usbLogic USB-MFD3 Operation & User’s Manual
|
usbLogic USB-MFD3, Version 24.01.2012 USB-MFD3 usbLOGiC USB-AV-Player USB-MFD3 For navigation systems Volkswagen MFD3/RNS510, RNS810 Skoda Columbus Seat Trinax Only for vehicles WITHOUT factory rear-view camera Product features • USB-port for media up to 2 TB (2000GB) • supports FAT32 and NTFS formatted media • multi partition capable • compatible with MP3, AVI, VOB, MOV, RMVB, JPG and many more • last position memory • integrated into and controllable by vehicle infotainment • AV-input with IR-control channel • control of after-market devices by OEM buttons, e.g. DVD-player, USB/iPod devices, … • after-market r
Version 24.01.2012 USB-MFD3 Page1 Contents 1. Prior to Installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 1.3. Setting the dip switches of the CAN-box TV-403 1.4. Setting the dip switches of the USB-box USBC-M503 1.4.1. Automatic switching to rear-view camera 1.4.2. Deactivating usbLOGiC AV-input
usbLogic USB-MFD3, Version 24.01.2012 USB-MFD3 Page2 Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades. Changes/updates of the vehicle’s software can cause malfunctions of the interface. We offer free software-updates
usbLogic USB-MFD3, Version 24.01.2012 USB-MFD3 Page3 1.2. Check compatibility of vehicle and accessories 1.3. Setting the dip switches of the CAN-box TV-403 1.4. Setting the dip switches of the USB-box USBC-M503 The default dip switch settings of the USB-box need to be changed ONLY if an after-market rear-view camera shall be connected or if the AV of the usbLOGiC shall be deactivated. The dip switches are located inside the USB-box. For changes it is necessary to open the box. Default settings are: dip1 = ON, dip2 = OFF, dip3 = ON
usbLogic USB-MFD3, Version 24.01.2012 USB-MFD3 Page4 dip switches of USB-box dip switches of USB-box 1.4.1. Automatic switching to rear-view camera If an after-market rear-view camera shall be connected, in order for the usbLOGiC to automatically switch to its camera input on engaged reverse gear, set dip2 = ON (up). Note: With after-market cameras, automatic switching works only from usbLOGiC mode. For automatic switching from OEM modes, it is necessary to code the head-unit to rear-view c
Version 24.01.2012 USB-MFD3 Page6 3. Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead. Place of installation is behind the hea
usbLogic USB-MFD3, Version 24.01.2012 USB-MFD3 Page7 3.2. Connections to head-unit Remove the head-unit from the dash-board. Transfer female Quadlock connector from the back of the head-unit to male Quadlock connector of harness C3C-VW03. Plug female Quadlock connector of C3C-VW03 into male Quadlock socket of head-unit. Plug female 26pin AMP-connector of C3C-VW03 into male 26pin AMP-socket of head-unit. Note: If the 26pin AMP-socket of the head-unit is already occupied, the vehicle probably has a factory rear-view camera or a factory TV-tuner. In case of a factory tuner, it must be uninstalled: disconnect the female 26pin AMP-connector of the factory harnes
usbLogic USB-MFD3, Version 24.01.2012 USB-MFD3 Page8 3.3. USB and optional IR-remote control set Connect USB-connector of USB-installation socket USBC-EXT to USB-socket of USB- box USBC-M503 and install the USBC-EXT socket in a well accessible location, e.g. the glove-box. Make sure there is enough space to load USB-media. Installation socket for the connection of USB-media. The USB-IRSET consists of the external C3C-SENSOR IR-sensor and the USBC-RC IR- remote control and can be used to control the usbLOGiC’s internal USB functions additionally to the control through the navigations
Version 24.01.2012 USB-MFD3 Page9 3.4.1. AV-source The usbLOGiC has the possibility to connect and remotely control by navigation buttons a pre-programmed device. The device list in the device control table (appendix A) shows the pre-programmed remote channels and the related IR-remote cables STA-xxx which must be ordered separately for the control of th
usbLogic USB-MFD3, Version 24.01.2012 USB-MFD3 Page10 3.4.3. After-market rear-view camera Connect the video RCA of the after-market rear-view camera to female RCA connector R-CAM IN of USB-box USBC-M503. Connect the green wire of C3C-VW03 to the camera power supply (+12V max. 1A) The green wire is high (+12V max. 1A) when reverse gear is engaged. Note: Only compatible with NTSC-cameras. Automatic switching on reverse gear from OEM mode to camera input only works after coding the head-unit per diagnosis computer or our optional available OBD- coder OBD-MFD3-R-xx (Only possible on MFD3/RNS510 Version B with minimum software 1100). If coding is done
usbLogic USB-MFD3, Version 24.01.2012 USB-MFD3 Page11 3.4.4. After-market rear-seat-entertainment Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector VIDEO OUT of USB-box USBC-M503. Note: As the output is a full output, not shared with the video signal for the navigation system, splitting the video with an RCA Y-cable might give a good enough picture for two rear-seat-entertainment monitors. If not, or if connecting more than two monitors, use a video splitter. 4. Operation 4.1. Activation of the video-in-motion function The video-in-motion function
usbLogic USB-MFD3, Version 24.01.2012 USB-MFD3 Page12 4.4. Assigning device control for connected AV-source After selecting the usbLOGiC as current AV source, tap on the touch-screen to receive the options menu. Select Extras and then V-text. Select Seite (page). Enter “2”, followed by the device-related IR-code as described in device control table (appendix A). Confirm with OK. Note: If the AV-input is deactivated (see chapter “Deactivating usbLOGiC AV-input”), it is not necessary, nor po
usbLogic USB-MFD3, Version 24.01.2012 USB-MFD3 Page13 4.5.3. Menu/setup navigation To navigate through menu or setup options of the AV-sources, it is necessary to see their picture/OSD, which is not possible in the Senderliste (channel list). Instead, after entering menu/setup, select Extras and then V-Text. Now menu navigation is possible by the arrow buttons in the upper left corner of the head-unit (left/right) and touch-screen: Arrow up = UP, Arrow down = DOWN Stopp = back/return/exit Zoom = OK/Enter Note: Left/right can also be used to adjust the preset volume of the internal USB to match it to the volume of the OEM modes.
usbLogic USB-MFD3, Version 24.01.2012 USB-MFD3 Page14 7. Technical Support Caraudio-Systems Vertriebs GmbH NavLinkz GmbH manufacturer/distribution corporate sales/tech dealer-support Rheinhorststr. 22 Eurotec-Ring 45 D-67071 Ludwigshafen am Rhein D-47445 Moers phone +49 180 3 907050 email [email protected] Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners.
Alpine INE-W927HD Car Video System Owner's manual
INE-W927HD |
Dual XDVDN8190 Car Video System Installation & owner's manual
XDVDN8190 |
Sony CDX-HS70MW - Marine Stereo Car Video System Operating instructions manual
CDX-HS70MW - Marine Stereo |
AUSTRALIAN MONITOR IN600 Car Video System Installation and operation manual
IN600 |
Samsung SyncMaster 181 T Car Video System Owner's manual
SyncMaster 181 T |
Sony CDX-GT350MP - Fm/am Compact Disc Player Car Video System Installation/connections
CDX-GT350MP - Fm/am Compact Disc Player |
Kenwood DDX8901HD Car Video System Instruction manual
DDX8901HD |
Philips 170B6CG Car Video System Specifications
170B6CG |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | APART | PIR7600 | Owner's manual | apart/pir7600-29Y.pdf | 27 Dec 2022 | 4 | 0.54 Mb |
2 | BLADEZ | ST7i | Owner's manual | bladez/st7i-DA7.pdf | 17 Apr 2023 | 30 | 3.35 Mb |
3 | Columbia | 260 series | Operator's manual | columbia/260-series-61M.pdf | 15 Sep 2023 | 19 | |
4 | ADJ | FS600LED | User instructions | adj/fs600led-W9K.pdf | 12 Dec 2022 | 6 | |
5 | Swingline | BindMate | Instruction manual | swingline/bindmate-KJ6.pdf | 24 Oct 2023 | 8 | |
6 | Taski | vento 8 | Instructions of use | taski/vento-8-E9U.pdf | 11 Feb 2023 | 5 |
Boss Audio Systems
Remove the screws which attach the sunvisor to the ceiling of your vehicle. Placethe visor on clean towel or cloth in a cleanarea of your worksurface.Using the wires provided, complete the audio, video and power connections inyour vehicle as shown in the diagram below.The installation instructions describe the process of installing the monitor into thesun vi …
BV6VIS(12 pages) |
PNI
PNI V6280Car multimedia player / Мултимедиен плейър за кола / Multimedia-Player im Auto / Reproductor multimedia para coche / Lecteur multimédia de voiture / Autós multimédia lejátszó / Lettore multimediale per auto / Auto multimediaspeler / Samochodowy odtwarzacz multimedialnyMultimedia player autoEN User manual................. …
V6280(114 pages) |
Hyundai
CAR NAVIGATION / DVD PLAYEROWNER’S MANUALMODEL : AzeraVeracruzSanta FePlease read this instruction booklet carefully and completelybefore connecting, operating or adjusting this product.Support - HotlineMap & Map UpdateTel No. : 1-888-757-0010Web Site : http://www.mapnsoft.comOverall Navigation Menu, Audio, CD, DVD MenuTel No : 1-888-599-6284
…
Azera(36 pages) |
Blaupunkt
CAR MULTIMEDIAJamaica 970NOTE: Please do not watch videos or use other Apps while the vehicle is in motion. Doing so, is a safety violation. To watch videos or use Apps, please ensure that the vehicle is in parked mode with handbrake activated. Please check compatibility of the device with your mobile phone before pur …
Jamaica 970(23 pages) |
Xomax
1XOMAXENTopic: XM-DTSB7010Thank you for purchasing one of our XOMAX products! We appreciate your condence. Enjoy your brand new multimedia unit!Please read the following manual carefully before you install and use the unit. Please save this manual in case you will need to clarify further possible questions regarding installation and usage of our product …
XM-DTSB7010(18 pages) |
JVC
KV-M70 (EN)TQBX0243[E]ENGLISHDEUTSCHFRANÇAISNEDERLANDSKV-M70Display unitBildschirmgerätUnité d’affichangeDisplay-eenheidController unitSteuergerätUnité de commandeBedieningseenheidWireless remote controllerDrahtlose FernbedienungTélécommande sans filDraadloze afstandsbedieningFor installation and connections, refer to the separate manual.Für Instal …
Car LCD Monitor KV-M70(98 pages) |
Sony Ericsson Cell Phone Walkman W300iSony Ericsson Cell Phone Walkman W300i Operation & user’s manual Walkman W300i, 73 |
Acson Air Conditioner IM-MSDT-0501-ACSON#6HYL79 IM-MSDT-0501-ACSON: Acson Air Conditioner Owner Documentation IM-MSDT-0501-ACSON, 96 |
Kenwood DVD Player DV-6050DVD Player PDF Instruction manual DV-6050, 68 |
Bacharach Air Conditioner StingerStinger (Air Conditioner ePDF User Manual, #B8STZ1) Stinger, 2 |
Lightolier Indoor Furnishing LUMINOSITIES “ADA#21QZ8W: LUMINOSITIES “ADA Indoor Furnishing Instructions for maintenance reference LUMINOSITIES “ADA, 1 |
Bacharach Security Sensors 6401-05006401-0500 Installation and operation manual - O6U5Q4 6401-0500, 60 |
Kogan Kitchen Appliance KAPIEMKR4HAGuide: Kogan KAPIEMKR4HA (W4NOOM, Upd.08/10/2023) KAPIEMKR4HA, 18 |
Boca Systems Computer Accessories WT120Computer Accessories PDF User handbook manual WT120, 28 |
Ninja Blender BL450QUK seriesNinja Blender BL450QUK series Owner's manual BL450QUK series, 9 |
HP All in One Printer Officejet 4500PDF User Guide (@XA5IZ9), HP Officejet 4500 All in One Printer (04/02/2024) Officejet 4500, 4 |
BT Telephone Diverse 7460BT Product Manual: Diverse 7460 PDF Operation & user’s manual - 3JU42G Diverse 7460, 67 |