Manualios.com

Sharp MD-M3H Operation Manual

Sharp MD-M3H Manual Online:

4.55, 869 votes
Sharp MD-M3H User Manual
Sharp MD-M3H User Guide
Sharp MD-M3H Online Manual

Text of Sharp MD-M3H User Guide:

  • Sharp MD-M3H, 14 ■ APMS (Automatic Programmable Music Selector) 1 Select the desired programme source, CD or MD, by pressing the CD or MD button. 2 Press the MEMORY button. MEMORY MEMORY REC 3 Press the 5 3 or 2 4 button. MEMORY REC Selected track number 4 Press the ENTER button. MEMORY Playback order 5 Repeat steps 3 and 4 for any other tracks up to 20 tracks (P-20) can be programmed. 6 Press the ■ button. MEMORY Total playing time MEMORY ● The total playing time of the programmed tracks will be automatically displayed. 7 Press the 0 6 button to start playback of the programmed selections. ● After all of the programmed tracks have finished playback, the unit will automatically stop. (Contin

  • Sharp MD-M3H, 10 SOUND CONTROL ■ Volume (Main unit operation) When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clock- wise, the volume will decrease. (Remote control operation) Press the VOLUME button to increase the volume and the VOLUME button to decrease the volume. ■ Pre-programmed equalizer FLAT VOCALSOFT HEAVY (Main unit) (Remote control) (Remote control) (Main unit) X-BASS SURROUND SURROUND (Remote control) (Main unit) RDS DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN E

  • Sharp MD-M3H, 46 (Continued) Symptom ● A recording cannot be made. ● Even though a disc has been loaded, “MD NO DISC” or “READ ERR” is displayed. ● Playback sounds are skipped. Possible cause ● Is the MiniDisc protected against accidental erasure? ● Did you try to make recording on a play-back only MiniDisc? ● Can you see the “DISC FULL” or “TOC FULL ” message in the dis- play? ● ( :number or symbol) ● The disc is very dirty. ● Is the unit located near excessive vibrations? ● H

  • Sharp MD-M3H, 7 (Continued) ■ Removing the speaker grilles ■ Connecting the AC power lead Connect the AC power lead to the AC INPUT socket, then connect the AC power lead plug to an AC socket. Notes: ● Unplug the AC power lead from the AC socket if the unit will not be in use for a prolonged period of time. ● Never use a power lead other than the one sup- plied. Use of a power lead other than the one supplied may cause an electric shock or fire. ■ Demo mode 10 cm (4") 10 cm (4") 20 cm (8") 10 cm (4") DEMO ON OFF To an AC socket To AC INPUT AC 230 V, 50 Hz AC INPUT When the AC power le

  • Sharp MD-M3H, 47 When an error message is displayed, proceed as follows: Error messages BLANK MD CAN’T EDIT CAN’T REC CD NO DISC DISC FULL FOCUS ERR MD ERR MD NO DISC MECHA ERR* (*:Number or symbol) NAME FULL NOT AUDIO PLAYBACK MD PROTECTED READ ERR TEMP OVER TOC ERR* (*:Number or symbol) TOC FULL* (*:Number or symbol) TOC W ERR U TOC ERR* (*:S ymbol ) U TOC ERR W ? DISC 00:00 Remedy ● Replace it with another disc. ● Change the stop position of the track and then try editing it. ● Re-record or replace the MiniDisc. ● Replace it with another disc. ● Load a CD. ● Reload the CD. ● Replace the disc with another recordable disc. �

  • Sharp MD-M3H, TERMS OF GUARANTEE Sharp Electronics (UK) Ltd. ("Sharp") guarantees to provide for the repair, or at its option the replace- ment, of this product subject to the conditions listed below:- 1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by Sharp. 2. As this product is intended for private domestic use only, the guarantee will not apply if the product is used in

  • Sharp MD-M3H, 27 (Continued) In the following cases, the EON stand-by mode will be cancelled. ● Press the ON/STAND-BY button to enter the stand-by mode. ● When the unit is switched to another band in the EON stand-by mode ● When you change the FM station whilst in the EON stand-by mode ● When a preset call is made Notes: ● During the same programme as the specified PTY (or TA) is being broadcast on the station you are receiving, the unit will not switch to other network station. ● If there are more than two other network stations you want to listen to, compare the strength of each station's signal and tune in the station with the strong

  • Sharp MD-M3H, 12 MINIDISC OPERATION ■ MD playback 2 1 4 7 4 H 1 2 H 3 DISC MEMORY RANDOM TOTAL REMAIN RECkHz MHz SLEEP Disc name 1 Press the ON/STAND-BY button to turn the power on. 2 Press the MD button. 3 Load a MiniDisc in the direction indicated by the arrow on the MiniDisc, with the labeled side fac- ing up. ● The total number of tracks and the total playing time on the MiniDisc will be displayed. 4 Press the 0 6 button. ● If the MD has a track name, the name will ap- pear and scroll across the display. Then, the elapsed playing time will appear. ● If the MD has no track names, the elapsed play- ing time will appear. ● When th

  • Sharp MD-M3H, 6 PREPARATION FOR USE ■ Aerial connection ■ Speaker connection ● Unplug the AC power lead from the AC socket before connecting or disconnecting any com- ponent. Connect each speaker wire to the SPEAKER ter- minals as shown. Use speakers with an impedance of 4 ohms or more, as lower impedance speakers can damage the unit. Caution: ● Before connecting the speakers to the unit, con- nect the speaker wires to the speakers first. Then, connect the speaker wire to the terminals on the unit. ● Connect the s

  • Sharp MD-M3H, 40 ■ Timer recording Before timer recording, the following preparations are required. ● Load a CD, a recordable MD. ● Preset the radio station. ● Before setting the timer, make sure that the clock setting is correct. (Page 9) 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD, TUNER(BAND), AUX button to select desired function. 3 Press the TIMER button to select the timer recording mode. 4 During “f REC” is flashing, press the ENTER button. DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN REC SLEEP REC REC 5 Within 5 seconds, press the or button to set the hour to start, and then press the ENTER button. DISC TOC TRACK MEMORY RANDOM TOTAL REM

  • Sharp MD-M3H, 31 3 2 3 4 4 H H 5 5 ■ Recording from the built-in radio onto a MiniDisc 1 Tune in to the desired station. (pages 16 - 17.) 2 Load a recordable MiniDisc. 3 Press the ● REC button. ● The unit will enter the recording stand-by mode. 4 Check the recordable time by pressing the DIS- PLAY button. Note: ● Before recording an AM broadcast, enter the recording stand-by mode, and then separate the AM loop aerial from the main unit. Adjust it so that the AM broadcast can be tuned in most clearly. ● During r

  • Sharp MD-M3H, 13 06 2 4 5 3 5 3 2 4 06 CONVENIENT CD AND MD OPERATION ■ APSS (Auto Program Search Sys- tem) APSS automatically locates the beginning of any track. ■ Repeat and random play 1 Select the desired programme source, CD or MD button. 2 Press the P-MODE button. ● Each time this button is pressed, the mode will change in the following order: Repeat indicator Random indicator Disappears 3 Press the 0 6 button to start playback. Repeat play After the last track has been played, playback will return to the first track and begin a

  • Sharp MD-M3H, 15 DISPLAY DISPLAY ■ Switching the time display Each time the TIME button is pressed during play- back or when in the pause mode, thd∫ ispla y will change. TIME (Remote control operation) The elapsed playing time for current track will be displayed. REC No display The remaining playing time for the current track will be displayed. REMAIN REC REMAIN The total remaining playing time for the disc from the point being played at that time will be displayed. TOTAL REMAIN REC TOTAL REMAIN Notes: ● During random play, the total remaining playing time cannot be displayed. ● Depending on a CD or MD to be played, the play- ing time display may not match the total playing time which is in

  • Sharp MD-M3H, 2 AM loop aerial × 1 ■ General ● Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10cm (4") of free space along the sides and back. There must also be a minimum of 20cm (8") of free space on the top of the unit. ● Do not use oil, solvents, petrol, paint thinners or insecticides on the unit. ● Do not expose the unit to moisture, to tempera- tures higher than 60°C (140°F) or to extreme low temperatures. ● Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electroni

  • MD MICRO SYSTEM OPERATION MANUAL MODEL MD-M3H Page SPECIAL NOTES .............................................. 1 ACCESSORIES ................................................. 2 PRECAUTIONS ................................................. 2 NAMES OF CONTROLS AND INDICATORS .... 3-5 PREPARATION FOR USE.............................. 6-8 SETTING THE CLOCK ..............

  • Sharp MD-M3H, 30 ■ APMS recording CD0MD EDIT (HIGH /NORMAL) H 4 1 H 1 3 4 2 2 3 H 1 Select tracks for APMS playback. (Page 14) 2 Load a recordable MiniDisc. 3 Press the CD 0 MD EDIT (HIGH or NORMAL) button. ● APMS playback will start, and recording will start automatically. ● Programmed tracks will be recorded in order. After the unit has finished recording the last track, recording will stop automatically. Notes: ● If recording does not begin, press the CD 0 MD EDIT (HIGH or NORMAL) button again. (See page 29.) ● When repeat play has been set, if you press the

  • Sharp MD-M3H, 37 ■ Move 4 Select the new track position pressing the or button. ● To cancel the operation, press the ■ button. 5 Press the ENTER button again. ● The track is moved, and the unit is stopped at the beginning of the new track which has the same track number as selected number in step 1. Note: ● When a track has been moved, the other tracks which are affected will be assigned new track numbers automatically. Example: When moving the fifth track to the third track, the old third track will become the new fourth track, and the old fourth track will become the new fifth trac

  • Sharp MD-M3H, 38 ■ Erase To erase all of the tracks at once: 1 Press the ■ button. ● The total number of tracks and the total playing time on an MD will appear. 2 Press the NAME/TOC EDIT button, and within 10 seconds, select “ALL ERASE” pressing the or button. 3 Within 10 seconds, press the ENTER button. ● To cancel the operation, press the ■ button. 4 Press the ENTER button again. ● All of the track numbers and track names will be erased. Note: ● This function cannot be used in the random play mode and AP

  • 44 The disc is stored in a cartridge. You can handle it easily without worrying about dust, fingerprints, etc. However, dust entering the opening of the cartridge, dirt on the cartridge, warping, etc. may cause malfunctions. Please note the following. ■ Handling the MiniDisc Do not touch the disc directly! Do not open the shutter or touch the disc directly. If the shutter is opened fo

  • Sharp MD-M3H, 11 COMPACT DISC OPERATION ■ CD playback DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN RECkHz MHz SLEEP Total number of tracks Total playing time TOTAL Flash 2 1 6 6 1 2 H H PUSU CLOSE 3 45 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Press the 7 CD EJECT button to open the CD compartment. 4 Place the CD on the spindle, label side up. 5 Close the CD compartment by firmy pushing the corner marked "PUSH CLOSE". ● The total number of tracks and the total playing time will be displayed. 6 Press

  • 49 SPECIFICATIONS As part of our policy of continuous improvement, SHARP reserves the right to make design and speci- fication changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. ● General Power source: AC 230 V, 50 Hz Power consumption:

  • 20 (Continued) ■ ASPM (Auto Station Program Memory) It is recommended that you store stations in memory using ASPM. (This memory can be used for PTY searches, sta- tion select and EON switching.) When the ASPM button is pressed, whilst tuned to the FM band, the RDS (Radio Data System) func- tion will automatically search for new RDS stations. Up to 40 stations can be stored in me

  • Sharp MD-M3H, 1 NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non- rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut-off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediatel

  • Sharp MD-M3H, 34 1 During playback or in the pause mode, press the NAME/TOC EDIT button. REC SLEEP 2 Within 10 seconds, press the ENTER button. TRACK REC SLEEP TRACK ● The unit will enter the character input mode. ● The track you are listening to will be played repeatedly. 3 Press the DISPLAY button to select the type of characters. 4 Select the character you want pressing the or button. REC SLEEP ■ To create a track name Name each track. A track’s name will be displayed whenever you select it and during playback. NAME/ TOC EDIT CLEAR ENTER DISPLAY / (Remote control operation) 5 Press the ENTER button to enter the character. REC SLEEP ● Repeat steps 3 to 5 above to enter the charac- ters in

  • 42 ■ Connecting external units Before connecting external units, set this unit to the stand-by mode and turn off the power to the external units. Connecting to stereos or MD/CD players (equipment which can output analogue signals) The other MD/CD player Commercially available lead with 3.5 mm (1/8") stereo mini-plug and RCA plugs To the output / headphone socket RIGHT LEFT To the analogue

Related Products and Documents (Garage Door Opener):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Lenovo THINKPAD X30 Troubleshooting manual lenovo/thinkpad-x30-AIZ.pdf 19 Aug 2022 96
2 Denon AVR-1713 Specifications denon/avr-1713-1I6.pdf 23 Feb 2023 2
3 VTech i5857 Manual del usuario vtech/i5857-SZK.pdf 12 Feb 2024 56 3.12 Mb
4 EuroLite LED ACS BAR-12 Operation & user’s manual eurolite/led-acs-bar-12-MK3.pdf 28 Aug 2023 22
5 Philips HD7522/16 Operation & user’s manual philips/hd7522-16-Q87.pdf 03 Jan 2023 2 3.43 Mb
6 HT HT21 Operation & user’s manual ht/ht21-2W7.pdf 07 May 2023 17

Similar Resources:

  • Chamberlain

    8200C

    (80 pages)
    GARAGE DOOR OPENERSeries 8200C1/2 HPFor Residential Use Only ®Owner’s Manual■ Please read this manual and the enclosed safety materials carefully!■ Fasten the manual near the garage door after installation.■ The door WILL NOT CLOSE unless the Protector System®is connected andproperly aligned.■ Periodic checks of the opener are required to ensure …
  • Toa

    H-1

    (12 pages)
    OPERATING INSTRUCTIONSH-1SPEAKER SYSTEMPlease follow the instructions in this manual to obtain the optimum results from this unit.We also recommend that you keep this manual handy for future reference.TABLE OF CONTENTS1. SAFETY PRECAUTIONS2. GENERAL DESCRIPTION3. FEATURES4. HANDLING PRECAUTIONS5. NOMENCLATURE6. INSTALLATION6.1. Direct Wall/Ceiling Mou …
  • Craftsman

    CMXEOCG781

    (100 pages)
    Owner's ManualSMART GARAGE DOOR OPENERFor Residential Use OnlyMODEL CMXEOCG781READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE FIRST USE OF THIS PRODUCT.FASTEN THE MANUAL NEAR THE GARAGE DOOR AFTER INSTALLATION.PERIODIC CHECKS OF THE OPENER ARE REQUIRED TO ENSURE SAFE OPERATION.DO NOT INSTALL ON A ONE-PIECE DOOR IF USING DEVICES OR FEA …
  • Gate Motors

    Blank

    (4 pages)
    13_2008 PRODOTTIPRODUITSPRODUCTSERZEUGNISPRODUCTOSManuale d’Installazione e d’UsoManuel d'Installation et UtilisationInstallation and use manualHandbuch der Installation und des GebrauchsManual de Uso e InstalaciónAUTOMAZIONI PER CANCELLI A BATTENTE AUTOMATISMES POUR PORTAILS A BATTANTSAUTOMATION FOR SWING GATES AUTOMATISIERUNG FÜR FLÜGELT …
  • B&D

    Panelift B&D Storm-Shield PFI

    (32 pages)
    Part No. OT2515. Revision 9 - March 2016DISCLAIMERTHESE INSTRUCTIONS ARE INTENDED FOR PROFESSIONAL GARAGE DOOR INSTALLERSNote: All references are taken from inside looking out.Substrate fasteners are not included, the recommended fasteners and high wind compliant Storm-Shield fasteners can be downloaded from the installation section on the B&D website …
  • SOMFY

    ROLLIXO RTS

    (44 pages)
    EN User’s manualPL,QVWUXNFMDREVáXJLESManual de usoELǼȖȤİȚȡȓįȚȠȤȡȒıȘȢROLLIXO RTS3 421ProgSTOP5108207CFR0DQXHOG¶XWLOLVDWLRQDE %HGLHQXQJVDQOHLWXQJIT Manuale d’usoNL *HEUXLNVKDQGOHLGLQJ …

Comments, Questions and Opinions: