Cisco Telepresence MX200 Operation & User’s Manual
|
51 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Camera Move the Selfview PiP The Selfview shows what others see from your video system. You will normally use it to conrm that they see what you want them to se
55 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Settings Ringtone & Sound The Ringtone & Sound Settings window lets you specify: • Keytones On or O. When set to on you will hear a sound eve
Cisco Telepresence MX200, 59 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. The Language page lets you specify the Touch interface menu language. Settings Select Language About Language Setting
45 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Add Camera Position Preset Tap Camera, as outlined, to invoke the camera adjustment menu. Adjust Tilt, Pan and Zoom, as required. Tap Selfview to act
Cisco Telepresence MX200, 13 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Receive Call • If someone calls you, you may accept, decline or ignore the call. • If you decline the call, busy information will be sent to the calling party. • If you ignore the call, the calling party will perceive this as if you were absent (you did not pick up the call. • You may want to set your system to respond automat
Cisco Telepresence MX200, Cisco has more than 200 oces worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco Website at www.cisco.com/go/oces. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its aliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R) Americas Headquarters Cisco Systems, Inc. San Jose, CA Asia Pacic Headquart ers Cisco Systems (USA) Pte. Ltd. Singapore Euro
Cisco Telepresence MX200, 7 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Video Calls
Cisco Telepresence MX200, 69 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. There are basically two modes of video conferencing; viz. MultiWay and MultiSite. • To enable MultiWay, a MultiWay address must have been entered. • If a MultiWay address has been specied and MultiWay is selected, MultiWay will always be used for video conferencing. • If a MultiWay address has been speci
Cisco Telepresence MX200, 49 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. The Selfview shows what others see from your video system. You will normally use it to conrm that they see what you want them to see. The Selfview appears as a PiP (Picture-in-Picture). The position of Selfview PiP can be changed if you wish—see “Move the Selfview PiP” on page 51 for details on this. Camera Manage Selfview About Selfview Tap Camera, as outlined. Tap Selfview to turn
71 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. You may specify whether to use IPv4 or IPv6 and whether to use static IP address or DHCP. When set to Static, applicable addresses must be set according
Cisco Telepresence MX200, 29 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Any participant entitled to it may disconnect any of the other participants. Tap the participant, either in the view as shown, or in the list of participants (see “View Meeting Participant List” on page 26). Then tap Drop, as outlined. About Disconnect Conference Calls with Multiple Participants Disconnect Participant from Call Tap the participant to be disconnected, as outlined. You mu
Cisco Telepresence MX200, 11 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. About Placing Calls Tap Dial, as outlined, to invoke the numerical dialpad. Type the IP address. Tap and hold * to type the point sign used in IP- addresses. When you are ready to place the call, tap the green Call button. Place Call Using an IP Address You may call someone who is not listed in your list of contacts by keying in their name, address or number using the virtual keyboard of the Touch pad. Anyone you have previously cal
Cisco Telepresence MX200, 12 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Tap Dial, as outlined, to invoke the numerical dialpad. Place Call Using Number About Placing Calls You may call someone who is not listed in your list of contacts by keying in their name, address or number using the virtual keyboard of the Touch pad. Anyone you have previously called will appear in the Recents list (unti
Cisco Telepresence MX200, 47 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Camera Control Own Camera Existing camera presets can be used right away during a call. Your video system may have more than one camera, for example one camera showing the participants, while another shows the whiteboard. If you need to add new or modify existing camera presets, this is done in t
Cisco Telepresence MX200, 75 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Use this page to set up SIP. Caution! There is no Cancel function letting you exit the menu undoing any changes you have made. Take care! Settings Administrator Settings—SIP About SIP Settings To exit Administrator Settings, tap Back. To exit Settings as such, tap Exit. Note that there is no Cancel function letting you exit the menu
Cisco Telepresence MX200, 38 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Contacts Contacts consists of three parts; a Directory, which typically is your corporate phone book; Recents which is a list of recent calls and nally Favorites, which is your personalized list of people you call frequently or otherwise need to get easy access to.
43 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Camera The video system camera can be controlled at all times during a video meeting. It can even be controlled by the far end to make sure the far end get the best
Cisco Telepresence MX200, 28 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Conference Calls with Multiple Participants Lock Speaker Start with a layout showing one the participants as the prominent speaker, and tap that speaker’s avatar. Tap Lock as speaker, as outlined. Once activated the name of this eld will change to Unlock as speaker. To unlock, repeat the process tapping Unlock as Speaker instead. This is an example of a layout w
Cisco Telepresence MX200, 52 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Camera Control the Camera of the Other Participant Within video conferencing the term far end is often used to refer to the one you are talking to. Likewise, the term near end is often used to refer to your side of the video meeting. The ability to control the far end camera requires that the far end system camera is remotely control
Cisco Telepresence MX200, 3 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Introduction to Video Conferencing i
Cisco Telepresence MX200, 1 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. User Guide Cisco TelePresence Prole Series Codec C-series Quick Set C20 SX20 Quick Set MX200 MX300 T C 7.3
Cisco Telepresence MX200, 22 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Availability Enable Standby Your system can be set to Standby to save electrical energy. You will still be able to receive calls as usual. About Standby The screen will turn itself o after a few seconds. Tap the screen to wake it up. Tap the eld in the upper left corner, as outl
Cisco Telepresence MX200, 23 D1458221 User Guide Cisco TelePresence Prole Series, Codec C-series, Quick Set C20 SX20 Quick Set, MX200, MX300 Produced: December 2014 for TC7.3 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved. Add Extension Numbers and Pin Codes View Keypad While in a Call In a call you may get prompted to submit numbers to be able to reach an extension or otherwise gain entrance to something (for example by means of a PIN-code). To be able to submit this you will need to invoke the keypad on th
Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Conference System Administration manual
CTS 1000 - TelePresence System 1000 Video Conferencing |
Cisco TelePresence System Codec C20 Conference System Administrator's manual
TelePresence System Codec C20 |
Cisco TelePresence DX70 Conference System Quick reference manual
TelePresence DX70 |
Cisco TelePresence System Codec C20 Conference System Administrator's manual
TelePresence System Codec C20 |
Cisco Catalyst Express 500 Conference System Getting started manual
Catalyst Express 500 |
Cisco MX200 G2 Conference System Operation & user’s manual
MX200 G2 |
Cisco TelePresence IX5000 Conference System Installation manual
TelePresence IX5000 |
Cisco TelePresence SX20 Conference System Administrator's manual
TelePresence SX20 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Delta Electronics | Network Device TDV | Specification | delta-electronics/network-device-tdv-29E.pdf | 05 May 2023 | 1 | 0.14 Mb |
2 | Morphy Richards | BRITA WATER FILTER KETTLE | Hints and tips manual | morphy-richards/brita-water-filter-kettle-1TO.pdf | 27 Aug 2023 | 6 | |
3 | LG | 55GA7900 | Specification | lg/55ga7900-K7D.pdf | 28 Feb 2024 | 2 | |
4 | Sony | SRF-M90 | Operating instructions | sony/srf-m90-E3V.pdf | 15 Feb 2023 | 2 | 0.13 Mb |
5 | Xerox | 5500DT - Phaser B/W Laser Printer | Evaluator manual | xerox/5500dt-phaser-b-w-laser-printer-HQ5.pdf | 02 Feb 2024 | 13 | 0.4 Mb |
6 | Kenmore | 216.31701 | Owner's manual | kenmore/216-31701-G6C.pdf | 18 Mar 2024 | 17 |
Tekelec
Tekelec EAGLE® 5Feature Manual - IDP-Related Features910-6023-001 Revision AMarch 2011Copyright 2011 Tekelec. All Rights Reserved. Printed in USA.Legal Information can be accessed from the Main Menu of the optical disc or on theTekelec Customer Support web site in the Legal Information folder of the Product Support tab.
…
EAGLE 5(154 pages) |
Polycom
* SoundStation VTX 1000 integration not available in all countries. Contact your Polycom representative for availability. Audio G.722.1 Annex C (based on Polycom Siren™ 14) • 14 kHz crystal clear, wideband audio, while only using 24-48 Kbps of bandwidth, depending on the data rate of the call • Eliminates fatigue associated with …
VSX7000e(5 pages) |
Crestron
The UC-MM30-TA and UC-MM30-TA-I Crestron Flex tabletop conferencesystems provide small room audio conference solutions for use with theMicrosoft Teams® Rooms intelligent communications platform. Theyfeature a Crestron Flex tabletop conference device.Minimum Requirementsl A Microsoft Teams or Skype® for Business software accountl An environment running Micr …
UC-MM30-TA(3 pages) |
iPECS
iPECS eMG80 System DECT Installation Guide Please read this manual carefully before operating System. Retain it for future reference.
…
eMG80(45 pages) |
Beyerdynamic
Auswahl der AntennenOptionen:Rod Antenna (CA Q 11)Omni (CA Q 14)Planar (CA Q 13)Auswahl des Antennenkabels**Dieser Menüpunkt wird übersprungen, wenn unter„Auswahl der Antennen“ der Punkt „Rod Antenna (CA Q 11)“ ausgewählt wurde.Optionen:10m / 33ft (CA Q 31)20m / 66ft (CA Q 32)Warnhinweis vor Beendigung der Eingaben„Cancel“ = startet den Eingab …
Quinta CU(2 pages) |
Vokkero
VOKKEROADEUNIS-RF 283 rue Louis Néel - Parc Technologique Pré Roux 38920 CROLLES - FranceTel. : +33 (0)4 76 92 07 77 - Fax : +33 (0)4 76 04 80 87 www.vokkero.com [email protected] GUARDIAN EUROPEMode d'emploi / Technical and regulatory informationVersion 1.0.0210191AAudio ProBorsteler Chaussee 49 | 22453 Hamburg | Tel.: (040) …
GUARDIAN EUROPE Audio Pro(80 pages) |
REVELL Toy French Carrier CLEMENCEAU/FOCHREVELL French Carrier CLEMENCEAU/FOCH User Manual (Assembly instructions manual), @7TC44G French Carrier CLEMENCEAU/FOCH, 7 |
Philips Monitor 232E2SBPDF Guide (@L82677), Philips 232E2SB Monitor (Mon 11.2023) 232E2SB, 3 |
MTD Lawn Mower Accessories 190-116MTD 190-116 Lawn Mower Accessories Operator's manual 190-116, 8 |
Ericsson Telephone R250SEricsson Product Guide: R250S PDF Operation & user’s manual - OLWY3W R250S, 133 |
Technics Amplifier SECH-515-ATechnics Amplifier SECH-515-A Service manual SECH-515-A, 25 |
Fyrnetics Smoke Alarm PE9Operation & user’s manual for Fyrnetics PE9 Smoke Alarm PE9, 6 |
Sony Speakers SA-NA9ESManual: Sony SA-NA9ES (547DED, Upd.Saturday 06-01-2024) SA-NA9ES, 2 |
American Standard Plumbing Product Copeland 7005.201Plumbing Product PDF Installation instructions manual Copeland 7005.201, 8 |
Weber Grill GENESIS 56733GENESIS 56733 Assembly manual - PR493B GENESIS 56733, 36 |
Samsung Printer 3561ND - B/W Laser Printer3561ND - B/W Laser Printer Manual del usuario - Z2WF1T 3561ND - B/W Laser Printer, 127 |
Blodgett Oven 1200Oven #5UTK63 1200, 16 |
Siegenia Control Unit DRIVE axxent DKControl Unit Assembly instructions manual (Siegenia DRIVE axxent DK) DRIVE axxent DK, 12 |