Manualios.com

Fetch TV fetch tv Quick Start Manual

Fetch TV fetch tv Manual Online:

3.05, 2744 votes
Fetch TV fetch tv User Manual
Fetch TV fetch tv User Guide
Fetch TV fetch tv Online Manual

Text of Fetch TV fetch tv User Guide:

  • Fetch TV fetch tv, 14 1. Make sure both Power Line Adapters are turned on at the wall socket. 2. Data light will turn on when the adapters are connected to each other, and turn green when data is transmitting between the adapters. 3. Ethernet light will ash when data is successfully transmitting. 1. Turn on the Power at the wall socket. The power light on the Fetch TV Box will light up. Turn on Power Line Adapters (if used) Turn on Fetch TV Box 1. Standby light is blue when the Fetch TV Box is powered on. If it is red, the box is in standby mode and you should press the standby button on the remote control to turn it on. 2. Internet light on Fetch TV Box is blue when you

  • Fetch TV fetch tv, 21 Advanced troubleshooting If you have completed the basic troubleshooting steps above, and the more specic ones available via www.fetchtv.com.au/account, and your Fetch TV service is still having operational issues you will need to perform a reset. • You should try a ‘soft reset’ rst. It will reinstall the user interface and clear system les, but won’t touch your recordings. • If a soft reset doesn’t x the issue with your box, you can try a ‘hard reset’. This is a more thorough reset, but be aware it clears your series tags, messages and any recordings and downloads on your box. • After a reset, you’ll need to re-enter

  • Fetch TV fetch tv, 13 Power up your Fetch TV Box Once you’ve completed all the steps and put the batteries in your remote control it’s time to turn everything on. 6 Connect your Fetch TV Box to Power 1. Plug your power cable into the power supply unit. 2. Plug the other end of the power supply unit into the Fetch TV Box. 3. Plug the other end of the power cable into the wall power socket. Select Source / Input on TV 1. Turn on your TV. 2. On your TV remote control press either Source/Input or AV Select. 3. Select the HDMI port you

  • Fetch TV fetch tv, 20 Here are some basic things to check before you look for help. Power cycle • Reboot the Fetch TV Box by turning it off at the wall power point, waiting 10 seconds, and turning it on again. Like many electronic devices, this will solve most issues you have with the service. Cabling and TV • Make sure the power cord and power supply unit are correctly connected (Page 13), and there is power available at the wall power point. • Check that the AV connections are secure and, if necessary, try another connection mode (Page 13). • Make sure the TV is set to the right AV input sou

  • 2 It’s here – TV made better. Welcome to Fetch TV – an exciting new television experience that puts you in control of the best TV, great movies and popular interactive applications. There are 7 easy steps to get you started: 1. Sign up for your Fetch TV service 2. Unpack the box 3. Connect the Fetch TV Box to your broadband modem 4. Connect the Fetch TV

  • Fetch TV fetch tv, 1919 Troubleshooting If you’re having trouble getting Fetch TV to work, log into Account from the Fetch TV website - fetchtv.com.au/account Here you will nd comprehensive technical support articles, guides and billing FAQ’s. For step-by-step troubleshooting for common problems go to the Technical Help section. Just choose a category, like ‘Setup and Activation’ or ‘Recording TV’, and follow the on screen prompts.

  • Fetch TV fetch tv, 3 1 Sign up for Fetch TV service Now that you have your Fetch TV box you need to subscribe to Fetch TV and get the activation code for your box. To do this follow these simple steps: 1. On your computer or mobile device web browser, go to fetchtv.com.au/activate and follow the on screen prompts to get started. 2. You’ll need to set up a username and password, enter your account info, and payment details. 3. Once your payment details are conrmed you’ll get an activation code on screen, by email and SMS to your mobile phone. Your Fetch TV Box will prompt you to enter the activation code during start up later (Page 15). Manage your Fetch

  • Fetch TV fetch tv, 11 Connect your Fetch TV Box to your TV There are various ways to connect the Fetch TV STB to your TV or home theatre system. The one you choose will depend on the display capability of your TV and the connection ports available. HDMI is the recommended connection option if available. 5 Digital High Definition – HDMI (Recommended Option) This connection delivers the highest quality picture and audio letting you watch High Denition programming. Only the HDMI cable is needed. 1. Plug the HDMI cable into the port labelled HDMI on the back of the Fetch TV Box. 2. Plu

  • Fetch TV fetch tv, 23 23 23 Specications Other Dimensions Max Weight Max Power Consumption Operating Temperature Range Storage Temperature Range Humidity Hard Drive Capacity Tuners Video Decode Audio Decode Surround Sound Support Interactive Applications support 260x252x50mm 1.52kg 20W +5 to + 45 deg C -20 to +70 deg C 10 to 90% NC 1TB 3 x DVB-T MPEG4 HD / H.264/AVC MPEG4 AAC, MPEG 4 HE-AAC v2 Dolby Digital Surround 5.1 (AC3) and Dolby Digital Plus (Enhanced AC3) Adobe Flashlite for Digital Home Output Connector Specication Signal Composite Video RCA Phono 1Vp/p 75 Ohms PAL – Standard Denition Analogue Audio 2 x RCA Phono 1V rms 600 Ohms Left a

  • Fetch TV fetch tv, 8 Use this option if your installation location has internal data cabling. Option 3 Connect Modem to Fetch TV Box using data cabling To connect, follow these steps: 1. Plug one end of the Ethernet Cable into a free port on your broadband modem. 2. Plug the other end into the Ethernet wall socket nearest to your broadband modem. 3. Plug one end of a second Ethernet Cable into the port labelled INTERNET on the back of your Fetch TV Box. 4. Plug the other end into the Ethernet wall socket nearest your TV and Fetch TV Box. • You will nd th

  • Fetch TV fetch tv, 22 Getting more help If you have questions about payment of your Fetch TV service, changing your subscription or how to update your Credit Card details, go to www.fetchtv.com.au/account and select Billing Queries from the menu. Select or search for an FAQ to assist you. 1.31 Have a question about billing? Log into your account at fetchtv.com.au/account at any time to check for service outages. You’ll also be notied here of any billing issues affecting your service or account and what you need to do to res

  • Fetch TV fetch tv, 17 Fetch TV Mobile App Control your Fetch TV Box with your tablet or mobile phone at home or when you’re out and about, using the Fetch TV Mobile app. To start go to the App Store or Google Play and install the Fetch TV app on your phone or tablet. Schedule recordings Watch selected content Doubles as a remote control Once you’ve installed the app on your phone or tablet you need to pair it with your Fetch TV Box by following these steps: Pair the app with your Fetch TV Box 1. Turn on your Fetch TV Box. 2. Press on your remote control to bring up the main menu. 3. Go to Manage > Settings > Mobile & Tablet and press 4. Select Connect and press .

  • Fetch TV fetch tv, 26 © Fetch TV Pty Limited. ABN 36 130 669 500. All rights reserved. Fetch TV Pty Limited is the owner of the trade marks Fetch TV. The set top box and the Fetch TV service may only be used lawfully and in accordance with relevant terms of use of which you are notied by your Fetch TV service provider. You may only use the recording functionality of the set top box for the purpose of viewing programs at your address at a more convenient time. You must not use any recording or the electronic program guide, or any part of it, for any purpose other than private and domestic purposes and you must not sub-licence, sell, lease, lend, upload, download, communicate

  • Fetch TV fetch tv, 6 Connect your Fetch TV Box to your broadband Modem Fetch TV is delivered by broadband internet, so you need to connect your Fetch TV Box to the broadband modem. There are various ways to do this: • Ethernet Cable (recommended option) – direct or via data cabling • Power Line Adapters (alternative option if your broadband modem and box are too far apart for the Ethernet cable to reach) 3 Option 1 Connect Modem direct to Fetch TV Box via Ethernet cable Use this option if your TV and Fetch TV Box are close enough to your broadband modem to connect them using an Ethernet cable. To connect, follow these steps: 1. Plug one end of

  • Fetch TV fetch tv, 9 Connect your Fetch TV Box to TV Antenna You get your free-to-air Digital TV channels using your normal TV antenna. They are not delivered over broadband internet. You’ll need your existing TV antenna cable as well as the one that came with your Fetch TV Box. Unplug the existing antenna cable from your TV but leave it connected to the wall antenna socket. 4 Connect TV Antenna to Fetch TV Box 1. Plug one end of the existing antenna cable into the antenna wall socket, or leave if already connected to the wall. 2. Plug the other end of the antenna cable into the socket labelled Antenna-IN on the back of your Fetch TV Box. 3. Plug one end of the s

  • Fetch TV fetch tv, 1 What’s inside Step 1 Signing up for your Fetch TV service 3 Step 2 Unpack the box 4 Step 3 Connect Fetch TV Box to your broadband modem 6 Step 4 Connect Fetch TV Box to your TV Antenna 9 Step 5 Connect Fetch TV Box to your TV 11 Step 6 Power up Fetch TV Box 13 Step 7 Start up Fetch TV 15 Remote Control 16 Fetch TV Mobile app 17 Fetch TV Box 18 Troubleshooting 19 Getting More Help 22 Specifications 23

  • Fetch TV fetch tv, 24 Product Code M605T This product complies with the following Standards: Electrical Safety AS/NZS 60065.1-2008 RF Emissions AS/NZS CISPR 13 and 22 C-Tick Supplier Code N25670 Compliance Contact Fetch TV Level 5, 61 Lavender Street Milsons Point NSW 2061 ABN: 36 130 669 500 www.fetchtv.com.au

  • Fetch TV fetch tv, 15 Start up your Fetch TV This is the home stretch where you activate your Fetch TV Box and get it all happening. When you’ve turned the power on, it will take a few minutes for the box to move through three loading screens and the screen may go black between each one. Don’t worry, this is normal. Once finished simply follow the instructions on the Welcome Screen. 7 Welcome Screen • When prompted, enter the Activation Code that you got on Sign Up (Page 3). Use the remote control to enter the code (which

  • Fetch TV fetch tv, 5 Installation Tips • Place the Fetch TV Box horizontally on a clean, dry, steady surface with 5cm of space all around it. Don’t stack it on audiovisual appliances that generate heat or electromagnetic radiation. • Keep the Fetch TV Box away from direct sunlight, carpet, heating and cooking sources. Don’t put it in closed cabinets or on vibrating surfaces like loudspeakers. • Make sure the Fetch TV Box is close to the TV and/or home theatre it’s being connected to, and within 6 metres from where the remote control is used. • Only use a cle

  • Fetch TV fetch tv, 7 Use this option if your modem and Fetch TV Box are in different rooms in your home. The Power Line Adapters, which came with your Fetch TV Box, will transmit the service using the power cables inside your walls. Option 2 Connect Modem to Fetch TV Box with Power Line Adapters To connect, follow these steps: 1. Plug one Power Line Adapter into an electrical wall socket near your broadband modem. 2. Plug one end of an Ethernet cable into the port on the Power Line Adapter. 3. Plug the other end into a free port on your broadband modem. 4. Plug the other Power Line Adapter into an electrical wall socket near your TV and Fet

  • 4 2 Unpacking the box Before you install your Fetch TV Box, check that all the accessories you need have been supplied using this page as a checklist. You will need: 1 Fetch TV Box Unit 1 Power Supply Unit 1 Power Cord (1.5m) 1 Antenna Cable (1.5m) 1 HDMI Cable (1.8m) 1 RJ45 Ethernet Cable (2m) 1 Remote Control 2 AA Batteries 1 RYW Composite Cable (1.5m) For connecti

  • Fetch TV fetch tv, 10 Want to connect a VCR/DVD Player? 1. Plug one end of the existing antenna cable into the antenna wall socket, or leave if already connected to the wall. 2. Plug the other end of the antenna cable into the socket labelled Antenna-IN on the back of your Fetch TV Box. 3. Plug one end of the second antenna cable into the socket labelled Antenna-OUT on the back of your Fetch TV Box. 4. Plug the other end into the antenna socket on the back of your TV. Your Fetch TV Box has an optical digital audio output and HDMI port. Either of these may be used to connect to your home theatre so y

Related Products and Documents (TV Tuner):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Rosewill RNX-N300 Quick installation manual rosewill/rnx-n300-1Y3.pdf 07 Feb 2023 4
2 Nilfisk-ALTO DELTABOOSTER Operating instructions manual nilfisk-alto/deltabooster-G8O.pdf 23 Dec 2022 56
3 Eminent EM4577 Operation & user’s manual eminent/em4577-IIJ.pdf 16 Jul 2022 8
4 Rinnai RHFE-551FA Service manual rinnai/rhfe-551fa-46I.pdf 25 Nov 2023 68 3.78 Mb
5 Sena PRISM Operation & user’s manual sena/prism-DD3.pdf 30 Dec 2022 58
6 Oki B710n Duplexer install oki/b710n-JP1.pdf 27 Aug 2023 1

Similar Resources:

  • Erisan

    AnyCast EZM2

    (7 pages)
    1Quick Instruction for ERISAN AnyCastAny questions, please email: [email protected] EZM2 has two modes for Wi-Fi connection, one is the Miracast for Android, the other is theDLNA for iOS(like iPhone, iPad or Macbook)Please press the "Fn" button to enter in the correct mode. …
  • ADS Technologies

    PTV-338-EF

    (1 pages)
    Instant Digital TV USB Hardware Installation GuideNorth American OfficeADS Tech Inc, USA12627 Hidden Creek WayCerritos, CA 90703, USAWebSite: www.adstech.comEmail: [email protected]: +1.562.926.4338Southern Europe | MEA Office ADS Tech SARL France51/55 Rue Hoche94200 - Ivry Sur Seine, FranceWebSite: www.adstech.frEmail: [email protected]
  • Panasonic

    CY-TUP153N

    (18 pages)
    TV TunerCY-TUP153NOperating InstructionsBedienungsanleitungManuel d’instructionsManuale di istruzioniManual de Instrucciones Please read these instructions carefully before using this product and keep this manual for future reference. Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie …
  • Crux

    BTS-VW2

    (2 pages)
    + +RINTERFACING SOLUTIONSCrux Interfacing Solutions • Chatsworth, CA 91311phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.comrev.082020BTS-VW2Bluetooth Audio Streaming, USB Player andAuxiliary Audio Input for Select Audi and Volkswagen Vehicles1 of 2- Adds Bluetooth Music streaming to the OEM Audi and Volkswagen radio.- USB music pla …
  • Hauppauge

    WinTV-HVR-950Q

    (2 pages)
    Page 4 Page 5 Page 6Page 1 Page 2 Page 3WinTV-HVR-950Quick Installation Guide for Windows XPand Windows Vista (all versions)© Hauppauge Computer Works, Inc. 2006-2007 · QI-WINTV-HVR-950-V1.3A-ENG · 4/27/2007● WinTV-HVR-950 HybridNTSC/ATSC stick● USB extension cable● Portable TV antenna● WinTV-HVR-950Installation CD-ROMincluding the WinTV applicati …
  • Polycom

    SoundStation VTX 1000TM Package

    (2 pages)
    Package 4 - Ceiling Microphones, Ceiling “Can” Style LoudspeakersQuick Installation GuideVortex®EF2241 - SoundStation VTX 1000TMPackageInstalled Voice System with Wideband Telephone Connection, Ceiling Microphones and Ceiling LoudspeakersConnect. Any Way You Want.Loudspeaker InstallationLoudspeakers should be installed and connected before powering up t …

Comments, Questions and Opinions: