Manualios.com

i-Flash P2DS Series Operation & User’s Manual

i-Flash P2DS Series Manual Online:

4.6, 821 votes
i-Flash P2DS Series User Manual
i-Flash P2DS Series User Guide
i-Flash P2DS Series Online Manual

Text of i-Flash P2DS Series User Guide:

  • i-Flash P2DS Series, 2 | P a g e Pulse P2DS Series User Manual Safety Instruction These instructions are intended to assist users with the operation of the P2DS and also to instruct on how to avoid dangerous situations or damage to the device. Warnings: Serious injury or death may be caused if any of the warnings below are neglected. Cautions: Injury or damage to the equipment may occur if any of the following caution messages are neglected. Warnings Follow these safeguards to prevent serious injury or death. Cautions Follow these precautions to prevent potential injury or material damage. Warnings: Input voltage sh

  • i-Flash P2DS Series, 13 | P a g e Pulse P2DS Series User Manual 8 CONTRAST Adjusts the image contrast 9 View Size Resize the image to fit into the window panel in the home scream 10 Configuration Camera Configuration Setting 11 Language Select language – English or Chinese 12 Play / Stop Plays/Stops the video. 13 Capture Captures the image displayed and saves it to C:\GS_Capture (default directory). 14 Record Records the video and saves it to C:\GS_Record (default directory). 15 Sound Off/On Toggles the sound On or Off 16 Talk Establishes two-way audio 17 Playback Replays the saved video 18 Config Configures the Sav

  • i-Flash P2DS Series, 6 | P a g e Pulse P2DS Series User Manual Package Contents Items in the package: • P2DS IP Camera • Quick Installation Guide and Software CD P2DS IP Camera Quick Installation Guide and Software CD

  • i-Flash P2DS Series, 18 | P a g e Pulse P2DS Series User Manual shorter, the video quality is higher but uses more bandwidth. NOTE: The users might need to configure the Primary Stream and Secondary Stream properly. Sometimes, the user might like to watch the live video stream from the web GUI in low resolution mode while recording a copy via “Surveillance System” software in high resolution due to the limitation of internet bandwidth. In this case, for example, primary stream can be configured to have better resolution, and then the users can use primary stream to record while watching secon

  • 24 | P a g e Pulse P2DS Series User Manual Configure Phone List Page To make sure the P2DS can make phone calls to the number you preferred when alarm is triggered. You need to add number to the phone list. Steps to add phone number: 1. From the P2DS home page, click Basic Settings > SIP. 2. Go to Phone List Tab. 3. Enter the Phone number

  • 11 | P a g e Pulse P2DS Series User Manual Connect to the Camera using Static IP If the camera does not get response from DHCP server after 3 minutes, it can be accessed by the default IP 192.168.1.168. 1. Connect your PC to the same network as the P2DS. 2. Configure the IP address of your PC to: 192.168.1.XXX (1<XXX<255) and configure the subnet mas

  • i-Flash P2DS Series, 8 | P a g e Pulse P2DS Series User Manual P2DS Key Features Video Compression H.264 HP、JPEG, Motion JPEG Image Sensor 1/3.2”, 2-Megapixel CMOS, 1,600Hx1,200V Lens 1/3", M12 MEGA, f=3.6 mm, F=1.8 (Selectable) Day/Night IR Light and IR-CUT control (Optional) Min. illumination 0.5Lux Min. illumination Response 1.0V/lux-sec (550nm) Max Video Resolution 1600x1200 Max Frame Rate 6 fps 1600x 1200, 25fps at 1280x720, 30fps at 800x460, 640x360, 480x270, 320x180 and 240x135 Pixel Dynamic Range 71dB, with ( SNRMAX = 42.3dB) Video Outpu

  • i-Flash P2DS Series, 4 | P a g e Pulse P2DS Series User Manual Contents Welcome ………………………………………………………………………………………………………………… 5 Package Contents ………………………………………………………………………………………………… 6 Product Overview ………………………………………………………………………………………………… 7 Configuring the P2DS via Web Browse

  • i-Flash P2DS Series, 22 | P a g e Pulse P2DS Series User Manual SIP Page The P2DS has the ability to receive phone calls and make phone calls when an alarm event is triggered through motion detection or alarm input. Register the P2DS to a SIP server to enable the product to make and receive phone calls. To make outgoing phone calls out, the user needs to configure the Phone List properly.

  • i-Flash P2DS Series, 17 | P a g e Pulse P2DS Series User Manual Video Settings Preferred Video Codec – The P2DS supports the H.264 video codec. Resolution – The higher the resolution is, the better the video quality is, and higher bandwidth is required. Bit Rate – The number of bits that are conveyed or processed per unit of time. Maximum Frame Rate – The video frame rate is adjustable based on network conditions. Increasing the frame rate will increase the amount of data significantly therefore consuming more bandwidth. Video will be impaired due to packet loss when there is insufficient bandwidth. Bit Rate Contr

  • i-Flash P2DS Series, 33 | P a g e Pulse P2DS Series User Manual P2DS System Log This page is used to set up the system log server path and system log level. Once they are correctly configured, the device will send out system log messages to the system log server, which will help perform troubleshooting. Syslog Server – The IP address or URL of System log server. Syslog Level – Select the device to report the log level. Default is None. The level is one of Debug, Info, Warning or Error.

  • i-Flash P2DS Series, 28 | P a g e Pulse P2DS Series User Manual Performing a firmware upgrade: 1. Download the firmware package from www.i-flashtech.com 2. Unzip the firmware package and copy the files to the firmware upgrade server directory. Upgrades are supported via TFTP, HTTP and HTTPS. 3. Log in to the Maintenance page of the P2DS. Select the server type from the dropdown list under the “Upgrade Via” field. Enter your server’s root directory in the “Firmware Server Path” field. 4. Reboot the P2DS to begin the firmwar

  • i-Flash P2DS Series, 5 | P a g e Pulse P2DS Series User Manual Welcome The P2DS is a next generation mini IP dome camera for remote monitoring and surveillance over your LAN or internet. The P2DS combines best in class IP video technology and SIP protocols for a robust IP surveillance solution. The product features H.264 video streams with up to 30 frames per second in full D1, delivering rich image clarity at rapid transmission rates. Integrated SIP can pass alarms to the PSTN, mobile phones, SIP IP phones, SIP videophones and enables 2-way VoIP communication. T

  • i-Flash P2DS Series, 30 | P a g e Pulse P2DS Series User Manual Path – The directory in the FTP server where recorded video will be uploaded. Test FTP Account Settings – Click the Test button to upload a sample file to make sure that FTP is properly configured. PTZ Settings This setting is not supported in P2DS Alarm HTTP Server Settings Server Name: input the Server Name URL: input the Server IP Address User Name & Password: input User Name & Password

  • i-Flash P2DS Series, 3 | P a g e Pulse P2DS Series User Manual Notice: • Make sure that the power supply voltage is correct before using the camera. • Do not drop the device or expose it to physical shock. • Do not expose the device to temperatures outside the range of -10 °C to +50°C when the device is in operation. • Do not expose the device to damp/wet conditions or high electromagnetism radiation. • To avoid heat accumulation, make sure that your operating environment has

  • i-Flash P2DS Series, 23 | P a g e Pulse P2DS Series User Manual Register P2DS to a SIP Server 1. From the P2DS home page, click Basic Settings > SIP. 2. Go to SIP Settings Tab. 3. General Phone Settings. Registered – The field shows the registration status of the account with the SIP server. Unregister On Reboot – If it’s checked, the SIP user’s registration information will be cleared from the server when the phone reboots. 4. Enter the required information. Account Name – The field configures the SIP account name. SIP Server – The SIP Server’s IP address or Domain name provided by your service provider. Outbound Proxy – The IP address or Domain name o

  • i-Flash P2DS Series, 9 | P a g e Pulse P2DS Series User Manual Installation Guide Minimum Recommended System Requirement • Windows 2000 Server Professional, Windows XP, Windows Vista, Windows 7 • CPU: Intel Pentium 4 or higher, 2 GHz. • RAM: 1 GB (4 GB recommended for larger systems). • Support for DirectX 8.0 and above. Connect your P2DS Using the Power adapter as power supply • Connect an RJ-45 cable to the NETWORK port of the P2DS. • Connect the other end of the RJ-45 cable to your network or PC. • Connect the power supply to

  • 21 | P a g e Pulse P2DS Series User Manual Set up DDNS 1. Apply for a domain name from your service provider. 2. Login to the web configuration page, click Basic Settings > DDNS. 3. Enter the required information • DDNS Active – If you want to use DDNS, please set this field to “Enabled” . • DDNS ISP Type – Select your DDNS ISP Type.

Related Products and Documents (IP Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 FujiFilm Finepix 2800 Specifications fujifilm/finepix-2800-8U3.pdf 17 Dec 2023 3 0.41 Mb
2 Bryant HUMBBLBP2018-A Homeowner's manual bryant/humbblbp2018-a-4DA.pdf 28 Jun 2022 8 0.15 Mb
3 Mercedes-Benz 2005 C 230 Kompressor Operator's manual mercedes-benz/2005-c-230-kompressor-L92.pdf 22 Sep 2022 474
4 Sony MDR-PQ1 - Budstyle Headphone Manual de instrucciones sony/mdr-pq1-budstyle-headphone-3BS.pdf 02 Feb 2024 2 0.51 Mb
5 AGA GC3 (P/F) Installation instructions manual aga/gc3-pf-FG4.pdf 31 Jan 2023 12 0.17 Mb
6 LEXIBOOK RPB100 Instruction manual lexibook/rpb100-W71.pdf 30 Nov 2022 13

Similar Resources:

  • HIKVISION

    DS-2TD2637B-10/P

    (4 pages)
    User ManualCode: DS-2TD2637B-10/PIP HYBRID THERMAL IMAGING CAMERA DS-2TD2637B-10/P 9.7 mm - 720p, 4 mm - 4 MpxHikvisionDELTA-OPTI Monika Matysiak; https://www.delta.poznan.plPOL; 60-713 Poznań; Graniczna 10e-mail: [email protected]; tel: +(48) 61 864 69 602021-02-14 DS-2TD2637B-10/P 1/4Warning! Please read the user manual included in this work as …
  • Moxa Technologies

    VPort 26A-1MP Series

    (23 pages)
     2013 Moxa Inc. All rights reserved. P/N: 1802000261010 Moxa IP Camera VPort 26A-1MP Series Quick Installation Guide First Edition, March 2013 …
  • Ismartgate Cam

    iSG-CAM-02W

    (2 pages)
    142.5mm.00.0095.00mm190.00mm285.00mm380.00mmV1.0What's in the boxQuick Installation Guide Resource CDEthernet CablePower Adapter IP Camera Meet the iSmartgate Cam (outdoor model)Wi-Fi Antenna1. Turn on your iSmartgate IP Camera using the provided power supply. (do NOT use the Ethernet - RJ45 cable).2. Connect your Smartphone to the same Wi-Fi network w …
  • SMAX Technology

    SIU7117

    (8 pages)
    3M IP Camera Bullet Quick Installation Guide Thank you for purchasing this product! Before you use this product, please check the package contents. If any item is missing, contact your dealer of purchase to claim for missing item(s). Package Contents No. Description Q’ty 1 Network IP Camera 1 2 DC power adapter 1 3 Sun Shield 1 4 Screw …
  • Panasonic

    KX-HNC805C

    (76 pages)
    Installation GuideHome Network SystemHD CameraModel No. KX-HNC805CThank you for purchasing a Panasonic product.This document explains how to configure the camera and access itusing a mobile device. These steps must be followed before you canuse the camera. For details about how to use the camera, refer to theUser’s Guide (page 30).Please read this docum …
  • Vitek

    Transcendent Series

    (16 pages)
    VITEKVITEK VT-TPTZ20HR-2PNSTranscendent Series 2 MegaPixel 1/2.8” 20x PoE+ IP Speed Dome CameraQUICK START GUIDEFEATURES • 1/2.8” 2MP Sony STARVIS® CMOS Progressive Scan Sensor • Superior Image Quality via High MTF 20x Zoom Lens and STARVIS® to Capture Vivid Color Images in Low Light Conditions • Max 30fps @ 2MP • True WDR (Wide Dynamic Ra …

Comments, Questions and Opinions: