Zaxcom ZFR400 Operation & User’s Manual

Text of Zaxcom ZFR400 User Guide:

• Zaxcom ZFR400, Zaxcom ZFR400 ZFR400 5 1. Micro SD Card Slot Inserting a Micro SD card: With the OLED screen of the ZFR400 facing you, turn the card so the finger contacts are facing away towards the battery compartment and pointing down toward the slot. Insert the card into the slot and press it down until there is a slight click. To remove it, press the card in until the same click is heard again. 2. Microphone Connector (3 pin Lemo) 3.

• Zaxcom ZFR400 Recording Media 22 Media While any size card will work in the ZFR400 we recommend using a 4GB Micro SD card. We also recommend only buying a brand name card such as Transcend, SanDisk. And very importantly please buy all cards from a re

• Zaxcom ZFR400, Zaxcom ZFR400 Time Code Menu 9 TIME CODE MENU Time Code Frame Rate Set This menu is where the time code frame rate is set. The ZFR400 will lock to and record all standard time code frame rates.  23.98, 24, 25, 29.97DF, 29.97DF, 30 DF, 30 NDF Time Code Source Select The time code source menu selects how the ZFR400 will receive its time code.  ZAXNET (RF) - The ZFR400 will receive time code via ZaxNet from a Nomad, a QRX235, IFB100/200, TRX900CL or a TRX transmitter or another ZFR recorder that is transmitting ZaxNet time code. �

• Zaxcom ZFR400, Zaxcom ZFR400 ZaxNet Menu 13 ZAXNET MENU ZaxNet Mode This menu sets the mode of the ZaxNet transceiver.  OFF - The ZaxNet transceiver is disabled. The ZFR400 will not receive ZaxNet commands or time code and it will not send any ZaxNet audio. Please note if ZaxNet mode is set to OFF the several ZaxNet menu items will not appear.  RX - The ZaxNet transceiver will receive Z

• Zaxcom ZFR400, Zaxcom ZFR400 Setup Menu 21 Hide Name Menu This setting will hide the name menu. A hidden name menu allows for quicker navigation and prevents accidental changes.  HIDDEN - The name menu doesn’t appear when cycling through the menu settings.  DISPLAYED - The name menu will appear. Name Set The name menu allows the ZFR400 to be named to be changed from the default name - which is the unit’s serial number. The name entered becomes part of the name of the recorded audio

• Zaxcom ZFR400, 2 ZFR400 ......................................................................................................................................................... 4 HOME SCREEN .............................................................................................................................................. 6 MAIN MENU ................................................................................................................................................. 7 HOME SCREEN .............................................................................................................................................

• Zaxcom ZFR400, Zaxcom ZFR400 ZaxNet Menu 16 IFB Receive Pulse Set This menu will only appear if ZaxNet is set to go into transmit in the RX to TX Time menu. This menu sets the interval that the ZaxNet transceiver will stop sending confidence audio and search for time code. When enabled the pulse setting tells the ZaxNet transceiver to leave ZaxNet transmit mode once every XXX seconds and go into receive mode so it can re-jam its time code wirelessly via ZaxNet. This setting would be used so the ZFR400 could update its time code while m

• Zaxcom ZFR400, Zaxcom ZFR400 Time Code Menu 10 Mute Time Code Transmission Until Jammed If the mute time code menu is set to ON the ZaxNet ZFR400 will not broadcast time code over ZaxNet until the ZFR400 receives time code and jams its own internal time code generator. This prevents the ZaxNet from sending incorrect time code to another device. Auto Frame Rate Enable When turned ON the ZFR400 will automatically set its frame rate to the frame rate that is being transmitted from the ZaxNet transmitter that is feeding th

• Zaxcom ZFR400 Home Screen 6 Home Screen Transport Status - Displays the current mode of the recording feature.  STOP - Recording / Playback is stopped  LREC - ZFR400 is recording in LOOP RECORD mode.  REC - ZFR400 is recording i

• Zaxcom ZFR400, Zaxcom ZFR400 Audio Menu 17 AUDIO MENU High Pass Filter The high pass filter is turned on and adjusted from this menu. The high pass filter range is 70Hz to 220Hz in 10Hz increments. 2K Notch Filter The 2K notch filter is useful in removing digital RF interference that can be introduced into some microphones. HIGH PASS FILTER: 90Hz ____ 2K NOTCH FILTER ON

• Zaxcom ZFR400, 29 RF Exposure: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment is in direct contact with the body of the user under normal operating conditions. This ZFR400 must not be co-located or operating in conjunction with any other antenna or ZFR400. Under Industry Canada regulations, this radio ZFR400 may only operate using an antenna of a type and maximum (or lesser) gain approved for the ZFR400 by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more

• Zaxcom ZFR400, Zaxcom ZFR400 Setup Menu 20 OLED Brightness Adjust This setting adjusts the brightness of the OLED display. The brightness setting is from 0 to 3 with 3 being the brightness. OLED Display Dim This setting adjusts the brightness of the OLED display. The brightness can be set from 0 to 3 with 3 being the brightest and 0 the dimmest. Information Page This page displays the current firmware version, the serial number, the DSP version, and the option code. Hide Encryption M

• Zaxcom ZFR400, Zaxcom ZFR400 Main Menu 7 Main Menu To cycle through the main menu press the MENU key. Home Screen Recorded files can be played back from the home screen. Playing back from the home screen  Pressing the INC key while stopped will play the segment number that is displayed.  Pressing the DEC key while playing back will stop the playback.  Holding the INC key will jump ahead one segment.  Pre

• Zaxcom ZFR400, Zaxcom ZFR400 Wiring Diagrams 24 Inputting Audio The ZFR400 use an unbalanced microphone input via a 3-pin micro-LEMO connector. An unbalanced dynamic microphone or a powered lavaliere can be used. The ZFR400 can also accept a line-level input, though an inline pad is required. Recommended Microphones Zaxcom recommends the following microphones for use with the ZFR400: Countryman EMW, B3,

• Zaxcom ZFR400, 3 SETUP MENU ............................................................................................................................................... 19 TEST TONE ................................................................................................................................................................................19 KEY LOCK ON BOOT UP ...............................................................................................................................................................19 E

• Zaxcom ZFR400, Zaxcom ZFR400 Setup Menu 19 SETUP MENU Test Tone     The ZFR400 has an internal tone generator so the signal chain can be properly gain staged. From this menu pressing the INC key will turn on the tone generator pressing the INC key will cycle trough the different tone options (500Hz at -20, 1000Hz at -20 or 500Hz at full scale). Key Lock On Boot Up This menu sets what happens to the keys on the face of the ZFR400 after boot-up.  LOCKED - After boot-up has completed, the ZFR400

• Zaxcom ZFR400 ZaxNet Menu 15 ZaxNet Receive Before Transmit Time This menu adjusts the state of the ZaxNet transceiver. This menu also sets how long after boot-up up the ZFR400 will search for ZaxNet time code

• Zaxcom ZFR400, Zaxcom ZFR400 ZFR400 4 ZFR400 1. Card / Power Key  Push and hold for 2 seconds to power on the ZFR400.  Push and hold 3 seconds followed by a quick press of the MENU key to power the ZFR400 off .  Press 3 times quickly to access the sub menus.  Press 3 times quickly to return to the home screen. 2. OLED Display 3. Menu / Play Key  Press it to access the next menu item.  Press it with the CARD key to playback a segment. 4

• Zaxcom ZFR400, Zaxcom ZFR400 Support 26 Product Support Register your product with Zaxcom: http://zaxcom.com/support/product-registration/ Download the latest Firmware from: http://zaxcom.com/support/updates/ Download the latest User Manuals from: http://zaxcom.com/support/updates/ Submit Technical Questions at: http://www.zaxcom.com/submit-a-technical-question Submit information for Repair Services at: http://www.zaxcom.com/support/repairs Join the Zaxcom User Forum at:

Related Products and Documents (Voice Recorder):

Comparable Devices:

Similar Resources:

• Tascam DR-701D (2 pages) DR-701DD01334100B 0318.MA-2487B取扱説明書・追補ファームウェアV2.00の新機能ファームウェアV2.00より、次の新機能を追加しました。 0アンビソニックスモードの追加 0メニュー画面表示中の操作の追加 04ch …

• Olympus DM-720 (2 pages) How to set the Date and Time.1. Press the Menu button located on the front of the recorder. 2. Press the + or - button to navigate to the Device Menu.3. Press the FFW button to access the settings in the Device Menu. 4. Press the + or - button to navigate to Time & Date then press the OK button. 5. Press the + or - button to set the hour then press …

• Swann SW234-PC2 (8 pages) 1Advanced security made easy™SW234-PC2 / SW234-PCG / SW361-PD2 / SW361-PD4www.swannsecurity.com PenCam RecorderMini Video Camera & RecorderOperating Instructionsplug&playsecurityMPD2200710E …

• Sony ICD-TX50 (4 pages) The highly versatile ICD-TX50 Digital Voice Recorder is meant for business, packing powerful recording functionality and convenience in an ultra-sleek form factor. Simple MP3 recording capability along with 4GB1 of internal memory and a microSD memory card slot allow for endless recording capacity, while the internal, rechargeable lithium-ion battery with Q …

• Honeywell X Series (5 pages) 43-TV-33-71 iss.2 GLO Jan 21 UK 1 X Series QX Recorder - Installation Instruction Inverter replacement X Series QX Recorder This Installation Instruction sheet is intended as a guide for replacing or installing hardware and for setting up functionality in the recorder. Refer to the User manual for detailed operational requirements. The QX …

• Sony TCS-30D (2 pages) TCS-30DPressman®Portable Cassette Recorder▲ STEREO RECORDING WITH SUPPLIED MIC▲ STEREO PLAYBACK WITH SUPPLIED HEADPHONES• DOUBLE RECORDING TIME• 350 MW OUTPUT POWER• CLEAR VOICE™ENHANCEMENT• BUILT-IN MONAURAL MIC• FRONT SPEAKER• STEREO MIC JACK• ONE-TOUCH RECORDING• LED BATTERY LEVEL INDICATOR• AUTOMATIC SHUT-OFF• CUE/REVIEW FUNCTI …

Comments, Questions and Opinions: