Manualios.com

Blackbox -M Operation & User’s Manual

Blackbox -M Manual Online:

4.9, 1581 votes
Blackbox -M User Manual
Blackbox -M User Guide
Blackbox -M Online Manual

Text of Blackbox -M User Guide:

  • Blackbox -M, 6 3 Initial Installation REPLACING FUSES If the fuse blows, determine the cause, then correct the problem. After the problem is resolved, replace the fuse. If newly installed fuses continue to blow, disconnect the power cable and contact your autho- rized dealer or an authorized servi-cecenter for assistance. Only use fuses of the specified type and rating, otherwise the transceiver could be damaged. After connecting the transceiver to the power supply, the supply voltage can be displayed on LCD by pressing the FUN key together with the key. The displ

  • Blackbox -M, 11 5 According to practical application,you can set the radio works as Amateur Transceiver mode or Professional Transceiver mode . There are also 2 levels operation menu to set functions as you need. It is easy and convenient (From No.1 to No. 15 are channel function setup,From No.15 to No.29 are general setting setup). 8PSLJOH.PEF 1. #ZQSPHSBNNJOHTPGUXBSF" In PC software's "General Setting"menu ,choose "Display Mode" to select Amateur Transcei

  • Blackbox -M, CONTENTS HIGH/MID/LOW Power Selection ....................................................20 Band-width Selection .......................................................................20 TX OFF Setup.................................................................................. 21 Busy Channel Lockout .....................................................................21 Editing Channel Name .....................................................................21 Reverse TX/RX ...............................................................................

  • 20 8 Turn selector knob to select the desired 3. combination If select "SQ",it indicates you can hear the calling from caller when receive a matching carrier. If LCD displays "CTC",it indicates you can hear the calling from caller when receive a matching carrier and CTCSS/DCS signaling . If LCD displays "TON",it indicates you

  • 22 8 Press 2. / key to choose No.12 menu, LCD displays "REV—OF". Turn selector knob to select the desired 3. setting. ON:Enable Frequency Reverse OFF:Disable Frequency Reverse. After edition,press 4. key to exit. Talk Around Press 2. / key to choose No.14 menu, LCD displays”COMP--OFF”. Turn selector knob to select the desire

  • Blackbox -M, 4 Connect the DC power cable to the transceiver's power supply 6. connector. Press WKHFRQQHFWRUV¿UPO\WRJHWKHUXQWLOWKHORFNLQJWDEFOLFNV If the ignition-key on/off feature is desired(optional feature),use the 3 Red Black Ext. Power jack DC power cable Initial Installation DC Power Cable Connection Mobile Operation In many cars,the cigar-lighter plug is always powered. If this is the case, you cannot use it for the ignition key on/off function. The vehicle battery must have a nominal rating of 12V. Never connect the

  • Blackbox -M, Nice Housing, Stoutness & Stability, Advanced and Reliable functions, Perfect & Valuable. Approval. BLACKBOX-M mobile radio especially designs for drivers and it pursues company philosophy of innovation and practicality. NOTE :KHQSURJUDPPLQJWKHWUDQVFHLYHUUHDGWKHIDFWRU\LQLWLDOGDWD¿UVWO\WKHQUHZULWHWKHIUHTXHQF\DQGVLJQDOLQJHWF RWKHUZLVHHUURUVPD\RFFXUEHFDXVHRIGLIIHUHQWIUHTXHQF\EDQGHWF Models Apply To This Manual: BLACKBOX-M Mobile radio BLACKBOX-M Mobile Radio Applicable Software: BLACKBOXSetup

  • Blackbox -M, 23 8 menu, LCD displays”D--XXX” XXX is radio's DTMF SELF ID. Press 3. NH\WRFRQ¿UPDQGH[LW Radio's 5TONE SELF ID ENQUIRY Press and hold 1. key for over 2s to enter general setting menu. Press 2. / key to choose No.17 menu, LCD displays"F--XXXXX", "XXXXX" is radio's 5TONE SELF ID. Press 3. NH\WRFRQ¿UPDQGH[LW Voice Prompt The prompting tone provides confirmation of entry, error status or malfunctions of the transceiver. You can enable or disable this function. Press and hold 1. key for over 2s to enter general setting menu. Press 2. / key t

  • 8 4 NO. KEY )81&7,21  Pow(Power) Power on/Off  VOL Adjust Volume Key  Main Dial Change frequency, memory channel and scan direction etc.  FUN/SET Function Key  V/M/MW Switches between VFO mode and Channel mode  MHz/SHIFT Step Size Key ( step:1MHz)  TS/DCS/LOCK Sets CTCSS and DCS value  CAL/H/L Call key  SQL/D Squelch off  Data T erminal Data reading/writ

  • Blackbox -M, 15 7 Shortcut Operations CTCSS SCAN Repeatedly press key until LCD displays and icons ,then hold key for 1S to enter into CTCSS scanning. 2QFH¿QGLQJDPDWFKLQJ&7&66VLJQDOLQJLW will stop for 15s then scan again. Under channel mode,this operation can be temporarily used by user. Once the radio is turned off or switched to another channel,the temporary setting will be erased. When LCD appears 3. iron, it means current channe can be set with DCS encode and decode together, turn selector knob or press Microphone's [ / ] to select desired DCS encode and decode. CTCSS:62.5-254.1, Total 51group

  • Blackbox -M, 27 9 You can operate the transceiver by keypad or input desired frequency or channel through the QHM-03 microphone (Note:In professional transceiver mode,other keys are invalid except PTT,[ / ], and ). Keypad Lock Pull down the slide switch to lock position,The lamp is turned off and all of keypads is not work except PTT switch. Transmitting DTMF By Microphone KeyPAD Switches between VFO and channel mode In standby,press key to switch between channel mode and Frequency mode (VFO). Short Calling In standby,press

  • Blackbox -M, 16 Press key until LCD displays 1. icon, then press key until, LCD displays icon, it indicates keypad lockout function is valid. This will automatically transmit pre-programmed and stored DTMF tones. And they are often used to remote control electronic devices or AUTOPATCH phone systems available on some repeater. Press and hold 1. key, then press key to enter the auto-dialer enquiry mode, LCD displays current default data and current group displayed on left. If no data in current group,it shows"EMP

  • Blackbox -M, 36 15 67.0 79.7 94.8 110.9 131.8 156.7 171.3 186.2 203.5 229.1 69.3 82.5 97.4 114.8 136.5 159.8 173.8 189.9 206.5 233.6 71.9 85.4 100.0 118.8 141.3 162.2 177.3 192.8 210.7 241.8 74.4 88.5 103.5 123.0 146.2 165.5 179.9 196.6 218.1 250.3 77.0 91.5 107.2 127.3 151.4 167.9 183.5 199.5 225.7 254.1 Attached Chart 50 groups CTCSS Tone Frequency(Hz) 1024 groups DCS Code.                             �

  • 12 In standby, press key or Microphone's key until appear , this indicates current channel in channel mode. Repeat above 6 PWR KEY Dial Frequency decrease Frequency increase Volume Knob Min Volume Max Volume Basic Operations Switching The Power On/Off Adjusting The Volume Switch between VFO and Channel mode Adjusting Frequency/Channel THROUGH SELECTOR KNOB

  • CONTENTS 1HZDQG,QQRYDWLYH)HDWXUHV..............................................1 Supplied Accessories/Optional Accessories.....................2 Supplied Accessories....................................................................... 2 Optional Accessories .......................................................................2 ,QLWLDO,QVWDOODWLRQ ......

  • Blackbox -M, 29 9 TOT (Time-out timer) The time-out timer limits the amount of transmitting time. When you reach the time limit which has been programmed by your dealer, your transmission will be cut off. In order to transmit again, you must release PTT button to reset the timer. In standby,press 1. ,then press “LCD displays "TOT-X". Press [ 2. / ] to select the desired value. 3UHVVQXPEHUNH\WRFRQ¿UPDQGH[LW 3. CTCSS/DCS Encode and Decode In standby,press 1. ,then press to enter into

  • Blackbox -M, 28 9 Reverse TX/RX TX frequency turns to RX frequency & RX frequency changes to TX frequency. The signaling will also be reversed if CTCSS/DCS signaling exited in this channel. In standby,press 1. ,then press ,LCD displays “REV—OF”. Press [ 2. / ] to select the desired value. ON:Enable Frequency Reverse OFF:Disable Frequency Reverse 3UHVVQXPEHUNH\VWRFRQ¿UPDQGH[LW 3. In corresponding mode,press then press key to enter into scanning. In scanning mode,press / to change scan direction. Busy Channel

  • Blackbox -M, 17 Turn selector knob to choose group you 2. desired. Total:16 group,01-16. 7 Shortcut Operations Press 3. key to enter into editing of current group,press MIC's numeric keys to set your desired data. The display scrolls when the 7th digit 4. is entered. The numbers 0-9, --, A-D, * and # can be stored up to a total of 23 digits. After editing,press PTT or 5. key to send current group and store edited DTMF signaling. Press to exit and store. Press 1. key, then press key to enter into auto-dialer enquiry Turn selector knob to select desired 2. transmitting

  • Blackbox -M, 25 8 menu, LCD displays"LAMP--25" Turn selector knob to select the desired LCD backlight brightness 3. 1-32 total 32 level backlight brightness. Press 4. NH\WRFRQ¿UPDQGH[LW'HIDXOW Pilot Frequency This function uses to start repeater .It needs a certain intensity Pilot Frequency to start dormant repeater.As usual,no need to send pilot frequency again once repeater started. Press and hold 1. key for over 2s to enter general setting. Press 2. / key to choose No.25 menu, LC

  • Blackbox -M, 35 14 6SHFL¿FDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFHGXHWRDGYDQFHPHQWVLQ technology. General Frequency Range VHF: 136-174MHz UHF: 400~490MHz Number of Channels 200 channels Channel Spacing 25K (Wide Band) 20K(Middle Band) 12.5K (Narrow band) Phase-locked Step 5KHz, 6.25KHz, 8.33KHz, 10KHz, 12.5KHz, 15KHz, 20KHz, 25KHz, 30KHz, 50KHz Operating Voltage 13.8V DC ±15% Squelch Carrier/CTCSS/DCS/5Tone/2Tone/DTMF Frequency Stability ±2.5ppm Operating Temperature -20 ą ~+60 ą Dimensions(WxHxD) 145 (W) x 47 (H) x 190 (L)mm Weight about 1.2Kg 5HFHLYHU(76,(1VWDQGDUGWHVWLQ

  • Blackbox -M, 13 Basic Operations Transmitting Tone-Pulse Transmitting OPTIONAL SIGNALING Press and hold [PTT] key, then press Microphone [ ] key to transmit current selected tone-pulse signal. Press and hold [PTT] key, then press Microphone key or press key in front panel or press Mic's key to transmit pre-stored and selected DTMF/2Tone/5Tone optional signaling. Channel Edit Channel Delete Under frequency mode (VFO), turn 1. selector knob to select the desired frequency or input frequency by MIC's numeric keys. Press 2. key to enter CTCSS/DCS signaling setup, turn selector knob to select the desired si

  • Blackbox -M, 37 15                                                           �

  • Blackbox -M, 5 3 Red Black Regulated power supply (QRP-01) DC power cable with fuse holder (QPL-01) Regulated power supply (QRP-01) Ext. Power jack ACC terminal Cigar-Plug connection Initial Installation Before connecting the DC power to the transceiver, be sure to switch the transceiver and the DC power supply OFF. Do not plug the DC power supply into an AC outlet until you make all connections. ,QRUGHUWRXVHWKLVWUDQVFHLYHUIRU¿[HGVWDWLRQRSHUDWLRQ\RXZLOO need a separate 13.8V DC power supply (not included) , power supply( QRP-01) as optional accessories. Please contact local dealer to require. The recommended current capacity of

  • Blackbox -M, 10 4 NO. KEY )81&7,21  UP Increase frequency ,channel number or setting value.  DOWN Decrease frequency, channel number or setting value.  PTT Press the PTT (Push-TO-Talk) key to transmit.  Number Key Input VFO frequency or DTMF dial out etc..  DTMF ON/ OFF Switches between DTMF dialing or function operating.  LOCK Switch Locks out the UP ȟ Down ȟ Numerical keys and Function keys.  MIC Speak here during transmission. ,FZ1BE4FSJBM%BUB 7 %08/ 61 .*$(/% .*$ 155 (/% microphone MIC Connector Diagram(in the front view of connector) Getting Acqua

Related Products and Documents (Radio):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Electrolux EOB63000 Operation & user’s manual electrolux/eob63000-9V1.pdf 21 Oct 2023 60 1.14 Mb
2 Pro's Kit PT-0721 Operation & user’s manual pro-s-kit/pt-0721-JTC.pdf 06 Oct 2022 12
3 Dynex DX-TVM111 Quick setup manual dynex/dx-tvm111-5P8.pdf 02 Jul 2022 2 0.49 Mb
4 Lab.gruppen C Series C 16 4 Specifications lab-gruppen/c-series-c-16-4-713.pdf 19 Feb 2024 2
5 Xoro HRT1100 Operation & user’s manual xoro/hrt1100-POA.pdf 18 Sep 2022 12
6 Lucos Blackbox PRO Operation & user’s manual lucos/blackbox-pro-XX9.pdf 13 Jan 2024 16

Similar Resources:

  • Logitech

    Logitech UE

    (16 pages)
    for iPad, iPhone, iPod touch and iTunes专为 iPad, iPhone, iPod touch 和 iTunes 打造Air SpeakerGetting started withLogitech UE™ Air SpeakerWireless speaker with AirPlay快速入门罗技UE™ Air Speaker无线音箱 (AirPlay 技术) …
  • Kompernass

    KH 2022

    (38 pages)
    KOMPERNASS GMBH · BURGSTRASSE 21 ·D-44867 BOCHUMwww.kompernass.comID-Nr.: KH2022-01/08-V3SHORTWAVE RADIOKH 20224bSHORTWAVE RADIOOperating instructionsVÍCEFREKVENČNÍ ROZHLASOVÝ PŘIJÍMAČNávod k obsluzePRIJÍMAČ RÁDIOVÝCH VĹNNávod na obsluhuCV_KH2022_AR2503_4b.qxp 26.02.2008 10:54 Uhr Seite 1 …
  • LENCO

    DIR-141

    (193 pages)
    1 Model: DIR-141 User manual – Stereo internet radio with DAB+, FM and Bluetooth Gebruikshandleiding – Stereo internetradio met DAB+, FM en Bluetooth Bedienungsanleitung – Stereo-Internetradio mit DAB+, UKW und Bluetooth Mode d’emploi – Radio Internet stéréo avec DAB+, FM et Bluetooth Manual de usuario – Radio estéreo con Internet, DAB+, …
  • Panasonic

    RF-2400

    (4 pages)
    ITALIANOPrecauzioni≥Se non si usa l’apparecchio per un lungoperiodo di tempo, oppure se lo si usa soltantocon la corrente della rete, togliere tutte le pileper evitare danni potenziali causati da unaloro eventuale perdita d’acido.≥Evitare di usare o di lasciare l’apparecchio vicinoa fonti di calore.≥Fare attenzione a non tagliuzzare, danneggiare …
  • Motorola

    MTP850

    (112 pages)
    68015000877-G*68015000877* EN© 2014 Motorola Solutions, Inc. All rights reserved.Mobile Release 14.0 MTP850 SPRODUCT INFORMATIONMANUALDecember 2014 …
  • Cobra

    MR HH300

    (25 pages)
    A1EnglishOur Thanks to You andCustomer AssistanceIntro Operation CustomerAssistanceWarrantyNoticeSecondary IconsCaution WarningInstallationCustomerAssistanceIntroductionThank you for purchasing a CobraMarine™VHF radio.Properly used, this Cobra®product will give you many years of reliable service.How Your CobraMarine™VHF Radio WorksThis radio is a batter …

Comments, Questions and Opinions: