Manualios.com

JVC MC-8100U Service Manual

JVC MC-8100U Manual Online:

4.65, 2486 votes
JVC MC-8100U User Manual
JVC MC-8100U User Guide
JVC MC-8100U Online Manual

Text of JVC MC-8100U User Guide:

  • JVC MC-8100U, Symbol No. Part No. Part Name Description Symbol No. Part No. Part Name Description MC-8100U 5.1 CHASSIS BOARD ASSEMBLY PARTS LIST 01 01`````` IC2 MC74AC573N I.C. IC3 MC74AC573N I.C. IC4 PLSS1610 EP-ROM M27C1024-12F1 IC6 MC74HC04AN I.C(DIGI-MOS) MOTOROLA IC7 MC74HC08AN I.C.(M) MOTOROLA IC8 SN74HC138N I.C(DIGI-MOS) TEXAS IC9 SN74HC138N I.C(DIGI-MOS) TEXAS IC10 SN74HC174N I.C.(M) IC11 SN74HC174N I.C.(M) IC12 SN74HC174N I.C.(M) IC14 BA6259N I.C(MONO-ANA) IC15 BA6259N I.C(MONO-ANA) IC18 SN74HC245N I.C(DIGI-MOS) TEXAS IC19 SN74HC245N I.C(DIGI-MOS) TEXAS IC20

  • 16 POWER ON 1. NORMAL DISPLAY 2. ERROR DISPLAY Power On INITIALIZING Pattern 1 Normal display Pattern 2 SELECT SELECT MODE SELECT ENTER Error display 1 3. ID No. DISPLAY SELECT SELECT SELECT SELECT ENTER 4. PANEL OPEN MODE ENTER SCSI-ID display Error display 2 Error display 8 SELECT SELECT SELECT DR1 : DR2 : DR4 : SELECT SELECT SELECT SELECT SELECT 5. DOOR OPEN MO

  • JVC MC-8100U, 4 CONTENTS 1. PRECAUTIONS ..................................................................................................................................................... 5  Installation and handling precautions ................................................................................................................. 5  Disc handling precautions .................................................................................................................................. 5 2. NAMES AND FUNCTIONS OF PARTS ......................................................................................

  • JVC MC-8100U, MC-8100U Enlarged view Tray lock release lever Loader (black)Disc tray Eject lever (white) Slider (black) 2.6 Countermeasures Against Mechanical Trouble (For MC-R400U) 1. How to remove a disc which remains in the drive (1) When the carrier is not located in front of the drive 1 Set the manual mode, then set the sub-mode to [00] or [01] using the 10-key, and press the numeric key 2 to move the carrier close to the upper or lower limit. 2 Ensure that the disc is not rotating. 3 Using a screwdriver or thin rod, push the drive eject lever in to eject the drive thus making it possible for the tray to be pull

  • JVC MC-8100U, 13 ENGLISH 3-5. Connecting the power cord and cables Setup CAUTION Turn OFF the power of all equipment before starting connections. Connecting the equipment while power is ON may lead to a malfunction. • The allowable length for the SCSI cable inside the equipment is about 1.2 meters. In the case of SCSI-2 10 Mbytes/sec. sync operation, if the total length of the SCSI cabling including those cables outside the equipment exceeds 3 meters, a malfunction may result. However, if the SCSI-2 5 Mbytes/sec. async mode is used the total length of the SCSI cabling should be no more than 6 meters. • Use a shielded SCSI cable with high-impedance specifications and be sure to attach the provided

  • JVC MC-8100U, 27 ENGLISH In the event of an error, the control panel indicator blinks and the LCD shows the error details by overriding any other information. 10-1. Error code explanation ERROR OCCURRED ! DISC = 024 CODE = CU–04 Display when CODE = CC-31 DISC = 024 CODE = CU – 04 Disc No. Error code Unit detail code Unit in error Disc No. : Shows the disc No. being accessed at the moment of error occurrence. "---" is displayed if no disc is accessed at the moment of error occurrence. E R OR MAGAZ I NE R No. : – 2 If the transport lock of the carrier has not been opened, this section shows “

  • JVC MC-8100U, MC-8100U 1 SS412119 SPRING(SDL-A) 2 SS412762 SDL-HOOK 3 SS412763 SDL-SHAFT BRACKET 4 SS412118-001 SDL-SHAFT 5 SS412120 SPRING(SDL-B) 6 SS35500-002 SDL-LEVER 7 SS35949 IL BRACKET 8 SS412475-003 CPLH BASE 9 SS412474-003 CPL-HOOK 10 SS412481-002 SPRING S1 QYSDST3006M SCREW S2 SS411339-001 SCREW 4.9 IL BLACKET ASSENBLY M5 DescriptionPart No. Part Name Symbol No. 4.10 IL BRACKET ASSEMBLY PARTS LIST M5 4-10 M5MM```` 7 S1 10 9 8 S2 1 4 5 2 S1 3 6 Caught on to hook

  • JVC MC-8100U, MC-8100U 3.2 CHASSIS BLOCK DIAGRAM CN730 DRIVE NO. 1 CN420 LOWER LIMIT SENSOR CN750 DRIVE NO. 3 CN740 DRIVE NO. 2 LATCH & MOTOR DRIVER LATCH & MOTOR DRIVER INPUT ADDRESS DECODER OUTPUT ADDRESS DECODER CN760 DRIVE NO. 4 CN900 DISPLAY BOARD LATCH RESET CIRCUIT CATCHER MOTOR DRIVER MAIL SLOT, TRAY LOCK MOTOR DRIVER BACKUP BATTERY EPROM 27C1024 CPU MB90T678BPF ADDRESS A0 TO A15 DATA D0 TO D15 4MHz CN430 ROTARY ENCODE CN500 CARRIER MECHANISM BOARD CN600 MAIL SLOT BOARD CN3 U/D MOTOR SCSI BOARD CN205 SCSI BOARD CN110 POWER SUPPLY +5V +12V +14V 3-2

  • JVC MC-8100U, 11 ENGLISH Setup 3-2. Removing the transport protective materials After opening the transport lock, proceed to the following steps without closing the door. 1. Remove magazine No. 1. ( a See “9-1. Ejecting/loading the magazines” on page 24.) 2. Pull out the protective material forwards. 3. Load magazine No. 1. ( a See “9-1. Ejecting/loading the magazines” on page 24.) 4. Repeat the same operation for magazine No. 2. TOP TO P Protective material 2 • In the case of re-transporting, it is necessary to remove all the discs and re-attach the protective transport materials using the reverse procedure to the above. When this operation is required,

  • JVC MC-8100U, MC-8100U 2.2.4 Packing Mode (1) Purpose: For shipping the library’s main unit, the carrier mechanism is moved to the fixing position located at the lower end of the unit and the drive is clamped. (2) Activation: · While pressing the the key “1” on the 10-key pad, turn the power ON. (3) Operation: (when Drives 1 and 2 are connected) 1 Performs carrier initial operation. 2 Checks whether the tray is left in the mail slot or not. If the tray is left, it is returned to the magazine. 3 Checks whether the tray is left in the drive 1 or not. If the tray is left, it is returned to the magazine. 4 Checks whether the t

  • JVC MC-8100U, 2 IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN - and - YELLOW: EARTH BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug. proceed as follows. The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked with the letter E or the safety earth symbol or coloured GREEN or GREEN-AND YELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or which is coloured BLACK. The wire which is col

  • JVC MC-8100U, 7 ENGLISH 2-2. Interior Names and Functions of Parts 9 Mail slot .............................. Used for disc insertion/ejection. * Mail slot transport lock ..... Locks the mail slot during transport. ( Magazines .......................... Each magazine has 50 trays accommodating up to 50 discs. ) Drive bays .......................... Accommodation for up to 4 drive units is compatible with this product. The bays are num- bered 1, 2, 3 and 4 from the bottom. ⁄ Carrier ................................ Transports the trays (discs) between the magazines and the mail slot, drive units or printer. ¤ Carrier transport lock ....... Locks the carr

  • MC-8100U 3.1 CD/DVD LIBRARY BLOCK DIAGRAM SECTION 3 DIAGRAMS AND CIRCUIT BOARDS LCD DISPLAY SECTION 10-KEY SW POWER AC 100V - 240V SCSI PCB ASS'Y CD-ROM DRIVE CD-ROM DRIVE MAGAZINE SENSOR PCB No.2 MAGAZINE SENSOR MAGAZINE SENSOR PCB No.1 PRINTER CONNECTOR MAGAZINE SENSOR OPTIONAL DRIVE OPTIONAL DRIVE OPTIONAL LABEL PRINTER MAIL SLOT ASSE

  • JVC MC-8100U, MC-8100U 2.5 Maintenance and Periodical Check The following shows an example of a maintenance reference chart when this unit is used with two drives for 50,000 times a year. Maintenance period differs depending on the using conditions, etc. ^     –––––    ––^ ––  ––^ –– ^ Item Maintenance Contents Maintenance Intervals Grease (See Disassembly view.) Clean filter Clean tray Carrier U/D Motor Unit Mail slot Drives Air filter unit Magazine 1yr 2yrs 3yrs 4yrs 5yrs 6yrs  : Replacement. ^ : Maintenance.  : Operation check. Operation check contents Item Check Contents Carrier U/D motor assemb

  • JVC MC-8100U, SERVICE MANUAL MC-8100U No. 6124 Jan. 2001 COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD. SPECIFICATIONS Printed in Japan MC-8100U MC-8100U No. 6124 CD/DVD LIBRARY R VICTOR COMPANY OF JAPAN, LIMITED is a registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered Trademark in Japan, the U.S.A., the U.K. and many other countries. R R R 100% recycled paper : 100 : 2 : Temperature: 5°C-35°C (41°F-95°F) Humidity: 10%-80% (no condensation) : AC120 V - 240 V : 50 Hz / 60 Hz : 1.4 A - 0.8 A (max. value), 1.1 A -

  • JVC MC-8100U, Symbol No. Part No. Part Name Description Symbol No. Part No. Part Name Description MC-8100U 5.19 DISC SEN T BOARD ASSEMBLY PARTS LIST 19 19`````` R805 QRE141J-391Y CARBON RESISTOR 390 1/4W CN83 QGA2001F1-02 CONNECTOR PD80 GL381 L.E.D. PD80 SC43656-015 LED SPACER 5.21 SENSOR BOARD ASSEMBLY PARTS LIST 21 21`````` C1 QCFB1HZ-473Y CER.CAPACITOR-S 0.047 50V C2 QCFB1HZ-473Y CER.CAPACITOR-S 0.047 50V CN41 QGA2501F1-04 CONNECTOR JVC PT1 PT381F PH TRANSISTOR PT1 SC43656-015 LED SPACER PT2 PT381F PH TRANSISTOR PT2 SC43656-015 LED SPACER Q1 2SC3311A/RS/ SI.TRANSISTO

  • JVC MC-8100U, MC-8100U 1 Demonstration Mode (1) Purpose This mode is used to perform a demonstration of the CD/DVD changer operation. (2) Start While pressing the “ENTER” key and the numeric key “3” simultaneously, turn the power ON. * It is not necessary to set the discs on each tray. (A disc presence check is not performed.) (3) Operation Repetition of crossing operation. Disc Access (MC-8100U: when drives 1 and 2 are connected) •Crossing Operation Count Access Address 0001 “100” → DR1 → “100” 0002 “001” → DR2 → “001” 0003 “099” → Mail slot → “099” 0004 “002” → DR1 → “002” 0005 “098” → DR2 → “098” 0006 “003” → Mail slot �

  • JVC MC-8100U, 5 ENGLISH 1. PRECAUTIONS  Installation and handling precautions (1) Opening the transport lock • Make sure that the transport lock is released and all trans- port protective materials are removed before turning on the power. Failure to do so will result in equipment malfunction. (2) Location of installation • Do not install the equipment near a source of vibration such as motor, engine or loudspeaker. They may adversely affect the equipment performance. • If the equipment is to have a fixed installation, we advise you to give sufficient allowance for space so that extension and replacement of optional units and other operations such as replacemen

  • JVC MC-8100U, 17 ENGLISH 5. DOOR OPENING/CLOSING Once the transport locks have been opened and the power has been turned on for the first time (the optional MC-AP30U label printer may also have been incorporated), the door is locked by the internal safety locking system in addition to locking by the door opening/closing key, so that the door cannot be opened by the key alone. To open the door under these conditions, keep the power on, or turn it on if it had been off, and then perform the following operations before using the door opening/closing key. 1. In the normal display mode, press the MODE key. (The menu display appears.) 2.

  • MC-8100U CD/DVD LIBRARY VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan SS961554-002 © 2000 VICTOR COMPANY OF JAPAN, LIMITED is a registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered Trademark in Japan, the U.S.A., the U.K. and many other countries.

  • JVC MC-8100U, 12 3-3. Removing the optional carrier transport lock screw Setup When the MC-CF10U is installed, its special transport lock should be removed in addition to its being unlocked as detailed in "3- 1. Opening the transport lock" on page 10. Use the following procedure when unlocking the optional carrier transport lock. 1. Remove the transport lock screw (for optional carrier). 2. Insert the removed screw into the designated storage hole for the transport lock screw. • If the system is transported with the MC-CF10U Optional Carrier installed, refer to "3-1. Opening the transport lock", execute the packing mode and clamp the above-mentioned transport lock

  • JVC MC-8100U, 22 Drive Units 7-3. Setting the SCSI ID numbers, etc. 1. Connect the control cable (14P). • Connect the cable with the corresponding number to the drive bay No. If the cable with the wrong number is connected, it will lead to the equipment mal- functioning. s Procedure for the setting the SCSI ID Nos. and other jumpers, please refer to the specified section(s) of the corresponding drive instruction manuals. s Make sure to turn the power OFF before starting with the setting procedure. If the proced

  • JVC MC-8100U, MC-8100U 2-19 2.4 Maintenance Mode 2.4.1 Outline This unit is also equipped with an RS-232C port as an interface for external equipment other than the SCSI interface which is used for connection to the host computer. The RS-232C port is used mainly for the following two purposes: (a) Remote Maintenance: It can be used for remote diagnostic operation by connect- ing to the public telephone line via a modem. (b) Direct Maintenance: It can be used for diagnostic operation by direct connection to a computer, etc. In either way, while this unit is operated in the system the me- chanica

  • 15 ENGLISH Control Panel Operations and LCD Display 4-3. Event display 1 Power on POWER ON 2 During initialization INITIALIZING 3 Error occurrence ( a See “10-2. Error code list” on page 28.) Displayed alternately. D ISC=024 CODE =CU 04 E RROR OCCURRED ! 4 During door opening ( a See “5. Door Opening/Closing” on page 17.) E XECUT I NG DOOR OPEN PROCESS THE DOOR CAN BE OPENED 5 When d

  • JVC MC-8100U, 14 Carrier Drive 1 Idle Mail slot Drive 2 Disc No. Drive 3 Unconnected Drive 4 [Pattern 1] [Pattern 2] CR : – – – MS : – – – D1 : 0 3 6 D2 : 0 7 5 D3 : NC D4 : NC SELECT SELECT 4. CONTROL PANEL OPERATIONS AND LCD DISPLAY The key operation and LCD display system has three main operation and display modes as described below. Normal display ..... This mode includes two patterns, one of which is displayed automatically when the equipment starts up normally. The disc numbers in the drive units

  • JVC MC-8100U, MC-8100U 6-1 SECTION 6 PACKING 6.1 PACKING ASSEMBLY M7  Factory setting Software setting SCSI-ID of main unit 0 Error history Clear 1 SS23037-001 PACKING CASE 2 SS35480 PACKING LABEL 3 SS35764-001 ROLL LBL SHEET 4 SS23039-001 CUSHION(T) 5 SS35453-006 POLY COVER 6 SS23041-001 CUSHION(R) ! 7 QMP1C08-250 POWER CORD 8 QMPL018-250-R POWER CORD 9 SS23040-001 CUSHION(F) 10 SS35970-001 CUSHION(S) 11 SS23013-001 BOTTOM CASE 12 SSV3282-001 JOINT 13 QPA02503505 POLY BAG 14 SS961554-002 INSTRUCTION 15 SS47919-00B KEY ASSEMBLY 16 QPA00500705 POLY BAG 17 PRD30413-01-04 AIR CAP BAG 18 QQR0675-001 CLAMP F

Related Products and Documents (Storage):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 REVELL Concorde "Britsh Airways" Assembly manual revell/concorde-britsh-airways-7W9.pdf 15 Jun 2023 12 4.99 Mb
2 Nextar W3G - W3G LCD Color Touch Screen Portable GPS/MP3 Manual  nextar/w3g-w3g-lcd-color-touch-screen-portable-gps-mp3-KQG.pdf 15 Oct 2023 40
3 Daisy Rock Stardust Elite Bass Brochure daisy-rock/stardust-elite-bass-2W6.pdf 25 Nov 2022 17 9.94 Mb
4 AvMap Geosat 4 ALL Operation & user’s manual avmap/geosat-4-all-G4S.pdf 06 Feb 2023 60 3.35 Mb
5 LENCO MDV-3 Specifications lenco/mdv-3-HO7.pdf 16 Jun 2023 1
6 Radio Shack 63-5086 Owner's manual radio-shack/63-5086-L2J.pdf 09 Aug 2022 2 0.1 Mb

Similar Resources:

  • J.Burrows

    JBIR41410B

    (13 pages)
    Quality Assurance Guide ASSEMBLY INSTRUCTIONS 4 SHELF INDUSTRIAL RACKING JBIR41410B For spare parts or hardware call 1300 OFFICE This design and instruction booklet is subject to copyright. www.officeworks.com.au 1 Carton1/ 13 …
  • Sony

    LIB-81

    (44 pages)
    4-663-200-13(1)AIT Library© 2006 Sony CorporationLIB-81クイックスタートガイド Page 4 _____________________________JPQuick Start Guide Page 10 _________________________________GBPage 16 ____________________________________CSPage 21 ____________________________________CTMode d’emploi Page 26 ____________________________________FRGebrauchsanweisun …
  • SimpleTech

    FS-U25/120E

    (2 pages)
    Introducing the Signature Mini family of bite-size drives, bursting with tasty ingredients. Supple and resilient to the touch, with a positive velvety grip, they’re designed by our friends at Pininfarina, the icon of Italian sports car design since 1930.Just plug one in, and inside you’ll fi nd smart ways to protect and manage all your precious stuff. I …
  • Lexar

    JumpDrive

    (2 pages)
    FRONTBACKMinimum System Requirements• Windows 98SE/2000/Me/XP• Mac OS X, Mac OS 8.6 or higher• One available USB port• Internet connection for Windows 98JumpDrive™Quick Start GuideGuide de démarrage rapideKurzanleitungenInstallation NotesWindows 2000/Me/XP and Mac 8.6 or HigherNo driver installation required. Plug the JumpDrive into the USB port …
  • HP

    StorageWorks 8000 - NAS

    (58 pages)
    HP Surestore NAS 8000 High Availability Solution Integration Manual (SIM) 1HP Surestore NAS 8000 High Availability Solution Integration Manual (SIM)Read Me FirstThis binder includes the details of the integration tasks that Hewlett-Packard or an authorized reseller has performed. The first section, Solution Integration and Product Configuration Overview, is …
  • ADIC

    SNC 6101

    (4 pages)
    Release Notes6-01237-04 Rev A© March 2006, ADIC®ADIC is a registered trademark of Advanced Digital Information Corporation. All other product, company, or service names mentioned herein are the property of their respective owners. Product: SNC 6101® Firmware 4.60.04Date: March 2006ContentsPurpose of this ReleaseThis release extends the capabilities of SNC …

Comments, Questions and Opinions: