Manualios.com

Intellinet 522328 Operation & User’s Manual

Intellinet 522328 Manual Online:

4.85, 1975 votes
Intellinet 522328 User Manual
Intellinet 522328 User Guide
Intellinet 522328 Online Manual

Text of Intellinet 522328 User Guide:

  • Intellinet 522328, Thank you for purchasing the INTELLINET NETWORK SOLUTIONS ™ Gigabit PCI Network Card, Model 522328. A high-performance network adapter designed to t into the PCI slot of your desktop computer, this card allows you to upgrade your computer to support Gigabit network speeds without changing your copper network cabling scheme to ber optic. And with the easy-to-follow instructions in this manual, you’ll soon be able to enjoy the benets of these additional features: • Supports Gigabit speeds over existing netw

  • Intellinet 522328, NOTE: 1000Base-T signaling requires four twisted pairs of Category 5/6 balanced cabling, as specied in ISO/IEC 11801:1995 and ANSI/EIA/ TIA-568-A (1995) and tested for additional performance using testing procedures dened in TIA/EIA TSB95. FCC Statement This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference; and 2. This device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rule

  • Intellinet 522328, hardware iNstallatioN 1. Turn off the computer and unplug the power cord. 2. Remove the computer’s cover (refer to its manual if necessary). 3. Insert the contact edge of the Gigabit PCI Network Card into the connector of any available PCI bus master expansion slot. Press the card rmly into the slot, making sure the card’s contacts are fully seated. 4. Install the bracket screw that secures the card to the computer chassis. 5. Replace the computer’s cover. 6. Connect the UTP cable to the RJ-45 network connector. software iNstallatioN If the BIOS section of your computer’s b

  • Intellinet 522328, 6 WINDOWS Me 1. With the Gigabit PCI Network Card inserted into the PCI slot, turn the computer on. 2. An Add New Hardware Wizard screen will display “PCI Ethernet Controller.” Insert the enclosed driver CD. 3. Select “Install the software automatically” and click “Next.” 4. When the device name displays on the Add New Hardware Wizard screen, click “Finish.” 5. Restart the computer. WINDOWS NT 4.0 1. With the Gigabit PCI Network Card inserted into the PCI slot, turn the computer on. 2. Click the My Computers icon; double-click the Control Pan

  • 7 search locations:” Select “Specify a location” and then click “Next.” 5. Insert the enclosed driver CD. 6. On the next Found New Hardware Wizard screen, enter the driver pathname “E:\” (E representing your CD-ROM drive), then click “OK.” 7. The next Found New Hardware Wizard screen will display “The wizard found a driver for the f

  • Intellinet 522328, LINUX KERNEL 2.2.x 1. Compiling rtl8169.c “gcc -DMODULE -Wall -Wstrict-prototypes -O6 -c rtl8169.c” 2. Move the object code rtl8169.o to the directory “/lib/modules/2.2.14-5.0/net” “cp rtl8169.o /lib/modules/2.2.14-5.0/net” 3. Insert module to kernel “insmod rtl8169” 4. Check the driver status “dmesg” 5. The media can be forced to one of ve modes (see below). The link speed and duplex mode can be forced in ve modes. Command: “insmod rtl8169 media = SET_MEDIA” Example: “insmod rtl8169 media=0x04” will force

  • Intellinet 522328, 5. The media can be forced to one of the ve modes (see below). Cmd: “insmod r8169 media = SET_MEDIA” Example: “insmod rtl8169 media=0x04” will force PHY to operate in 100 Mpbs half duplex. SET_MEDIA can be: _10_Half = 0x01 _10_Full = 0x02 _100_Half = 0x04 _100_Full = 0x08 _1000_Full = 0x10 NOVELL NETWARE SYSTEM (4.X) 1. Update Netware Server to 4.2. NOTE: If you don’t update to 4.2, use the update le “MSM.NLM, ETHERTSM.NLM” on the CD. 2. Run NetWare Server Syst

  • Intellinet 522328, 3. In the Installation Options menu, select “Driver options.” 4. In the Driver Options menu, select “Congure network drivers.” 5. In the Additional Driver Actions menu, select “Select a driver.” 6. Press <Ins> to install an unlisted driver, then press <F3> to specify a different path. 7. Insert the driver CD and specify the path “E:\NWServer\” (E representing your CD-ROM drive). 8. In the Select a driver to install: menu, select “Gigabit Ethernet Network Adapter” (Gigabit PCI Network Card). 9. If necessary, select the Select/Modify driver parameters and protocols” menu. 10. Follow any remaining instructions to complete the dr

  • Intellinet 522328, INTELLINET NETWORK SOLUTIONS ™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or visit www.intellinet-network.com. Copyright © INTELLINET NETWORK SOLUTIONS All products mentioned are trademarks or registered trademarks of their respective owners.

More Instructions:

DOWNLOAD

Related Products and Documents (PCI Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Velleman WS3080 Operation & user’s manual velleman/ws3080-A7Y.pdf 16 Jul 2022 62
2 Fishman AGP-2 Template fishman/agp-2-2W7.pdf 13 Jun 2023 1 0.03 Mb
3 Zanussi ZDH7332P Operation & user’s manual zanussi/zdh7332p-FBX.pdf 15 Feb 2024 60
4 Panasonic Transistors 2SB1218G Specifications panasonic/transistors-2sb1218g-ED3.pdf 17 Mar 2024 5 0.27 Mb
5 AIRIS L106 (FRONTALESPEJO)-1 Manual  airis/l106-frontalespejo-1-687.pdf 01 Apr 2023 1 1.03 Mb
6 Onkyo DS-A4 Instruction manual onkyo/ds-a4-QJU.pdf 21 Nov 2022 16

Similar Resources:

  • red lion

    PAXCDS

    (2 pages)
    1DESCRIPTIONThis bulletin serves as a guide for the installation of PAX Setpoint cards. The setpoint cards are available as dual relay, quad relay, quad sinking transistor, quad sourcing transistor/SSR drive, or dual triac/dual SSR drive outputs.INSTALLING A PAXCDS OPTION CARDCaution: The option and main circuit boards contain static sensitive components. Be …
  • D-Link

    Air DWL-520

    (51 pages)
    D-LinkAir DWLDWL--520520 11Mbps Wireless LAN PCI Adapter Manual Please see the Quick Install Guide, included separately, for installation instructions. Building Networks for People …
  • Cyber Power

    RCCARD100

    (2 pages)
    Copyright © 2021 Cyber Power Systems, Inc. All rights reserved.231INSTALLATION GUIDE3. Insert and tighten the retaining screws.4. Connect an Ethernet cable to the Ethernet port of the Remote Cloud Card.2. Install the Remote Cloud Card into the expansion slot.1. Remove the two retaining screws from the expansion slot, and remove the cover.Step 1. Hardware I …
  • Black Box

    IC904C

    (26 pages)
    (217) 352-9330 | [email protected] | artisantg.com-~ ARTISAN® ~I TECHNOLOGY GROUP Your definitive source for quality pre-owned equipment. Artisan Technology Group Full-service, independent repair center with experienced engineers and technicians on staff. We buy your excess, underutilized, and idle equipment along with credit for buybacks and trade-ins. C …
  • D-Link

    DI-714P+

    (5 pages)
    D-Link UpLink Newsletter 1 October 2002 D-Link UpLink NewsletterOctober 2002 >>>>>>>>>>NEW D-LINK PRODUCTS<<<<<<<<<< POWERFUL NEW WIRELESS SOLUTIONS FROM D-LINK SET TO LAUNCH IN OCTOBER D-Link has expanded our line of wireless solutions with three new wireless products launching in October in …
  • OpenVox

    AE810P

    (30 pages)
    A810P/AE810P on DAHDI User Manual OpenVox Communication Co. LTD. URL: www.openvox.cn OpenVox Communication Co.Ltd A810P/AE810P on DAHDI User Manual Version: 2.2 …

Comments, Questions and Opinions: