Manualios.com

IDENTIVISION IIP IIP-L3100F Installation Manual

IDENTIVISION IIP IIP-L3100F Manual Online:

3.25, 2877 votes
IDENTIVISION IIP IIP-L3100F User Manual
IDENTIVISION IIP IIP-L3100F User Guide
IDENTIVISION IIP IIP-L3100F Online Manual

Text of IDENTIVISION IIP IIP-L3100F User Guide:

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 4 IDENTIVISION Megapixel camera installation guide 11.2 Choosing total capacity............................................................................................................................69 12. Onvif.............................................................................................................................................................69 13. Specifications................................................................................................................

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 63 IDENTIVISION Megapixel camera installation guide 8. MOBILPHONE\TABLET ACCESS WITH VMEYE APP The Vmeye app can be used to watch the surveillance system, control the PTZ cameras. Available mobilphone’s systems: Android, Blackberry, Iphone, Symbian, Windows mobile. Step 1. Install the right app for the mobilphone\tablet from the App store. Step 2. Click on the Settings option. 85. picture Using the Vmeye app Step 3. Click on the ’Plus’ button to add a device and write the network settings to the fields. 86. picture VMEye settings (exampl

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 8 IDENTIVISION Megapixel camera installation guide  DC12/5V Power supply: 12/5V DC, the incorrect voltage will damage or make the device unusable  Indication light: red: working, green: starting ending, blinking green: local recording, blinking red: alarm activation  Alarm input: default – normal open  Alarm output:  Reset: Press and hold for 5 second to reset the system to default settings include IP settings.  Audio input: conntec

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 9 IDENTIVISION Megapixel camera installation guide 4. Basic operations 4.1 Starts Connect the power supply to the camera, after this the IP camera will start automatically. Note: Make sure that the input voltage corresponds with the switch of the IP Camera power supply. Power supply demands: 220V ± 10% / 50Hz. We recommend to use an UPS to protect the power supply. 4.2 Reboot To reboot the camera there are two methods:  Software (in menu): Choose in the menu the reboot o

  • Product specifications, parameters, functions of the device can change without notice! 16 IDENTIVISION Megapixel camera installation guide 4.11 Alarm settings  Video motion  Video blind  Video loss  Alarm input  Alarm output  Abnormal 11. picture Alarm function

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 38 IDENTIVISION Megapixel camera installation guide 42. picture HDD manage 4.16.1 Account Manage the user authority of this device. Note: 1. The character length is 8 bytes at most for the following user and user team name. The blank ahead or behind the character string is invalid. The middle blank in the character string is valid. Legal characters include: letter, number, underline, subtraction sign, and dot. 2. There is no limit in the user and user group. You can add

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 57 IDENTIVISION Megapixel camera installation guide 5.4 Recorder settings The next step is to set the right settings to the router. Step 1. Log-in to the recorder, click on the Channel mode. Step 2. Choose the right option for your system. (There are just only fix modes) Step 3. Click on the left side to activate the mode. Step 4. Click on the OK button. Step 5. The device will ask for reboot, click on the OK button. Step 6. After this, there are 2 more options in the Digital opt

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 30 IDENTIVISION Megapixel camera installation guide DDNS type: set the right option Enable: set to activate Server IP: IP address of DDNS server Port: port address User name: write the user name Password: write the password Refresh time: set the refresh time Note: To use this option, first please set the DDNS settings [Alarm server] When alarm is activated, the alarm server receives information from the device. 32. picture Alarm server options Protocoll type: set the right option, default: General Enable: set to activate Server

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 65 IDENTIVISION Megapixel camera installation guide 89. picture Finish Note: There could be error messages with using the app, because the servers for this feature are in China, but there are just temporary. This feature has 4-5 seconds delay!

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 61 IDENTIVISION Megapixel camera installation guide 82. picture Remote access 7.2 Remote access (without wizard) Step 1. Write to the browser the http://www.xmeye.net/ address. Step 2. Click on the By Device option and write the factory number of the device (which will be accessed)(it can be found in the Settings-Info-Version. Step 3. Click on the Login. Step 4. After the succces settings, the device will be shown on the left side. 7.3 Remote access (with more devices) With these steps i

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 66 IDENTIVISION Megapixel camera installation guide 10. FAQ&MAINTENANCE 10.1 Important Safeguards and Warnings  Do not place heavy objects on the IPC.  Do not let any solid or liquid fall into or infiltrate the IPC.  Please brush printed circuit boards, connectors, fans, machine box and so on regularly. Before the dust cleaning please switch off the power supply and unplug it.  Do not disassemble or repair the IPC by yourself. Do not replace the components by yourself. Environment:  Please place and use IP camera

  • Product specifications, parameters, functions of the device can change without notice! 69 IDENTIVISION Megapixel camera installation guide 11. SD CARD 11.1 SD card capacity To make sure normally realize the function, suggest to use TF card minimum 4G, and Maximum 32G, for stability, we suggest to Kinston 16G TF card。 11.2 Choosing total capacity

  • Product specifications, parameters, functions of the device can change without notice! 6 IDENTIVISION Megapixel camera installation guide Ethernet port for remote acces, updating and maintenance 2. Product unpacking and cable connection 2.1 Checking the contents of package  When you receive the product, please first check the model number that is the same what

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 56 IDENTIVISION Megapixel camera installation guide 73. picture D-link router Belkin Virtual Server 74. picture Belkin router

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 26 IDENTIVISION Megapixel camera installation guide 4.15.1 Net service Double click which would you like to set. 24. picture Net service 25. picture PPPOE [PPPoE settings] Click on the activate and write the user name and the password, which provided by the ISP (Internet Service Provider). Reboot after set and the record will make a PPPoE connection with ISP. The IP address will change to dynamic. [NTP setup]

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 29 IDENTIVISION Megapixel camera installation guide User name: write the user name Password: write the password When DDNS is activated and ready, you can access with this address from the Internet Explorer. [FTP settings] 30. picture FTP settings Enable: set to activate Server IP: server IP address Port: FTP server port number User name: write the user name Password: write the password File size: Set the max upload file size to. default: 128MB Order name: upload order name FTP upload is only possible when alarm is activated. When the alarm time is over, the uploading is automatic. [ARSP] 31.

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 21 IDENTIVISION Megapixel camera installation guide 4.11.4 Alarm input Alarm input settings. 18. picture Alarm input 4.11.5 Alarm output Alarm output settings. 19. picture Alarm output

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 45 IDENTIVISION Megapixel camera installation guide 5. DIGITAL CHANNELS 5.1 Basic knowledge [IP address] two functions: host or network interface identification (IP address example: 192.168.1.110) Two versions of IP are in use: IP Version 4 and IP Version 6. Each version defines an IP address differently. Because of its prevalence, the generic term IP address typically still refers to the addresses defined by IPv4. [TCP port]

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 22 IDENTIVISION Megapixel camera installation guide 4.11.6 Abnormal There are abnormal events which can trigger an alarm.  Storage device not exist  Low storage capacity  Storage access problem  IP address problem  Network problem 20. picture Abnormal settings [Activation] function activation [Message] message on the main screen [Buzzer] 4.12 System settings  General options  Encoding  Network  Net service  Gui option  PTZ configuration  RS485, RS232 options  Ca

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 68 IDENTIVISION Megapixel camera installation guide 13. Question Client side cannot log-in when the IP address was revised, tips with: log-in overtime and cannot find device. a. no IP conflict or MAC conflict b. close client side, log-in again after 10s. 14. Question WIFI function of IP camera is not working a. Wi-Fi module and device correctly connected. b. target router support WIFI and it is enable c. the password of router that device input is correct. d. the WIFI

  • Product specifications, parameters, functions of the device can change without notice! 53 IDENTIVISION Megapixel camera installation guide 5.3.4 Port forwarding Please use this feature, if your router does not have a UPNP option, otherwise these steps are unnecessary. 65. picture Router UpnP settings 66. picture Enable the UPNP feature on the device too! Port forwarding steps. Step 1. Log-

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 64 IDENTIVISION Megapixel camera installation guide [Max channel] channel number of the device Step 4. Click on the OK button and the device can be access with the mobilphone. 87. picture Recorder access 9. CLOUD ACCESS WITH VMEYECLOUD APP The devices can be used to remote access without any DynDNS provider with the VMeyecloud app. Available mobilphone’s systems: Android, Blackberry, Iphone, Symbian, Windows mobile. In Step 1. Install the right app for the mobilphone\table

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 48 IDENTIVISION Megapixel camera installation guide Step 6. On he new screen click on the IP Search option. After the searching time, it will show the available devices. 57. picture IP Search Step 7. Choose the device, which will be used (double click, and the fields will be automatically filled) 58. picture Camera network settings Note: If there are no devices after the search, probably there is a network problem. Please make sure that the network settings are good, or the devices have installed correctly. (It can cause problems a broken UTP cable, make sure to test e

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 33 IDENTIVISION Megapixel camera installation guide 4.15.3 GUI display 37. picture GUI display [Channel Name] Click the channel name modify button and enter the channel name menu. Modify the channel name. [Time title] the system time on monitoring pag [Channel title] channel No at monitoring page [Record status] record status on monitoring page [Alarm status] alarm status on monitoring page [Transparency] choose the transparency of b

  • Product specifications, parameters, functions of the device can change without notice! 35 IDENTIVISION Megapixel camera installation guide 4.15.4 RS232 39. picture RS232 [Serial Port Function] Common serial port is used to debug and update program or set up specific serial port. [Baud rate] Choose the corresponding baud rate length [Data bits] Include 5-8 options. [S

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 2 IDENTIVISION Megapixel camera installation guide CONTENT 1. General introduction..........................................................................................................................................5 1.1 Product effiency.........................................................................................................................................5 1.2 Main functions.........................................................................................................................................

  • Product specifications, parameters, functions of the device can change without notice! 72 IDENTIVISION Megapixel camera installation guide SNOWBALL series UFO series SHARK series SPEED DÓM series outdoor outdoor outdoor outdoor outdoor Glass 2.8mm (80°) / 4mm (68°) 2.8-12mm (80°-24°) 2.8-12mm (80°-24°) 2.8-12mm (80°-24°) 18x zoom IR LED range 16m 35m 35m 20m 100

  • IDENTIVISION IIP IIP-L3100F, Product specifications, parameters, functions of the device can change without notice! 51 IDENTIVISION Megapixel camera installation guide 5.3.3 Static IP address with CMS Step 1. Click on the Settings menu and choose the remote settings. 62. picture Remote settings Step 2. Choose on the left side to which camera will be modified. Click on the Settings and the Network option. 63. picture Network options Step 3. In this window can be modified the network settings to the device.

Related Products and Documents (IP Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Dometic 706 Owner's manual dometic/706-W3S.pdf 28 Nov 2022 16 0.62 Mb
2 Bissell Lift-Off 3750 SERIES Operation & user’s manual bissell/lift-off-3750-series-6JC.pdf 21 Jun 2023 16 1.3 Mb
3 Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command reference manual brocade-communications-systems/a7533a-brocade-4gb-san-switch-base-H87.pdf 02 Feb 2023 746 5.93 Mb
4 Continental Electric CE21061 Instruction manual continental-electric/ce21061-73P.pdf 31 Oct 2022 20 0.7 Mb
5 CyberData 930095K Operation manual cyberdata/930095k-Y62.pdf 28 Nov 2023 42 1.44 Mb
6 Life Fitness V2 Brochure life-fitness/v2-ID1.pdf 03 Jul 2022 68

Similar Resources:

  • Optilia

    W10x-HD

    (4 pages)
    Optilia Instruments AB www.optilia.eu Rev D, January-2011 Installation instructions for W10x-HD camera 1. Assemble the Boom Stand according to the bellow picture. 2. Put the stand on a flat and stable working bench and mount the W10x-HD camera onto the horizontal Boom. 3. Adjust height of the Boom for 245mm Working distance measured from …
  • Bluecctv

    BHR20-V801

    (2 pages)
    9. Power cable or video cable should be always loose.Do not keep the cables tight or twisted.10. Do not leave the unit along with an unstable stand or table.11. Please use thecamera unitwithin given temperature andelectricity limit.12. Please make sure thatinstallationshould be doneby qualified serviceperson only.13.Do notdisassemble the unit by yourself. Wh …
  • D-Link

    DCS-2132L

    (80 pages)
    HD Wireless N Cube Network CameraDCS-2132LThe DCS-2132L HD Wireless N Cube Network Camera is a mydlink-enabled IP surveillance camera that lets you monitor an area 24 hours a day. It helps you keep an eye on your home or oce, even when you’re away.24/7 HD Surveillance for Your Home or OceThe DCS-2132L is built with a megapixel image sensor …
  • Huviron

    SK-HT21AI

    (2 pages)
    FULL HD-TVI(1080P) IR WATER PROOF CAMERASK-P461(D)/HT21AIMANUALIf the product is to be put out of operation definitively,take it to a local recycling plant for a disposal whichis not harmful to the environment.1. Please study the instruction manual before your applications and keep it for your future reference.2. Do not flash LED light directly on the eyes …
  • Blow

    H-342

    (11 pages)
    USER MANUAL 1 Kamera IP | H-342 ; 78-790# | | H-343 ; 78-791# | | H-351 ; 78-704# | | H-352 ; 78-705# | | H-353 ; 78-707# | | H-355 ; 78-780# | …
  • ACTi

    CAM-6200

    (25 pages)
    IP Speed Dome Quick Installation Guide Ver. 061031 Model: CAM-6200/6220 …

Comments, Questions and Opinions: