Quick-Lock™ Brackets can be fitted to any of the Point Series Horizontal or Vertical Brackets (except the Point 8 Vertical) for use with any standard speaker stand or pole. The Pole Mount Base for Quick-Lock™ Brackets can be utilized with the Pole Mount Base for Point Subs to offer a 3- way Polemounted system. (Part # 920108) 3.9 Parts and Terminology SLR™ Polemount Base for Subs The bottom SLR™ Socket on the Point Series cabinets doubles as a Polemount Socket with

• Adamson Systems Engineering Point Series, The Side Lock Revolver (SLR™) rigging system promotes flexibility in setup even in the most Dali-esque venues with difficult coverage areas. All cabinets use discreet SLR™sockets placed on 4 sides of the enclosure, available for use with practically all Point series rigging methods offered. The Point 115 Subs can be arrayed using the SLR™ Sight Mount™, Quick-Lock™ 360° Articulator™, or one below the other with SLR™ Underhang system, in settings such as dance clubs where space might be an issue

• Adamson Systems Engineering Point Series, Point Series User Manual Page 39 of 40 adamsonsystems.com Processing, Amplification & Cabling Processing All processing is taken care of by the Point Control Digital Signal Processor. Point Series Cabinets available in both Passive or Active versions. Amplification Adamson recommends the use of Lab.gruppen amplifiers for the entire Point Series range. There are many different power handling options in the C:Series Installation range in both 4 and 8 channel models. and the FP touring series is also recommended for its a

• Adamson Systems Engineering Point Series, Point Series User Manual Page 34 of 40 adamsonsystems.com SLR™ Point 115 Sub to Point 8 Underhang Adapters The Point 115 Sub to Point 8 Adapter consists of two Mirror-imaged arms that allow a Point 8 cabinet to be hung horizontally (on it’s side) underneath a Point 115 Sub. The Point 8 can then be tilted in the vertical plane to achieve the desired coverage angle. NOTE: If both the Point 115 Sub and Point 8 are used in Passive Mode-they both can be powered using 1x amplifier channel. See Wiring Diagrams (p.22) for details. The Point 115 Sub to Point 8 Adapters attaches via the SLR™ Sockets on both the Poin

• Point Series User Manual Page 37 of 40 adamsonsystems.com 3.13 Rigging in Pictures Point Series 8 Cabinet under a Point 115 Sub or a Point 15 You’ll Need: 1 set (left and right) x SLR™ Underhang Kit 1 x SLR™ Regular or Extended Sight Mount

• Adamson Systems Engineering Point Series, Point Series User Manual Page 23 of 40 adamsonsystems.com 3.0 Parts and Terminology SLR™ Socket The SLR™ (Side Lock Revolver) Socket is the main attachment point* for all of the brackets in the Point Series SLR™ (Side Lock Revolver) rigging system. Each box** in the Point Series has SLR™ Sockets on both sides and top and bottom. (Built-in no part #) The SLR™ Socket allows horizontal and vertical rigging brackets to be snapped into place, and then adjusted to get desired angle. This means the user does not have to lift the box while trying to adjust the aiming angle. The screw threads are used for locking the

• Adamson Systems Engineering Point Series, Point Series User Manual Page 8 of 40 adamsonsystems.com The Point 115 Sub The Point 115 is the smaller of the two original subs in the Point Series range. It features a frequency range (+/-3dB) of 50Hz- 200Hz (full range) or 50Hz-135Hz (with xover preset). The Point 115 Sub can be used to complement the entire 2-way Point Series range. The Point 115 Sub features 1x 15” ND-15S 6Ω Neodymium / Kevlar Bass Driver with a peak power handling of 2000W. It comes complete with SLR™ rigging sockets and is

• Point Series User Manual Page 14 of 40 adamsonsystems.com 1.4 Rigging Options & Adapters POINT 8 POINT 12 POINT 15 POINT 115 SUB POINT 215 SUB Built-in Rigging: 2 Sets of SLR™ Sockets x x x x n/a Built-in Polemount Socket x x x n/a n/a 4 x 5/16 -18 threads (for Omni Mount 40/60 Series - Adamson does not supply) 40 Series 60 Series 60 Series 60 Series n/a 5/16 -18 threads for

• Adamson Systems Engineering Point Series, Point Series User Manual Page 31 of 40 adamsonsystems.com SLR™ Sight Mount The standard Sight Mount attaches directly to any Point Series cabinet via the screw threads mounted in the SLR Socket adapter. Each different hole on the SIght Mount offers a different vertical aiming angle. (Part # 920095) 3.8 Parts and Terminology SLR™ Extended Sight Mount The Extended Sight Mount offers a wider variety of available vertical aiming angles than the standard Sight Mount (Part # 920094) SLR™ Super Sight Mount The Super Sight Mount is designed to be used with Quick-Lock™ Horizontal, V

• Adamson Systems Engineering Point Series, Point Series User Manual Page 38 of 40 adamsonsystems.com 3.13 Rigging in Pictures 2 Point Series cabinets hung vertically one under another You’ll Need: 2 x SLR™ Horizontal Bracket 1 x SLR™ Articulator 1 x SLR™ Super Sight Mount

• Point Series User Manual Page 26 of 40 adamsonsystems.com SLR™ Quick-Lock™ Pin Pulling the Quick-Lock™ Pin allows one arm of the SLR™ Horizontal, Vertical and Butterfly Brackets to extend- allowing them to be lined up with the SLR™ Sockets. Once they’re lined up, the arm can be snapped into the socket. Once the arm is in place the Quick-Lock™

• Adamson Systems Engineering Point Series, Point Series User Manual Page 33 of 40 adamsonsystems.com SLR™ Quick-Lock™ 360° Articulator The Quick-Lock™ 360˚ Articulator allows any Point Series cabinet to be mount to a standard C-Clamp and then rotated a full 360˚ in the horizontal plane. It uses a push pin to lock in the desired horizontal angle to ensure no movement over time. The 360˚ Base Plate is mounted directly to the SLR™ Socket, and the cabinet can then be rotated and snapped into place using the push pin. (Part # 920123) SLR™ Fixed Base C-Clamp Adapter The Fixed Base C-Clamp Adapter is

• Adamson Systems Engineering Point Series, The Side Lock Revolver (SLR™) rigging system promotes flexibility in setup even in the most Dali-esque venues with difficult coverage areas. The series enclosures have been designed to fully integrate with one another. The Point 8’s height matches the Point 115 Sub’s width for easy, underhang applications. All cabinets use discreet SLR™sockets placed on 4 sides of the enclosure, availble for use with all Point series rigging methods offered. Many of the SLR™ rigging parts feature a ‘Quick-lock™’ mechanism for a one-step installation and/ or angle a

Related Products and Documents (Speakers):

Comparable Devices:

Similar Resources:

• Philips AD7000W (2 pages) Option 2: Set up using WPSOption 2: Configuration par WPSOpción 2: Configuración a través de WPSOption 1: Set up using iPod Touch / iPhone / iPadOption 1: Configuration à l'aide de l'iPod Touch/iPhone/iPadOpción 1: Configuración a través de iPod touch/iPhone/iPadWait up to 30 seconds until “Philips Fidelio AirPlay” is detected. Then, tap …

• Philips 350 (2 pages) DEFINEYOURSELF The precise wayto define facial hair and design your own styleCREATE ANYSHAPE, ANY LINEUltimate control for precisesmooth lines and edges withunlimited styling possibilitiesGuaranteed Precision and DefinitionRechargeableCordless15 mm: 9/16 in.Hi-definition trimmer17mm: 1 1/16 in.Mini-foilFull 2-Year Warranty60-Day Money-back GuaranteeDUAL DEF …

• Hama BTL-200 (24 pages) w ww.hama.com H ama GmbH & Co KGPostfach 80 86651 Monheim/GermanyTel. +49 (0)9091/502-0 Fax +49 (0)9091/[email protected] declaración de conformidad según la directiva R&TTE 99/5/CE la encontrará en www.hama.comLa dichiarazione di conformità secondo la direttiva R&TTE 99/5/CE è disponibile sul sito www.hama.c …

• EQD EQ012 (1 pages) 4540 Campus Drive, Suite 150 Newport Beach, CA 92660 | www.eqdcorp.com26MODEL EQ012ROOMSPEAKERSPECIFICATIONSAmplifier: Output Power: 10 Watt RMS Power Distribution: 5 Watt x 2 Harmonic distortion: <1% 1W 1 KHzFrequency Response: 90Hz - 20HzSignal / Noise Ratio: > 70dBSeparation: > 60dB Speakers:Full range driver type: 2.75”Full range rated powe …

• Wharfedale Pro EVP-S10 (2 pages) UnpackingAll Wharfedale Pro products are fullychecked before leaving the factory. Afterunpacking please inspect cabinets for anyphysical damage. Please retain the shippingcarton if possible and internal packing material in case the unit needsto be returned. Please check as soon as possible the unit isfunctioning. In the event of any damage please contact you …

• Fluance DB10 (16 pages) High Performance SubwooferDB10Instruction ManualThank you for your purchase of this Fluance product. Please read this manual carefully before using the product to ensure proper use. Keep this manual in a safe place for future reference.fluance.com …

Comments, Questions and Opinions: