Manualios.com

Dascom Tally T2365 Quick Start Manual

Dascom Tally T2365 Manual Online:

4.75, 704 votes
Dascom Tally T2365 User Manual
Dascom Tally T2365 User Guide
Dascom Tally T2365 Online Manual

Text of Dascom Tally T2365 User Guide:

  • Quick start guide Technical data 31 ENGLISH ` Paper specifications For more information on general paper specifications as well as paper specifica- tions for the optional tractor units and the automatic sheet feeder, refer to the User guide on the Online CD-ROM. Fanfold paper Tractor1 Continuous single forms Single set of forms (requires individual testing) Paper weight No. of copies For

  • Dascom Tally T2365, Quick start guide Introduction 3 ENGLISH Introduction This Quick Start Guide is intended as a quick introduction into working with the printer and also to enable inexperienced users to operate the device properly. It de- scribes the most important functions of the printer and contains the essential infor- mation for your everyday work with the printer. A more detailed description of the printer, its characteristic features, and further information is contained in the User guide on the Online CD-ROM, which is inserted at the back of this manual. ` Symbols used Important information is highl

  • Dascom Tally T2365, Table of contents Quick start guide 2 Printing out status page 29 Technical data 30 Printer specifications 30 Paper specifications 31 Accessories 32 Quick Start - en . book Seite 2 Dienstag , 15 . September 2009 11:02 11

  • Dascom Tally T2365, Quick start guide Changing the ribbon cassette 13 ENGLISH Move the coloured friction tabs on the right and on the left into the direction of the respective arrows shown in the figure and raise the friction mechanism. Remove the used cassette. We recommend use of genuine ribbon cassettes only. Quick Start - en . book Seite 13 Dienstag , 15 . September 2009 11:02 11

  • © September 2009 DASCOM Europe GmbH 063206b GERMANY DASCOM Europe GmbH Heuweg 3 D-89079 Ulm Deutschland Tel.: +49 (0) 731 2075 0 Fax: +49 (0) 731 2075 100 www.dascom.com SINGAPORE DASCOM AP Pte Ltd 63 Hillview Avenue #08-22, Lam Soon Industrial Building Singapore 669569 Phone: +65 6760 8833 Fax: +65 6760 1066 www.dascom.com TALLY REPRESENTATIVES UNITED KINGDOM DASCOM GB Ltd ViewPoi

  • Quick start guide Paper handling 23 ENGLISH ` Removing paper Never use force to remove the paper from the printer. Otherwise the mechanical components may be damaged. Make sure that the printer is in offline mode; press the Online key, if necessary. Press the Park (1) key. If fanfold paper is loaded in the printer, it is fed to the tear position. The text Tear

  • Dascom Tally T2365, Paper handling Quick start guide 22 ` Moving the paper to the tear position You can use the Tear key to move the paper to the tear position. The tear edge is located at the front side of the paper output opening. Make sure that the printer is in online mode. If necessary, press the Online key. Press the Tear (4) key. The printer moves the perforation edge of the fanfold paper to the tear edge of the top cover . The display alternates between… and… After having torn off the paper, press the Exit key. The printer returns the paper to the first printing position. If a print

  • Dascom Tally T2365, Quick start guide Installation 7 ENGLISH ` Placing your printer Place the printer on a solid, flat, surface, ensuring that the printer is positioned in such a way that it can not topple, and that there is easy access to the control panel and paper input devices. Also ensure that there is sufficient space for the printed output. If you expect that frequent forward and reverse feeds will oc- cur, you should place the printer as shown in the figure, if possible. The power supply cable may be damaged if the pa- per edges cons

  • Dascom Tally T2365, Changing the ribbon cassette Quick start guide 16 Press down the coloured insertion tongue A. Move the print head carriage back and forth several times. If the ribbon is correctly seated, there must be no perceptible resistance. The ribbon should be transported during the travel from left to right. If this is not the case, you should check that the ribbon cassette is correctly inserted on the right. A Quick Start - en . book Seite 16 Dienstag , 15 . September 2009 11:02 11

  • Dascom Tally T2365, Control panel Quick start guide 10 Control panel The control panel and the keys are used for controlling the printer operation. The upper line of the display shows whether the printer is in Online or Offline mode and the paper path selected (Tractor1). ` Online mode After switching on, the printer is automatically set to online mode. Only in this mode can it receive data from the computer.  Tear key (4): Activates the tear function when fanfold paper is loaded (see “Moving the paper to the tear position”, page 22). If Load is displayed above this key, no paper is loaded in the printer or the printer is in park position. In this case the display switches betwee

  • Dascom Tally T2365, Changing the ribbon cassette Quick start guide 14 Raise the coloured insertion tongue A. Remove the coloured protections A and B. Insert the coloured ribbon tension knob into the right-hand front location of the new ribbon cassette. Turn the knob in the direction of the arrow in order to take up slack of the ribbon. A A B Quick Start - en . book Seite 14 Dienstag , 15 . September 2009 11:02 11

  • Dascom Tally T2365, Quick start guide Installation 9 ENGLISH ` Switching on the printer The power switch for switching on the printer is located at the bottom left at the front of the printer when viewed from the front. Quick Start - en . book Seite 9 Dienstag , 15 . September 2009 11:02 11

  • Installation Quick start guide 8 ` Connecting the printer Make sure that the printer is set to the correct voltage (e.g. 230 V in Europe, 120 V in the U.S.A.). To do this, check the plate above the power inlet at the rear of the printer. If the setting is incorrect, set the coloured switch at the rear of the printer to the correct position, using a pointed object (e.g. screwdriver

  • Dascom Tally T2365, This device fulfils the European standards requirements by complying with the Directive of the Commission dated May 3, 1989 (89/336/EEC) relating to electromagnetic compatibility and the Directive dated February 19, 1973 (73/23/EEC) relating to low-voltage electrical equipment. Conformity with the above mentioned Directives is indicated by the CE symbol attached to the device. Note: Conformity may be affected by: ■ using interface cables not complying with the specifications ■ non-observance of important instructions in the operator's manual ■ installing co

  • Dascom Tally T2365, Changing the ribbon cassette Quick start guide 12 Changing the ribbon cassette Before opening the cover, make sure that the printer is switched on so that it can execute automatic preparations for ribbon changing (widening the print head gap). During the process of initialization after powering on, the printer checks if a rib- bon cassette is installed. It also checks during the execution of a print job the op- erativeness of the ribbon cassette. These functions mandatory require the use of the man

  • Dascom Tally T2365, Quick start guide Printer at a glance 5 ENGLISH Printer at a glance ` View from the front ` Printer in tractor mode ` View from the rear Interface connectors Power cord connector Tractors Front cover Rear cover Control panel Top cover Power switch Bottom cover Quick Start - en . book Seite 5 Dienstag , 15 . September 2009 11:02 11

  • Dascom Tally T2365, Quick start guide Paper handling 19 ENGLISH Open the coloured latch lever and align the tractor so that the first printing position on the paper matches the X mark on the printer housing. Lock the coloured lever again. Place fanfold paper into the left-hand tractor. Open the coloured latch lever of the right-hand tractor and align it to the paper width. Insert the fanfold paper into the right-hand tractor. Make sure that it is inserted by the same length as on the left- hand tractor in order to avoid any paper jam. Close the tractor flap and lock the tractor by turning the trac- tor lever to the rear. Do not tension the paper excessively to avoid tear- ing the perforation hol

  • Dascom Tally T2365, Settings Quick start guide 28 ` Selecting character density and font You can use the CPI (Character Per Inch) key in setup mode to select the number of characters per inch to be printed. You can use the Font key to select fonts. Press the Setup key. The printer changes to setup mode. Press the Char (4) key. Press the CPI (4) or Font (1) key (in our example, press CPI). Use the < (2) or > (3) key to set the desired character density. Confirm the selec- tion by pressing the Set (1) key. You can cancel the selection and leave the setting unchanged by pressing the Exit (4) key. If you

  • Dascom Tally T2365, “All rights reserved. Translations, reprinting or copying by any means of this manual complete or in part or in any different form re- quires our explicit approval. We reserve the right to make changes to this manual without notice. All care has been taken to ensure accuracy of information contained in this manual. However, we cannot accept responsibility for any errors or damages resulting from errors or inaccuracies of information herein.” «Tous droits réservés. Toute reproduction ou traduction de ce manuel, qu'elle soit complète, partielle ou sous une forme différente es

  • Dascom Tally T2365, Paper handling Quick start guide 20 Make sure to align the paper stack in parallel with the printer and that the paper flow is unobstructed. Lower the front cover. Switch the printer on. The active paper source (Tractor1) appears in the display. The display alternates between… and … The paper is automatically loaded when the printer is in online mode and receives data from the computer. Only press the Load (4) key if you want to load paper before starting the printout. 90 Quick Start - en . book Seite 20 Dienstag , 15 . September 2009 11:02 11

  • Dascom Tally T2365, Quick start guide Printing out status page 29 ENGLISH Printing out status page The status page contains all selected menu settings and the installed control soft- ware and the character generators. Make sure that blank paper is inserted in the valid paper source (default is Tractor 1). Keep the key 4 depressed for approx. 5 seconds while turning on the printer. After completion of the initialization the printer pulls the paper in print po- sition and begins with the printout. The status page contains important i

  • Dascom Tally T2365, Paper handling Quick start guide 18 Paper handling This section describes how to load fanfold paper, transport paper and move the pa- per to the tear position. ` Loading paper Your printer can process fanfold paper. For information on the supported paper sizes, please refer to page 31 (“Paper specifications”). Only use dust-free or low-dust paper. Many paper qualities are suitable for this printer. For more information, please refer to the User guide on the Online CD- ROM. The printer by default is adjusted in such a way, that it will aut

Related Products and Documents (Printer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Mio MOOV 500 Series Operation & user’s manual mio/moov-500-series-Y2T.pdf 05 Feb 2023 116
2 Century Sedona 11-975 Instruction manual century/sedona-11-975-I6X.pdf 04 Jan 2024 16 1.88 Mb
3 Sony STR-DH700 Specification sheet sony/str-dh700-9QU.pdf 10 Sep 2023 2 0.45 Mb
4 Calculated Industries 3416 Pocket reference manual calculated-industries/3416-3KY.pdf 11 Aug 2023 41 0.23 Mb
5 Broan B3030SS Instructions manual broan/b3030ss-NRT.pdf 04 Jan 2023 20 1.87 Mb
6 Sanyo EM-P410WS Service manual sanyo/em-p410ws-H3E.pdf 31 Mar 2023 23 0.82 Mb

Similar Resources:

  • HP

    586dn

    (16 pages)
    www.hp.com/support/pagewidecolor586MFP586dn 586z586fFDSV�ORFNVKLIW$�6�'� )�*�+�-�.�/=� ;�&�9�%�1�0#�DOWDOWVKLIWHQWHU��"���³µPageWide Enterprise Color MFP 586ENInstallation GuideFRGuide d’installationESGuía de instalaciónPTGuia de instalaçãoESLea esto primeroG1W39-90901.indd 1 30-10-2015 21:0 …
  • Panasonic

    KX-P7100

    (4 pages)
    Setup Guide Laser Printer Model No. KX-P7100Thank you for purchasing a Panasonic KX-P7100 Laser Printer.■ Using the ManualsSetup Guide: Refer to this guide for basic setup procedures and necessary precautions for safety and use. Be sure to read“For Your Safety” on the back of this guide before setting up the printer and keep this document in …
  • Brother

    P-touch 1950

    (130 pages)
    • Read this User’s Guide before you start using your P-touch.• Keep this User’s Guide in a handy place for future reference.• Lisez attentivement ce guide avant d’utiliser le P-touch pour la première fois.• Conservez ce guide dans un lieu sûr en vue de référence ultérieure.USER’S GUIDEMODE D’EMPLOI1950 …
  • Canon

    2171B002

    (532 pages)
    Quick Start GuideKurzanleitungGuide de démarrage rapideAan de Slag-gidsGuía de iniciación rápidaGuida rapida all'installazioneGuia de consulta rápidaIntroduktionsvejledningΟδηγός Γρήγορης ΕκκίνησηςKort innføring PikaopasSnabbguideStručná příručkaBeüzemelési útmutatóSzybkie wprowadzenieStručná príručkaКратк� …
  • Xerox

    CopyCentre 118

    (2 pages)
    1Xerox CopyCentre/WorkCentre 118Duplex Kit Installation GuideGuide d'installation du kit recto versoGuida all'installazione del kit fronte/retroInstallationsanleitung Duplex-KitGuía de instalación del kit a dos carasGuia de Instalação do Kit Duplex893E 19050MB3065Y6-123 …
  • Samsung

    SCX-4600

    (121 pages)
    SCX-4600 SeriesSCX-4623 SeriesMulti Functional PrinterUser’s Guideimagine the possibilitiesThank you for purchasing this Samsung product.Downloaded From ManualsPrinter.com Manuals …

Comments, Questions and Opinions: