Manualios.com

Canon ColorPass-Z7400 Configuration Manual

Canon ColorPass-Z7400 Manual Online:

4.85, 2532 votes
Canon ColorPass-Z7400 User Manual
Canon ColorPass-Z7400 User Guide
Canon ColorPass-Z7400 Online Manual

Text of Canon ColorPass-Z7400 User Guide:

  • Canon ColorPass-Z7400, 4 4-18 Performing Setup from the Control Panel 7. When you have finished entering protocol settings, choose Exit Protocol Setup, and then choose Service Setup. 8. Enter the appropriate settings for the services you will use. The options are described in detail in the following pages. TO EXIT NETWORK SETUP 1. When you have finished entering service settings, choose Exit Network Setup. 2. Choose Yes when prompted to save changes. 3. From the main Setup menu, choose another Setup or choose Exit Setup. Port Setup options Network Setup Port Setup To configure the ColorPASS, choose the port type you use and enter the

  • Canon ColorPass-Z7400, Part Number: 45038318 Copyright © 2003 Electronics for Imaging, Inc. and Canon Inc. All rights reserved. This publication is protected by copyright, and all rights are reserved. No part of it may be reproduced or transmitted in any form or by any means for any purpose without express prior written consent from Electronics for Imaging, Inc., except as expressly permitted herein. Information in this document is subject to change without notice and does not represent a commitment on the part of Electronics for Imaging, Inc. The software described in this publication is furnished

  • Canon ColorPass-Z7400, I-9 Index reprinting jobs 3-2 Restart Fiery command, from FieryBar 7-15 restoring fonts 4-51 Resume Print command, from FieryBar 7-15 Resume Printing command Control Panel 4-9 RGB Separation option 4-48, 5-43 RGB Source option 4-46, 5-43 RIP Status screen 4-6 RJ-45 connector 1-13 root login 2-18 Run Diagnostics command from Control Panel 4-9 Run Diagnostics command, from FieryBar 7-15 Run Setup command, from Control Panel 4-9 S safety 4-4 Save Changes Color Setup, Control Panel 4-48 Job Log Setup, Control Panel 4-50 Network Setup, Control Panel 4-18, 4-41 Printer Setup, Control Panel 4-42, 4-45 Setup, Control Pan

  • Canon ColorPass-Z7400, 4 4-36 Performing Setup from the Control Panel Web Services Setup Set Domain Name Select from list/Enter manually [Select from list] This option provides two ways to specify the workgroup or domain in which you want the ColorPASS to appear. If you selected Select from list:If you selected Enter manually: Choose Domain List of domains Select the workgroup or domain from the list. Workgroup or Domain Enter the name of the workgroup or domain. For more information about entering text and characters, see “Types

  • Canon ColorPass-Z7400, 5 5-43 Printer Setup options RGB Source Profile—Specify the RGB source space to be applied to RGB data. Rendering Style—Specify the Rendering Style to be applied to RGB data. CMYK Simulation Profile—Specify the simulation to be applied to CMYK data. CMYK Simulation Method—Specify the simulation method to be used. RGB Separation—This option defines how the ColorPASS processes RGB jobs. Select Output for RGB jobs that you print to the final output device. Select Simulation to simulate an output device that is not the device to which you are printing. Output Profile—Specify the output profile to be used as a default profile for printing. A

  • 1 1-6 Connecting to the Network Mac OS environment with AppleTalk Another supported protocol Key to setup: 1Mac OS computer User Software Installation Guide 2 ColorPASS Setup Chapter 4 Mac OS computer AppleTalk 1 1 1 AppleTalk protocol Mac OS computers can print directly. Mac OS computer Mac OS computer 2 ColorPASS connected to copier TCP/IP (http) for Fiery W

  • Canon ColorPass-Z7400, 2 2-3 ColorPASS on a TCP/IP network with Windows NT 4.0/2000/XP/Server 2003 Configuring a Windows NT 4.0/2000/Server 2003 server to communicate with the ColorPASS To configure a Windows NT 4.0/2000/Server 2003 server to communicate with the ColorPASS, follow these general steps. More detail is provided in subsequent sections in this chapter and in your Microsoft documentation. • Load the TCP/IP network protocol on the server and configure it with an IP address, subnet mask, and gateway. •Enter the host name of the ColorPASS in the host database used by your s

  • 3 3-12 Preparing for ColorPASS Setup TO SCAN THE COLORPASS FROM A WINDOWS COMPUTER 1. Disable all the print connections published in Server Setup and Printer Setup. In Server Setup, set Enable Printed Queue to No. In Printer Setup, set the following: •Publish Direct Connection to No •Enable Print Queue to No •Enable Hold Queue to No 2. Click Start in the Windows taskbar,

  • Canon ColorPass-Z7400, 5 5-29 Network Setup TO REMOVE BINDERY CONNECTIONS FROM REMOTE COLORPASS SETUP 1. Select Enable PServer mode from the Service1 tab. 2. Click Bindery Setup. The Novell Setup dialog box appears. 3. Make your selection in the Selected Servers list. 4. With the file server selected in the Selected Servers list, click Remove. 5. Click OK.

  • Canon ColorPass-Z7400, 2 2-14 Setting up Network Servers •Setting up the ColorPASS as a PostScript printer by installing a PostScript printer driver and the ColorPASS PPD (PostScript printer description). •Adding a network port and connecting the workstation to one or more NetWare queues that have been defined for the ColorPASS. •Installing ColorPASS software, such as color reference files. For details, see the User Software Installation Guide. ColorPASS on a NetWare network with NDPS The ColorPASS supports printing over a NetWare 5.x or later network running either the TCP/IP protocols or the IPX protocol. For pure IP printing, the ColorPASS takes advantage of features in NDPS (Novell Di

  • Canon ColorPass-Z7400, I-2 Index C Calibration command, from the Control Panel 4-9 Cancel Job from the Control Panel during printing 4-6 from the Control Panel during RIPping 4-6 Cancel Print command, from FieryBar 7-15 canceling Setup changes 4-14 changing Administrator password 7-4 Bindery connection 4-32 host name or DNS name A-7 Novell print server, Bindery 4-29, 4-32 password 7-2 characters used on Control Panel 4-15, 5-5 Choose File Server for editing Bindery connection 4-32 Chooser AppleTalk 4-14, 5-4 choosing a Bindery Server to connect 4-30, 5-24, 5-27 Clear Each Scan Job option 4-16, 5-5 Clear Frame Types, IPX/SPX Setup 4-24

  • Canon ColorPass-Z7400, A A-2 Troubleshooting Frame Type selection (Network Setup>Protocol Setup>IPX/SPX Setup) Enable NDS (Network Setup>Service Setup >PServer Setup >NDS Setup) Invalid frame size. The network hub is not connected to a Novell server when the ColorPASS tries to bind. Warning! IPX network number is zero. No other IPX machine can be found on the network, or the network hub is not connected to the network when the ColorPASS tries to bind. When this occurs, the network number defaults to zero. No NDS trees found. No NDS trees were found on the Novell network. Check to see that t

  • Canon ColorPass-Z7400, 5 5-13 Network Setup To set the subnet mask, enter one of the following values: • 255.0.0.0 if the IP address starts with a number less than 128 • 255.255.0.0 if the IP address starts with a number from 128 through 191 • 255.255.255.0 if the IP address starts with a number greater than 191 NOTE: Confirm the subnet mask setting with your network administrator before proceeding. In some cases, the required setting may be different from those listed. If your TCP/IP network has a gateway and users outside the gateway plan to print to the ColorPASS using TCP/IP, enter the ga

  • Canon ColorPass-Z7400, 5 5-27 Network Setup TO ADD BINDERY CONNECTIONS FROM REMOTE COLORPASS SETUP 1. Select Enable PServer mode from the Service1 tab. 2. Click Bindery Setup. 3. Select a file server from the Available Servers list. If the File Server User Name and Password dialog box appears, enter the appropriate user name and password to log on to the selected file server.

  • Canon ColorPass-Z7400, 7 7-11 Managing Fiery Address Books TO RESTORE AN ADDRESS BOOK TO THE COLORPASS 1. Start your e-mail client software application. 2. Open a new message window. 3. Enter the e-mail address of your print server in the To line. 4. Enter the command of a specified address book in the Subject line. For the User, enter “#GetAddressTo User”. For the Administrator, enter “#GetAddressTo Admin” or “#GetAddressTo Print”. 5. Copy the addresses retrieved and save it in the body of the e-mail. You can include nicknames. However, when a nickname and address goes beyond one line, edit it so that it fits onto one line. 6. Send the messag

  • 4 4-28 Performing Setup from the Control Panel Server should look for print queues in: Entire NDS Tree/Specified Subtree [Entire NDS Tree] By default, the ColorPASS searches the entire NDS tree for ColorPASS print connections. This option lets you restrict the search for ColorPASS print jobs to a subtree (the Print Queue root) in which the ColorPASS print

  • Canon ColorPass-Z7400, 1 1-11 Connecting network cable to the ColorPASS Connecting network cable to the ColorPASS In this section, the front view and back panel of the ColorPASS are illustrated, followed by information for connecting to the Ethernet board. Turn off the ColorPASS before connecting it to any network device. If the ColorPASS has just finished processing, wait five seconds after the system reaches the Idle state before using the power button on the front of the ColorPASS to turn it off. For the proper shutdown procedure, see “Starting and shutting down the ColorPASS

  • Canon ColorPass-Z7400, Contents About the Documentation Introduction About this manual xii Chapter 1: Connecting to the Network ColorPASS on the network 1-1 Stages of installation on the network 1-2 Quick path to installation 1-5 Connecting network cable to the ColorPASS 1-11 Back view of the ColorPASS 1-12 Ethernet connection 1-13 Chapter 2: Setting up Network Servers ColorPASS on a TCP/IP network with Windows NT 4.0/2000/XP/Server 2003 2-1 Tips for experts—Windows with TCP/IP 2-2 Configuring a Windows NT 4.0/2000/Server 20

  • Canon ColorPass-Z7400, 3 3-6 Preparing for ColorPASS Setup Control level scenarios Typical scenarios of access and control, ranging from minimum control to maximum control, are described in this section. Choose the scenario that best matches your site requirements, and then refer to the corresponding number in the table for guidance on how to configure your system for those requirements. NOTE: We strongly recommend that you set at least an Administrator password to prevent unauthorized changes to system settings. 1. No designated administrator or operator (Minimum control—not recommended) All users have equal access to all system functions

  • Canon ColorPass-Z7400, 4 4-41 Printer Setup options NOTE: The Configuration page does not show the SNMP Community Name. Save Changes Yes/No [Yes] Select Yes to activate any changes made in Network Setup; select No to return to the main Setup menu without making any changes. Printer Setup options Printer Setup configures the connections and printing behavior associated with a particular printing device. For more information on ColorPASS print connections, see “ColorPASS print connections” on page 3-1. TO ACCESS PRINTER SETUP OPTIONS In the following list of options, default val

  • Canon ColorPass-Z7400, 4 4-31 Network Setup options File Server Login administrator/supervisor/Enter Login Name [supervisor] This option appears only if a password is required for login, if there is no guest account, or the guest account is restricted. Choose Enter Login Name to enter your own login name and password or log in as a guest. Choose administrator or supervisor if you have those privileges. Enter Your Login Name [guest] This option and the next appear only if you selected Enter Login Name for the File Server Login. Enter your login name or sele

  • 5 5-11 Network Setup IPX/SPX Use this option to specify IPX/SPX frame types. The ColorPASS supports the following Ethernet frame types for IPX/SPX: Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP. You can also allow the ColorPASS to select the frame type automatically.

Related Products and Documents (Server):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Aiphone AI-900 Operating instructions manual aiphone/ai-900-4OC.pdf 13 Mar 2023 66 0.93 Mb
2 ZANKER ZKH 7629 Operation & user’s manual zanker/zkh-7629-DR9.pdf 20 Jan 2024 76
3 Philips CGA5722/05 Operation & user’s manual philips/cga5722-05-1E5.pdf 04 Mar 2023 24 3.75 Mb
4 Elenco Electronics XP-620K Assembly and instruction manual elenco-electronics/xp-620k-KKC.pdf 25 Aug 2022 20 0.64 Mb
5 Hitachi 15LD2550B User manual manual hitachi/15ld2550b-P6X.pdf 22 Oct 2023 38 2.81 Mb
6 KitchenAid KEBS278DSS6 Parts list kitchenaid/kebs278dss6-SU3.pdf 20 Sep 2023 12

Similar Resources:

  • IBM

    6C1

    (42 pages)
    ibm.com/redbooksIBM pSeries 610 Models 6C1 and 6E1Technical Overview and IntroductionVolker HaugScott VetterIntegrated light path diagnosticsTwo unique models: deskside or rack mountIntegrated storage optionsFront cover …
  • PRIMERGY

    BX600 S3

    (143 pages)
    1PRIMERGY BX600 Management Blade Hardware GuideAreas CoveredBefore Reading This ManualThis section explains the notes for your safety and conventions used in this manual. Make sure to read this section.Chapter 1About Management BladesThis chapter explains the system features and the component names of Management Blades.Chapter 2Installing and Removing Manage …
  • HP

    DL385 - ProLiant - G5

    (26 pages)
    Front View:Front View:Front View:Front View:Rear View:Rear View:Rear View:Rear View:1.Eight sockets for PC2-5300 DIMMs (DDR2-667) withAdvanced ECC1.T-10/T-15 Torx screwdriver2.External option blank2.Hot-plug fans, full redundancy3.NIC 2 connector3.Systems Insight Display4.NIC 1 connector4.Quick release lever for rapid server access5.Power supply bay 25.Suppo …
  • HP

    ProLiant SL4540 Gen8

    (48 pages)
    How are you going to scale out to petabytes with your current infrastructure?Big data, largely unstructured such as messages, images, readings from sensors, and GPS signals from cell phones, are growing at anexponential rate. The HP ProLiant SL4540 Gen8 Server solves the traditional structured database problems when dealing with big data.Implementing a scal …
  • Polycom

    Collaboration Server (RMX) 1800

    (2 pages)
    Installation Quick Start Guide for RealPresence Collaboration Server (RMX)1800Basic SetupConnecting the Cables to the RealPresence Collaboration Server 1800 System1 Insert the power cable into the power connector on the rear panel of the system.2 Connect the Management Network cable to LAN 1 port.3 Connect the media and signaling cable to LAN 2 port4 For sys …
  • Securgen

    NE-VS201

    (59 pages)
    Video ServerDigital Encoder & DecoderUser Manual Please carefully read these instructions before using this product. Save this manual for future use. NE-VS201model no.secur …

Comments, Questions and Opinions: