Manualios.com

Oricom SC330 Operation & User’s Manual

Oricom SC330 Manual Online:

3.15, 1470 votes
Oricom SC330 User Manual
Oricom SC330 User Guide
Oricom SC330 Online Manual

Text of Oricom SC330 User Guide:

  • Oricom SC330, 12 Audio Level Indicator Monitor will display green LED light when there is low level audio, and change to red on higher level audio. The brightness of the LED increases as the audio increases. List of tones Your SC330 Digital Baby Monitor can produce various tones. They have the following meaning: Tone Meaning Single tone Conrmation (for example, saving a setting) Fast double tone Error (for example, trying to change the volume but already reached maximum) Fast triple tone System alert (for example, link lost or battery low) You can turn off user

  • Oricom SC330, 13 Resetting the units Resetting either units means they’ll return to the settings they came with. 1. Make sure the unit you’re resetting is switched on. 2. Hold down for 10 seconds. The unit will switch off and turn back on when the reset has been completed. You should only reset if you’re having problems with your monitor. Using your SC330 Digital Baby Monitor

  • Oricom SC330, SC330 Digital Baby Monitor User Guide KEEP THIS USER GUIDE FOR FUTURE REFERENCE Always retain your proof of purchase in case of warranty service and register your product on line at: AUSTRALIA: www.oricom.com.au NEW ZEALAND: www.oricom.co.nz

  • Oricom SC330, Your SC330 Digital Baby Monitor Parent unit HD Sound LinkMute Mute light Remains on when your Parent unit is on mute. Volume down Turns the speaker down. Battery light Flashes if your battery is low, remains steady if your unit is charging. Power Press and hold to turn the unit on or off. Volume up Turns the speaker volume up. Link light Flashes when your monitor is trying to nd a link. Remains solid when the Parent and Baby units are linked to each other. Power socket (on the back) For connecting to the mains power socket using the power adapter cable supplied. LED light showing audio level Green low level audio Red high level audio

  • 19 Please note that this Express Warranty excludes expenses incurred by you in returning any faulty product to us. You must arrange and pay any expenses incurred (including postage, delivery, freight, transportation or insurance of the product) to return the faulty product to us, however, we will arrange delivery of the repaired or replaced faulty product to y

  • Warning Only use the power adaptors supplied. Using incorrect power adaptors may permanently damage your product. Battery low alert on Parent unit When the batteries on your Parent unit are running out, an alert will sound and the battery will ash. When this happens, you’ll need to charge the batteries. Warning Always use rechargeable batteries in

  • Oricom SC330, 8 Setting up 4. Leave the batteries to charge for 16 hours to reach maximum charge. Baby unit 1. Plug the remaining power cable into the socket on the back of the Baby unit. 2. Plug the other end of the cable into your mains wall socket and switch it on. Taking out the batteries If you ever need to remove the batteries, slide open the battery compartment cover and use the ribbon to pull them out. Battery performance Rechargeable batteries in the Parent unit will last up to 16 hours during normal operation this time may be extended when Mute

  • Oricom SC330, Express Warranty (Australia) This Express Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South Windsor NSW 2756, herein after referred to as “Oricom”. Oricom products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Ori

  • Oricom SC330, 15 Relinking your Baby Monitor On Baby unit, press and hold the “power” button until “LINK” LED is blinking. Then on Parent unit press and hold the “power” button until “LINK” LED is blinking. Linking should be done within 60 seconds and both link LEDs will stay on. What do I do if the battery is showing as low on the Parent unit? • Plug the unit into a wall power socket to charge it. It’s best to leave the unit plugged in whenever you can, to make sure the batteries are always charged. • To fully charge the batteries, the Parent unit should be on charge for about 16 hours if sw

  • Oricom SC330, HD Sound LinkMute Thanks for buying a Oricom SC330 Digital Baby Monitor. You’ll soon be able to relax knowing you can listen for your baby’s every gurgle, snufe or cry. But rst things rst. To get set up, just follow the steps from page 7. Set-up only takes a few minutes. Then, you can learn all about your monitor and how to use it from page 11. Need help? If you need assistance setting up or using your Oricom product now or in the future, call Oricom Support. Australia 1300 889 785 or 02 4574 8888 www.oricom.com.au Mon-Fri 8am – 6pm AEST New Zealand 0800 67 42 66 w

  • Oricom SC330, 9Setting up Switching on and linking the Parent and Baby units Before switching on, make sure the Parent and Baby unit are at least one metre from each other. Any closer and you might get audio feedback sounds. 1. Press and hold the button on the Baby unit until the orange Link indicator ashes. 2. Press and hold the button on the Parent unit until all the LEDs on the unit briey light up. The orange Link indicator will ash and then will remain steady when the units have linked. 3. When the units are linked, the orange Link indicator lights on the Parent and Baby units will stop ashing. When the lights stay steady,

  • Oricom SC330, ORICOM CUSTOMER SUPPORT Oricom have a trained and dedicated team of Customer Support Representatives, each with the knowledge and resources to assist in answering your questions quickly and efciently. Oricom Support - Australia For all product enquiries, troubleshooting or to discuss the range of Oricom products, feel free to contact Oricom or visit our website for answers to frequently asked questions. 1300 889 785 Monday - Friday 8am – 6pm AEST Email: [email protected] www.oricom.com.au Oricom Support - New Zealand 0800 674 266 Monday - Friday 11am - 7pm NZST Email: [email protected] www.oricom.co.nz Ref: 27112017

  • Oricom SC330, If you have any problems setting up or using your baby monitor, see if these common questions can help. Why is the Parent unit beeping? Take a look at page 12 for a list of the tones the Parent unit makes. It could be beeping for a few different reasons. • The link has been lost between your units. Check that the Baby unit Link indicator is illuminated. If not, make sure the power adapter is still connected. • The batteries are low. See page 7. If the Parent unit still beeps after this, try switching the Baby unit o

  • Oricom SC330, 3 • It is very important that you read the User Guide carefully as it contains detailed information you will need to get the most from your Oricom baby monitor. If you have any issues setting up or using your Oricom baby monitor please call our Customer Support team. • Your Oricom baby monitor is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision of a child. • The baby monitor has been designed to provide some added reassurance in the form of sound transmission for those times when you are not in the same room as your baby provided you always stay within hearing range of

  • Oricom SC330, Using your SC330 Digital Baby Monitor 11 Switching on/off Switching the Baby unit on 1. Press and hold the button, the orange Link light ashes. When it’s nished linking, it’ll stop ashing and remain steady. 2. To switch off, press and hold the button again. Switching the Parent unit on 1. Press and hold the button on your Parent unit. The LED lights will ash when the units are linking. When the units have found each other, your Parent unit will go back to its idle screen. 2. To switch off, press and hold the button again. The screen will go blank and all the lights will switch off. Changing the loudspeaker

  • Oricom SC330, 18 How to make a claim under your Express Warranty in Australia Oricom has a simple warranty process for you to follow: • Please call or email our Customer Support Team, 1300 889 785 or [email protected]. • A Customer Support Team member will verify after troubleshooting with you if your product qualies under warranty. If so, they will give you a Product Return Authorisation number. • We will then email or fax a Return Authorisation form and a Repair Notice (if necessary), together with instructions on how to return the goods for warranty service. Please note that if a Customer Support Team member advises that your product does not qualify for return, this

  • Oricom SC330, 17 Express Warranty (Australia) This Express Warranty extends to the original purchaser only and is not transferable. Products distributed by Oricom are manufactured using new materials or new and used materials equivalent to new in performance and reliability. Spare parts may be new or equivalent to new. Spare parts are warranted to be free from defects in material or workmanship for thirty (30) days or for the remainder of the Express Warranty Period of the Oricom branded product in which they are installed, whichever is longer. During the Express Warranty Period, Oricom will where possible repair and if not replace the faulty product or part thereof. Al

  • 6 Your SC330 Digital Baby Monitor Baby unit Link Power on/off Press and hold to switch the power on or off. Microphone Link indicator Flashes orange when your monitor is trying to nd a link. Remains solid when the Parent and Baby units are linked to each other. Power socket (on the back) For connecting to the mains power socket using the power ad

  • Oricom SC330, 4 Contents Your SC330 Digital Baby Monitor Parent unit ........................................... 5 Baby unit.............................................. 6 Setting up Parent unit ........................................... 7 Baby unit.............................................. 8 Switching on and linking the Parent and Baby units ......................... 9 Deciding where to put your units ......... 9 Using your SC330 Digital Baby Monitor Switching the Baby unit on/off ........... 11 Switching the Parent unit on/off ......... 11 Changing the loudspeaker volume on your Parent unit ............................ 12 List of tones .............

Related Products and Documents (Baby Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 ColdTech J2SFF-21B Specifications coldtech/j2sff-21b-14X.pdf 04 Jan 2024 2 2.81 Mb
2 Weller WHA900 Operating instructions manual weller/wha900-Z6K.pdf 10 Jan 2023 11
3 Harman Kardon HK610 Owner's manual harman-kardon/hk610-1K6.pdf 26 May 2023 8 0.43 Mb
4 HP 6125G Quickspecs hp/6125g-41O.pdf 16 Oct 2022 11
5 Samsung SC-MM10 Owner's instruction book samsung/sc-mm10-WE6.pdf 19 Nov 2022 147 6.3 Mb
6 Toshiba e-STUDIO 16P Service manual toshiba/e-studio-16p-8A8.pdf 10 Jul 2022 174

Similar Resources:

  • Angelcare

    AC601

    (13 pages)
    OWNER’S MANUALSIMPLICITY MOVEMENT SENSOR WITH SOUND BABY MONITORModel AC601for your peace of mindMovement AlarmYour monitor comes with the movement alarm activated. When switching on your monitor it will alarm, with or without the Sensor Pad plugged in, if no movement is detected. Deactivate the movement function to use the monitor without the Sensor Pad.B …
  • Motorola

    MBP85CONNECT

    (2 pages)
    QUICK START GUIDEFor a full explanation of all features and instructions, please refer to the User’s Guide.1. Setting up your Wi-Fi® Video Baby Monitor CameraMODEL: MBP85CONNECT1. Insert the Power Adapter plug into the micro USB socket at the back of the Camera Unit.2. Connect the other end of the Power Adapter into a suitable mains power socket.3. Switch …
  • Summer

    29616

    (32 pages)
    WARNING!STRANGULATION HAZARD! - Children have STRANGLED in cords. Keep this cord out of reach of children (more than 1 m away from the crib). Use enclosed Security Clips to help secure cord away from baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.Adult …
  • Summer

    Baby Wave 28910

    (4 pages)
    This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interferencethat may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada a …
  • Anker

    eufy Security SpaceView Pro

    (16 pages)
    USER MANUALSpaceView Pro Baby Monitor Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.51005002424 V01 …
  • Angelcare

    AC527

    (48 pages)
    Keep user’s guide for future reference. Please read the warnings and safety instructions carefully before assembling & using the product. Failure to follow the warnings and the instructions could result in serious injury or death or damage to the product.WARNING Model AC527 Baby Movement, Sound and Video Monitor, 5’’ TouchscreenUSER MANUALIMPORTA …

Comments, Questions and Opinions: