KTI Networks KE-PCI/T Operation & User’s Manual

Text of KTI Networks KE-PCI/T User Guide:

• FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy

• KTI Networks KE-PCI/T, iii Table of Contents INTRODUCTION..................................................1 PCI ETHERNET CARD....................................... 1 PRODUCT FEATURES ......................................... 2 PACKING LIST..................................................... 3 INSTALLATION....................................................3 HARDWARE INSTALLATION.............................. 3 CONFIGURATION ................................................ 4 DRIVER INSTALLATION..................................... 4 BOOT ROM INSTALLATION ............................ 4 PRODUCT SPECIFICATIONS.........................5

• KTI Networks KE-PCI/T, 1 Introduction Congratulations on your purchase of a PCI 10Mbps Ethernet adapter. This adapter was designed and manufactured to give you years of trouble-free and reliable service. PCI Ethernet Card The PCI Ethernet adapter is high performance adapter compatible with version 2.0 of the PCI local bus specification and support Plug and Play (PnP) function, making it fully auto-configuration. The adapter supports full-duplex mode. Full duplex mode can be used to obtain throughput up to 20Mbps when the twisted- pair port connecting through an Ethernet switching hub. This feature not only increases the channel bandwidth from 10Mbps to 20Mbps but also avoids the performance-degrading problem

• KTI Networks KE-PCI/T, 2 Product Features l Meets PCI Local Bus specification, Rev.2.0 l PCI 32-bit architecture l Compliant to IEEE 802.3 10BASE-2 and 10BASE-T standards. l Supports PCI Plug and Play configuration. l Supports Full-Duplex Ethernet function to double channel bandwidth. l Automatic port selection between 10BASE-2 interface(BNC) and 10BASE-T interface(RJ-45) l Support 100ohm STP/UTP cables using Category 3, 4 or 5 l On-board socket for remote Boot ROM. l LED Indicators One LED on the bracket provides LINK indicators. State Descript

• KTI Networks KE-PCI/T, 3 Packing List The adapter package should contain the following items: l One 32-bit PCI Ethernet adapter l This User’s guide l One 3.5” driver diskette l One T-connector (for BNC port only) If any of these items are missing contact your reseller. Installation Hardware Installation 1. Turn OFF the computer, unplug the power cord and open the computer case. 2. Pick a free PCI expansion slot and remove the expansion slot cover. Insert the adapter into the slot until it is fully seated. Secur

• 4 Configuration This Ethernet adapter is automatically configured when you power-on computer. In certain computer, however, you must modify BIOS by entering CMOS SETUP utility to enable “PCI Device” and map INTA to an appropriate address. Please refer to the system documentation for details on configuration the PCI SYSTEM BIOS. Driver Installation Before you connect adapt

• KTI Networks KE-PCI/T, 5 Product Specifications Standards Wiring connector Bus Interface I/O address IRQ Line Operating Temperature Humidity Emissions IEEE 10BASE-2, 10BASE-T PCI Local Bus specification Rev.2.1 BNC and RJ-45 32-bit PCI bus Automatically determined by configuration space INTA, being assigned by the BIOS to free I/O address 0 °C – 40 °C (32 °F – 104 °F) 10% to 90% non-condensing FCC Class B CE Mark

Related Products and Documents (PCI Card):

Comparable Devices:

Similar Resources:

• Encore ENLWI-N (2 pages) 802.11n Wireless PCI Adapter Model Number:  ENLWI-N Product Description: ENCORE ENLWI-N 802.11n Wireless PCI adapter provides users to launch IEEE 802.11n wireless network at 300 Mbps in the 2.4GHz band, which is also compatible with IEEE 802.11b/g wireless devices at 11/54 Mbps. You can configure this adapter with ad-hoc mode to connect …

• TP-Link TL-WDN4800 (2 pages) Hardware Connection1Quick Installation Guide450Mbps Wireless N Dual Band PCI Express AdapterMODEL NO. TL-WDN48007106504041For Windows VistaFor Windows XPYou may see the Found New Hardware Wizard after the adapter has been inserted. Please click ‘Cancel’.Package ContentsSystem Requirement· Windows 7 · Windows Vista · Wi …

• StarTech.com PEXUS313AC2V (2 pages) Instruction manualFR: Guide de l’utilisateur - fr.startech.comDE: Bedienungsanleitung - de.startech.comES: Guía del usuario - es.startech.comNL: Gebruiksaanwijzing - nl.startech.comPT: Guia do usuário - pt.startech.comIT: Guida per l’uso - it.startech.comJP: 取扱説明書 - jp.startech.comManual Revision: 02/12/2018For the latest information, technic …

• Masterclock GPSPCI (12 pages) GPSPCI 2/7/2008 Rev 1.2.1 a Masterclock, Inc. GPSPCI USER MANUAL www.masterclock.com Tel: 636-724-3666 Fax: 636-724-3776 2484 W Clay St, St. Charles MO 63301 © Masterclock, Inc. Jan-10 Printed in USA …

• Compex WLM54AG (4 pages) Quick Install GuideCompexWireless-AGMini PCI AdapterWLM54AGVersion 1.1 1. IntroductionThis mini PCI adapter, Compex WLM54AG contains a dual-modesingle chip MAC/BB/Radio for IEEE 802.11a, 11g and 11b WirelessLAN. It can support high-speed data transmission of up to 54Mbps inthe 2.4GHz and 5GHz frequency bands based on 802.11b/ …

• National Instruments R Series (10 pages) GETTING STARTED GUIDENI PXIe-7857RR Series Reconfigurable I/O Module (AI, AO, DIO) for PXI Express,8 AI, 8 AO, 48 DIO, 1 MS/s AI, 512 MB DRAM, Kintex-7 160T FPGAThis document describes how to begin using the NI PXIe-7857R.Safety GuidelinesCaution Do not operate the NI PXIe-7857R in a manner not specified in thisdocument. Product misuse can result in a hazar …

Comments, Questions and Opinions: