Manualios.com

Wingsland Minivet Operation & User’s Manual

Wingsland Minivet Manual Online:

4.8, 1595 votes
Wingsland Minivet User Manual
Wingsland Minivet User Guide
Wingsland Minivet Online Manual

Text of Wingsland Minivet User Guide:

  • Wingsland Minivet, Support & Service INTRODUCTION Thank you for your purchasing Wingsland Minivet multi-rotor aircraft, you hereby agree with and accept the terms of this disclaimer and is believed that you have read it thoroughly. If you have any questions or concerns during your operating, please don’t hesitate to contact Wingsland Customer service or Wingsland authorized dealer by email or telephone. Wingsland Customer Service The possibility of serious injury to the user is small, but there is a danger of injury, or physical damage, if not carried out properly. CAUTION WARNING DANGEROUS 1 Incorrect

  • Wingsland Minivet, Instructions & Cautions Disclaimer & Warning 1. Ensure using with genuine Wingsland accessories to get most efficiently flight experience. 2. Please uninstall all propellers before your calibration on parameters setting. 3. Ensure that you are familiar with your local laws, administrative rules and social habits and agree that you are solely responsible for your own conduct and content while you flying. 4. Ensure to check all connections (Check the propellers and motors are installed properly and firmly) and every part of product is in normal conditio

  • Wingsland Minivet, Limitation of Liability Battery Usage Notes Wingsland accept no liability for damage(s), injuries or any legal responsibilities incurred directly or indirectly from the use of this product in the following conditions and this limitation of liability applies to Wingsland suppliers, dealers and service providers: 1. Any more paid in amount for this product than the actual purchase price. 2. Any costs and expenses with access to alternative goods, services or rights. 3. Costs, expenses increased, loss caused by the data loss, data corruption or data interruption. 4. Any loss caused by the violation of the provisions of local laws and regulations or th

  • Wingsland Minivet, 2 4 Copyright@2015 WINGSLAND All Right Reserved 1 Product Profile 1-1 Aircraft Assembly 1-2 Components of Aircraft 1-3 Components of Remote Controller Aircraft 2-1 Aircraft Status Indicator 2-2 Flight Mode 2-3 Intelligent Flight Battery 3 Remoter Controller 3-1 Install Battery 3-2 Remote Controller Operation 3-3 Display Screen 4 Gimbal and Camera Introduction 4-1 Gimbal and Camera operation 4-2 Camera Setting 5-1 Flight Notes 5-2 Check and Calibrate the Compass 5-3 Flight Operation 5 Flight and Camera Introduction 6 GCS Assistant Software Operation 6-1 GCS Assistant Software Download and Upgrade Operation 6-2 Setting and Using GCS As

  • Wingsland Minivet, 1-1Aircraft Assembly Spin Propellers and Screw Nuts in the direction with consistence of arrow direction marked on the aircraft arms (Figure 2).Spin and Fasten Screw Nuts with Assistant Wrench (Figure 1). Screw Nuts Assistant Wrench Install Propellers Attaching the propellers according to the correct direction Install the Display Screen and Bracket onto the Remote Controller Handle through fastening Screen Lock-Screw. (Figure 3). Warning Ensure that all propellers are installed correctly before every flight. Warn

  • Wingsland Minivet, 1. Aircraft 2. Orange LED Indicator 3. Landing Gear 4. Integrated Camera 5. Vibration Absorber Sponge 6. Propeller Lock Screw 7. Propeller 8. Motor 9. GPS Status Indicator 10. Power Button 11. Battery Level Indicator 12. Image Transmitter 13. 3-Axis Gimbal 14. Green LED Indicator 15. Intelligent Flight Battery 16. Gimbal Assistant port 1. Display Screen 2. Antenna 3. Handle 4. Switch L2 5. Switch R2 6. Switch L1 7. Switch R1 8. Neck Strap Attachment 9. Left Stick 10. Right Stick 11. Trimming Button W1-W4 12. Power Indicator

  • Wingsland Minivet, Solid Orange + Solid Green + Solid Blue GPS Initialization completed (GPS satellites number ≥5) GPS Stabilized Smooth Mode is available (1) Standard Ready to Fly Mode (L1 to the middle position, L2 to the middle position) Use barometric altimeter and GPS module to lock the aircraft in a stable hover. Based on the GPS satellites signal, there are two types: Stabilized Smooth GPS Mode (GPS satellites number ≥5): the aircraft will keep position and altitude. Normal Stabilized Mode (GPS satellites number<5): keep the aircraft height position and stabilized except for horizontal position. Warning Beginners do not try Manual Operation Mode.

  • (7) Failsafe Mode (Signal Losing) When the aircraft fail to receive a signal from the Remote Controller, the aircraft will enter in Failsafe Mode. The Aircraft will automatically return will automatically control the aircraft to return to recorded home point. The home point will be set to the location from which the aircraft was launched and finished GPS initialization (GPS sat

  • Wingsland Minivet, 9 The battery life will be shortened in fully storage status. Please use following method to discharge the battery to low level if it will not be used for a long time. Fly in an open field and keep hovering state, landing the aircraft when indicator show that there are only remaining 2 battery level. Power off the Aircraft and take the Battery out. Discharge the Intelligent Flight Battery: 3 Remote Controller 3-1 Install Battery The Remote Controller is powered by 6pcs AA Alkaline Battery. Open the battery compartment

  • Wingsland Minivet, 10 L1-Middle Position: Stabilized Smooth GPS Mode. This mode has A/B type: A. Stabilized Smooth GPS Mode: Outdoor and strong GPS signal (GPS satellites ≥5). B. Normal Stabilized Mode: Indoor or Outdoor but weak GPS signal (GPS satellites <5). L1-1 Position: Automatic Return-to-Home Mode L1-0 Position: Manual Operation Mode (2) L1 Mode Control Switch (3-position switch) Warning Beginners do not try Manual Operation Mode. (3) L2 Mode Control Switch (3-position switch) L2-Middle Position: Standard Ready to Fly Mode L2-1 Position: Forward Direction Lock Mode L2-0 Position: POI Mode (Record a Point of i

  • Wingsland Minivet, (7) Trimming Button The Trimming Buttons are used for calibration of the stick neutral. Generally, no need to calibrate the stick neutral after corrected via the Minivet RC Assistant Software. But when the neutral position deviated and PC is not available, can use the Trimming Button to calibrate the stick neutral. Under Stabilized Smooth GPS Mode, the aircraft is deviated from the hovering point when hovering, the Trimming Button can calibrate until the aircraft hold a stable horizontal and height position. For example: If the nose direction deviates from the intended direction, the front and back position needs to be calibra

  • Wingsland Minivet, 11 To avoid of improper operation, the default factory is lock mode. Unlock procedures are as follows: Lock Trimming Button Method: Repeat the operation above. 1 2 Power off the Remote Controller. 3 4 Power on the Remote Controller. 5 (8) Link between the Remote Controller and Receiver The link between Remote Controller and aircraft has already established so you can initially skip this procedure. If you ever replace the Remote Controller, re-establishing the link is required. Link procedures are as follows: 1 Be sure the Aircraft is powered off. 2 Power off the Remote Controller. 3 Press down W2 and

  • Wingsland Minivet, Model 2 Caution 12 Figure 1 Figure 2 Figure 3 Figure 4 Figure 1 Figure 2 Figure 3 Figure 4 When hovering, the aircraft is deviated from the hovering point. The Remote Controller Neutral point recalibration is needed. The aircraft would not be controlled by the operator after activation the Return-To-Home Mode, so ensure no obstacles or passenger along the way home. Left Stick Right Stick Left Stick Right Stick Nose Direction Copyright@2015 WINGSLAND All Right Reserved Nose Direction Nose Direction Nose Direction Nose Direction Nose Direction Nose Direction Nose Direction Model 1 Caution

  • Wingsland Minivet, 13 (11) Remoter Controller Indicator Information Power LED Indicator Working Mode: Solid Lighting Remote Controller Link Calibration Mode: Fast Flashing Sound Indicator Power on the Remote Controller: there will be one indicator beep when the Remote Controller is powered on. Continuous beep indicates low voltage level warning, replace the battery immediately. Unlock Trimming Mode successfully: one beep. Lock Trimming Mode successfully: one beep. Switch between Mode 1 and Mode 2: One beep indicates Model 1.Two beep indicate Mode 2. Trimming Buttons Indicator Adjustments of Trimming Button: one beep. Trimming Maximum: two fast beeps. Trimming Neutral Point: two slow bee

  • Wingsland Minivet, 14 (2)Charge the Display Screen The Display Screen built-in Battery can be charged with PC or Smart Phone and connect to the charging port (Figure 1). The Display Screen Indicator LED displays RED to tell the charging status.The battery is fully charged after LED turns Green. (3)Display Screen Switch Press Power Button for 3 seconds to power on the Display Screen. (4)Switch Channel When Display Screen is interfered, the operator can press Display Screen Button rapidly once to switch Display Screen

  • 15 4-2 Camera Setting (3)Read the Video and Photo 1 Insert Micro-SD card to SD card reader, then connect with the computer via USB cable. 2 A new magnetic Disk will appear, click and open it. 3 Two folders in the new magnetic Disk: named [MOVIE] stores Videos files, Select Submenu: move Gimbal Joystick up and down. Enter/ playback menu: move Gimbal Joystick left and right. C

  • 5 Flight 16 5-1 Fight Notes (1)Flight Environment Requirements (2)Flight Limits and No-Fly Zones 5-2 Check and Calibrate the Compass Only fly in open areas without tall buildings surrounded. Metal and steel structures will affect GPS system and reduce stabilization of aircraft. Do not use aircraft in severe weather conditions. This includes wind speed exceeding 10m/s, snow, ra

  • Wingsland Minivet, 5-3 Flight Operation (1) Take off In an open area and strong GPS Signal Nose Direction GPS status indicator Motors Power On/Off Left Stick/Ascend(Slowly) Power On (2) Landing (Outdoor) Operate in the outdoor and make sure GPS signal is sufficient. 17 Left Stick/Descend(Slowly) Notice Notice Warning Figure 1 Figure 3 Figure 4 Figure 2 Figure 5 Figure 1 Place the aircraft on flat ground in an open area, with Rear Battery LED indicators facing operator (Figure 1). Make sure no obstacles or passengers. Adjust Display Screen channel (Press Display Screen Power Button rapidly once to swi

  • 18 6 GCS Assistant Software Operation 6-1 GCS Assistant Software Download and Upgrade Operation (1) Prepare the Aircraft and Software Obtain the latest Firmware from Wingsland website: www. szsungreeen.com or Windsland authorized dealer, save to PC. Click the “Firmware Choice” icon on “Firmware” interf -ace to choose the latest Firmware file. Click the

  • Wingsland Minivet, Firmware Status Attitude Remo te C ontro l Engl is h Cali br at io n RC 3D RC Dat e Stabil iz ed m od e Hot spot ci rcle mo de Sta nd ar d Hovering m od e Ret ur n to L au nch Care fr ee m od e 20 RC_3D 2 @ 2015 曼塔智能 版权所有 ( ) 2 Calibration Result verification. 1. Calibration Result verification A (Aircraft fly left and right) E (Aircraft fly forward and backward) T (the Throttle stick controls aircraft altitude, fly up and down) R (the stick controls the aircraft rudder, turn left or right) The ideal position Parameter for 4 above-mentioned sticks should be in the range of

Related Products and Documents (Quadcopters):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Whirlpool ELECTRIC RANGE User instructions whirlpool/electric-range-13C.pdf 27 Feb 2023 44 1.98 Mb
2 ARX EC-2 Specifications arx/ec-2-YOD.pdf 29 Oct 2022 2 0.06 Mb
3 Philips Senseo HD7860 Manual  philips/senseo-hd7860-A8O.pdf 08 Dec 2022 8
4 Nautilus NS 200X Owner's manual nautilus/ns-200x-858.pdf 13 Mar 2024 27
5 Sybase Adaptive Server Anywhere SNMP Extension Agent Operation & user’s manual sybase/adaptive-server-anywhere-snmp-extension-agent-XL8.pdf 25 Dec 2022 70
6 Cumberland Stove Works MF3500 Installation and operation manual cumberland-stove-works/mf3500-O5K.pdf 14 Nov 2023 2 0.32 Mb

Similar Resources:

  • TrendGeek

    TG-003

    (4 pages)
    Einlegen der Batterien Fitting the transmitter batteries Mise en place des piles Instalacion de las pilas Montaggio delle pile DE Öffnen Sie das Batteriefach und legen Sie 6x1,5AA Batterien ein . Achten Sie auf die richtige Polung.GB Open the back cover of the remote controller,insert 6×1.5"AA" alkaline batteries properly followe …
  • MindPX

    NANOMIND 110

    (13 pages)
    NANOMIND 110 USER MANUALHighlights- MindRacer in nano size frame, running MindPX & PX4 flight stack -heavy lifter, maximum take-off weight up to 80 g -5~7 minutes flight time -full modularized, stackable, soldering-free assemble -stackable style WEP expansion interface -DroneCode compliant sockets Website www.mindpx.net Contact support@mi …
  • Reely

    Green Racer FPV

    (164 pages)
    BedienungsanleitungElektro-Quadrocopter „Green Racer FPV“ RtFBest.-Nr. 1719347 Seite 2 - 42Operating Instructions“Green Racer FPV” RtF electric quadrocopterItem No. 1719347 Page 43 - 82Notice d’emploiQuadricoptère électrique « Green Racer FPV » RtFN° de commande 1719347 Page 83 - 123GebruiksaanwijzingElektrische Quadcopter „Green Racer F …
  • ACME

    zoopa Q 650

    (57 pages)
    ACME the game company Bedienungsanleitung Bitte vor Inbetriebnahme sorgfältig lesen! Anleitung Manual Handleiding Manuel d’utilisation Technische Daten Abmessungen: 520x520x75mm Altersempfehlung: 14+ Jahre Einsatzbereich: Indoor und Outdoor Akku: 7,4V LiPo; 850mAh Ferns …
  • UDI R/C

    VOYAGER U845Wifi

    (40 pages)
    User ManualU36WAltitude Hold ModeAerial Photography / Real-time FPV / WiFi ControlHeading Hold Mode / Low Battery AlarmOut of Range Alarm / One Button Take Off/Landing High/Low Speed Mode / Custom Route ModePiglet …
  • dji

    Matrice 100

    (80 pages)
    ©2015 DJI. All Rights Reserved. 1 DJI Matrix 100 User Manual V 1.0 2015.5 www.dji.com …

Comments, Questions and Opinions: