Manualios.com

Kramer RC-53D Operation & User’s Manual

Kramer RC-53D Manual Online:

4.55, 1318 votes
Kramer RC-53D User Manual
Kramer RC-53D User Guide
Kramer RC-53D Online Manual

Text of Kramer RC-53D User Guide:

  • Kramer RC-53D, Kramer Electronics, Ltd. USER MANUAL Model: RC-53D K-NET™ Auxiliary Control Panel im Vertrieb von CAMBOARD Electronics www.camboard.de Tel. 07131 911201 Fax 07131 911203 [email protected]

  • Kramer RC-53D, Contents i Contents 1 Introduction 1 2 Getting Started 1 2.1 Achieving the Best Performance 2 2.2 Safety Instructions 2 2.3 Recycling Kramer Products 2 3 Overview 3 4 Defining the RC-53D 3 4.1 Grounding the RC-53D 5 5 Using the RC-53D K-NET™ Auxiliary Control Panel 6 6 Installing the RC-53D Faceplate, Button Caps and Labels 7 7 Operating the RC-53D K-NET™ Auxiliary Control Panel 9 8 Technical Specifications 10 Figures Figure 1: RC-53D K-NET™ Auxili

  • Kramer RC-53D, Introduction 1 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function. Congr

  • Kramer RC-53D, KRAMER: SIMPLE CREATIVE TECHNOLOGY Getting Started 2 2.1 Achieving the Best Performance To achieve the best performance: • Use only good quality connection cables (we recommend Kramer high- performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables) • Do not secure the cables in tight bundles or roll the slack into tight coils • Avoid interference from neighboring electrical applian

  • Kramer RC-53D, Overview 3 3 3 Overview The RC-53D is an auxiliary remote control panel for Master Room Controllers 1 for control of A/V equipment in a room. The RC-53D: • Features six front panel, single color, backlit buttons designed in two groups; one group of two buttons, and another group of four buttons • Has a digital volume control adjustment knob • Is available as a 2 Gang wall plate for the USA or a 2 Gang wall plate for Europe 2 • Does not require a separate power supply • Includes an RS-232 serial port • Includes two K-NET ports and a USB port for firmware upgrade • Features two programmable LCD displays, one for each button grou

  • Kramer RC-53D, KRAMER: SIMPLE CREATIVE TECHNOLOGY Defining the RC-53D 4 Table 1: RC-53D K-NET™ Auxiliary Control Panel – Front Panel Features # Feature Function 1 SOURCE Buttons Group of four programmable, backlit buttons 1 2 Faceplate Screws Four screws connecting the faceplate to the Rear Box 3 “DISPLAY” and “SOURCE” Labels Programmable, 8 character, LCD displays on a blue background 4 DISPLAY Buttons Group of two programmable, backlit buttons 5 Maximum VOLUME LED Lights red, indicating maximum volume 6 VOLUME LEDs Light green, indicating volume level 7 VOLUME Knob Rotate clockwise to increase volume level Figure 2 and

  • Kramer RC-53D, Defining the RC-53D 5 5 4.1 Grounding the RC-53D The grounding screw is used to earth the chassis of the unit to the building ground preventing static electricity from impacting the performance of the unit. Figure and 3 Table define the grounding screw components. 3 Figure 3: Grounding Connection Components Table 3: Grounding Component Descriptions # Component Description 1 M3X6 screw 2 1/8" Toothed Lock Washer 3 M3 Ring Tongue Terminal To ground the RC-53DLC: 1. Connect the Ring Tongue terminal to the building grounding

  • Kramer RC-53D, KRAMER: SIMPLE CREATIVE TECHNOLOGY Using the RC-53D K-NET™ Auxiliary Control Panel 6 5 Using the RC-53D K-NET™ Auxiliary Control Panel The installation process is not detailed in this user manual. This user manual is applicable once the unit is installed and configured 1 , and includes: • Setting up the labels on the buttons, according to your specific requirements • Configuration of the Master room controller via the K-Config Windows ® -based configuration software Since the auxiliary panel is used as a remote controller for Master Room Controllers via the proprietary communication channel K-NET (as illustra

  • Installing the RC-53D Faceplate, Button Caps and Labels 7 7 6 Installing the RC-53D Faceplate, Button Caps and Labels This section describes how to install the faceplate, button caps and labels. Figure 5 illustrates a sample button label sheet. Figure 5: Sample Button Label Sheet To install the faceplate, button caps and labels: 1. Remove the requi

  • Kramer RC-53D, KRAMER: SIMPLE CREATIVE TECHNOLOGY Installing the RC-53D Faceplate, Button Caps and Labels 8 5. Retaining the orientation, place the six button caps on the buttons of the RC-53D. Figure 8: Placing the Button Cap 6. Remove the protective foils from both sides of the Perspex (acrylic glass) windows. 7. Remove the protective foils from both displays. 8. Place the faceplate on the RC-53D so that the four screw mounting holes are aligned. 9. Insert the four mounting screws and tighten with a screwdriver. 10. Install the volume cont

  • Operating the RC-53D K-NET™ Auxiliary Control Panel 9 9 7 Operating the RC-53D K-NET™ Auxiliary Control Panel In the following example 1 (illustrated in Figure 9), the auxiliary control panel is labeled with specific functions and each button is programmed 2 to perform several tasks 3 as defined in Table 4. Table 4: The Commands Configuration The Label The Macro Sequence

  • KRAMER: SIMPLE CREATIVE TECHNOLOGY Technical Specifications 10 8 Technical Specifications Table 5 defines the technical specifications. Table 5: Technical Specifications 1 of the RC-53D K-NET™ Auxiliary Control Panel PORTS: 2 K-NET on terminal block connectors; 1USB connector, 1 RS-232 on terminal block connector (factory use only) POWER SOURCE: 12V DC, 1

  • Kramer RC-53D, Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: [email protected] P/N: 2900-000567 REV 4 For the latest information on our products and a list of Kramer distributors, visit our Web site www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Caution Safety Warning: Disconnect the unit from the power supply before opening/servicing. P/N: 2900- 000567 Rev: 4 im Ve

More Instructions:

DOWNLOAD

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Qlogic HP A5820 Switch Series Datasheet qlogic/hp-a5820-switch-series-5IF.pdf 02 Mar 2023 7 0.38 Mb
2 Worcester 240 Combi BF Installation and servicing instructions worcester/240-combi-bf-79S.pdf 25 Jul 2023 36
3 IMC Networks iMcV-Gigabit Operation manual imc-networks/imcv-gigabit-L3T.pdf 27 Dec 2022 8
4 Dynex DX-LDVD19-10A - 19" LCD TV Operation & user’s manual dynex/dx-ldvd19-10a-19-lcd-tv-2Y2.pdf 14 Nov 2022 36 5.94 Mb
5 Hitachi CP-X2530WN Specification hitachi/cp-x2530wn-7SG.pdf 12 Oct 2022 1 0.27 Mb
6 NETGEAR WN3100RP Operation & user’s manual netgear/wn3100rp-BMS.pdf 12 Jan 2024 47

Similar Resources:

  • Marine

    ComNav CT2-40A

    (11 pages)
    Marine Ltd. CT2-40A MOTOR CONTROLLER PART NUMBER 20350001 DOCUMENT PART NUMBER 29010024 ComNavR Permanent Magnet z Shunt Field Compound z D.C. Motors ComNavInstallation Instructions Version 3.3 ComNav Marine Ltd. #15-13511 Crestwood Place. Richmond, B.C. Canada. V6V-2G1 Telephone: 604-207-1600 Facsimile: 604-207-8008 Web: www.comnavm …
  • Prolon

    M2000 SERIES

    (18 pages)
    HARDWARE GUIDEChiller Controller M2000 SeriesSpecifications and Operational GuideREV. 7.3.4PL-HRDW-CHL-M2000-C/F-ENwww.proloncontrols.com | [email protected] 510, rue Charles, Suite 100, Mirabel, QC, J7J 1X9 …
  • Rockwell Automation

    ics triplex AADvance

    (130 pages)
    AADvance The Next Step in Automation AADvance Controller System Build ManualSystem Build ManualSystem Build ManualSystem Build Manual Issue: 08Issue: 08Issue: 08Issue: 08 DOCUMENT: 553632DOCUMENT: 553632DOCUMENT: 553632DOCUMENT: 553632 ((((ICSTTICSTTICSTTICSTT----RM448_EN_PRM448_EN_PRM448_EN_PRM448_EN_P)))) …
  • Spirax Sarco

    3000 Series

    (44 pages)
    3.814.5275.901Ed. / Issue 5 - 2018© Copyright 2009EXPERTISE SOLUTIONS SUSTAINABILITYRegistratori, regolatori pneumatici Serie 3000Istruzioni di installazione e manutenzionePneumatic Controllers and Recorders Series 3000Installation and Maintenance Instructions …
  • Condair

    Links Series

    (40 pages)
    2584458-G EN 1902Humidication and Evaporative CoolingMODBUSAddendum manual for installation and operation for use with DL, ME, RS, EL and RO-A devices as of software 5.8.x.xModbus …
  • Carrier

    33CS

    (32 pages)
    Installation, Service, andTroubleshooting InstructionsCONTENTSPageGENERAL ...................................2TEMP System Components ...................2INSTALLATION .............................2-4Thermostat Placement .......................2Wiring Requirements .........................2Relay Pack Installation .......................4Wiring Connections .... …

Comments, Questions and Opinions: